Related
can anyone help me out here??? im trying to install the battery status cab for my wing but when i open it all it does link me to an internet page with the codes and doesnt actually boot an install
anyone know what im doing wrong???
The trick with .cab files is to open them on your DEVICE, not your computer.
Use activesync to connect to your Wing, then go to My Computer.
There should be an icon that says "mobile device". Click on that. Drag the .cab file to a place on the device that is easy to remember. Then go to the location of your Wing and open it simply by clicking (tapping) it.
No offense, but if you don't know this, you shouldn't Overclocking yet.
no i see what your saying, look this is what i did i downloaded the file extracted it with rar then put the files into their own folder on my storage card and i tried tapping it but it just brings up that stupid web page, i know alot about the phone and ive overclocked others before i just cant get this stupid cab to work
wow never mind i didnt know you werent supposed to extract the file ha i feel like an idiot
There are alot of "guides" to getting Touchflo on your Hermes. All of them not too easy to follow. problems / bugfixes are hard to find info on i.e. solve.
Please can someone put together a comprehensive easy to follow guide?
Ta...
download this cab and install.
go to file explorer and the go to my device page.
now open program files.
now open FTouchFlo file.
Cut FTouchFlo (NOT FTouchFlo Config File).
Back up to dir my device and open windows dir.
now open startup file.
now paste FTouchFlo File here.
Now copy FtouchFlo File and go back to the file you cut FTouchFlo from
and paste a shortcut there.
once this is done open config file and adjust the delay like you want to.
once this is done soft reset and enjoy touch flo scrolling only.
cube i am still working on but no luck at this time.
I followed your instructions to the letter on my Tytn Hermes200, and on start up after a SR I get a error. It says...
FTouchFlo Error
Can't read configuration
You said this...
Now copy FtouchFlo File and go back to the file you cut FTouchFlo from
and paste a shortcut there.
I tried placing a Shortcut in the programs FTouch folder AND I also have a COPY of the file in there now, and I get the same error !
You said this...
once this is done open config file and adjust the delay like you want to.
I think this has something to do with it, right? I do not know the setting to change or what value to make it work in the note file. Can you please tell me?
gemblaster said:
I followed your instructions to the letter on my Tytn Hermes200, and on start up after a SR I get a error. It says...
FTouchFlo Error
Can't read configuration
You said this...
Now copy FtouchFlo File and go back to the file you cut FTouchFlo from
and paste a shortcut there.
I tried placing a Shortcut in the programs FTouch folder AND I also have a COPY of the file in there now, and I get the same error !
You said this...
once this is done open config file and adjust the delay like you want to.
I think this has something to do with it, right? I do not know the setting to change or what value to make it work in the note file. Can you please tell me?
Click to expand...
Click to collapse
when you edited the config file you probibly saved it as a word file instead of keeping it intact, which would result in that erro
reinstall it and when you go to save the file dont save it as a word file, keep it intact.
Awesome work. Very easy to do and works well. I no longer have to use Pocket CM!
Hi, i tried to use Slither's Cube Launcher with Schaps RC 4.0 Version. This Cube launcher uses FTouchFlo too.
Didn't work, because the Path to AdobeFlashLite doesn't exist in Schaps ROM (But it's inside the ROM)
Reason: No File exists
DownUpApp: /Program Files/Adobe/FlashLite/saplaywm.exe
So I installed Adobe Flash Lite 2.1 as a cab and then it does work, but it only opens the "Cube" which has no function. Buttons do not work and doesn't rotate.
Has somebody tried to use Slither's Cube with Hermes? Does anybody have a working Config file?
I like the app, because i lost my stylus and FTouchFlo is working well, but Cube as addon would be great.
This is a timely thread. I too have tried to install touchflo and got nowhere fast.
So someone coming along and offering simple, bullet proof instructions is a godsend. Thank you sir!
I will try this later; just trying to decide whether to move roms to schaps 4.0 or not. Decisions, decisions...
WB
shanetheclassic said:
when you edited the config file you probibly saved it as a word file instead of keeping it intact, which would result in that erro
reinstall it and when you go to save the file dont save it as a word file, keep it intact.
Click to expand...
Click to collapse
The only file I saw that was able to be edited was mentioned in the instructions here....
Cut FTouchFlo (NOT FTouchFlo Config File).
So i DID NOT EDIT or move THE CONFIG FILE. I only looked in it after I got the first error as the instructions seem to mention changing the delay responce time.
Am I missing something else here? I am sorry if it is obvious but I am just not seeing it.
Thanks
Gem
The movement of the .exe file to the startup folder is obviously so it starts automatically everytime you reset.
This can also be achieved by using MemMaid (add a startup link it's straightforwards in the software) or by creating a shortcut in Resco Explorer. This way you dont need to move the original file yet still get the automatic start.
I like to TouchFlo cab, but it seems to make my HTC Camera Album not function 100%. Am I the only one? So I've kept iContact, as it dosent mess with Camera Almun and I love the way it scrolls.
If I could get TouchFlo to work and not mess with any of my other apps I'd love to keep it.
RojasTKD said:
I like to TouchFlo cab, but it seems to make my HTC Camera Album not function 100%. Am I the only one? So I've kept iContact, as it dosent mess with Camera Almun and I love the way it scrolls.
If I could get TouchFlo to work and not mess with any of my other apps I'd love to keep it.
Click to expand...
Click to collapse
I have no such a problem, even though I did not even put a HTC Camera Album to be ignored by the fTouchFlo. You can try to edit the fTouchFlo config by adding HTC Camera to the ignored apps list. Let us know the result...
UPDATE!!! Directions = WORKS a TREAT:-D
Sorry guys, and THANKS for all your HELP! I just removed FTouchFlo ver 1.3 (was using as it worked good for me and didn't get around to installing the latest), and installed the latest Version 1.4. Followed the instructions as I did before and WORKS A TREAT 1st SR!!! YA! This is a great tip .
Thanks for all!
Gem
FTouchFlo Ver1.4 ONLY works this way! Note to others who may have older versions
Hey guys i edited the cab file.
You just need to install it and do a soft reset..
After this TouchFlo should be working on your hermes rom!
For me it works on my own rom
Hi Pay87, I would want ask You if your TouchFLO cab it's customizable like on Schap's 4.22 ROM.
Thank's.
Hey! Can I change my start menu button image on wm6.1? I mean is there this image exist somewhere in the windows folder so I can replace it like the boot screen? (without any 3rd party apps like wisbar)
Thank you!
TKL
any idea?
2 ways useing the program called wisbar google it
or make your own rom from scratch and hack some dll which include the image you can also find a description somewhere in the forum which dll not for most peoples though
but which dll..I'm gonna search the forum for this. Thank you!
Rudegar said:
2 ways useing the program called wisbar google it
or make your own rom from scratch and hack some dll which include the image you can also find a description somewhere in the forum which dll not for most peoples though
Click to expand...
Click to collapse
i can't say for sure but i think its the shellres.dll file that has the image in it
Where is shellres.dll located?? I can't find it.
Edit: I found it And how can I replace the image in the dll? I can't even copy it out from the windows folder... I tried with total commander but no luck :S
as i said you have to cook your own rom from scratch on the computer to get the dll into it
pretty much what all the people who make roms in this forum does so as i said it's not something for the most users
you can prob read about how start learning to cook roms in the wiki pages of your device
you can do this without cooking it into the rom. With WM6 the file is shellres.96.dll. Use reshacker to replace icon number 288, then you must "sign" the DLL using this:
http://forum.xda-developers.com/showpost.php?p=1262575&postcount=1
finally, copy it into the windows folder (you may have to rename the old one first)
soft reset and you should be good to go!
since you're having problems copying it I've attached a copy
BTW if you do this and it screws up your title bar icons it probably means that WM6.1 uses a different DLL. To fix it just delete or rename the DLL and reset.
i looked for this file on my wing (it has wm6) and there is a file named shellresapps.96.dll, so i am sure that it's probably not the same file....and it will not allow me to copy it to my pc so i can look inside of it, any ideas?
More help
I tried with replacing icon but it seems rshacker doesn't save that.
i mean icon not changed.
i used a 21x21 icon its of same size of original one.
please help
joemanb said:
you can do this without cooking it into the rom. With WM6 the file is shellres.96.dll. Use reshacker to replace icon number 288, then you must "sign" the DLL using this:
http://forum.xda-developers.com/showpost.php?p=1262575&postcount=1
finally, copy it into the windows folder (you may have to rename the old one first)
soft reset and you should be good to go!
since you're having problems copying it I've attached a copy
BTW if you do this and it screws up your title bar icons it probably means that WM6.1 uses a different DLL. To fix it just delete or rename the DLL and reset.
Click to expand...
Click to collapse
I'm gonna give this a try later, thx!
mailforkrishna said:
I tried with replacing icon but it seems rshacker doesn't save that.
i mean icon not changed.
i used a 21x21 icon its of same size of original one.
please help
Click to expand...
Click to collapse
hmmm..? my icon is 21x18 and it worked in ResHacker
I have the 6.5 rom by nfsfan. Is there a way i can change the registry or settings somewhere so that when i go to the music tab it launches S2P instead of WMP?
The link that is launched is hard coded into manilla. The only way around that is to change the link that is opened. You can use something like vjbrisk to change any actual link - for instance, you can use it to replace the actual wmp.exe (or whatever it is called) in windows so that anything that tries to open that link will instead open S2P. This is problematic, though, if you wanted to continue using WMP for other things in the future. Erasing vjbrisk from the windows folder restores the original link that was replaced automatically, so you don't have to worry about messing stuff up. Use something like total commander or resco explorer to overwrite files in the windows directory.
thanks for the reply!
Hey all,
I need alittle help, And yes I looked but nothing is giving me a clear answer in my searches and doesnt seem to be helping me find a way to do this to test things out.
I have been really annoyed with the 2.5 HTC Message Bug/Lag/Error/Whatever, and I have been searching thru the EU rom for hours/days, and I wanted to try some things out, but I've run across a problem. I am testing out possibly seeing is maybe the problem is maybe xml pages, so I want to play around with them and find the association as to why hitting the send key loads the msgs instantly while not doing so takes forever to load. I have a spare tp2 to do testing. But when I try to replace xml pages, it will deny me from doing so. for example, I was trying to replace the htcMsgbox.xml but everytime I try I get this error:
A system file name "htcmsgbox" already exists replacing old file with new file, I say yes, then I get this msg: "Cannot copy "htcmsgbox" access denied.
Obviously its a system file and cant be replace by normal means, so my question is how does one replace these files? I tried total commander to try and open the file to edit it, but that failed too. So can someone tell me how it can be done if at all? I even tried going into the bootloader to see if I could replace files, but that didnt work too, and searching here unless you hit the right keyword isnt giving me an answer.
I guess my question is how to replace any system file be it XML or exe, I know some can be done by disabling Manila, but how of the others?
Thanx for the response.
42 views and no answer? Okay then *Bump*
I don't think it's possible.
I believe that the only way to get at those ROM-locked files, is to open it up in a kitchen...and even then I'm not sure that everything is accessbile
Would the SDKCert cab allow me to replace the XML pages? I would think that when you reboot the phone and go to the home screen the Msging app isnt loaded so why would the xml pages be locked from being changed, when there is other xml pages for other apps in the system not loaded and you can alter them? I am not a programmer right off the bat, but I noticed little stupid things which knowing how Windows works would cause programs or aml pages that would normally seem okay because it runs, window would run it slower because it cant translate something that didnt even have anything to do with the mail xml page or the program, and I found a couple of xml pages that have these stupid errors and thought of replacing them to see if that could be the case, I can copy them off the phone fine, but I cant replace them to test my theories out.
Help!
AngelDeath said:
Hey all,
I need alittle help, And yes I looked but nothing is giving me a clear answer in my searches and doesnt seem to be helping me find a way to do this to test things out.
I have been really annoyed with the 2.5 HTC Message Bug/Lag/Error/Whatever, and I have been searching thru the EU rom for hours/days, and I wanted to try some things out, but I've run across a problem. I am testing out possibly seeing is maybe the problem is maybe xml pages, so I want to play around with them and find the association as to why hitting the send key loads the msgs instantly while not doing so takes forever to load. I have a spare tp2 to do testing. But when I try to replace xml pages, it will deny me from doing so. for example, I was trying to replace the htcMsgbox.xml but everytime I try I get this error:
A system file name "htcmsgbox" already exists replacing old file with new file, I say yes, then I get this msg: "Cannot copy "htcmsgbox" access denied.
Obviously its a system file and cant be replace by normal means, so my question is how does one replace these files? I tried total commander to try and open the file to edit it, but that failed too. So can someone tell me how it can be done if at all? I even tried going into the bootloader to see if I could replace files, but that didnt work too, and searching here unless you hit the right keyword isnt giving me an answer.
I guess my question is how to replace any system file be it XML or exe, I know some can be done by disabling Manila, but how of the others?
Thanx for the response.
Click to expand...
Click to collapse
You generally can overwrite ROM files with the same file name in the same directory. If you want to modify a file, copy it to your storage card, change the properties to not be "read only", then copy it back to the former location.
This won't work for any system files that are actually in use.
In your case, it appears that "htcmsgbox" is being used by the system. I think you might be able to get past this particular one by disabling the HTC notifications system. Do a search - it is a registry mod.
Okay the notification system you wouldnt be by chance talking about the events notification for sms mms email reminders would you? And I made the change on my desktop then copied it back to storage and then tried to overwrite the file, but I did change the attrib back to read only before trying to copy it back...
Most of the XML pages used by HTC is in use
sigh....