blueangel bluetooth serious problem - MDA III, XDA III, PDA2k, 9090 General

hi all
i hope someone here can help. for as long as ive searched through xda developers, ive not been able to find any answer..
my (handed down from dad) blueangel's bluetooth seems to be causing the problem..and this is across all of WM2003, 05 AND 06. although the issue is most sever on 03.
basically, when ON, IF it can be switched on at all, it seems to eat up all resources and slow everything down. and often times it just refuses to switch on. a reset doesnt always do the job so its very very annoying..
the problem actually applies to wifi too but i dont think it's as frequent.
i love the blueangel but this problem is just killing the experience.
thanks for your time.

Related

Bluetooth connection wizard starts only after soft reset...

Hi fellas, short time lurker, short time member... got my Qtek 9090 today... what an amazing device! I am in love with it... quite a change from my many previous phones... symbian, palm, BB....
However, I am experiencing this little problem. BT enables easily and quickly, but the config utilities dont enable unless I soft reset the device. After that, if I close it, I have to reset it again to open the BT utilities.
Any ideas???
I've got the latest BT stack, came stock w/the device, no need for any upgrades. The only thing is that I've still got the 1.12 radio... but I doubt that's causing any problems.
Thanks in advance...
18 views and no responses... guess I'm the sole sufferer of this little plague

Phone audio goes requiring reset

Hi
Ive had my SPVM2000 about a week now, I do like it, but am getting annoyed how many times I have to reset it.
Biggest problem is sometimes I can not here audio from the phone, bith in and out calls, The Mic is working and the volme control shows all the way up.
Only way to get it back is a reset.
The other problem is some times it runs slow, I do run a few apps, but even when I shut them down, I often have to do a rest to get it to respond in a reasonable time.
any clues, or can i check anything to give more info?
We had a thread on the 'no sound in call' problem. Last time I checked it, 76% of owners of this handset had the problem!
Updating ROM to 1.40 and Radio ROM to 1.13 seemed to solve it for me.
THe BA is slow by nature. Today screen plugins make it 10 times worse!
Radio 1.3 will solve the issue.
Being slow - It really depends on the type of apps you have in your PPC, especially on the 'today' screen. BA cannot be blamed for that

overclocking BA wm5.0 FLAW

ive found that by using mamiach overclock patch, that my machine does not speed up that much, but really, TBH i didnt think it needed it, i just tried it.
i found that the major flaw in this is with windows media player, when patch installed, the device screen turns itself off after a couple of mins, even with option to turn screen off is disabled. since i listen to my mp3's all the time, this was not a good thing, as this happened before i had to hard reset wm5.0 by cleaning reg hive etc, the problem disappeared and all was fine, until last nite when i installed it again, the problem started again. i soon realised that it only started doing this after i installed overclock patch, so quickly uninstalled it and reset, now its fine,
i can now listen to mp3's while my screen is switched off.
mamiach, if you read this, i know you work hard, and i know the patch works on some/most devices, but can you try and solve this little bug on your patch??? and once again, i know you have worked so hard in suppoting wm5 on BA you keep up the good work mate. 8)

Quick question for those of you using WM6!

Hi all,
As many of you have heard (or experienced), many Hermes units seem to exhibit less than stable behavior with the production WM5 ROM, or even some of the cool ones here.
Browsing the other forum, we are all to familiar with:
1 - Camera taking black pictures
2 - SD Card not recognized
3 - System hangs
4 - Unit gets very hot and drains battery
5 - Using the alarms is out of the question due to reliability
etc.
After two months of testing, I have two choices:
A - Go back to my Wizard 8125.
B - Move on up to WM6, and see if these issues will be resolved.
My question for those of you have taken the WM6 leap is:
"If you have experienced annoying system hangs, battery drains, and so forth, with WM5, have these issues been resolved when you upgraded to WM6?"
I want so badly to stick with the Hermes, and I'd love to learn all about the various WM6's ROMs... But not if this unit will be as unstable as before.
Any quick thoughts would be appreciated.
I'm ready to hit this forum and the wiki, and learn all there is to know about WM6... but NOT if this unit is still going act up.
I eagerly await your quick replies!
To be honest, I think WM6 is more stable overall compared to WM5 on my 8525.
I also have an 8125, and I have WM6 on that as well. The differences in functionality and the nice new interface are well worth it. The key (in my opinion) is to pick a ROM without all the extra 'garbage' added in, and be careful about the 3rd party apps you add. The core OS is very solid.
Generally speaking WM6 is faster with less hangs.
My only gripe with it is that after you have about 300 sms messages, typing gets slow .... like really delayed ... to solve this i turned the Autospeller thingy off, and it seems to be working flawlessly now!
Compatability is great, it actually just WORKS! .... *cough* most of the time *cough* ... no seriously it rarely hangs, and only the really old applications don't seem to run.
Alarms, christ don't get me started ... i personally just add a calender entry, with the alarm function turned on, it always works and reminds me 15 mins earlier than the desired time
My unit only gets hot while in my pocket a lot or while charging ... i have radio rom 1.41 and the battery life is good, but not as good, i advise 1.40 (for my device it worked best)
SD card not being recognised? never had that problem with WM6
Camera taking black pictures? ... well moving it out into the light generally helps, but out of 300 pictures so far none have been black!
i've also noticed that boot times are slightly quicker
and using IE is MUCH faster and smoother
WM6 is more visually pleasing and is smoother with less hangs. I'm using Sleuth's VARIANT of LVSW ... and its good, i'm an anti-black guy, Black just doesnt do it for me, too unreliable (IMHO!) but well done to JJ for it all, i'm not knocking him, just my personal experience
dropped calls or missed calls are a thing of the past with WM6, i suffered SO MANY during WM5 ... also the lack of OEM images is good, byebye orange customisations horay!! (backup your extended rom 1st, it might be useful later on)
i completely agree with the above statement.
WM6 is great. Haven't had any problems with it. but choose your ROM carefully. I use LVSW, and tried Black Dymond. Both were great, i personally had better luck with LVSW. Radio 1.41 seems to be working well for me, I haven't tried 1.40, so i can't speak to the battery life. make the WM6 jump. you won't be sorry.
WM6 works for me
I had some of the problems you described with WM5 that came with my JASJAM. I have since upgraded to WM6 using the Elf version of LSVW. It works very well for me so far. The only thing to watch out for is that after installing the WM6, it somehow changed the device id and my WebCamera Plus app would not activate anymore. I have to call the Ateksoft to issue me another activation code.
bchau said:
I had some of the problems you described with WM5 that came with my JASJAM. I have since upgraded to WM6 using the Elf version of LSVW. It works very well for me so far. The only thing to watch out for is that after installing the WM6, it somehow changed the device id and my WebCamera Plus app would not activate anymore. I have to call the Ateksoft to issue me another activation code.
Click to expand...
Click to collapse
There's always going to be these small problems with an upgrade, but i think it's still agreed that WM5 < WM6
Hey hey!
These first five posts are VERY encouraging!
I am starting to get excited about it now...!
I'll wait to see who else can offer their opinions.
Thanks guys for the great news!
Michael_514 said:
Hey hey!
These first five posts are VERY encouraging!
I am starting to get excited about it now...!
I'll wait to see who else can offer their opinions.
Thanks guys for the great news!
Click to expand...
Click to collapse
No one elses opinion matters.
My only regret with WM6 is not taking the plunge sooner. See my signature for my configuration.
I am using black dymond 3.5 for past two weeks now and so far it's just rock solid and fast. No hang ups. Quick response to buttons / commands. No drop calls. Smooth operations. Nice visual interface. No complaints what so ever.
My prior cingular rom was stable but too slow and clumsy.
Anybody who is confident in performing upgrade should do it especially as now the risk of bricking the device is very low with Hard SPL 2.10 Olipro.
My 2 cents
Michael_514 said:
Hi all,
A - Go back to my Wizard 8125.
Well, I must say that my experience has been awsome with many of the roms on my 8525 especially JJ's stuff, yes I am a devoted black follower . My experience with the wizard or 8125 was horrible, never modified it at all so i don't know how it does otherwise but I thought it was a piece of ****e.
In conclusion my advice is go wm6 and you will have a new addiction. It is faster, more memory and of course the many other perks like when you get to show your friends that your already runnin wm6 and their stuck with 5
Just follow the steps hard spl, radio then rom and you should be just fine.
I almost forgot, the only times I have experience problems/ instabilities was when I installed things to storage card rather than main memory.
Click to expand...
Click to collapse
I have SoftBank X01HT... I've just upgraded my ppc to Black diamond 3.5 and it works perfect... But I still had the same problem with capturing image in the dark place and it comes up with black picture.. the flash doesn't help at all.. it seems like it's not functional... I hope someone could help me with this... Any Advice? Please feel free to tell me.. I'm waiting.. thanks in advance....
Okay, guys!
I am sold!
I will do my readings; check out the various ROMs, and away I go!
And of course, Hard SPL is a must!
And I agree with the post a few posts back... I am all for a less bloated ROM.
I use my PPC for very specific tasks (Adobe Reader, Outlook, GPS, phone,voice command)... and the less junk/crap/freeware/shareware/malware/utils/bloatware/games I have installed, the better.
I will do some investigating, and I shall take the plunge!!!
Thanks!!!
Michael_514 said:
Hi all,
As many of you have heard (or experienced), many Hermes units seem to exhibit less than stable behavior with the production WM5 ROM, or even some of the cool ones here.
Browsing the other forum, we are all to familiar with:
1 - Camera taking black pictures
2 - SD Card not recognized
3 - System hangs
4 - Unit gets very hot and drains battery
5 - Using the alarms is out of the question due to reliability
etc.
After two months of testing, I have two choices:
A - Go back to my Wizard 8125.
B - Move on up to WM6, and see if these issues will be resolved.
My question for those of you have taken the WM6 leap is:
"If you have experienced annoying system hangs, battery drains, and so forth, with WM5, have these issues been resolved when you upgraded to WM6?"
I want so badly to stick with the Hermes, and I'd love to learn all about the various WM6's ROMs... But not if this unit will be as unstable as before.
Any quick thoughts would be appreciated.
I'm ready to hit this forum and the wiki, and learn all there is to know about WM6... but NOT if this unit is still going act up.
I eagerly await your quick replies!
Click to expand...
Click to collapse
Hi, I have similar problems. I am trying to find out what's going on and the symptoms are like you say: battery drains too fast. Let's say it the battery gets hot, there's something wrong. If you measure the current usage with ACBPowerMeter you will see a high load, like 300-400ma, even with all stuff off, radio off, wifi off, incoming beams off, bt off etc, nada. Now, if you pull out the battery, leave the device the some hours, then start again, power it up, activate GSM and everything, you should be luck and see a current of maybe as low as 30-60ma, even with full brightness on the display. And one time it was okay the whole day, but then all of a sudden, maybe after I hooked up with Activesync or got an SMS, it's gone bananas again.. sigh.. There's gotta be something strange that's completely wrong. I've tried many radios no difference, I've tried bandswitch to limit to GSM only as I live in a area with maybe not super quality 3G signal, did not sort out the problem yet. I had WM6 from LVSW 19-05-2007 with all kinds of radios, then moved on to Pro Black, same problem, but will no try black dymond as someone else mentioned problem was gone with that ROM.
Please all, anyone else with these problems? Any good ideas what this can be? If the device is off for a long time, and I mean off as in battery pulld out, what difference does that make to having the battery off a short while, let's say some minutes? Is there some memory-stuff here? My device is just a week old, never wanted to use a native language WM5 that was in it, hoping this problem will be fixed..
thanks
Update:
I happened to purchase a faulty device!!! There was indeed a HW error on my brand new device so I got it swapped with another one that works. Not all problems are SW-bugs..
I use WM6 on both my 8525's without significant probs; battery drain seems less with radio v.1.38 than 1.40 or greater although use Band Switch to keep phone on GSM when not cruising the net; initial boot up is faster; I've not had overheating probs, no micro SD card issues . Wish I'd gone to WM6 much sooner, but I think having the Cingular 8525 makes a big difference as well.
My battery gets hot and discharges too quick even with radio off. I've tried all radios, am at 1.34 now, will try the 1.43 later tonight if I am able to fully charge battery quick enough... The thing is, if I remove battery for some hours and start over, it's okay, 40ma, radio on etc. Then, at some random point in time, the phone can just lay on the table untouched, it starts consuming battery as crazy, 300-400ma, measured by ACB Power Meter. It's dricing me nuts... I've tried to kill processes, to watch what's going on... I don't have a clue yet, except from there's something "running wild"..
Update:
I happened to purchase a faulty device!!! There was indeed a HW error on my brand new device so I got it swapped with another one that works. Not all problems are SW-bugs..
Hi all!
Okay, I am taking the plunge!
I think I'll stick with Radio 1.40, which I have instealled. Hard SPL is also installed...
...so, the only decision is to figure out which ROM!
I have rounded the choice down to two, based on what I've read.
I'm either gonna go with LSVW or Elf's version of LSVW.
Both are downloaded and sitting on my hard drive, ready to roll.
I just hope I can still use PocketMirror; iGuidance; and spb Pocket Plus.
We shall see!!!!
Any final suggestions are welcome!!!
Thanks!
What have you got to lose?
Just follow MrVanx's guide and enjoy it.
Unwired,
You actually bring up an EXCELLENT question!
"What have I got to lose?"
The simple answer: Time!
As much as I enjoy my hobby that involves tweaking PC's, PocketPCs, laptops, gadgets, and so forth...
...I am an attorney and I do run a business.
This means my time is very important and quite valuable to me.
For every hour I spend tweaking; resintalling apps; customizing e-mail settings; testing the phone; resyncing my business contacts with PocketMirror; researching the proper registry hacks....
...that is an hour I lose making MONEY!
So... As much as I would lllllllove to play with and test single new ROM and its variant, and as much I enjoy spending my day enjoying playing with the latest and greatest operating systems...
It kills me when I can't service clients, and when I can't run my business, because I am busy YET AGAIN(!) resintalling my PocketPC.
That's why I love getting opinions before I move ahead...!
So there ya go... I have no time to lose!
GilesTheAlmighty said:
Generally speaking WM6 is faster with less hangs.
My only gripe with it is that after you have about 300 sms messages, typing gets slow .... like really delayed ... to solve this i turned the Autospeller thingy off, and it seems to be working flawlessly now!
Click to expand...
Click to collapse
Now i have arround 700 sms in the Inbox and about 500 in sent items, and typing works good for me, with autospell on... i keep copy of all SMS i send/receive since i get my first pda, my loved Wizard...
GilesTheAlmighty said:
Alarms, christ don't get me started ... i personally just add a calender entry, with the alarm function turned on, it always works and reminds me 15 mins earlier than the desired time
SD card not being recognised? never had that problem with WM6
Camera taking black pictures? ... well moving it out into the light generally helps, but out of 300 pictures so far none have been black!
i've also noticed that boot times are slightly quicker
and using IE is MUCH faster and smoother
WM6 is more visually pleasing and is smoother with less hangs. I'm using Sleuth's VARIANT of LVSW ... and its good, i'm an anti-black guy, Black just doesnt do it for me, too unreliable (IMHO!) but well done to JJ for it all, i'm not knocking him, just my personal experience
dropped calls or missed calls are a thing of the past with WM6, i suffered SO MANY during WM5 ... also the lack of OEM images is good, byebye orange customisations horay!! (backup your extended rom 1st, it might be useful later on)
Click to expand...
Click to collapse
Really the difference is not only the ROM you use, but what you do with the ROM...this causes ppl talking about one ROM so quick and other ROM so slow, if you take a search, someone (don't remember) make a speed test after HR every ROM, and the results shows the ROMs aren't so different.
Of course if you havn't time for this, this isn't your forum
Regards.

GPS fix issue

Hi all, i have tried to find similar thread with "search" before opening this one, but this function is not working right now to me.
The problem: usually my Artemis integrated GPS works very very well, for weeks (cold fix in not more than 2', also without downlaod of efemeridi, and hot fix very very fast, with 7-10 satellites hooked). But in some days/weeks/periods the gps doesn't work well. In particular the cold fix (first fix) needs some minutes (5'-10'), and once the fix happened, the signal of each satellite hooked is really poor, or the number of satellites hooked is low and instable; for eg the gps hook not more than 3-4 satellites, and loose and find the signal continuously. And also other fixes during the day ar slow if made just after few hours from first one.
The strange thing, as said before, is that usually the gps works very very well, for weeks. But expecially during the winter it happens that it works bad for days/weeks. And without any operation after some days/weeks it turn working very well again.
The issue don't seems to be linked with bad weather days. Can it be related with seasons and relative different position of satellites in the sky?
Untill now i never found other guys with a similar problem on their Artemis device. So now i ask here for support.
Which could be the problem? And which is the solution?
Thanks in advance for support!!
PS i use WM5 original. The issue happened since first year of life untill now (i just did an hard reset). And the issue happened both with TT6 and TT7 (just installed).

Categories

Resources