Develop Bugs

Help me please

I have an imate pocket pc phone edition I have some how wiped out the rom and when i try to install another one i ge error 101 connection error I have tried another rom downloads but get the same result. the rom im trying to install is the RUU172126WWE_imate.exe. The only screen I have up on the imate at the moment is USB v1.06
Can anyone please tell me what im doing wrong and how to fix this problem.
Very stressed out

Remove the handset from the cradle and put it again..after u remove u shd see serial instread of USB..if u see this then yr phone is Good alive..else press Power+Action+reset to get into bootloader mode again and cradle yr device..RUN the proper ROM update..
For more details visit wiki

1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.

gun said:
1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
Click to expand...
Click to collapse
Hi,
Is your solution apply on JAMin mobile, also can you guide me how to download the Romupdate file?
Thank you,

080312

just installed, did a restart and comes up with the following errors on startup:
1. appman.exe - cannot execute tskschedule.exe
2. Notification error - cannot execute repllog.exe
3. notification error - cannot execute connmgr.exe
afterwards, i cannot click on the settings or advanced tabs on any of my connection settings (mms, sms, etc)
I have not installed any other programs other than just flashed the new rom from 080312

now it's not allowing me to go into the start menu, when i hit the button it says appman.exe is not a valid windows ce application, try to reboot and when i push the power button it says quickapp.exe is not a valid windows ce application

something went wrong during your install then, I would re-download the ROM files(seeing as thats prolly why, corrupted ROM files) and try again.

Mail button doesn't work! HELP

My 4 button above green button and red button (including message button) isn't working and i need to format storge and clean Hive...
thank you

it's ur help
first u search mtty 1.42 in this site and extract your pc.
connect ur blue angel.
Now you must kill wcescomm and rapimgr in ur task manager on pc.
now you must open your ppc in bootloader mode.
Now open mtty 1.42. Select connection usb. if you don't kill upstairs you cannot usb selection. select ok.
press enter. write set 14 0. then task 28. Finally task 0.
You can close the program and make soft reset.

thanks for the answer

SOLVED how to unbrck sprint diamond after bad flash

ruu
3.27.4.3
error 262
might be net framework 3.5
cf 3.5
this website had the answer
http://forum.ppcgeeks.com/showthread.php?p=47728
8
1. Stop ActiveSync, by Task Manager (press Ctrl
+ Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if
it doesn't show then you didn't stop all active
sync processes above!)
choose usb connection option
choose rts
password BsaD5SeoA
4. type "set 16 0" without the quotes to tell
bootloader to boot the OS after reset. (for some
devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and
manually reset it if it does not do that
already.

[GUIDE] how to loginin windows without password in windows 8 customer preview

just press windos+r this is a comand to execute run and write this :
netplwiz and enter ,
a windows appears , uncheck where it says user must enter a name and password and press applay and an other windows appears just put your password and confirm and press ok and thats all

Thanks a Lot