blueangel glassdisplay cracked! - MDA III, XDA III, PDA2k, 9090 General

i've got this big ass crack on my display last night. the touchfunction dosn't work so I can't press my PINcode to access the telephone. how, where and how much can i replace the display?

gnops said:
i've got this big ass crack on my display last night. the touchfunction dosn't work so I can't press my PINcode to access the telephone. how, where and how much can i replace the display?
Click to expand...
Click to collapse
The best price I've seen for the touchscreen is on ebay. But, there are a few catches...
First issue: There are two different LCD/touchscreen assemblies that were used on the angel. One is made by Sony, the other by Toppoly. The touchscreen or LCD from one can not be used on the other due to programming and physical layout.
Second issue (and this is probably the biggest): The way they touch screen and the LCD are connected is a major pain in the arse to fix. It's a plastic ribbon cable that has been soldered to a point on another ribbon cable. Unless you are very good at soldering, it's not something I'd attempt due to the largish chance of melting the cables and making things worse, not to mention the potential to hurt the LCD itself.
If you look in the wiki under the hacks and tweaks, the Technical Stuff (including disassembly) link has two pages to look at:
Blue Angel/PPC6600 Disassembling Procedure with Pictures
Blue Angel Spare Screen
While they are not the best pictures, the last image under the disassembling section shows the ribbon cables I'm referring to, and the touchscreen assembly picture for the spare screen page shows a sony touchscreen ribbon cable detached from the LCD cable, which will show the connection points I'm referring to.
I've got this exact issue as well on my O2 branded angel. Due to the cost of a new LCD/touchscreen assembly (almost the cost of a working angel), I'm considering trying to solder a new touchscreen. If I ruin it, well, I've got parts for the next one I get.

I replaced a touch sreen today, its not that bad if you have soldered before. Unfortunatly the screen i got of ebay is not perfect and will need replacing. I have contacted the seller to see if he will send me another one.
Its worth doing!
Gary

Dimlow_uk said:
I replaced a touch sreen today, its not that bad if you have soldered before. Unfortunatly the screen i got of ebay is not perfect and will need replacing. I have contacted the seller to see if he will send me another one.
Its worth doing!
Gary
Click to expand...
Click to collapse
I've soldered plenty of times (a bit out of practice tho), but never something like that.
Any tips and suggestions? My main worry is melting the ribbon cables.

Well, no real tips, just take you time and don't rush it. The plastic can stand quite a bit of heat, i never managed to melt it, The job looks harder that it realy is. you will need a steady hand! Also , taping the connector down before you solder helps.
Gary

Dimlow_uk said:
Well, no real tips, just take you time and don't rush it. The plastic can stand quite a bit of heat, i never managed to melt it, The job looks harder that it realy is. you will need a steady hand! Also , taping the connector down before you solder helps.
Click to expand...
Click to collapse
Ok, that's good to know. The plastic didn't look all that durable, but if it's stouter than it looks, I may check with the house controller (aka CFO aka my wife ) and see if we can spare the dosh to pick one up.
I have to be careful as she wants it once it's fixed!

how do i separate touch screen and lcd? i only need to solder the new touch screen, right?

any help? thanks

pVilaça said:
how do i separate touch screen and lcd? i only need to solder the new touch screen, right?
Click to expand...
Click to collapse
There is a disassembly guide in the wiki.

What kind of screwdrivers are needed to remove those tiny screws on the LCD/ digitizer casing. I have 2 SX66's with broken LCDs and one with a broken digitizer. Time for some repairs.

jdc said:
The best price I've seen for the touchscreen is on ebay. But, there are a few catches...
First issue: There are two different LCD/touchscreen assemblies that were used on the angel. One is made by Sony, the other by Toppoly. The touchscreen or LCD from one can not be used on the other due to programming and physical layout.
Second issue (and this is probably the biggest): The way they touch screen and the LCD are connected is a major pain in the arse to fix. It's a plastic ribbon cable that has been soldered to a point on another ribbon cable. Unless you are very good at soldering, it's not something I'd attempt due to the largish chance of melting the cables and making things worse, not to mention the potential to hurt the LCD itself.
If you look in the wiki under the hacks and tweaks, the Technical Stuff (including disassembly) link has two pages to look at:
Blue Angel/PPC6600 Disassembling Procedure with Pictures
Blue Angel Spare Screen
While they are not the best pictures, the last image under the disassembling section shows the ribbon cables I'm referring to, and the touchscreen assembly picture for the spare screen page shows a sony touchscreen ribbon cable detached from the LCD cable, which will show the connection points I'm referring to.
I've got this exact issue as well on my O2 branded angel. Due to the cost of a new LCD/touchscreen assembly (almost the cost of a working angel), I'm considering trying to solder a new touchscreen. If I ruin it, well, I've got parts for the next one I get.
Click to expand...
Click to collapse
Hey MATE!! damn why didnt i ask this before!!!
i have the o2 xda IIs.. same problem, display works fine.. but tapping doesnt! after it was dropped!
Now, i got a guy to get a spare MDA T-mobile (blueangel) which doesnt work, but its lcd/touchscreen works.. i connected that LCD to my O2, it didnt WORK! how can i differentiate b/w the two LCDS?
i mean, how can i know that the LCD is made by Toppoly or Sony?! that'd be a great HELP!

SyNcViEw said:
i mean, how can i know that the LCD is made by Toppoly or Sony?! that'd be a great HELP!
Click to expand...
Click to collapse
Part numbers on the back or the cable design.
http://wiki.xda-developers.com/index.php?pagename=BlueangelLCD

TD035STED1
this is the code written behind my LCD. I have the O2 XDA IIs.
Is there anything else I need to look at aswell? or should I just buy a LCD with that code?!

SyNcViEw said:
TD035STED1
this is the code written behind my LCD. I have the O2 XDA IIs.
Click to expand...
Click to collapse
Interesting. Looks like the LCD used varies depending on when the phone was made.
My O2 has the Sony LCD.
SyNcViEw said:
Is there anything else I need to look at aswell? or should I just buy a LCD with that code?!
Click to expand...
Click to collapse
Cables and the wiki. The link I posted shows the difference between the two.
And yes, you will have to get the same LCD assembly/glass cover as what you have now. The two are not interchangeable.

There is a tool set you can purchase at radioshack that has the proper tip. Its a cheaply made tool but does the job. It is one of the kits with many bits. It would be the star tip. You can also order the tool online. I've taken mine apart a few times. Its sort of a pain but gets easier the more times you do it (replaced my screen three times). I have however, never been able to get the touch to work again because I can't really see how I would be able to solder such a fine ribbon. Ive had my mogul for almost a year and if my memory serves me the metallic strips are only about an 1/8th of an inch thick or less. I got lazy and put a piece of tape across the ribbon and put a small amount of glue to hold it down. Still didnt work. Didn't really expect it to either, but it was worth a shot. I turned it into insurance said I lost it and ended up with a broken 6600 and when I called to complain they sent me a mogul. So it's been awhile but I loved the phone. Hope this helps out.

dont scare the people
it can be replaced in 15 minutes with proper tools (screwdrivers)
i ve found some russian manual with pictures how to disasemble the BA (just look for it on the net) and its very easy, no need for soldering
there are 2 versions of displays, one have silver ribbon and the other have golden
when you opet your BA you ll see the display and the ribbon, also there is serial number of the display so you can check it too... all BA displays on the ebay have info about the ribbon and the serial number
I bought it for about 30$ and works perfectly, as original one...
buy digitizer and screen in one piece
you have to be total noob to have problems with changing of the display, so go for it !

If you are planning to replace the digitiser YES you do need to some fine soldering, all you need is the correct soldering iron tip for fine soldering and it is possible, done it about 4 times so far and everytime I promise myself not to brake it again but hahaha,
You can buy the LCD + digitiser together if you are unable to do soldering,
I use a razor which i took out from my shaver and thats what I use to seperate digitiser from lcd.
There are very cheap digitiser panels on EBAY, However some of these are not so good and ( digitiser is a 2 layer glass assy.) sometimes little area of this 2 layers stick together making touch screen non responsive.
Alternative is look out for spares, repairs sales if the screen is good buy it replace it, if you are a novice when it comes to these things, just take your time and dont rush it, even if it helps make little notes when you are opning the device as it ll make it easy when it comes to puting it back together.
And if you can get your hands on one keep a spare screen

Im sooo sad
I just cracked my screen I really hope I get a replacement cus I got more attached to my BA ever since I found out I could upgrade it. I thought it was not a biggie crashing it because I have dropped so many times and nothing happened but today something happened...

screen is 30$ at ebay, and no need to be sad, in few days it can be fixed

Related

SX66 Broken Touch Screen

Alright... so the other day i take my sx66 out of my pocket, only to see the touch screen cracked... the phone still works, most of the time, and you can still use like half of the screen. So i need to know, how hard is it to actually change out touch screens. Ive heard it is difficult, and would really like to know how to do it.
Thanks
-Greg
bigbluemnm said:
Alright... so the other day i take my sx66 out of my pocket, only to see the touch screen cracked... the phone still works, most of the time, and you can still use like half of the screen. So i need to know, how hard is it to actually change out touch screens. Ive heard it is difficult, and would really like to know how to do it.
Thanks
-Greg
Click to expand...
Click to collapse
We can repair the system for you. We do not have DIY kits for the TS repair though.
http://www.pocketpctechs.com/main~u...epairs-Full+Service+Repairs~item~XDA-TS03.htm
wow, wayyyy to expensive... you can almost buy another unit for that... i mean, i can buy the touch screen for ~$40, and do it myself. i heard it requires some soldering, and what else?
bigbluemnm said:
wow, wayyyy to expensive... you can almost buy another unit for that... i mean, i can buy the touch screen for ~$40, and do it myself. i heard it requires some soldering, and what else?
Click to expand...
Click to collapse
You can do it yourself. We've had people do it before. Some are successful, most end up causing more damage and have to ship it in anyway.
Here are some tips:
First, double-check the new TS. There are few different mfg of the TS. Some that we evaluated have fibers & dirt between the layers of the TS.
Be very careful with the flex cable coming off of the LCD. It runs through the slide mechanism and tears easily. You'll need to remove the LCM assembly from the top cover/slide assembly.
Use a soldering iron to desolder the TS cable from the back of the flex cable of the LCD. Use a xacto knife or something similiar to seperate the TS from the frame of the LCD. Usually the TS will shatter during this process. If you push the blade in too far, you'll scratch the top of the LCD which cannot be repaired. If you get the glue from the seal of the TS onto the LCD, you'll need to use 99.9% alcohol to clean the top of the LCD using a microfibre cloth. Having tweezers handy helps.
When you go to install the TS, start at the top and then slowly lower it onto the frame of the LCD. Do not push it all the way down. You'll probably have several bits of dust and debris that has been attracted to the TS. You'll need to have moisture free air to gently blow out the dust before pressing down and sealing the TS. We actually use grade 5 nitrogen to blow out the area.
When resoldering the cable do not apply too much heat since the mylar of the cable melts easily.
Hopefully with these tips and others on the board, you'll be successful.
thet doesnt sound hard at all. last night i already took it all apart, and didnt mess up anything. so hopefully i can get a new ts and get it back on without damaging anything. thanks so much for the info.
I got something really weird..
I have opened the unit and checked the configuration..
The old TS versus the new TS is totaly opposite?
Old 1 2 3 4
New 4 3 2 1
Pin configuration..
I manage to hook it up but it won't get pass the alignment screen.. is there a way to re-teach it?
Please help..
nique said:
I got something really weird..
I have opened the unit and checked the configuration..
The old TS versus the new TS is totaly opposite?
Old 1 2 3 4
New 4 3 2 1
Pin configuration..
I manage to hook it up but it won't get pass the alignment screen.. is there a way to re-teach it?
Please help..
Click to expand...
Click to collapse
If it will not align, then the pins are hooked up out of order or the TS is defective.
The interesting thing, there are different touchscreens, have different pinouts. The most important thing (from my experience) is to connect pairs properly. So, you have on touchscreen top, bottom (vertical pair), left and right (horizontal pair). If you'll look at touchscreen, you'll see how your cable is wired to glass/film. At first, you definitely need to put pairs properly. vertical to vertical (on board) and horizontal to horizontal. If you'll mix up wires - you'll fail calibration procedure.
By the way: if you'll mix up top and bottom or left and right - touchscreen will work and pass calibration. Of course, calibration values in registry will be hmm... other, than usual, but touchscreen will work.
If you have multimeter, you can easily check your tuuchscreen. Horizontal pair should be 250..400 Ohm, vertical - 300..800 Ohm. If your touchscreen is not tapped, there should be infinity (not connected) resistance between pairs.
Where can you buy replacement touchscreens or housings?
ebay. search for all the different models and use worlds like broke, dead, fix repair, etc. And if you buy the right touch screen then you don't need to do any soldering. It's a really simple job. The hardest part is the disasembly, but just take your time and for god sakes tape all your screws to a white peice of paper and label them :roll: i can't tell you how many integral screws i've lost doing stuff like this.
alright, so im getting ready to buy a new TS... the SN of my phone is... HT509D615597. so what TS would i need?
this one...
http://cgi.ebay.com/ws/eBayISAPI.dl...10024651851&rd=1&sspagename=STRK:MEWA:IT&rd=1
or this one...
http://cgi.ebay.com/ws/eBayISAPI.dl...ryProximity&refwidgettype=cross_promot_widget
Thanks!!

broke my touch screen. Can i please be helped.

ok i broke the touchscreen on my 02 xda11s. and i would like to know where to get one for relitivley cheap. any help would be greatly appriciated. also i would like to know if it is hard to dismantle. some pics would be nice but i dont want to ask to much.
thanks very much
paul sinclair.
Re Blue Angel Touch Screen
I also did the same with mine two weeks ago (Cracked the screen)
Took out the left hand screw of my XDA 2s and then took it back to O2 shop and made out that it was because the screw fell out that the screen broke I know its a bit naughty but I got mine replaced for a new one
Naughty indeed. i like the way you think though. the prob is i kinda know the fella in the shop. does it have to be the shop that i bought it in.?
craked screen
Dont think it matters as long as its a o2 shop (in my case)
I just took it to the shop with the warranty 2 weeks ago as i had droped the XDA i took out the top left hand screw and said because the screw was loose it made the screen crack when i touched it with the stylus.
They replaced it under the warranty for a nice brand new one.
Now got 2 batteries and 2 chargers.
mabye i'll just do that. i was gonna get a screen of e-bay. but your way sounds better
thanks
No probs good luck but remember that it is possiable that this could happen (Screw coming out screen cracks) So dont let O2 fob you off and say it is not coverd by the warranty because the situation can happen.
mine is cracked too, but i have to get one off ebay cause it's out of warranty
(only £20 though so not as bad as when i broke the actual lcd - that was £90)
Was the screen hard to replace?
the lcd was kinda easy, and that involved removing the touch screen so i guess not (my new touchscreen hasn't arrived yet)
did you get your touch screen ?was it easy to install ?
tattootroy said:
did you get your touch screen ?was it easy to install ?
Click to expand...
Click to collapse
I replaced my touchscreen (without LCD) by myself. It is not very hard. You have to solder 4 small cables. If you can handle the tiny screws and aren't afraid soldering 4 cables onto a 7 mm flatband cable. No Problem.
It is a little bit tricky to open the device because of the slider. The two cables of the slider are just plugged in onto the mainboard, so you can just pull them out with a screwdriver.
Plz help me........
Hello i m using O2 Xda IIs { Also Called HTC Blueangel }.
The problem is tht the strip on the back of the display { the strip which is broad } which joints with the board have a small scratch on it.... bcoz of which my display screen flicks n goes blank and many times touch screen doesnt works....
so plz can u help me with it....! wht shld i do ?
Will be waiting for ur reply.... bye tc
Hope u will help me... Thank You
BrainWashed said:
I replaced my touchscreen (without LCD) by myself. It is not very hard. You have to solder 4 small cables. If you can handle the tiny screws and aren't afraid soldering 4 cables onto a 7 mm flatband cable. No Problem.
It is a little bit tricky to open the device because of the slider. The two cables of the slider are just plugged in onto the mainboard, so you can just pull them out with a screwdriver.
Click to expand...
Click to collapse
can you tell me where you bought your touch screen?
BrainWashed said:
I replaced my touchscreen (without LCD) by myself. It is not very hard. You have to solder 4 small cables. If you can handle the tiny screws and aren't afraid soldering 4 cables onto a 7 mm flatband cable. No Problem.
It is a little bit tricky to open the device because of the slider. The two cables of the slider are just plugged in onto the mainboard, so you can just pull them out with a screwdriver.
Click to expand...
Click to collapse
Can you give some hints on how you disassembled the display.

Replacing housing

I'm thinking of replacing the housing on my SPVM2000...found a guy selling housings on ebay and just wanted to know if any1 here found any links on disasembling the blueangel? TIA
Hi There,
I have disassembled many devices over the years, and no matter how delicate you are with them, always keep in mind that most of them were never designed to take the stresses and strains of being dismantled.
Chances are too that you might nick a ribbon cable or worse, the board and turn your device into a pretty looking paper weight.
I live by the rule of "if its not broke, dont fix it."
If you do happen to go ahead with it then I wish you the very best of luck!
Whiterat said:
always keep in mind that most of them were never designed to take the stresses and strains of being dismantled
Click to expand...
Click to collapse
i live by the rule: "if it has screws - unscrew it and dismantle!"
almost every electronic device can be dismantled easliy... im not pro-uber-electronic but ive dismantled many electronic devices of all kind, including every phone/pocketpc that i ever had and i never had any problems with putting them back alive... just remember to be careful with mainboard, extremally careful with display and treat well the display cable/tape
ouch... and try not to damage the guarantee sticker... or get one on ebay
white screen
hi,
i tried opening my Pda2k as it was having a sound of a broken peice inside after a free fall to the ground, well, i got the tiny broken peice out, but now i have a white screen with no display, it seems the the pda is working well but there is no display,
i tried several times to plug the Screen plug into its socket but no way, sometimes it gets display but for a second then vanish .
any help from those who have done this several times ??

[Q] LCD Replacement???

Hi guys, I got my hands on a MT4G with a broken LCD.
First Q, is it worthy getting a replacement off cheapbay? What other options are there?
Second Q, is it hard to replace it? Is it possible to do it myself?
Thanks for your advise...
I haven't replaced an LCD myself but I am looking to replace a digitizer for my wife's phone.
Someone posted up this link for me in another thread I started.
http://www.ebay.com/itm/FULL-LCD-DI...984?pt=LH_DefaultDomain_0&hash=item2a12834fe0
This should take out the hard part of disassembling the digitizer from the lcd and reattaching and the adhesive itself.
It's the complete the front housing, digitizer AND LCD in one. Already assembled.
I haven't ordered it myself yet but I AM tempted. Especially after watching some of these disassembling videos.
Let me know what you decide and how it worked out.
Just PM me.
Thanks bro and good luck.
Thanks a lot, I will check it out, the adhesive part really has me in doubt.
I've replaced the LCD without the digitizer attached and you are both correct. It can be done but the finished product is not factory quality. I looked at the ebay part posted in the link and that would be the way to do it. Otherwise you have to use a hair dryer to heat the glue and its not fun.
If you are not familiar with taking electronics apart look for a video tutorial via google; I used one to take the MT4G apart. Also label the screws as they come out by drawing the phone on a piece of paper and placing the screw accordingly on the paper. Makes assembly much easier!
Hope you take on the challenge and good luck.
allenmehrer said:
I've replaced the LCD without the digitizer attached and you are both correct. It can be done but the finished product is not factory quality. I looked at the ebay part posted in the link and that would be the way to do it. Otherwise you have to use a hair dryer to heat the glue and its not fun.
If you are not familiar with taking electronics apart look for a video tutorial via google; I used one to take the MT4G apart. Also label the screws as they come out by drawing the phone on a piece of paper and placing the screw accordingly on the paper. Makes assembly much easier!
Hope you take on the challenge and good luck.
Click to expand...
Click to collapse
Yeah my only thing about ordering this complete assembly is that my wife's phone has the SO screen and I don't want to replace with an SH, which I'm sure that part is going to be. (99.99% sure)
Add to that, she doesn't even need a new LCD and the digitizer alone is just 25 bucks.
Decisions, decisions.
nguyendqh said:
Yeah my only thing about ordering this complete assembly is that my wife's phone has the SO screen and I don't want to replace with an SH, which I'm sure that part is going to be. (99.99% sure)
Add to that, she doesn't even need a new LCD and the digitizer alone is just 25 bucks.
Decisions, decisions.
Click to expand...
Click to collapse
I have to clean the dirt out between my digitizer and lcd! Can't tell you how annoying that is. Suppose someone could do a better job resealing it... It would be nice if a digitizer/lcd kit came with new adhesive.
http://www.papadigitals.com/advance...uch+4g&sgmid=aa6a532f59b343f82afc0aaa2d55c02d
I saw lcd screen and touch screen digitizer for HTC mytouch 4G there.
I've been taking electronics apart since I was 7 tears old. The MyTouch 4g finally beat me.
There are a lot of really delicate connectors that break easily. Be careful
dr_tracker said:
is it worthy getting a replacement off cheapbay? What other options are there? Second Q, is it hard to replace
Click to expand...
Click to collapse
You'd better to buy non-working phone (maybe from ebay) and make one from two phones. You should have the screwdriver. Easy to replace.
It is not really hard i saw a vid on youtube just search it up super easy actually
I bought a digitizer LCD already together for like 75 and it wasn't too bad to exchange and put this new one in but when I powered the phone the bottom left of the screen didn't work and it impossible to take it back out of the silver bezel without breaking it so I sent it back to get my money and lost the bezel. Its not too hard but be careful take your time and don't pull or yank anything.
Sent from my SGH-T959 using xda premium
I replaced my digitizer. I agree, there are many delicate connectors, but nothing to be afraid of. You should watch the YouTube video over and over. Also, be careful not to push on the bottom buttons while taking it apart. This was the most frustrating thing because they wouldn't sit properly when reassembled. I took it apart 5 times before I forgot to detach the power ribbon and ripped it off! There are motherboards available to fix this, but saving it for another day.
Sent from my HTC Glacier using Tapatalk
That's funny that's the same exact thing I did pulled the power ribbon right out so I just said screw it and just bought a new phone on eBay
Sent from my SGH-T959 using xda premium

Another Cracked Screen

Joined the club this morning unfortunately. My touch screen still works, so like many, I just have to replace the front part.
I've read this thread almost in its entirety, but nobody mentions having any success. Has anybody tried replacing the screen themselves? Does anybody know if you can use a blowdryer instead of a heat gun?
Also, where are most people buying replacements? I see the one from China, but I'm a little wary of those so considering this: forum.xda-developers.com/showthread.php?t=2617614
I've replaced laptop and mobile screens in the past (back in the HTC 8525 days), but not sure if this is out of skill-set. Would really appreciate some input.
scopefield said:
Joined the club this morning unfortunately. My touch screen still works, so like many, I just have to replace the front part.
I've read this thread almost in its entirety, but nobody mentions having any success. Has anybody tried replacing the screen themselves? Does anybody know if you can use a blowdryer instead of a heat gun?
Also, where are most people buying replacements? I see the one from China, but I'm a little wary of those so considering this: forum.xda-developers.com/showthread.php?t=2617614
I've replaced laptop and mobile screens in the past (back in the HTC 8525 days), but not sure if this is out of skill-set. Would really appreciate some input.
Click to expand...
Click to collapse
There is a video guide on youtube on disassembling the tablet and replacing the front panel. Its by LE55ONS I think is the uploader .Check it out.
filchi756 said:
There is a video guide on youtube on disassembling the tablet and replacing the front panel. Its by LE55ONS I think is the uploader .Check it out.
Click to expand...
Click to collapse
His seems to be for the regular 10.1, not 2014. Same process?
Edit: Realized I foolishly posted in the wrong board. Reported the post.
scopefield said:
His seems to be for the regular 10.1, not 2014. Same process?
Edit: Realized I foolishly posted in the wrong board. Reported the post.
Click to expand...
Click to collapse
I recommend you should not try to do this yourself but instead send it to a prof.service. you could find them on Ebay. You should only do it yourself if you replace the whole screen assembly.
buhohitr said:
I recommend you should not try to do this yourself but instead send it to a prof.service. you could find them on Ebay. You should only do it yourself if you replace the whole screen assembly.
Click to expand...
Click to collapse
How hard is it? I bought the screen for 40 on eBay (US) and am close to buying the materials (heat gun, replacement kits, pry, etc.) I've seen some tutorials on YouTube and just seems to take some patience and perseverance?
scopefield said:
How hard is it? I bought the screen for 40 on eBay (US) and am close to buying the materials (heat gun, replacement kits, pry, etc.) I've seen some tutorials on YouTube and just seems to take some patience and perseverance?
Click to expand...
Click to collapse
Someone did replaced the digitizer and the screen didnt worked. So good luck.
I also did cracked mine screen, but I took it to service repair and costed me 285US.
Only positive, is the new replacement screen doesnt have backlight bleeding like mine old one had and was very annoying as hell.
This is first ever big LCD screen that doesnt have any backlight bleeding of all i owned.
dt33 said:
Someone did replaced the digitizer and the screen didnt worked. So good luck.
I also did cracked mine screen, but I took it to service repair and costed me 285US.
Only positive, is the new replacement screen doesnt have backlight bleeding like mine old one had and was very annoying as hell.
This is first ever big LCD screen that doesnt have any backlight bleeding of all i owned.
Click to expand...
Click to collapse
That's way out of my range unfortunately. What are these repair people doing that we can't do?
Any other last thoughts? Should be getting my replacement screen this week.
scopefield said:
Any other last thoughts? Should be getting my replacement screen this week.
Click to expand...
Click to collapse
If you don't know I tell you, the screen is glued to the digitizer with UV glue and you need a special glue machine to do that. Any other methods like tape, glue strings, glue kits ...what ever, will not work the same way, air and dirt will get in between and you will see mark and bubble all over the screen in the long run, plus the touch/Spen may not even work right any more...So good luck. It's may cost you more but, if you went through all the headache and at the end you still have to buy an assembly...mute point and even cost you more...
scopefield said:
That's way out of my range unfortunately. What are these repair people doing that we can't do?
Click to expand...
Click to collapse
They dont change the digitizer only and whole LCD+digitizer frame. None of repair service would change just the digitizer, too much work and very difficult to do it.
Repair cost only 50US and lcd+digitizer frame cost 235US. Looking around the web, its cost around 210SUS LCD + digitizer frame.
After I read that someone failed to replace only the digitizer, since they are glued together and decided take it to repair service instead.

Categories

Resources