overclocking BA wm5.0 FLAW - MDA III, XDA III, PDA2k, 9090 General

ive found that by using mamiach overclock patch, that my machine does not speed up that much, but really, TBH i didnt think it needed it, i just tried it.
i found that the major flaw in this is with windows media player, when patch installed, the device screen turns itself off after a couple of mins, even with option to turn screen off is disabled. since i listen to my mp3's all the time, this was not a good thing, as this happened before i had to hard reset wm5.0 by cleaning reg hive etc, the problem disappeared and all was fine, until last nite when i installed it again, the problem started again. i soon realised that it only started doing this after i installed overclock patch, so quickly uninstalled it and reset, now its fine,
i can now listen to mp3's while my screen is switched off.
mamiach, if you read this, i know you work hard, and i know the patch works on some/most devices, but can you try and solve this little bug on your patch??? and once again, i know you have worked so hard in suppoting wm5 on BA you keep up the good work mate. 8)

Related

Phone audio goes requiring reset

Hi
Ive had my SPVM2000 about a week now, I do like it, but am getting annoyed how many times I have to reset it.
Biggest problem is sometimes I can not here audio from the phone, bith in and out calls, The Mic is working and the volme control shows all the way up.
Only way to get it back is a reset.
The other problem is some times it runs slow, I do run a few apps, but even when I shut them down, I often have to do a rest to get it to respond in a reasonable time.
any clues, or can i check anything to give more info?
We had a thread on the 'no sound in call' problem. Last time I checked it, 76% of owners of this handset had the problem!
Updating ROM to 1.40 and Radio ROM to 1.13 seemed to solve it for me.
THe BA is slow by nature. Today screen plugins make it 10 times worse!
Radio 1.3 will solve the issue.
Being slow - It really depends on the type of apps you have in your PPC, especially on the 'today' screen. BA cannot be blamed for that

Phone freezes when in standby

When ever the phone is in standby for a few minutes or so, it refuses to power back on when I press the power button. The only way to bring the phone back is a soft reset. While it is frozen in standby mode it does not receive phones calls, emails or texts. Im running lvsw 03-26. I noticed it didn’t happen with lvsw 3-20…but it was happening with both versions of xda live. I did a few hard resets to see if that will get rid of it…but nothing. I tried searching high and low on the site and even read wiki for answers but no one seems to know what is going on. I saw a few people post up the same issue but still no help….so I decided to open a new thread. Can anyone help?
It happens. Do you have a Storage Card in? If so, take it out for a while and see what happens. What 3rd party apps are you using too. I know Wisbar Advance causes this issue. Can you list what you're running and maybe I can see if you're having the same problem I was.
I've had the same problem with most WM6 roms. Having upgraded to BlackEd2.0 the problem seems to have gone though...
are you running a today plugin off storage card perhaps?
none of the roms i've tried had power on problems
Sometimes you can have that problem with having a cluttered SD Card or having a program that is accessing online in the background.
I have a 512 storage card. I’m not running much 3rd party apps…I have Mundu IM, Microsoft live search, Google maps, WM black commander, macromedia flash player active x…and that’s it. I Had mundu, live search and Google maps installed to my storage card. After reading rabanJR’s post, I uninstalled them from the card and installed them to the phone. I then went back to the card and deleted all program folders and files….I also did a general clean up of the card. Lets see what happens now.
Also to swampy…im not running much of anything on my today screen….just the messages, calendar and the com manager plug in that came with the rom. That’s all. Lets hope for the best.
Bad news, it froze up twice again today. I’m all out of ideas….any more suggestions?
funny thing, that just happened to me today. greed led was flashing, but i couldn't get out of standby mode without soft resetting. maybe some kinda software issue? Its the first time it's happened to me since going to wm6. i did notice it before however.
rzanology said:
Bad news, it froze up twice again today. I’m all out of ideas….any more suggestions?
Click to expand...
Click to collapse
maybe try a hard reset?
What Radio Rom?
Have you flashed a new radio lately? If not, what radio ROM version do you have? I had an issue with my TyTN that was definitely a radio issue. Flashed to 1.38.0.11 and haven't had a single issue with freezing since.
Just an idea, of course.
rzanology said:
Bad news, it froze up twice again today. I’m all out of ideas….any more suggestions?
Click to expand...
Click to collapse
yes sir...i tried many hard resets. A radio upgrade is one of the things i tried...i saw a few people trying it. i went to 1.34 though. im going to flash to 1.38 riiight now! im desperate right now. i'll let you know how it goes.
I had the same problem until I upgraded to black 2.0. I had the radio 1.38.0.11 from the time I upgraded to wm6 and my 8525 was freezing until upgrading to black 2.0 solved my problem.
well i have good news. i upgraded to LVSW(2007/04/08) last night...and so far so good. didnt freeze once today. hope the issue is gone for good. thanks all for the help.
same exact issue here running LVSW 03-26 (goes unresponsive while in standby, green blinking LED, soft reset to recover). 2gb card installed...i'll try removing it to see if freezes go away.
rzanology: if LVSW 04/08 fixes the issue, please post back and let us know!
installed (all to device, not card)
salling clicker
resco explorer/registry/ftp/today
kyphur hold comm button toggle
wmxl apps 8525 keyboard fix
shogun cing
will do...one more note...i updated to 1.38.11 i think it was. what funny is right after i updated the radio the phone froze on the first standby. while i was coming back to post i saw the new rom update for lvsw.
This has a been a long reported problem on WM6 ROMs. 'wont wake from sleep' is the common phrase. Radio and bacground app using net I think was the problem, but no real solution if I remember correctly. On LVSW 3 26 I have gone weeks without this though. In the beginning LVSW 3 26 still did the freeze but after a week it stopped and works pretty good now. Sounds like MS is behind it since it makes no sense at all. LOL.
rzanology said:
When ever the phone is in standby for a few minutes or so, it refuses to power back on when I press the power button. The only way to bring the phone back is a soft reset. While it is frozen in standby mode it does not receive phones calls, emails or texts. Im running lvsw 03-26. I noticed it didn’t happen with lvsw 3-20…but it was happening with both versions of xda live. I did a few hard resets to see if that will get rid of it…but nothing. I tried searching high and low on the site and even read wiki for answers but no one seems to know what is going on. I saw a few people post up the same issue but still no help….so I decided to open a new thread. Can anyone help?
Click to expand...
Click to collapse
Wow, I thought I was crazy becasue nobody mentioned this issue before. I had this problem from day 1.
However, i recently noticed that the 1.38 Radio was eating up my battery life and downgraded to 1.34. This combined with installing Black2.0 seems to have taken care of this problem. I just came back from a weekend away from my phone (which i know is a crime since it is so much fun to use) and it woke up right away.
What Radio do you have?
How long are your phones in standby when it happens?
well....bad news again. even after the new rom update it is still freezing. do you guys think this is hardware? I never froze on wm5...i can't see it being a hardware issue. im almost tempted to call cingular and have them send another one, but i dont know how to go back to wm5. for me, the phone will be in standby for 30 minutes or so....then wont turn back on. any more suggestions?
try disabling everything completely.
1 events and notifications
2 beam auto receive
3 bluetooth
4 wifi
5 put device into flight mode
6 all startup items (including those in rom) move to a temp for now
7 disable activesync
8 disable push email
9 disable all today items
1. disable error reporting customer experience
11 remove anything that reads the sd card
12 remove sd card entirely
13 remove sim card
literally disable everything that runs automatically or otherwise.
power down ur phone by pressing power button for 3 secs. shutdown. leave it for 20secs.
power it back up. then test it now.
if u have a problem now then it could be scary bear notifications fix only. u could have a notification queu problem that is causing ur device to contradicory items simultaneously.
this could be caused activesync so no matter which rom u use it comes back via activesync of calendar or tasks.
if at this stage its fixed then bring things back systematically with the most important first like the sim card. turn off flight mode
c how u go. sometimes pda just gets confused and doesnt wake up from a sleep to well (bit like me in the morning... sometimes bed and sleep is just way to good compared to work/life)...
good luck.

BUG wiith B&B 4.0

im sorry Admins if wasn't supposed to create a new thread for this subject, but its ma first thread.
Everytime you do a soft reset after loading a few applications on, e.g. real player, pim back up, tomtom, tcpmp, etc, the device does not load up. you have to do a hard reset, no mata how long you leave it. This is not just apparent on my device but a couple of others i have tested with. Couple of times when you soft reset, you may get away wid it, but eventually it will crash.
It worked fine when i first installed it and didnt have the need to soft reset it in the first few days, but eventually when i did, thats when i had the trouble. Since then i must have done 10 hard resets, reloaded the ROM on again still the same. like i said not just this device, but a ma brothers and ma frends device.
Ive had to revert back to the o2 ROM, because the last thing i want whilst im out and about, is to have to do a soft reset and it does not load and then have to end up doing hard reset. Not Ideal.
Hope Tom Can fix this issue for the next release.
if anyone else having same issue and has fixed it, let us know.
cheers
I had this problem 3 times, this time i removed everything in traylaunch (and removed the check to enable traylaunch) and it seems to have stopped it - over 9 days since now.
Also, haven't got batterystatus to overclock after reboot, just in case.
i have tried it without tray launch and the problem was still evident.. in anycase, i like the tray launch feature, so it wud be good to keep that there. with the 3 devices i tested it on, it semms to happen after installing a couple of applications. i realy like the features of the ROM, its just a shame it gets stuck after a soft reset.
TOM if ur out there, the n please respond with any advice, or whether ur gna have a fix
after reading feedback from other users, it does seem as the problem is with quite a few ppl, if not everyone. it seems to be the fact that this ROM does not like other applications being installed. without any applications it works fine, but as soon as you install something it goes dead.
i have no reverted back to o2 ROM. which is working great, but is just boring... lol
i must apologise 'Furbious' as you were right. it was tray launcher causing the problem... i have since re-installed b&b 4.0 took tick out of tray launcher and it works a treat...
just waiting for 4.1

mayor SOUND & CAMERA problem >please help if you can!

hi!
one day my BA stopped working. the only way to get out of that 2003 start screen was to upgrade it to wm 5.x later to 6.5
my problem is:
I have NO SOUND at all.
the camera fails to initialize.
the strange thing is: after upgrading the sound twice worked for a little while BUT stops working after using the wmp. and could not get back by reset, hardreset, reinstalling rom or whatever.
it seems that it is a hardware related software-problem?! a reg thing? a driver prob?
believe me: I searched and read a lot but didnt find any working solution! I tried the original wm 2003 rom. no effect.
I tried any audio-fix I could find, edited the reg (maybe not good enough...). nothing works. no effect.
audioprogs refuse to start like htc audiomanager (rc fail) or misses audioengine at tcpmp media player (no wave output). I guess the audioengine hangs at some point. also youtube refuses to work when sound doesnt worrk but runs good when sound is there
maybe it has to with storage. I could not get my storage back although I followed the wikis. (maybe I am just too confused after all the up/downgrades I already did... but as far as I remember the tools for that do not work for me)
also camera. nothing works. still fails to initialize.
any ideas?
I feel like I would need a mayor-maximum RESET... me, myself and my BA
then I found this:
The wierdest thing happened.
Have to say that none of the suggestions or ideas (though welcome) helped. I reflashed the WM6.1 after flashing latest radio rom. Still no sound and camera.
Last night I had kept the battery out for a few hours and then on replacing it had to do reset - hey presto after all this time the sound worked and so does the camera.???? I have absolutely no idea what I did to fix it - almost as if it needed resetting a few times - cant think what else I have done.
Anyway I am happy bunny now - it all seems to be working perfectly
Click to expand...
Click to collapse
I started to feel stupid because I never checked to leave the battery out for a while. so I did it and surprisingly my sound came back. but soon it dissappeared again. sometimes it comes back when I restart again and again and/or wait a little while with battery out. but camera stills fails and as long as it is a random thing if sound comes back or not it not a real solution...

Am I the only one who has touch-screen problems with the vogue on/off? Seriously..

I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..
mine is unresponsive sometimes and i have to tap on the back of the phone to get to work again. i thinks its going out soon
That's what I thought about my old one, I figured I had dropped it to much.. because I did lol but now I got a new one 2 weeks old and I'm running into the SAME problems.. I'm assuming I must be doing something wrong with how I've got **** set-up
j18yo said:
I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..
Click to expand...
Click to collapse
j18yo i think that your problem might be that to many programs run when you start your vogue that happened to me before and i hated it but then i heard of a program named "Space Reclaimer" FREE and it made my vogue much more responsive because the program stops any programs that start when you turn on your vogue or any windows mobile phone
I have the same problem usually under the same conditions. Mostly happens in the morning after the device has been off. Works fine for a few seconds then stops responding correctly i.e., the D-Pad stops scrolling correctly with a lag on touch response. I use CleanRAM and it still doesn't fix the prob once it occurs. Sometimes when I run CleanRAM it will occur. I've tried putting biotouch.exe and everyting BUT the kernel processes in the exceptions list and a Level 1 clean. Hard reset yesterday and haven't had the problem yet. If it continues to work, I'll post my settings.
BTW, I'm on a stock 6.1 ROM with a few apps.
j18yo said:
I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..
Click to expand...
Click to collapse
What ROM are you running? I asume that wehn your new device came you loaded it the same as the old one. It has to be something with the ROM you are runnning or a problem with a program causing your issue.
My phone would do this periodically too, with Vin's latest ROMs. I turned off Manila and am running Titanium now. Interestingly - no lags when unlocking since. I'll keep Titanium on for some time to see if that makes it go away. I had an issue with both his current v2 and v4 (which I am running now).
Ive had to replace my screen twice and the whole phone once because of touch screen problems. Thank God for the insurance.
Ah yes... to what OP mentioned:
I do not beleive it is a more pressure thing. I do not think it is more pressure that is required but rather that the phone is non responsive. If you are unlocking and typing a PIN, it takes the PIN and all but it takes perhaps one digit every 5 seconds. That's my experience anyway. So it is just slower, as if something was consuming the CPU and UI is not responsive.
crazylegs91 said:
I have the same problem usually under the same conditions. Mostly happens in the morning after the device has been off. Works fine for a few seconds then stops responding correctly i.e., the D-Pad stops scrolling correctly with a lag on touch response. I use CleanRAM and it still doesn't fix the prob once it occurs. Sometimes when I run CleanRAM it will occur. I've tried putting biotouch.exe and everyting BUT the kernel processes in the exceptions list and a Level 1 clean. Hard reset yesterday and haven't had the problem yet. If it continues to work, I'll post my settings.
BTW, I'm on a stock 6.1 ROM with a few apps.
Click to expand...
Click to collapse
THIS..
It has to be the problem.. I have CleanRAM run every 12 hours or 6 hours because I figured it would help.. lol but now your saying sometimes it happens WHEN you run cleanRAM.. Im assuming it does something, or erases something it shouldnt?
This is like the 1 sole thing I have run on a schedule, I've turned off my email and everything to manual, I went into my startup folder and there was about 4-5 things I didn't need which made the battery 100% better than it was in terms of how long it lasts.. and I set-up this CleanRAM schedule on my last phone I THINK I forgot but I do know as soon as I got this 1 going I did it and I'm bout to delete the program completely and see if it'll help, I have speedbooster too which does a cleanup too I'm curious if it would have the same result..
I'll let everyone know if this ended up being my problem incase anyones in the exact same boat with the same apps
PS: I was doing level 3 cleans
j18yo said:
THIS..
It has to be the problem.. I have CleanRAM run every 12 hours or 6 hours because I figured it would help.. lol but now your saying sometimes it happens WHEN you run cleanRAM.. Im assuming it does something, or erases something it shouldnt?
This is like the 1 sole thing I have run on a schedule, I've turned off my email and everything to manual, I went into my startup folder and there was about 4-5 things I didn't need which made the battery 100% better than it was in terms of how long it lasts.. and I set-up this CleanRAM schedule on my last phone I THINK I forgot but I do know as soon as I got this 1 going I did it and I'm bout to delete the program completely and see if it'll help, I have speedbooster too which does a cleanup too I'm curious if it would have the same result..
I'll let everyone know if this ended up being my problem incase anyones in the exact same boat with the same apps
PS: I was doing level 3 cleans
Click to expand...
Click to collapse
Update: I don't think CR erases things as much as it kills processes that won't restart. Thru trial and error, I've adjusted my CleanRAM settings to where I haven't had the problem for a couple of days. I'm able to do a Level 3 cleans on a once a night schedule and during the day if need be. In settings, I have it to close all apps, launch startup progs, and display today screen. I have no exceptions listed for either running progs or startup progs. I have the most up to date version from the OTA update in the program.
The program links in my StartUp folder are: poutlook (original on ROM), sddaemon (original on ROM), WLMUpdate (original on ROM), Glossybars.exe (I added this), biotouch.exe (I added as I thought CR killing this was the source of the problem), pocketwit.exe (I added), and SIPChange (I added).
One thing I did do was delete the link for TouchPal from the Startup folder. I did this for other reasons (I use FingerKeyBoard). Not sure if this was part of the problem.
I can scroll with d-pad and no touch lag.
On a side note, can I delete any of poutlook, sddaemon, or WLMUpdate from the startup folder to save battery power?
I'm probably just a bit above a newb so sorry if I don't make sense.
Update: Just for kicks, I deleted the links for glossybars.exe and pocketwit.exe from my StartUp and it started locking again after running CleanRAM. I put them back in and it works again even after running CleanRAM. Maybe someone with more knowledge can explain this. I'm just keeping it the way it is now...
Hmm weird that you removed something not very important like pocketwit an cleanram caused problems again.. someone has to have some info on this??
I deleted everything from my StartUp folder but my SPB Mobile Shell.. I didn't have sddaemon, but I did have poutlook and WLMUpdate both of which I deleted.. then I had some other programs that aren't necessary for the phone.. I have no problems on restart or anything, and the % showed being used is stays around the 30's now instead of 40s/50s.. and when I run programs it usually reachs 50% tops now instead of 60/70% I used to get.
PS: Pocketwit isnt bad I used to praise the program but now I've tried MoTweets and.. I can't think of the other one now.. ****.. it's really good though but it seems to use a lot more phone power than MoTweets so I went back to that.
Pocketwit kept giving me problems, started saying I need to install that NET 3.5 or whatever but when I try to it says I have a later version already so it won't install, then other times it'll work completely fine.. but MoTweets I like better anyways
Ok, I give up. I restored everything to the way I had it when it was working and now I'm having problems again. After the screen turns off and I turn it back on, it locks up and won't scroll and has the touch lag issue.
Hope someone figures this out. Shouldn't have messed with success. Good luck.
crazylegs91 said:
Ok, I give up. I restored everything to the way I had it when it was working and now I'm having problems again. After the screen turns off and I turn it back on, it locks up and won't scroll and has the touch lag issue.
Hope someone figures this out. Shouldn't have messed with success. Good luck.
Click to expand...
Click to collapse
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...
bigboy292000 said:
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...
Click to expand...
Click to collapse
I'm running a stock Sprint 6.1 ROM. Thanks though.
bigboy292000 said:
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...
Click to expand...
Click to collapse
I'm not using the TouchFLO interface, does that mean its still on though?
I'm not completely up on understanding all this
This was happening with Vin's Rom for me as well. I was tripping out pressing ON so many times with no screen showing up but phone light on! I believe it could be the power settings. I disabled the "Turn off device" which I believe was mentioned in his notes about the rom.
I gave up on this problem for a while but found something when researching how to disable to cube. I used the registry edit in this thread to disable to cube post #69. I didn't do any of the other steps because I'm not having memory probs (42% with pocketwit in the bckgrd).
http://forum.xda-developers.com/showthread.php?t=368269&page=7
I noticed that biotouch.exe never shows up in the running processes menu in CleanRAM and I don't have the "lock/freeze" scrolling problem any longer and I can run CleanRam without the problem occurring. I can press any item on the screen as well with no delayed response.
However, this stops you from being able to finger scroll and do the "side to side" scroll in Messaging. I never really finger scrolled and prefer using the d-pad for scrolling so losing that functionality isn't a big deal to me.
If anyone can figure out how to keep this working so smooth and have the option to finger scroll, I'd be much obliged. It just seems that biotouch.exe craps out sometimes and locks up the d-pad. If they could both work equally well....

Categories

Resources