Develop Bugs

automatic install without hacking rom!

Hi Folks,
i found a trick to make an autoinstall from strorage card (like from extended Rom)!
autorun.exe looks for the file config.txt on the place is in registry stored in:
"HKLM\Comm"
"AutoRunCFG" = "\Speicherkarte\Autoinstall\config.txt"
so i changed the registry entry and now i am able to put config.txt and the files to install on every place i want.
on windows Mobile 2003 devices this works wonderful!
on problem i have now with windows mobile 5 devices:
when installing a question appears where to store files (device or storage card)!
can anybody help me to get rid of this question during automatic cab install??
i want install all cab files to device without any questions!!

pbelcl: apologies for my ignorance, but is this very different to a 2577 folder?
with a 2577 cab we could use this info:
http://forum.xda-developers.com/viewtopic.php?p=225375#225375
and choose a default install folder I think for WM5.
V

Thanks for your quick answer!
i read the other tread and if i understood it right i have to remove the .dll file from my cabs?
i'll try this and tell you if it worked ....

I think the other way round.
I've never done it before, but you need to make a custom cab and .inf file, and specify the installation location in therere, and then the "choose a location" dialog doesn't come up. I'm not sure, I'll try this at home later.
V

vijay555 said:
...I'll try this at home later.
Click to expand...
Click to collapse
Thanks, that would be interesting for me because i cant generate cab files because i hav no developer software for this.
i also have access to a cab file manager (at a customer) where i can edit the cab files and change them as i need it.
if it is possible to generate an "empty" cab file for me that would be nice ....

pbelcl: I never use the cabwizard either, I use cab manager. To make an empty cab, take any normal cab (download one of mine?) and just remove all the files from it. That's what I always do!
V

vijay555 said:
.just remove all the files from it. That's what I always do!V
Click to expand...
Click to collapse
ok, this is also my way to get an empty cab file
there is one question interesting:
Sometimes there is a "CheckFile.exe" and a "CeSetup.dll" in the cab file.
Do i need them for any work during install this cabfile or can i delete them also?

I remove everything from my cabs, and then use cab manager and drag and drop stuff. So I've never used those files. I will have to read up on how to make a "normal", but I don't think they're necessary if you didn't put them in there!
V

Hi folks,
again my last problem with automatic install on WM5 devices:
when my automatism starts to install the cab files (from where ever) each time there comes a popup windows where to install the cabfile (storage card or device).
for my routines it is not important becaue most of my cab files only set some registry keys and dont install files on the device!
Does anybody know how i can get rid of this window and install the files to device WITHOUT question popup window??

a few issues with wm6.1

i installed the kavana 6.1, and i have to say it works great, but there are a few quirks that are making me mad and maybe some of you guys have a fix for them:
gmail imap:
i did the [email protected] (or whatever you want as your domain) trick, and then going back to chnage it back to gmail, that works. but th ename of my mailbox is gmool.com and i cannot change it at all through account settings. registry hack?
i have a t-mobile dash, so pressing and holding the J button, or using alt-J should give me an @, but it gives me the GB pound sign, the & sign gives me the @. keyboard remap? reg hack?
other than that, it works great.

Y
kchau said:
i installed the kavana 6.1, and i have to say it works great, but there are a few quirks that are making me mad and maybe some of you guys have a fix for them:
gmail imap:
i did the [email protected] (or whatever you want as your domain) trick, and then going back to chnage it back to gmail, that works. but th ename of my mailbox is gmool.com and i cannot change it at all through account settings. registry hack?
i have a t-mobile dash, so pressing and holding the J button, or using alt-J should give me an @, but it gives me the GB pound sign, the & sign gives me the @. keyboard remap? reg hack?
other than that, it works great.
Click to expand...
Click to collapse
You can fix the keyboard crap by going in to resco explorer, opening program files, finding et9 and changing the icons in your notepad(your j,k,l,m will be all messed up as well)... or you can over write with this file...

nlarge said:
Y
You can fix the keyboard crap by going in to resco explorer, opening program files, finding et9 and changing the icons in your notepad(your j,k,l,m will be all messed up as well)... or you can over write with this file...
Click to expand...
Click to collapse
what is this et9 you speak of, i dont have anything in my program files except for communication, connections, and wmp
edit: nvm found it in the windows folder.
is there any way to make the clock in the top bar 12hr intead of 24 hr?

kchau said:
what is this et9 you speak of, i dont have anything in my program files except for communication, connections, and wmp
Click to expand...
Click to collapse
Take the file above and drop it in the windows directory of your phone and overwrite the old one. That will fix your characters.

My device won't let me overwrite the eT9.Excalibur.0409.kmap.txt file. I think that's because it's burned into the firmware. I kinda expected this when you guys said to overwrite the file in the \windows folder. How do I update the file to get the correct keyboard mapping?
Also, it appears the 0409 file has the correct mapping. It's the 0408 file that's wrong. I tried updating that file on the device. Of course, I had the same problem saving the updated 0408 because I couldn't write it into the firmware.

resco explorer should allow the overwrite.....

OK, I got it. Another message in this thread said to update the file in the \windows folder. I updated the file in \program files\et9 and I was fine. Thanks for the help.

How to change start menu button image on wm6.1?

Hey! Can I change my start menu button image on wm6.1? I mean is there this image exist somewhere in the windows folder so I can replace it like the boot screen? (without any 3rd party apps like wisbar)
Thank you!
TKL

any idea?

2 ways useing the program called wisbar google it
or make your own rom from scratch and hack some dll which include the image you can also find a description somewhere in the forum which dll not for most peoples though

but which dll..I'm gonna search the forum for this. Thank you!

Rudegar said:
2 ways useing the program called wisbar google it
or make your own rom from scratch and hack some dll which include the image you can also find a description somewhere in the forum which dll not for most peoples though
Click to expand...
Click to collapse
i can't say for sure but i think its the shellres.dll file that has the image in it

Where is shellres.dll located?? I can't find it.
Edit: I found it And how can I replace the image in the dll? I can't even copy it out from the windows folder... I tried with total commander but no luck :S

as i said you have to cook your own rom from scratch on the computer to get the dll into it
pretty much what all the people who make roms in this forum does so as i said it's not something for the most users
you can prob read about how start learning to cook roms in the wiki pages of your device

you can do this without cooking it into the rom. With WM6 the file is shellres.96.dll. Use reshacker to replace icon number 288, then you must "sign" the DLL using this:
http://forum.xda-developers.com/showpost.php?p=1262575&postcount=1
finally, copy it into the windows folder (you may have to rename the old one first)
soft reset and you should be good to go!
since you're having problems copying it I've attached a copy
BTW if you do this and it screws up your title bar icons it probably means that WM6.1 uses a different DLL. To fix it just delete or rename the DLL and reset.

i looked for this file on my wing (it has wm6) and there is a file named shellresapps.96.dll, so i am sure that it's probably not the same file....and it will not allow me to copy it to my pc so i can look inside of it, any ideas?

More help
I tried with replacing icon but it seems rshacker doesn't save that.
i mean icon not changed.
i used a 21x21 icon its of same size of original one.
please help

joemanb said:
you can do this without cooking it into the rom. With WM6 the file is shellres.96.dll. Use reshacker to replace icon number 288, then you must "sign" the DLL using this:
http://forum.xda-developers.com/showpost.php?p=1262575&postcount=1
finally, copy it into the windows folder (you may have to rename the old one first)
soft reset and you should be good to go!
since you're having problems copying it I've attached a copy
BTW if you do this and it screws up your title bar icons it probably means that WM6.1 uses a different DLL. To fix it just delete or rename the DLL and reset.
Click to expand...
Click to collapse
I'm gonna give this a try later, thx!

mailforkrishna said:
I tried with replacing icon but it seems rshacker doesn't save that.
i mean icon not changed.
i used a 21x21 icon its of same size of original one.
please help
Click to expand...
Click to collapse
hmmm..? my icon is 21x18 and it worked in ResHacker

Howto Uninstall Max Manila?

I tried installing Max manila on my TP2, but I must have used the wrong version. When the phone boots, it gets stuck at the "Touch here to launch HTC Sense" prompt.
I can get into the programs menu, but not into Settings. How can I uninstall this CAB if I can't get into Settings?
Tried looking at the original thread, but at 96 pages, the signal-to-noise ratio is just too low, and you can't find anything! Hence this new thread.
I really don't want to have to do a hard-reset!

if it is getting stuck at starting manilla you should still be able to click on the windows start button where you can get into the settings/home sections. From here untick sense and restart the device so it starts properly without starting sense. Remove manmanilla from remove programs option and then reinstall the working version.
Alternatively reflash your rom.

stoolzo said:
if it is getting stuck at starting manilla you should still be able to click on the windows start button where you can get into the settings/home sections. From here untick sense and restart the device so it starts properly without starting sense. Remove manmanilla from remove programs option and then reinstall the working version.
Alternatively reflash your rom.
Click to expand...
Click to collapse
In WM6.5, there is no settings entry on the start menu. There must be a series of steps for deleting files and changing registry sessions that could be done manually if only one knew how.

There is a settings shortcut in WM 6.5, however in some roms the chefs have this shortcut pointing to the manila settings tab instead of WM settings dir. Obviously if manila won't load then this shortcut won't work for you anyway. Unfortunately I have no idea how to get that settings shortcut back on the start menu and working for you :/ You could use Total Commander to manually delete all of the files altered by MaxManila and then soft reset - your phone will then restore the rom's original files. There are a lot of files in MaxManila though, so it might take a while to hunt them all down. Use aiCabExplorer to open MaxManila's cab file and get the names of all the files to delete.

millski said:
There is a settings shortcut in WM 6.5, however in some roms the chefs have this shortcut pointing to the manila settings tab instead of WM settings dir. Obviously if manila won't load then this shortcut won't work for you anyway. Unfortunately I have no idea how to get that settings shortcut back on the start menu and working for you :/ You could use Total Commander to manually delete all of the files altered by MaxManila and then soft reset - your phone will then restore the rom's original files. There are a lot of files in MaxManila though, so it might take a while to hunt them all down. Use aiCabExplorer to open MaxManila's cab file and get the names of all the files to delete.
Click to expand...
Click to collapse
I tried renaming all the files and registry keys obviously associated with MaxManila, with no luck. I don't know how the files in the CAB get installed, but I searched for half a dozen of them and they were nowhere to be found.

klausner said:
I tried renaming all the files and registry keys obviously associated with MaxManila, with no luck. I don't know how the files in the CAB get installed, but I searched for half a dozen of them and they were nowhere to be found.
Click to expand...
Click to collapse
Did you use Total Commander? File explorer isn't powerful enough to edit system files

millski said:
Did you use Total Commander? File explorer isn't powerful enough to edit system files
Click to expand...
Click to collapse
TC for the registry, Resco for the files, but I have it set to show all types.

Well I've just checked - I can see and delete all of the MaxManila files in my windows dir except the homeservice.dll using TC. Don't know what else to suggest; there must be a way to get back the settings shortcut (?)

To get settings, change registry as shown:
Code:
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo]
"HideSettings"=dword:00000000

23088_Mega_WWE_3G Slightly Changed

Hi All
I made some changes to 23088_Mega_WWE_3G by TAI (http://forum.xda-developers.com/showthread.php?t=458456&highlight=core+21869)
Apps removed: iContact, FingerKeyboard, Skyfire and Showcase.
Changed couple of manila files:
-Removed clock background from homepage
-Changed manila slider and tab background
Changed splash screen (sample below)
Images are not mine, can't remember exactly where I got them from.
For the purpose I used ROMDonald kitchen (http://forum.xda-developers.com/showthread.php?t=319970)
All credit goes to TAI (thank you for all the great ROMs).
Download ROM: http://rapidshare.com/files/415414292/23088_Mega_WWE_3G_Pharmakos.rar.html
In case you're looking to have Solitaire and BubbleBreaker, below the links for the cab files.
http://rapidshare.com/files/409328143/BubbleBreaker.cab.html
http://rapidshare.com/files/409242652/MSsolitaire.cab.html
Disclaimer: I flashed it to my device and so far has been working with no remarks for about a month now. However, use at your own risk.
Notes: After you flash, you should update weather from weather tab, once updated, go to: Start>Connections and click on "Weather". This is necessary for the weather info on homescreen to be updated, also if you don't do this before re-starting the device or before turning off, when you restart again manila won't load.
Recommendations:
1.This ROM has very low reception with radio 1.56.70.11, I recommend to use radio 1.47.30.10 (link available below).
2. If you do task 28 wit MTTY before flashing this ROM, please flash OEM Stripped AT&T and then flash 23088_Mega_WWE_3G (link available below).
http://rapidshare.com/files/415417539/HERM_Radio_Only_1.47.30.10_CustomRUU.rar.html
Att stripped: http://rapidshare.com/files/415708972/att_striped.rar.html

reserved for future comments

Will be tested

Hi Pharmako,
thanks for your work.
Can You please tell me how to remove programs from the Dump folder?
I've dumped the ROM with ROMDonald kitchen but I can't find any if the files or packages (like Skyfire) I would like to remove.
A second question is:
once removed a program or package in necessary to edit the registry?
Many thanks in advance!

I am so going to try this.
Thank you.

eryunt said:
Hi Pharmako,
thanks for your work.
Can You please tell me how to remove programs from the Dump folder?
I've dumped the ROM with ROMDonald kitchen but I can't find any if the files or packages (like Skyfire) I would like to remove.
A second question is:
once removed a program or package in necessary to edit the registry?
Many thanks in advance!
Click to expand...
Click to collapse
Hi, the easiest approach is to go into the dump folder first and search the files you want to remove by name, also when you're changing the registry you will need to search for the applications you want to remove and remove the whole key with whatever strings and dwords they might be under it. Finally when you're editing the "initflashfiles.dat" you should remove from there as well any entries referring to applications you want to remove, also the info in "initflashfiles.dat" will give more detailed info on all the files which are components of the apps you wish to remove, this way you can go back to the dump folder and search and remove the unwanted files.
Hope this helps.

Pharmako said:
Hi, the easiest approach is to go into the dump folder first and search the files you want to remove by name, also when you're changing the registry you will need to search for the applications you want to remove and remove the whole key with whatever strings and dwords they might be under it. Finally when you're editing the "initflashfiles.dat" you should remove from there as well any entries referring to applications you want to remove, also the info in "initflashfiles.dat" will give more detailed info on all the files which are components of the apps you wish to remove, this way you can go back to the dump folder and search and remove the unwanted files.
Hope this helps.
Click to expand...
Click to collapse
Thanks!
This is exactly what I wanted to know!

Ok I just installed it and seems to work great. Thank you for cleaning up this rom as now it seems perfect. I installed iphonetoday cab and it works great with this rom.
Thank you again man.

I'm trying to make the same thing with the Italian version..
Is there any 3G dialer working with this version, having the smart-dialing function too?
Any way to find and put the new version of Internet Explorer?

eryunt said:
I'm trying to make the same thing with the Italian version..
Is there any 3G dialer working with this version, having the smart-dialing function too?
Any way to find and put the new version of Internet Explorer?
Click to expand...
Click to collapse
Well, if it is video calling that you're trying to use, to be honest I wasn't using it as my mobile provider is not too reliable with 3G. The only dialer I installed was PhoneEx and I was very happy with it.
As for Internet Explorer I wouldn't know as I prefer Opera. You might find an Opera Mini, personally I was using "OperaMini-4.2-small", whoever you may find the latest version "10".

the image file is corrupt....cant install at all.

arty said:
the image file is corrupt....cant install at all.
Click to expand...
Click to collapse
Hi, have you tried to download again?
Anybody else having this issue?

yep...but since its zipped i dont think re-downloading helps that much when the content is alrdy corrupt

I just tested the file and its ok.
Download again and this time save on different folder and it should work.

bllohin said:
I just tested the file and its ok.
Download again and this time save on different folder and it should work.
Click to expand...
Click to collapse
bllohin thank you for testing.
arty hope it works for you. Worst case scenario, I could try to upload to mediafire as a mirror, just in case your issue turns out to be rapidshare.

Np, man, thank you for sharing your work.
In his case its just bad download and because its in windows cache it will be bad every time till he flushes cache or saves it elsewhere.

Pharmako said:
Hi, the easiest approach is to go into the dump folder first and search the files you want to remove by name, also when you're changing the registry you will need to search for the applications you want to remove and remove the whole key with whatever strings and dwords they might be under it. Finally when you're editing the "initflashfiles.dat" you should remove from there as well any entries referring to applications you want to remove, also the info in "initflashfiles.dat" will give more detailed info on all the files which are components of the apps you wish to remove, this way you can go back to the dump folder and search and remove the unwanted files.
Hope this helps.
Click to expand...
Click to collapse
Hi Pharmako,
I have a problem editing the registry.
I can easily convert the "default.hv" and "user.hv" files into "boot.rgu" files, but having opened the two "boot.rgu" and edited them with the notepad, even if I save them in "UNICODE" they change dimension end I have errors converting back to "user.hv" and "default.hv".
Even adding the first line "REGEDIT4" doesn't solve the problem.
Tried with WinXP notepae and also withe the "Notepad2"..
What is wrong?
Thanks

eryunt said:
Hi Pharmako,
I have a problem editing the registry.
I can easily convert the "default.hv" and "user.hv" files into "boot.rgu" files, but having opened the two "boot.rgu" and edited them with the notepad, even if I save them in "UNICODE" they change dimension end I have errors converting back to "user.hv" and "default.hv".
Even adding the first line "REGEDIT4" doesn't solve the problem.
Tried with WinXP notepae and also withe the "Notepad2"..
What is wrong?
Thanks
Click to expand...
Click to collapse
Hi eryunt,
I also had that issue. I thought that I had done something wrong along the way and I started the whole dumping, etc couple of times. Then finally I tried to first do all registry changes and then saving as > unicode. Meaning that I was first saving and then changing as described step by step in ROMDonald's manual.
So, bottom line: first do all changes to registry and then save as > unicode. And don't forget to add an extra line at the end of the text. Hope this works.

Pharmako said:
Hi eryunt,
I also had that issue. I thought that I had done something wrong along the way and I started the whole dumping, etc couple of times. Then finally I tried to first do all registry changes and then saving as > unicode. Meaning that I was first saving and then changing as described step by step in ROMDonald's manual.
So, bottom line: first do all changes to registry and then save as > unicode. And don't forget to add an extra line at the end of the text. Hope this works.
Click to expand...
Click to collapse
The problem is that in both ways I can't solve the problem.
First of all, is the line "REGEDIT4" on the top needed?
What I've noticed is that even the original boot.rgu, without any modification, can't be converted back into .hv file.
Looking at the text, after the modifications at the registry, when I save in UNICODE all blank lines disappear..
Moreover, when I open the boot.rgu file I already have a blank line at the bottom, I need to add another one?
Thanks Pharmako!

eryunt said:
The problem is that in both ways I can't solve the problem.
First of all, is the line "REGEDIT4" on the top needed?
What I've noticed is that even the original boot.rgu, without any modification, can't be converted back into .hv file.
Looking at the text, after the modifications at the registry, when I save in UNICODE all blank lines disappear..
Moreover, when I open the boot.rgu file I already have a blank line at the bottom, I need to add another one?
Thanks Pharmako!
Click to expand...
Click to collapse
Hi eryunt, "REGEDIT4" on the top is definitely neeed and even though you see already a blank line, still you need to add another one (know from experience ).
One more thing, once you edit the file, re-open it and look for the following: at the start of the file you will notice that there is certain character space (blanks) between registry values and after many many lines, somehow this spacing thrend dissapears, what you need to do is carefully check till the end of the file and repeat the spacing thrend were needed (I wish I had made a screen shot of this). You should be able to convert then without any further issues.
Please accept my apologies for not mentioning it before, but to be honest it kind of escaped my memmory in my previous post.
Wish you luck and if there's anything else I could help with, please let me know.