Yesterday I installed the following .cab on my wizard:
http://www.pocketpcfreewares.com/en/index.php?soft=1137
When I finished the insallation my qtek was freezed. And it did not function any more....
I really want to do a hard reset but my phone can't connect to active sync anymore....
Does anyone have a solution for this problem???
Thank you in advance.....
If the device wont boot any more, the only thing you can really do is a full reset.
I assume you've already tried a reset?
That is the problem.... my device cant connect to active sync aymore... and I dont know another way to do a full reset...
You should have the clearstorage program on your phone. Run that, and it'll hard reset you. There's a button combination as well to do the same, but I don't have a wizard to tell you it. Check the wiki or use search.
V
- Switch off your device
- Press and hold the Comm Manager and Voice Dial button
- Switch on your device (while holding those 2 buttons)
- Press the Send (green button) key to give it a hard-reset.
Good luck.
have downloaded update rom v 1.40 form the imate site. and connected my device to my PC via bluetooth link and sync through active sync4.5 and then run the update setup setup found the device v 1.22 and ready to update it to v1.4. and then after the restart (which the setup automaticlly does) a display with out back light appers which says (Serial v2.07). i tried to soft reset and hard reset but nothing happens, on the short i am unable to load os on my device and stucked to this display (Serial v2.07). i do not have data cable or cradel. any solution Please.
1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
I have an imate pocket pc phone edition I have some how wiped out the rom and when i try to install another one i ge error 101 connection error I have tried another rom downloads but get the same result. the rom im trying to install is the RUU172126WWE_imate.exe. The only screen I have up on the imate at the moment is USB v1.06
Can anyone please tell me what im doing wrong and how to fix this problem.
Very stressed out
Remove the handset from the cradle and put it again..after u remove u shd see serial instread of USB..if u see this then yr phone is Good alive..else press Power+Action+reset to get into bootloader mode again and cradle yr device..RUN the proper ROM update..
For more details visit wiki
1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
gun said:
1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
Click to expand...
Click to collapse
Hi,
Is your solution apply on JAMin mobile, also can you guide me how to download the Romupdate file?
Thank you,
Celetask is supercool task manager:
Include New Task, Close task, Switch Task and View Task Properties.
Start any application through command line.
CeleTask can also execute any menu command in command line.
Include Terminate Process, View Process Modules, Properties.
Tool box with full customization support. Include Power Status, Memory Status, Free Memory, Reboot System, Shutdown System, etc.
Hot Key Customization
User can assign a hot key for any command.
All this with one press the Internet button
I use Internet button to start the Celetask and I set the hotkey of Celetask to shutdown all apps with another press of Internet button. I use "8 button" to clean the ram. And that how with 3 clicks I close all aps and clean the memory
The "1" button I use for soft restart.
To use this task manager with hotkey just download the attachment end copy two files in WINDOWS folder.
I see this in Kavana new 6.1 ROM, but you can use it in all other ROMS.
littleclown said:
Celetask is supercool task manager:
Include New Task, Close task, Switch Task and View Task Properties.
Start any application through command line.
CeleTask can also execute any menu command in command line.
Include Terminate Process, View Process Modules, Properties.
Tool box with full customization support. Include Power Status, Memory Status, Free Memory, Reboot System, Shutdown System, etc.
Hot Key Customization
User can assign a hot key for any command.
All this with one press the Internet button
I use Internet button to start the Celetask and I set the hotkey of Celetask to shutdown all apps with another press of Internet button. I use "8 button" to clean the ram. And that how with 3 clicks I close all aps and clean the memory
The "1" button I use for soft restart.
To use this task manager with hotkey just download the attachment end copy two files in WINDOWS folder.
I see this in Kavana new 6.1 ROM, but you can use it in all other ROMS.
Click to expand...
Click to collapse
This is the newest version of celetask,Yonsm(the author of celetask) build it for me,and it's include Excalibur's HotKey name,the best taskmanager for Excalibur
The original one is chinese Interface,i made it to english interface as the default interface.
Enjoy it.
This is version 2.0 I think. Version 2.2 is free only in Chinese (not problem for you anyway ).
Can you attach the latest version in English here please.
littleclown said:
Can you attach the latest version in English here please.
Click to expand...
Click to collapse
The real version of CeleTask i put in my ROM is 2.2.2504.5122
this is the newest version in the world
I have translate it into English Interface, you can use it as english version just with out the chinese mui.
Enjoy it !It's the real newest version,and it's real english version
Yes but I flash the HTC WM6 and I am so lazy to flash your ROM just to get the exe . Thats why I asking you this .
littleclown said:
Yes but I flash the HTC WM6 and I am so lazy to flash your ROM just to get the exe . Thats why I asking you this .
Click to expand...
Click to collapse
No problem, and you can try CeleCmd,it's also a good software,it help me do everything (install cab,create shortcut,input reg,and so on)after cold boot,my rom is also base on CeleCmd
I try it, but nowhere i can find documentation in English .
Can you attach the CeleTask last version in English now?
this is a great proggie. i've used it to create a shortcut to soft reset. the only problem is that it asks me to confirm i want to restart the phone. there's probably a way to bypass this, but i've not figured it out.
anyone know if there's a way to use celetask to restart the phone without a confirmation message?
Yes:
Menu-->Options-->Show Alert
Just remove the check and Celetask will make everything without questions.
Now I have a question:
how to make a hotkey with Celetask to start anoother program.
I see I can add programs to tools but can connect hotkey to them
i have the opposite question littleclown...
for some reason activesync is in my celetask and i don't want it there. there's no reason for it to start at startup. at least i don't think it's necessary anyway. it fires up just fine on it's own when i plug it into the computer.
i can't seem to get it removed from the program list in celetask.
can anyone fill me in on the trick?
Fake server for Activesync
The following info comes from Aximsite
1. open the Activesync program.
2. Select Menu at the bottom right hand corner of the screen. This will bring up the Options Menu. Notice the option Schedule... is greyed out? This is the all-critical option we need to get access to. But as it's disabled we can't change Activesync's default synchronisation schedule.
Ok, so how do we enable the Schedule option? Easy!!! Fool Activesync into thinking there is an Exchange Server to sync with:
1. From Activesync's Menu select Add Server Source.
2. In the following screens you can enter any old garbage. It does not matter, but just in case your unsure, just type the following in the indicated boxes:
Server Address: fake
Tap Next
User name: fake
Password: fake
Domain: fake
(Select save password or going into the Advanced menu makes no difference, so no need to bother).
Next
Untick all of the 'Data you want to synchronise' options
Tap Finish
3. Ok, we're done creating the server. You should now see in Activesync's main screen your normal Activesync connection(s), and a new connection called Exchange Server.
4. Go back into the Menu, and lo and behold the Schedule option is now enabled! Go ahead and tap it!
5. You will see that both options in the Schedule screen are set to Every X Minutes.
6. Using the drop downs, change both the Peak times and Off-peak times boxes to Manually.
7. Press the OK button.
Now
1. Go back into Activesync's Menu, then Tap Options.
2. Highlight Exchange Server, then tap Delete. A warning message will appear about removing files etc, but as you have no files associated with the fake Exchange Server, it's nothing to worry about - just tap Ok.
3. The list will now only show your remaining PC Sync connection(s).
I did and Activesync stop starting automatically, however after you connect with your PC you need to close Activesync with Celetask
thanks!
unfortunately it didn't work.
i'm trying something else. will report back.
Need a clean i637 WM 6.1 or WM 6.5 Rom
Because my phone is OS killed. (device has a lot of errors )
I can't find any ROM in the web.
Help me !
Thanks in advance
Have you use the hard reset or Master clean?
crt60 said:
To reset the handset’s factory settings, via buttons, follow the steps below:
WARNING: This Reset will Delete ALL added Data from the Handsets Memory
When the handset is powered off, Press and Hold the 5 key then power on the handset
Press either the 1 key (Master Clear) or 2 key (Master Reset) at the Format Menu screen then press the Y key (Yes) at the confirmation prompt
ADMIN settings-
You do not have to unlock security on the phone to be able to do this...
1) From the home screen type in *#1546792*#
2) pick 3 for network and call settings
3) Set network order to Auto, and network mode to auto
Click to expand...
Click to collapse
copyed from other......dont know can help you or not....
Will, I just try these on my i637, It works......I don't know how about yours...