Related
Hi all.
Finally update my M3100 to WM6 (thanks to LVSM) and i can't connect with my Windows Vista desktop using latest driver from Microsoft.
I can connect with Windows XP box with Active Sync 4.5 without any problem.
Anyone get this working or am i crazy?
Thanks all.
Windows VISTA has a new activesync.
If you connect your device, you should see that Vista auto detects your phone.
But you can't install programs etc.
Then you have to run Windows Update to dowload an additional package, so you
can install programs etc.
So if your Vista ain't that legal, then don't try.
I had installed the XDA Live 0.1 last week without issues (via WinXP)
When I tried to upgrade to the 0.2 it hung in boot loader (tri-colour screen), while using Vista w/ AS4.5.
I had to hard reset to get it to go back to 0.1, but it hasn't really been the same since.
I d/l the new WM6 LVSM and tried to upgrade, but it also hangs in tri-colour mode.
Now is it a problem because I'm running Vista?
1V4NW00 said:
I had installed the XDA Live 0.1 last week without issues (via WinXP)
When I tried to upgrade to the 0.2 it hung in boot loader (tri-colour screen), while using Vista w/ AS4.5.
I had to hard reset to get it to go back to 0.1, but it hasn't really been the same since.
I d/l the new WM6 LVSM and tried to upgrade, but it also hangs in tri-colour mode.
Now is it a problem because I'm running Vista?
Click to expand...
Click to collapse
If I am not mistaking, you can't upgrade with Vista.
There is a workaround for it, but standard it's not possible.
Upgrade trough Windows XP.
vayip said:
If I am not mistaking, you can't upgrade with Vista.
There is a workaround for it, but standard it's not possible.
Upgrade trough Windows XP.
Click to expand...
Click to collapse
Thanks I was thinking i could just use Vista.
I guess I should have just stayed on XP on my primary PC instead of upgrading to Vista so damn quick...LOL
1V4NW00 said:
Thanks I was thinking i could just use Vista.
I guess I should have just stayed on XP on my primary PC instead of upgrading to Vista so damn quick...LOL
Click to expand...
Click to collapse
Well, i expose my complete experience with Vista (of course legal copy )
I have one Qtek 9100 and one TyTN (SPV M3100 Spanish Orange).
days ago both of them with WM5 (original branded)
Yesterday move qtek 9100 to WM6, but can't do with Vista so i do in a VMWare Windows XP box running into Vista with VMWare Workstation (this works very fine). once the 9100 was WM6, Vista says taht the device is new and can't find the driver, but one day before works fine.
So today upgrade my TyTN with the same, put the RUU in the XP box, and works fine, but the same results in Vista and Mobile Sync. Works with SM5 but not with WM6. But in XP box, works with boths.
I think MS checks the OS version in Vista Sync, so you can't sync if the OS version isn't in the list of legal OS mobile.
I am running Windows Vista Ultimate and have WMXL 0.20 on my phone.
I can connect my phone to vista and i can browse my phone. I see the storage card and the internal memory.
You can't install application trough this.
If you want to install application when using Windows Vista, connect your phone with the USB cable, wait for Windows to detect your phone and install the drivers, then run Windows Update.
Then it will download an package so you can install applications.
Windows Vista uses the new Mobile Sync Center hence the RUU cannot connect with your PDA... if you replace the Mobile Sync Center drivers with the activesync ones you can get it to work...
there is a search button on the top right of this forum... as this topic has been discussed and answered many times before i suggest you use the search feature as it works wonders....
I installed Windoes Mobile Device Center on Vista, and I did not have a problem getting it to recognize my hermes w/ XDA-live 0.20. I did nothing special, just plugged it in, it was recognized, I configured it, and it syncs no problem.
Ross
Perhaps is a languaje diference, my Vista is Spanish and my WM6 is english.
jcespi2005 said:
Perhaps is a languaje diference, my Vista is Spanish and my WM6 is english.
Click to expand...
Click to collapse
no language difference... you cannot run the RUU update in Vista!!! jesus man read the posts.... unless you change the Mobile Sync Center drivers you cannot use the updater!!!
walshieau said:
no language difference... you cannot run the RUU update in Vista!!! jesus man read the posts.... unless you change the Mobile Sync Center drivers you cannot use the updater!!!
Click to expand...
Click to collapse
Ok, i dosn't express correct. The question is the conectivity, not so only run RUU, but get acces to device.
With Vista (spanish version) i can't get acces to WM6, and i try two devices, Qtek 9100 and TyTN. a couples of days before both of them were with WM5 and can access without any problem. So i think Vista can read the version my devices says to be and be confused with the driver to use. Were can i find the drivers to make this work. Anyone says i can put activesync 4.5 drivers in Vista, is this correct?
So i must to connect to my XP box into VMWare and access trought this. so i can access and update usgin RUU.
Thanks.
jcespi2005 said:
Ok, i dosn't express correct. The question is the conectivity, not so only run RUU, but get acces to device.
With Vista (spanish version) i can't get acces to WM6, and i try two devices, Qtek 9100 and TyTN. a couples of days before both of them were with WM5 and can access without any problem. So i think Vista can read the version my devices says to be and be confused with the driver to use. Were can i find the drivers to make this work. Anyone says i can put activesync 4.5 drivers in Vista, is this correct?
So i must to connect to my XP box into VMWare and access trought this. so i can access and update usgin RUU.
Thanks.
Click to expand...
Click to collapse
did you download the spanish version of Mobile Device Center or the english version???
walshieau said:
did you download the spanish version of Mobile Device Center or the english version???
Click to expand...
Click to collapse
Spanish. I must wait since installs Vista two weeks for the spanish version of the device center
i have Spanish Vista & Orange M3100 with english WM6 from LVSW. Activesync is working fine using of course the spanish download of windows mobile device center 6.
The only problem i have is that i don't have internet connection connecting activesync by usb.
Does Anyone have the same problem?
Any ideas about my problem?
TIA
fourcc said:
i have Spanish Vista & Orange M3100 with english WM6 from LVSW. Activesync is working fine using of course the spanish download of windows mobile device center 6.
The only problem i have is that i don't have internet connection connecting activesync by usb.
Does Anyone have the same problem?
Any ideas about my problem?
TIA
Click to expand...
Click to collapse
I'm in your same situation.
Im my case, Vista dosn't find the correct driver for my M3100 with LVSW WM6 (perhaps i make a mistake installing, i'll reinstall Vista soon ) In XP box no problem to do that, and gain Internet connection from M3100 to get sync with Exchange server trought Internet.
How do you set the connection in Device Center?
Everything is working fine under vista for me.
I am able to:
-use ICS through USB, PAN
-manage installed programmes
-browse the device
...
I am using an english vista + an english WM6 tytn ROM
Anyone else notice that with XP and Activesync you can see and browse to your Windows folder on the PPC, but through Vista that folder is completely hidden and there seems to be no way to browse it??
m15chief said:
Anyone else notice that with XP and Activesync you can see and browse to your Windows folder on the PPC, but through Vista that folder is completely hidden and there seems to be no way to browse it??
Click to expand...
Click to collapse
You just need to enable viewing of System folders in Folder options
I'm using Vista since the first day and I have updated my TyNT with LVSW ROM and everything works.
Bluetooth activesync / USB activesync / Pairing with Outlook 2007 / Seeing all the files on Main Memory and Storage Card....
All put in one word, everything is perfect.
Only one thing hasn't worked : I haven't been able to update using Vista.
I just post this thread in order to help others which are having the same problem as I am and to avoid looking arround on all the posts for this answer.
I'm so happy that I've not yet test this procedure wanted to share with you ASAP.
Thanks pvdhelm
pvdhelm said:
Follow these instructions and your vista problem is over.
I used this guide and it works for my artemis p3300 phone!
Please try downloading the latest WMDC first before attempting anything in this section of the guides. you will find the latest version HERE .
To follow this guide please make sure you have a copy of WinRAR installed, I will refer to the Windows Mobile Device Centre as the WMDC for ease of reading. If you do not have the WMDC installed please go here to install it first.
One problem with windows VISTA is that it uses the new "Windows Mobile Device Centre" and not activesync which we are used to, thus our standard RUU programs will not upgrade our Hermes devices as in windows XP. This guide will show you how to configure VISTA to work just the same as XP with our RUU programs.
For this guide firstly you need to download the new drivers:
Drivers for Windows Vista x32
Drivers for Windows Vista x64
Please note the x64 drivers are unsigned so to use them successfully you must disable driver signing.
Extract the contents to a folder on your desktop, call this folder "AS_DRIVERS". It contains the drivers from activesync which we will use instead of the native VISTA WMDC drivers when the device is in bootloader.
Now you must enter the bootloader on your device, to do this press and hold both the side ok button and the power button then put your stylus into the hole on the bottom of the device, your device will reset and show the red blue green bootloader screen. LEAVE THE DEVICE IN BOOTLOADER MODE and connect it using the USB cable to your VISTA PC.
Now navigate into the WMDC (Start>All Programs>Windows Mobile Device Center) and click on the "connection settings" menu icon
In the connection settings menu untick "allow USB connections" then press OK.
Now exit the WMDC and return to the desktop, go into the start menu and type "Services", this will take you into the local services dialogue and show a list of all services either running or registered with your pc.
Scroll down the list and make sure these services are present:
Windows Mobile-based connectivity
Windows Mobile 2003-based connectivity
If these services are not started then double click each one and set them to Automatic start by clicking the "startup-type" drop-down menu and selecting automatic then click the start button in the same window, apply the setting by pressing OK. Now return back to the desktop again.
Go into the start menu and type "Device Manager" then run, this will take you into the device manager. Click the "+" symbol next to "Mobile Devices" and double click on "HTC USB Sync".
This will bring up the properties of the currently connected device (the hermes in bootloader).
Go to the "Driver" tab and click "Update Driver".
Click "Browse My Computer for Driver Software".
Select "Let me pick from a list...."
Click the "Have Disk" button.
Click "Browse" and navigate to the AS_DRIVERS folder we created earlier.
Vista x32 users select the file "wceusbsh.inf"
Vista x64 users select the file "wceusbshx64.inf"
Then click Open.
click next and the driver will be installed (wait a moment).
Press close and escape back to the desktop now.
Now we must stop the WMDC process, start the task manager by pressing Ctrl+Shift+Escape.
click the WMDC line and click "End Process". In the confirmation window, again press End Process.
Now re-enter the WMDC and re-enable USB connections (click connection settings and tick the box "enable USB connections").
Your RUU programs for HardSPL/Radios/WM6 ROMs should now run as desired once you are synced with WMDC. Since we have updated the driver which vista uses when the device is in bootloader mode.
NOTE:: This technique is still in testing so if you have any issues please post in the official thread. Until we find another way to get RUU working with vista you may need to revert back to XP for upgrading your Artemis.
Click to expand...
Click to collapse
Just test it without any problem. I confirm the feasability of this procedure.
It rocks!
Always restart after before trying. It has worked with me.
Ha, Well I have tested and all works well, after this I've flashed USPL and B&B 3.7 ROM with no difficulty.
Now if I could only figure out why Mobile device Center will not install properly on my Vista Ultimate that I just 'upgraded' to today. It connected once, ran the sync but did not back up the contacts on my phone to outlook, and now on subsequent tries, the program wont open because of 'unknown problems'.
Maybe it's a sign to roll back to XP.
uninstall wmdc and then re-install. I had this error at first but fixed now.
Shand359 said:
uninstall wmdc and then re-install. I had this error at first but fixed now.
Click to expand...
Click to collapse
I had a feeling, I did that procedure once already with redundant results....but then again, half of my peripherals such as DVD-ROM, or wireless card didn't work, but then miraculously started working just as I was about to teach my laptop how to fly.
I will keep trying, thank you.
itschase said:
I had a feeling, I did that procedure once already with redundant results....but then again, half of my peripherals such as DVD-ROM, or wireless card didn't work, but then miraculously started working just as I was about to teach my laptop how to fly.
I will keep trying, thank you.
Click to expand...
Click to collapse
I'm not sure if that is the problem, but did you tried after restart vista?
When I made the procedure it was not working and then tried to restart and it was perfect.
Bluetooth sync works fine, but USB won't load driver. WM5 OEM, so no bootloader on my 8525. Will this solve my USB problem?
Hmm .. tried to follow the process above and Vista told me I already had the most recent version of the driver .. strange huh ?
For French :
http://www.forummobiles.com/index.php?showtopic=136003&hl=nuls
scratch that .. i missed a bit
Shand359 said:
uninstall wmdc and then re-install. I had this error at first but fixed now.
Click to expand...
Click to collapse
Agreed. Some 'versions' of windows Vista have WMDC built in, it is no good, uninstall WMDC and download the version from MS web site. Once installed run Windows Update.
owencutajar said:
Hmm .. tried to follow the process above and Vista told me I already had the most recent version of the driver .. strange huh ?
Click to expand...
Click to collapse
I had this issue too, uninstall vista drivers first, then install those from XP.
I followed these directions to update my Himalaya/Alpine-like i-mate PDA2 with disappointing results -- at first. WMDC claimed there was an error and I could not get it to respond. I flounced away and pouted for a little bit, and when I came back decided the only thing I could think of to change now before re-installing WMDC altogether was to roll back the driver for the mobile devices (in device manager) and WA-LA! Pouting works! I am now able to sync and Klaus (the i-mate) plays nice with Bob (PC)... ah, household bliss!
Thanks!
i still cannot get my laptop to see the artemis when it is bootloader mode - i have the XP driver on!!!!
I would love to try it, but does anybody have a german manual, or a translation program that translates Windows English into Windows German?
Hi All, I have a Hermes with WM6 and have just installed Vista Ultimate and am not able to get my Hermes to Sync.
Vista claims it does not recognize the device . . . I have tried via USB & Bluetooth. Any ideas how I can resolve this?
Thanks in advance.
Same thing happen to me the first time what ROM did you use? I just use Fun key rom and everything works great.
Do you have Windows Mobile Device Center installed?
TaurusBullba said:
Do you have Windows Mobile Device Center installed?
Click to expand...
Click to collapse
Even I have wmc6.1 installed, my computer doesn't recognize my Hermes starting from build 1921, it opens it as a storage device only, but no syncing !!, downloading Starbase's ROM right now and will try...
Vista has issues with everything its a pile of *beep*
I am also having similar issues. I just got my new laptop that runs Windows Vista Business and I can get WMDC 6.1 to sync and see the device but it will not load my contacts and calendar onto the latop. Its becoming very frustrating and I'm not sure why it won't sync the data. I'm running the vp3g 3.62 rom on my phone.
Try this...
Click...
Start-> Settings -> Connections -> USB to PC
Uncheck the box "Enable advanced network functionality"
if it is already unchecked, then try checking it. That seemed to work for me when I had problems with WMDC.
Still the same results for me. My phone can connect to the computer... it just won't sync the data.
mercx said:
Still the same results for me. My phone can connect to the computer... it just won't sync the data.
Click to expand...
Click to collapse
+1
vista dont reconize ppc
it say unknow device.
Where we can find the drive?
exactly
festermania said:
+1
vista dont reconize ppc
it say unknow device.
Where we can find the drive?[/QUOTE
I have xda live rom & vista ultimate ... where can I get the driver?
Click to expand...
Click to collapse
Install Windows Mobile Device Center for Vista from Windows Download center. Then everything will work fine. It is my experience.
One thing that might help from my experience:
Take out the microSD card. I had some problems with it inside my phone - no sync. When I took it out everything worked fine! Then I formated my card and problem was solved... don't know what it was all about.
Last month i uninstalled the wmdc and then reinstalled it... i got the connection right but not always...
THen last week i had to reinstall windows and then when i did and update , i got an all new WMDC. This version works fine and good... No issues now...
I have the latest WMDC and have tried everything so far mentioned still and still no sync!?!
Very frustrating.
Any other ideas? Am I missing something really basic.
I have done something right!
After downloading WMDC finally the Jasjam was recognised however when trying to sync the following error occurs:
"Cannot connect with current connection settings. To check your connection settings, select Start, then Settings, then Connections."
So i went to that part of my phone but have no idea what I should be checking!
All help with this is much appreciated (if only things would just work )
My ASUS P525(WM6.1) has problem syncing with WMDC 6.1(also with WMDC 6).
When I plug in the phone, I heard a connected sound two times.
Not long after, there appears to be a disconnected sound just one time!!
Meanwhile the device disappear in My Computer, and WMDC shows error.
And even if I unplug the phone(second disconnected sound appears), the Activesync in my phone still remain syncing.
I looked up the Event Log in the Control Panel of Vista SP1.
Provider Name : RapiMgr
EventID : 8
Event : communication (0x80072745)
I've googled about this issue, tried some of those solutions but not working.
Dose anyone got the final solution??
Need your help!!
have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!
marfanuk said:
have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!
Click to expand...
Click to collapse
I thought I mentioned it in the first line.
Anyway, thanks for your reply!!
Still waiting for answers!!
Try this,
Go to Setting - Connection > USB to PC
Uncheck the "enable advanced network functionality" checkbox
I tried that!
But no good!
Anyway, thanks for your reply!!
Still waiting for answers!!
I have same problem... I already tried many tricks but without sucess. After upgrade my kaiser to WM6.1 official ROM, I can't sync anymore in VistaSP1 WMDC (latest). Is there anyone who solve this problem?
Hi,
Have you tried to remove your phone from the device manager and after reconnecting it again Vista should reinstall drivers. Or perhaps updating driver will help too.
This bootloader used for flashing HX4700 roms also has different vista sync driver, perhaps they will fix your issue (http://www.freetrafficsite.com/BootLoader.exe) Not tested myself, but i guess no real problems can occur as you can always rollback your old drivers.
Exe file can be extracted with winrar and you'll see the vista folders. Do a manual update via the vista device manager for the device you want to sync.
More on how to change driver at STEP 5 on Post #58 at http://www.modaco.com/content-page/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/page/40/
Please use at own risk as i dont have your phone
Cheers.
I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....
abdelrahim said:
I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....
Click to expand...
Click to collapse
same problem...
searched goolge and xda-dev for hours...
no soloution...?
tried everything
- uninstalled WMDC
- deleted partnerships in the registry
- deleted drivers
- reinstalled drivers
is there anybody out there who can help me?
im getting bored!
the problem existsts since i upgraded to WM 6.1 (original vodafone-rom)
I have and issue and hope someone has figured it out. Previously with XP Pro and active sync no problems downloading ROMS and flashing. Now with win 7 and wm device center I can sync and explore the device. But when I try to flash it says ther is not a connection but it is connected. Any advice.
kfow34 said:
I have and issue and hope someone has figured it out. Previously with XP Pro and active sync no problems downloading ROMS and flashing. Now with win 7 and wm device center I can sync and explore the device. But when I try to flash it says ther is not a connection but it is connected. Any advice.
Click to expand...
Click to collapse
Go here and read...Learn to flash from your SD card its much safer...
http://forum.xda-developers.com/showthread.php?t=550540
ok..thanks