PLEASE HELP, my universal can't boot, - JASJAR, XDA Exec, MDA Pro Software Upgrading

i've tried to upgrade my universal with darkforce dutch wm6. but it failed. since then my universal can't boot anymore. the onlything that's working is hard reset: softkeys & reset. then when i press 0 or x the universal shuts down again, with no possibility to boot, only the hard reset. hopefully somebody can help me.
Jr.

put it in boot loader and reflash again. read wiki!!!!!

as bulldog has said you need to put the phone into bootloader mode and reflash it, then it should work fine - keep us updated though

Related

Dumb rom in bootloader mode, or get filesystem in bootloader mode?

Hi @l..
sorry if i have a double post
but, it think, it´s better in this level ;-)
I have B&B4.0 on my P3300. I have the problem, that it stuck on the second bootscreen. First time it happed, i resetet about 3 times, and then it works again.
Now my battery was out of power, so my Artems goes off.
Now i started it an it hang.. ok.. i thought thats normal.. but i did since yesterday about 40 soft resets!! And it ever stuck on Bootscreen.
But i don´t want to do a hard reset, because i need some files of the filesystem.
SO MY QUESTION:
is there any way to dump the rom from bootloader mode, or is there any way to get active sync running in bootloader mode, so i can go to the filesystem???
i need help
PLEASE!
thanxx 2 @ll

Imate- Jasjam

After installing randomize_wm6_1_storm_v2_10_rom_wwe, it got hanged. It is not booting. What to do? Is there any software to solve this problem?
Please help.
Dharmesh Shah
1st do a hard reset. hold down both softkeys and hit reset button. This will set it back to "factory" (this means it should boot up like the 1st time it was started BUT it will have the last os you flashed - randomize_wm6_1_storm_v2_10_rom_wwe). see if that works, Otherwise reflash by going into boot loader and connecting to usb, run the RUUWrapper.exe of the os you want and let it upgrade. cheers.

P525 - Upgraded to WM6.1 and BRICKED?!

Dear all,
I need help in repairing my Asus p525. I was trying to flash it to WM 6.1, but suddenly update failed. After that i started getting asus Blue Screen, and nothing more. I cannot hard reset, neither turn on the PDA. When I take out the battery, I can, by pressing CAM REC JOY and SOFT RESET button to get to USB loader.
I used USB loader and reinstalled my ROM and Boot Loader to Official Release of Asus. But this didnt help and I still get only Blue Screen, and after that nothing - unless I take out my battery for a while and return it.
Can anyone help me with this problem ?!
Greetings
New thing
Last night I took my battery out of the phone. Today I dont even have ASUS BLue Screen, but still i can, while holding the buttons, on reset (inserting the battery) to go into FORCE MODE.
Anyone know what to do ??
Today I reflashed with new roms, but it just dont work.
Greetings
I realised now, that when I charge the battery FULL, the phone starts working ?! First i have problem to calibrate the screen, and later on the OS start to work, and everything seems fine ?! But it resets, block..... hardware thing ?

Diamond stuck at configuring screen after Rom upgrade

Dear all,
Desperately need help and deeply appreciate if anyone could shed some light.
I recently upgrade my rom. The rom upgrade without problem, after I installed couple of applications, the phone was hang after restart.
I tried re-flashing the rom couple times and it seems everytime restart, the rom will hang.
After several re-flashing, my phone now stuck at the screen where, it stated, system is being configure and stuck on this screen forever.
I tried reset the rom by Vol-down & back key as well as vol-down & center key, Rom upgrade completed successfully but upon phone restart, my phone keep stuck at the same screen.
I do noticed that, by resetting the phone into bootloader mode (reset with Vol-Down, back key) with USB cable attached to my phone, the bootloader detected USB connection but time out.
Is there any software which I should install on my laptop which allow me to transfer another diamimg.nbh to this phone?
Thank you
decent_devil said:
Dear all,
Desperately need help and deeply appreciate if anyone could shed some light.
I recently upgrade my rom. The rom upgrade without problem, after I installed couple of applications, the phone was hang after restart.
I tried re-flashing the rom couple times and it seems everytime restart, the rom will hang.
After several re-flashing, my phone now stuck at the screen where, it stated, system is being configure and stuck on this screen forever.
I tried reset the rom by Vol-down & back key as well as vol-down & center key, Rom upgrade completed successfully but upon phone restart, my phone keep stuck at the same screen.
I do noticed that, by resetting the phone into bootloader mode (reset with Vol-Down, back key) with USB cable attached to my phone, the bootloader detected USB connection but time out.
Is there any software which I should install on my laptop which allow me to transfer another diamimg.nbh to this phone?
Thank you
Click to expand...
Click to collapse
you should try mtty...it formats your phone and solves all the problem like the yours..a guide to use it is in a sticky thread
or you can try downloading any rom and usually the chef includes a file called customRUU.exe..put your phone in bootloader mode then flash trough customRUU.exe
HELICOPTER88 said:
you should try mtty...it formats your phone and solves all the problem like the yours..a guide to use it is in a sticky thread
or you can try downloading any rom and usually the chef includes a file called customRUU.exe..put your phone in bootloader mode then flash trough customRUU.exe
Click to expand...
Click to collapse
Thanks, Managed to extract one Rom and restore my phone via customRUU.exe.

[Q] Cavalier got stuck

hey, i have been using htc s630 from last year.
few days later when i was making a call, the phone got stuck and hang in the incall position, when i removed battery and restarted it again, the phone got stuck welcome screen.
i have done the steps to flash it from pc but it doesn't work,
please help me ot to get my phone back..
umer92 said:
hey, i have been using htc s630 from last year.
few days later when i was making a call, the phone got stuck and hang in the incall position, when i removed battery and restarted it again, the phone got stuck welcome screen.
i have done the steps to flash it from pc but it doesn't work,
please help me ot to get my phone back..
Click to expand...
Click to collapse
use the method MTTY to fix it, after that reflas with official rom
hey, i have tried every thing for couple of weeks, but its not working for me, as when my cell phone restarts it stucks on the welcome screen, is there any way to delelete the operating system and install it again?
Sequence for recovery is (don't execute the next step if one gets your device back to life):
Soft Reset (Reboot) - this did not help obviously as you wrote.
Hard-Reset - mind that first boot will take much longer than usual, some minutes (up to 10 - depending on the device) will pass until the device is ready again. This is because all operator and init-specific things must be executed on the device with first boot. Be patient and do not interrupt - it must finish by itself. -You may just be stuck here!
Re-Flash the right shipped ROM - mind that the device can only receive the CID matching original ROM, not just any ROM (yet). You must do that while the device is waiting in bootloader mode, otherwise the RUU may not be able to access the device.
Gold-Card Flash a close-matching ROM (so one with same languages and the right device).
Please describe in detail what you did already and what were the results of your actions.
hey thankz, but i tried everything, all the steps you written above i them them all, nothing happened,, please help me,, my fon is stuck for couple of months.. it just shows the welcome screen, nothing else.. is there is a way that i can flash the operating system and reinstall it??
waiting..
bring the device to go into bootloader mode by Hold the camera button on the right side, press the power button. The phone will enter the " bootloader " mode and you 'll see the tricolor boot screen. after that reflash the device with shipped rom can you get at ftp://xda:[email protected]/Uploads/Smartphone/Cavalier/Shipped_Complete_Updates/Dopod/

Categories

Resources