Related
Hello and good day to you all.
I have a bit of a problem and i was wondering is someone could help.
Recently flashed my phone using schaaps 3.54 also did the hard spl now says
ipl 1.04
spl 2.10.olipro
Very happy with the outcome but the camera stopped working (Twice this has happened now on second phone), so i need to send the phone back to orange. Everytime i try to go back to the orginal rom (downloaded from the orange website), the phone goes into bootloader and then then nothing PC says it has lost connection with the phone.
Guess what im asking is how do i put the original rom back on, or cant I. have searched the forum but either im blind or i didnt use the correct search words. Any help would be very greatly recieved.
Thank you
Andy
andyd358 said:
Hello and good day to you all.
I have a bit of a problem and i was wondering is someone could help.
Recently flashed my phone using schaaps 3.54 also did the hard spl now says
ipl 1.04
spl 2.10.olipro
Very happy with the outcome but the camera stopped working (Twice this has happened now on second phone), so i need to send the phone back to orange. Everytime i try to go back to the orginal rom (downloaded from the orange website), the phone goes into bootloader and then then nothing PC says it has lost connection with the phone.
Guess what im asking is how do i put the original rom back on, or cant I. have searched the forum but either im blind or i didnt use the correct search words. Any help would be very greatly recieved.
Thank you
Andy
Click to expand...
Click to collapse
www.mrvanx.org - you'll be wanting gthe WM5 downgrade guide.
Forgive me for being stupid but when it says i need a rom does this have to be the original one that i use with it
how do i find the nbh file the rom i have downloaded is an exe file
lol ignore last post just worked that out right click the exe file and extract lol
Thanks for the link got it sorted now and have learnt something this afternoon. cheers
Rang orange told them camera is black and they are replacing phone tomrrow morning
did yhou downgrade the hard spl too?
lol dont ask me complicated questions lol how do i do that?
im currently updating it from the orange website with there update hopefully that will do it?
Hi guys. I have installed loads of ROMs onto my trusty hermes yet today, when trying to flash DuttyThroys Ultra Ultra Lite rom this happened: i downloaded ROM and installed it, it seemed to install fine, got to 100% and then came up with error message stating that Image File was corrupt. Now my hermes is stuck on the multicoloured bootloader screen?!?!?!? I have SPL 2.10. Hard SPL V7 HERM 100 IPL 1.04 (Dont know which of these is relevant to anythin?) .I have read the WIKI on repairing bricks but for my problem it says to reflash any nbh without radio. How is this possible if i cant get my pc to connect to my hermes???
Tried the method of turning off usb connection in active sync, removing battery, reconnecting to usb and running mitty (command SET 14 0) but nothing happens. Mitty says CMD error and active sync doesnt reopen the connection like the guide says! Man i hate this cuz i have now become one of those annoying noobs who has bricked their phone and hassles everyone for help!!!!
Have also tried to flash from sd card but nothing happens, flicks to white screen with LOADING... on it for 2 secons then flicks back to that wonderful multicoloured screen of joy!
Any help will be appreciated guys, cant live without my hermes!!!
Welcome to the fuc... nightmare world of the brick,i'mma in your same situation,now my Tytn is a piece of white stone,and it seems there's no reason to bring it back to live!
I can't stay without my Tytn i do a lot of things with it,Skype,SIP calls,Mail,Messenger,Memo,Internet......i'm in totally despair!!!
you should be able to just reflash a known good rom.
hfam95 said:
you should be able to just reflash a known good rom.
Click to expand...
Click to collapse
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??
IT could be interesting to make the minimal effort to go and read the wiki.
anyway:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Better than just cry.
MarcWhittle said:
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??
Click to expand...
Click to collapse
With the microsd card...
right, its looking good. managed to begin flashing (bar has stopped for ages but having read this is normal im not so scared!) using the SD method. Where my device wasnt superCID i had to use the matching ROM (Orange) to my CID (which incidently i dont know, just downloaded both Orange ROMs).
While im waiting ill try and help you TETSUO! (Im a noob so probably cant!)
Is your device SuperCID??? tell me as much as you can about your device SPL etc
dude, if u read my post u would have seen that i have tried SD method once (sing Black 3.5 not ORANGE ROM), im not crying and im grateful for any help but when i get advice such as 'flash a rom' im gonna be pissed!
And i have read ALL the page on unbricking!!!
It worked!!
One more question, as i have installed a stock Orange ROM do i now need to reinstall HardSPL v7??
Are you on a Win XP or a Vista PC?
XP dude, sorry should have said! and thanks
i went into bootloader, still says 2.10 olipro but when i try to update to new ROM (Black X RC)and pick autodetect it says it says unknown version, use SSPL. it never used to say this so i assume i need to install HardSPL 7 again???
with the tri colour sceen, when you plug the usb cable in does it go from serial to USB ?
what OS have you got ?
just my 2 cents hope it helps.
dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!
sorry slooooooooooooooooow typing
good question hope there an answer,
MarcWhittle said:
dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!
Click to expand...
Click to collapse
just saw your post if ur device is hardspl you just need to supercid your device, If your spl is still showing hardspl and its coming as a error that normally happens to me as well just manually click spl 2.10 and tick (is it hardspl?}
To recap, i have now managed to flash a stock Orange ROM from SD card ( i think the reason it didnt work first time with SD is because device isnt SuperCID and i was trying to flash Black RC, soon as i used Orange ROM (my device is M3100) it worked. I am now back to a fully operational device. I wish to go back to Black but when i AutoDetect what bootloader i have it recommeds SSPL method. Before all my problems it would always automatically pick 2.10?? Does this mean i need to install HardSPL v7 again??
it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli
MarcWhittle said:
it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli
Click to expand...
Click to collapse
If you only flash the orange os.nb only then your hardspl wouldnt have changed so its safe to flash your device just manually choose.
If you want to flash hardspl again then do it on a precaution method
Mark,
First of all well done for getting yourself out of a hole. It seems quite difficult to ask for help these days without being shot to pieces even when you have first tried to help yourself by doing all the right things, which is more than can be said for some who come on here asking for help. So well done again.
Re your question, I would reflash Hard SPL anyway to be sure; however before you do that go to the Mr Vanx's guide on hard SPL (forgot the link but type in www.mrvanx.org and you should be taken there) and follow his instructions.
Good luck.
WB
Hi.
I recently flash my 8525 to WM6 version 19174.1.0.0
Now no matter what I do, I tried to flash any other rom, it will
flash, but still came back to the same rom.
Can anyone have any suggestion?
Using IPL-1.04, SPL-2.10.Olipro.
During RUUwrapper, the "From" image, and "to" image always listing the same,
no matter what I do.
thanks.
Thanks for reading.
I please the ruu_Signed and Ruuwrapper into a new directory and now everything works.
download the HTC WWE Rom from the WIKI, flash your device, hardSPL it again then off you go with your next ROM...
lemme try and guess what went wrong here........you had both the old nbh file and the new nbh file in the same directory, and each time you were flashing the old rom onto the phone
sounds about right. Always read through upgrade guide and wiki pages if your a noob before you do anything
Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
I suggest your search the forum...
hello newbie
yes use the search button...it works really well
You first need to flash your diamond with one of the hard spl on this site and after you've done that you can take your pick from any of the roms on here
sorry guys i did look just didnt understand much. I am trying to use Hard SPL just cant get it to work.
same here
I have an orange htc Diamond and would really apreciate which files wouldwork. Everything I have tried stay's at Zero and ends up in an error.
Any help would be greatly ppreciated
root directory
to use hard spl i have to put a file in the root directory! but what is the root directory?
Hi James, your failing at 0% most likely because the SPL your using will not allow unsigned ROM's. Look for another SPL, one with developer edition in the title is good and works quite well for me.
I have an Orange also, the first thing to do is install the SPL then flash the radio (.05 is good) then get a new ROM!
Hope this helps
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
james soules said:
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
Click to expand...
Click to collapse
You need to do the following
1. Download the Unsigned HardSPL 1.24 from here http://forum.xda-developers.com/showthread.php?t=408621 and extract to a folder on your PC. Make sure you have Active sync installed and setup with your Diamond. Run the Updater in the 1.24 folder. Once the Phone reboots reconnect with active sync.
2. Download any of the ROMS on here and run the ROM to flash the phone.
Thats it !!!!!
Topboy
as i go to add a ROM i get a error saying the application failed to initialize properly ( 0xc0000135) click OK to terminate
Or check www.modmydiamond.info for easy to understand information
i get the above error as i try to add RUU
Hard SPL won't work
Hello,
From what I've read on the forum and also on www.modmydiamond.info, I gather I need to go through the Hard SPL step before installing any ROM.
However, after trying 2 different SPLs (hard_spl.120 and diamond_hspl_1.24) it still doesn't work.
I'm stuck at 0%.
Thanks
Read here....
As an alternative to the other threads try this one:
http://forum.xda-developers.com/showthread.php?t=416211
Its about the most comprehensive writeup I've seen to quickly and easily get your Diamond set from HardSPL to Radios to ROM's
Also read the WiKi's section at the top of the forum......
Query on Orange htc Upgrade ROM.
Hi There,
I have recently purchased a htc diamond, it was originally an Orange unit but is unblocked.The ROM version is 1.37 but I wish to flash to 1.93.I have the Orange released version of the 1.93 as htc wont support me direct.Question is, if I do this will the unit revert back to being Orange??ie.....does this flash the radio back?? or will it remained unblocked??
Thanks in advance...
james soules said:
Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
Click to expand...
Click to collapse
thxthxthxthx
Hi Guys I need your help.
I have a tilt 2 that I hard SPLed and installed Energy Titanium.
I wanted to put the original Stock att rom back in it since most of the roms I've put into it is still under development and missing a lot of stuff.
So i dled "Stock_SPL_Restore_087.zip".
I Task29 it first.
Then I got customRUU.exe with the RUU_Signed.nbh (from the Stock_SPL_Restore_087.zip) and put it into a folder. Then ran customRUU.exe from the bootloader.
Now on the bootloader screen I see SPL-0.87.0000
When I let it boot It just goes to a white screen with " ATT and World Phone" on it, and after a few seconds it reboots by itself again.
So my questions are:
Can I reflash HardSPL from the bootloader?
Can I still load a stock or any other rom to it?
Is this what it means to be bricked?
How to fix this issue?
I did read the FAQs
And yes I do get the 260 error.
Thank you for all your help!
Wow noone knows? : (
Can anyone help?
You should have flashed the stock ROM BEFORE the SPL. You could try extracting the NBH from the stock ROM and flashing that from the bootloader. I'm not guaranteeing anything, though. You should have followed the directions.