USB Problem - P3300, MDA Compact III General

Hi, I have the HTC Touch installed on my Orbit, I have just gone to connect it to my PC but it isn't even charging it never mind connecting to active sync.
I have tried it on my other PC with another USB cable too and that didn't work either. so it's not the computers.
It will charge fine with a mains charger, is this likely to be a software error on the XDA or is my usb slot dodgy, any ideas anyone???

Try a different USB lead as that could be the problem (I bet you used the same lead on both PC's) - OOPs re- read the post and you tried another lead!! - hard reset might be the next call then if you really want to wipe the device - Mike

Thanks for the help, After 4 soft resets it decided to work, Strange. I upgraded to armetis touch 4.01 from 3.01 and it seems a lot slower and buggy. Think im gonna go back.

mikehulme1983 said:
Thanks for the help, After 4 soft resets it decided to work, Strange. I upgraded to armetis touch 4.01 from 3.01 and it seems a lot slower and buggy. Think im gonna go back.
Click to expand...
Click to collapse
Strange, mine works fine, try to re-flash it.

mikehulme1983 said:
Thanks for the help, After 4 soft resets it decided to work, Strange. I upgraded to armetis touch 4.01 from 3.01 and it seems a lot slower and buggy. Think im gonna go back.
Click to expand...
Click to collapse
Was it the Vanilla/Generic 4.01 - the blue one NOT the green one - by chance?
I had the same problem and noticed that ActiveSync on the phone (the application with the green circle icon) would not run. Pressed the link on the menu and nothing opened on the phone. You should get a screen telling you to make a connection etc. I flashed it four times, all to no avail.
I downloaded the same ROM, but the GREEN version and it worked! Go figure.
If you are in the mood to try again, I recommend the Artemis Touch 4.01 WM6.1 WWE ROM - Lite without cube. It works really well, and even though it's got some of the HTC Touch apps in it, it has a lot of room left to run programs. More than I had when I loaded the Vanilla version and then installed the same HTC add-ons. I'm running SPB Pocket Plus 4 on my homescreen (I understand it to be a memory hog) and I still have 21.1 M left (after fresh boot, according to BatteryStatus). After a day of use (wifi & gprs internet (both pIE and Opera), tomtom, phone, text, email, MP3s, live radio stream, a game or two, and PIM stuff) it usually sits right around 16-18 M (using hibernate along the way, to keep it cleaned up). I'm very pleased with that as most the roms I tried seemed to suffer from memory leak. Also, battery drain isn't an issue. Overnight (10 hours of no use, but ON) I see a 2% drain. I do a lot with my phone so the rest of the day I've got it plugged in if I'm streaming or in the car etc. I can't really speak to battery drain during the day other than it hasn't been an issue for me at all. Again...very pleased.
BTW, (on my phone at least)...the Artemis Touch 4.01 WM6.1 WWE - Vanilla had no SAPsettings even though it's listed as being in there and I could not get the Artemis Touch 4.01 WM6.1 WWE ROM - Lite WITH 4 sided cube to boot. It just hung at the splash screen. The full WITH 4 sided cube has extra stuff in it I'm not interested in, so I loaded it to check it out then went back to the one I raved about above (Artemis Touch 4.01 WM6.1 WWE ROM - Lite without cube).

runningtiger said:
Was it the Vanilla/Generic 4.01 - the blue one NOT the green one - by chance?
I had the same problem and noticed that ActiveSync on the phone (the application with the green circle icon) would not run. Pressed the link on the menu and nothing opened on the phone. You should get a screen telling you to make a connection etc. I flashed it four times, all to no avail.
I downloaded the same ROM, but the GREEN version and it worked! Go figure.
If you are in the mood to try again, I recommend the Artemis Touch 4.01 WM6.1 WWE ROM - Lite without cube. It works really well, and even though it's got some of the HTC Touch apps in it, it has a lot of room left to run programs. More than I had when I loaded the Vanilla version and then installed the same HTC add-ons. I'm running SPB Pocket Plus 4 on my homescreen (I understand it to be a memory hog) and I still have 21.1 M left (after fresh boot, according to BatteryStatus). After a day of use (wifi & gprs internet (both pIE and Opera), tomtom, phone, text, email, MP3s, live radio stream, a game or two, and PIM stuff) it usually sits right around 16-18 M (using hibernate along the way, to keep it cleaned up). I'm very pleased with that as most the roms I tried seemed to suffer from memory leak. Also, battery drain isn't an issue. Overnight (10 hours of no use, but ON) I see a 2% drain. I do a lot with my phone so the rest of the day I've got it plugged in if I'm streaming or in the car etc. I can't really speak to battery drain during the day other than it hasn't been an issue for me at all. Again...very pleased.
BTW, (on my phone at least)...the Artemis Touch 4.01 WM6.1 WWE - Vanilla had no SAPsettings even though it's listed as being in there and I could not get the Artemis Touch 4.01 WM6.1 WWE ROM - Lite WITH 4 sided cube to boot. It just hung at the splash screen. The full WITH 4 sided cube has extra stuff in it I'm not interested in, so I loaded it to check it out then went back to the one I raved about above (Artemis Touch 4.01 WM6.1 WWE ROM - Lite without cube).
Click to expand...
Click to collapse
It was the 4.01 full version, even after I went back to 3.01 it still happens, the best way of doing getting it to work is to plug the usb into the phone and pc then do the soft reset that works everytime, Does anyone have a fix for this! I doubt it's the rom because it's done this on 2 different roms now.
Also when I try and charge it from the mains it doesnt aleways work and I have to soft reset?

Maybe a dodgy usb port then. My previous HTC phone with the same type of multi-use USB port got to where it would only charge from a desktop cradle...not the car, not usb, not the wall charger. I bought a cradle that charged the phone and an extra battery simultaneously. Then I'd keep the extra battery with me for 'just in case' - and of course, would charge the phone in the cradle nightly. The only way I could ActiveSync was via BlueTooth. That was my experience anyway. On a side note, the USB port on my Artemis seems much better - very smooth. It has a very positive feel when plugging in the cord. My other phone it always felt 'chunky' - for lack of a better word. Not smooth at all. So, I'm hopefull - or, at least I was until reading your post - that this one will last.

Problem with ActiveSync
I had this problem so you try to turn off your antivirus, firewall, antispam etc. and then try connect to PC.

I had this problem so you try to turn off your antivirus, firewall, antispam etc. and then try connect to PC.

Related

constant resets on O2 xda orbit

i've had my orbit for around a month and a half now, and it's brilliant other than a few problems.
firstly the only additional programs i've installed are:
SPB Diary
SPB Pocket Plus
I do have tomtom but i haven't re-installed that since my last hard reset.
so the problems are as follows:
every now and then when i try to unlock my phone, it seems to hang, with the screen staying bright but no response no matter what i try - the obvious solution is to soft reset which works 9/10 times
however, occasionally, i get a problem where the soft reset does not work correctly. The O2 screen appears (as expected) but about 1 second after the windows mobile screen appears, the screen goes completely dark and will not come on....
This has happened many times (sometimes on a daily basis) and the only solutaion i had worked out was to hard reset and take it back to factory settings - very annoying having to go through everything altering my settings so frequently following a hrd reset.
This problem also occured just a minute ago. i decided to do a hard reset and plugged the phone into my laptop so i could synchronise all my contacts back on. However i plugged it in before a hard reset was performed. Magically the screen lit back up! i was overjoyed, thinking i'd found a solution! so i unplugged it happily. thinking i wouldn't have to hard reset but the screen goes black as soon as i unplug it from the laptop...
i have since changed the brightness settings so that it's always on full brightness. this seems to have worked and avoided me the hassle of a hard reset. However i fear this is only a temporary solution
So my questions are:
is it common for the Orbit to hang regularly, causing me to perform around 1 soft reset per day??
Are the programs i have listed known to cause such problems?
Also has anyone else had such problems?
I've considered sending the phone back for an exchange for a new orbit? is this a good idea or may i expect the same with another, newer orbit (i've neverr really had a pda/phone before so i'm a little bit of a noob in this area!)
THANKS for any help, will be much appreciated!
CHEERS!
It sounds like a faulty Orbit to me. Although I did run SPB Pocket Plus on my Orbit I found it so sluggish with the Orbits slow processor that I removed it and haven't used it for months.
What happens if you:
1) Hard reset
2) Remove Active sync from your computer by the usual PC "add/remove" programs, and then go into the appropriate PC directory and manually remove what's left
3) Re-boot PC
4) Reinstall Active sync (which version are you using? I found AS 4.2 stable in a Win XP Home environment, syncing with Outlook 2002, then more latterly with Outlook 2007
5) Just synchronise your Outlook basics i.e. Contacts, Calendar, Tasks and nothing else.
6) If you use a Micro SD card install the HTC SD Card patch (see links elswhere in the forum for the patch)
If this setup is stable for a day or two, then try adding sometheng else back on, avoiding Pocket Plus for the moment.
If the basic setup is unstable, I suggest your Orbit is faulty. Mine runs quite stably, and currently running in a Vista Ultimate environment without problem.
It sounds like a faulty Orbit to me. Although I did run SPB Pocket Plus on my Orbit I found it so sluggish with the Orbits slow processor that I removed it and haven't used it for months...........
Can a Moderator please remove this duplicate, I've no idea why it happened!
i have good news (kind of)! after upping the backlight in system settings the screen does not appear to go blank anymore.
i tested this by turning the brightness down - the screen (almost) instantly went blank and would not come back on after a soft reset.. however i took it home, plugged it in (my settings are for full brightness when attatched to a power source, in the test i only changed the brightness when not connected to a power source) re-adjusted the brightness and it works fine again now - in the past, this would have called for a hard reset due to the screen refusing to come on!
I've since found another thread on the forum from another user who seemed to have the screen going blank problem, he/she also cited turning up the brightness (even though that sounds obvious!) as the solution - which is strange as the screen doesn't go dimmer as such, it goes completely black, i cannot see anything at all!
however i have had a crash still...
to answer the above, i am running:
AS 4.2, as mentioned
XP media centre edition
AMD Turion 64 X2
and i have installed the SD corruption fix , even when i first got the phone and hadn't installed it SD never corrupted though (newer build maybe??)
I don't really use outlook to sync emails anyway - the only things i sync are the basics that u mentioned (including notes as well, sorry). i don't think there is much point in doing a hard reset as i think i only cleared everything around 2/3 days ago.
i will however remove spb pocket plus for the mean while, do u think i should also remove spb diary whilst i'm at it to ensure the device is completely clean?
i would like to point out however pocket plus is not running all that slow at all... the reason i installed pocket plus was for the closing of a program when the "x" is clicked, rather than minimising them (as is standard!).
Anybody know any registry fixes for this so i need not install any additional programs to access this feature? or at a push, a smaller program that offers only a minimal set of features including this specific one?
One thing i have noticed, is that the more programs i install the more likely it is to crash, this seems trend seems to occur irregardless of which particular software i have installed (which is why, for the moment, i havent even reinstalled tomtom - i'm just leaving all the installation and maps on my SD card for when i need them!)
The problem is, as of yet, i have not worked out whether previously i had to hard reset simply because the screen didn't come and i had not resolved this issue yet, on or due to something else - however, each time i had to hard reset the screen would go dark and unresponsive! As i said though, the stalls and soft resets continue for the time being!
thanks for the continued help
D'OH!
screen just went blank, and no response from device, guess my solution of upping the brightness settings has only improved the problem, not resolved it!
ARGH!

TyTn sticks in flight mode is it a WM 6 ROM bug?

Mod, please move my message to Hermes WIN Mob 6 forum
I upgraded to WM 6 with the repackaged version of the ROM WM6 Dopod WWE 3.54.707.3 yesterday and mighty pleased with it, however I have one problem and I do not know if it is ROM related or just some setting I've screwed up in the process of changing a lot of settings.
When I turn off the phone in Comm manager and turn it on later the phone will not find the network and keeps asking for the phone pin. Entering the PIN you can see it searching on the antenna icon at top of the Today screen but then it just pops up the Phone PIN screen repeatedly.
The only way to get the phone back on is a soft reset. Pretty annoying as I turn off the phone regularly each day
Also I do not have the old flight mode/wifi balloon now when tapping on the antenna/wifi icons in main sceen, I assume this has been dropped from WM5?
Any ideas guys?
Al
moving to hermes.
Alabama978 said:
Mod, please move my message to Hermes WIN Mob 6 forum
I upgraded to WM 6 with the repackaged version of the ROM WM6 Dopod WWE 3.54.707.3 yesterday and mighty pleased with it, however I have one problem and I do not know if it is ROM related or just some setting I've screwed up in the process of changing a lot of settings.
When I turn off the phone in Comm manager and turn it on later the phone will not find the network and keeps asking for the phone pin. Entering the PIN you can see it searching on the antenna icon at top of the Today screen but then it just pops up the Phone PIN screen repeatedly.
The only way to get the phone back on is a soft reset. Pretty annoying as I turn off the phone regularly each day
Also I do not have the old flight mode/wifi balloon now when tapping on the antenna/wifi icons in main sceen, I assume this has been dropped from WM5?
Any ideas guys?
Al
Click to expand...
Click to collapse
Do a Hard Reset then test the ROM out for a few days. If you are not satisfied with it try one of the cooked WM6 versions (since they are superior).
Thanks
I will play with it as you suggest, also forgot to mention the keyboard no longer illuminates :-(
My radio too is an old version 1.03.03.10. Should I upgrade it first before flasing another ROM ( I have Hard Spl loaded OK)
After adding all my email settings for different accounts and loading apps I don't feel like a change of ROM for a few more days ;-)
Thanks,
Al
i think the problem is with your radio, try any radio at least 1.23 and above
I've been on WM6 since the second day I had my hermes, about 3-4 months ago. I've been on 4 or 5 different trips on planes requiring flight mode. Various LSVW and Sleuth ROMs used with various radios from 1.38 and on...
Not once, despite many layovers, have I had an issue with the phone not coming out of flight mode.
So, in my experiance, no, not a WM6 bug.
Alabama978 said:
Mod, please move my message to Hermes WIN Mob 6 forum
I upgraded to WM 6 with the repackaged version of the ROM WM6 Dopod WWE 3.54.707.3 yesterday and mighty pleased with it, however I have one problem and I do not know if it is ROM related or just some setting I've screwed up in the process of changing a lot of settings.
When I turn off the phone in Comm manager and turn it on later the phone will not find the network and keeps asking for the phone pin. Entering the PIN you can see it searching on the antenna icon at top of the Today screen but then it just pops up the Phone PIN screen repeatedly.
The only way to get the phone back on is a soft reset. Pretty annoying as I turn off the phone regularly each day
Also I do not have the old flight mode/wifi balloon now when tapping on the antenna/wifi icons in main sceen, I assume this has been dropped from WM5?
Any ideas guys?
Al
Click to expand...
Click to collapse
I have almost the same problem, but in my case it doesn't ask for PIN code. If I disable PIN request, everything is fine. Try to do the same and see if it's OK. This is the first ROM with this behaviour, but I can live with it in exchange of the amazing speed and phone respondivness !
I haven't seen this problem, but I do see a problem with opening a data connection after being in Flight Mode. It tries to connect to the provider 3-4 times (with quick connects), and then fails with an unable to connect message. At that point, I need to reset in order to connect to data again.
seems to be like the same problem that i am having!! i think its linked to the SOD bug, my herm100 continously reboots the 'radio' part of the phone.. when making a call the phone shows full signal however after placing the call the signal drops before connecting and it searches again for network... im sure that the phone is doing this whilst in standby mode too (maybe linking to the SOD problem) and since you've got you pin request on it seems to be cycling and asking for a pin code!! hope we can find a solution i've tried a few things but nothing seems to cure it!
Did anybody find a solution to this? My TyTn does the same

Turns off/freezes

Hi my P3300 ( artemis) has suddenly startet to freze and or turn it self off, only thing that helps is to take out and replace the battery, i have read all topics i could find with simmilar problems, and i was hopping it was my battery that was going old so i bought a new one, but it didnt help.
i have tried diffrent roms wont help,
i tried to "push" the battery closer to the conectors, no help and it's seems like its hard or software problem but not battery.
some times when i turn the device back on with out replacing battery it works but sometimes when i do like that it gets to HTC page showing rom info etc. then it fades out and i can see blackscreen but it "glows" and the phone is dead nothing works.
i chaged the screen a couple of months ago but the fault dosent seems to have with the screen to do.
It seems that it is a hardware issue. They replaced motherboard for me, it is working now.
hmmm i have no warenty left. and my phone does look used so i guess im screwd?
sorry for that..
an issue happened with me witha nokia mobile before and when i sent it to be fixed they told me there was a problem in the radio chip or something like that..
so try to install a different radio ROM ... that's all i can think of.
and sorry for your loss
i will try that, but the problem ocured before i change radio last time....
hmmm
I changed back to original HTC wm 6 (swedish) yesterday and the phone worked all day, and i thought i have solved my problem, but whilst driving my car for about 15 min and the phone was in placed in the a space in the middle of the dashboard under the stereo i found out when i toke it back up to call that it was dead......so i was wondering could it have something to do with heat or lost GSM coverage (thinking i have multiple faults on my artemis)
htc arte100 freezes on startup
can any one give solution for my arte100 it freezes on startup
how can i restore or put it on bootloader mode in order to upgrade it
thanks in advance
for the boot loader see the WIKI
if your device is unlock flash it with any rim you want.. if not get the original ROM for your mobile and then flash it..
for flashing try using RUU or the SD card flashing..
all can be found on the WIKI
totally dead
now i cant start it again its dead as it can be?! i tried to have it with out battery over night, with battery and usb cable over nigt, old and new battery, usb from pc or from orginal AC adapter or waths it called.
it dosent light the "loding battery led" or nothing, i tried with sim in sd card out, sim AND sd out or both in nothing work i have open it and blew away all dust still dead?!
something i forgott to try?! or is this expencive toy gonna be a toy for my 8 month old kid?
Artemis goes Dead
I'm having the same problem, and have worked the same solutions. I noticed this started when I also had my phone underneath the radio in my car.
Replace radio rom
Upgraded rom to 6.1
New Battery
Unlocked Phone
Last attempt was uploading active sync 4.5 since loading version 6.1
I've got no solution yet, just posting to let you know we are in the same situation.
I have read about similar problems in different forums, and the conclusion is that it's a hardware issue. When I sent it in for support, they replaced the motherboard. I guess, there is something smaller wrong but they just replace it all.
No way.
Replaced battery, took out SIM and SD, changed ROM (finally it was long enough at life), but still:
Display freezes, turns white - game over.
I give up.
Until a few days ago I was very happy with HTC and my Artemis.
Artemis 110 (T-Mobile Compact iii) Back from the Dead
Artemis 110 (T-Mobile Compact iii) Back from the Dead, Flash via Active Sync then via SD Artemis
Since the XDA site is so valuable, I’m trying to consolidate my efforts to make a legitimate contribution to the site. Hopefully this post can also be of help to others.
These are just notes on what I’ve been through so far with my Mobile Compact iii. Hopefully, someone more advanced than I, will read through and possibly troubleshoot the errors I may have overlooked.
Upon returning from Germany, I needed to re-flash my ROM with an English version. Version of choice was the Blue & Black cube with WM6, thanks to the developer(s).
BLACK & BLUE v5.0 ROM WM6.1 CE OS 19716 ( Build 19716.1.1.0 )
First I used the USPL to temp unlock the phone
http://forum.xda-developers.com/showthread.php?t=311403
I then loaded the Operating Version, and received many stalls and stops via the White Screen of Death. (I have some theories on the white screen of death, but do not have the knowledge to confirm) I suspect utilities are running in the background and are being loaded. Impatience at this point could quite possibly be my nemesis
Second, I loaded the unlock to permanently unlock the phone.
http://forum.xda-developers.com/showthread.php?t=400445
I re-flashed my ROM again the B&B cube. Still the phone seemed unstable, was shutting down and getting the white screen of death. I hard booted the phone many times, soft booted, battery out, and through no tangible reason of thought, the phone just did what it wanted to. Start, not start, and hung up at various points in the boot process, died in the middle of Wal-Mart.
I tried the over-clock on WM6, using WM5 over-clocking. Talk about unstable. I couldn’t find and over-clock for WM6, but now know it is an option in the Blue and Black Rom. Anyway my phone went out completely. To the point of not being able to get past the initial flash screen where the OS and IS version displayed and that was it. Left the phone overnight, nothing.
In a last attempt, I used the SD mini flash option found in WIKI.
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
I used my printer SD card reader and the adapter supplied with the SD mini card. Home PC recognized the storage device, right click and format, then did the rename file (NBH file to ARTEIMG.nbh) as found on the WIKI SD Flash page. I initially tried without the format, and only got to the Red Green Blue (RGB) screen. Since I received no indication of status, I started over, formatted the mini SD, extracted the file to the SD, renamed, to ARTEIMG.nbh and I also extracted the B&B Cube WM6 Rom to the SD mini, for I found a couple of post indicating the ROM also needed to be on the SD. I followed the instructions, did the Boot-loader. (Power Button, Voice Button, and Rest with Stylus, release stylus, continue holding Power and Voice until upload prompt on the phone). I received the Update SD image, and followed the instructions. Here I got the prompts indicating status of uploads. OS 1 started to load, OS 2 loaded, phone when to RGB screen. I left the phone alone for 30 minutes at the RBG screen.
After 30 minutes, I rebooted the phone, and the phone went through setup and auto-detected my current carrier SIM card. Has been working for the past hour and 20 minutes.
Since the phone is running at the moment, I will wait and see. Next step is to load the original WM5 T-mobile version via active sync. If downloaded from the t-mobile site, the ROM update isn’t broken down enough to rename the NNBH file..
I’m also waiting to load a new radio version, for I’ve read that may be the cause of some of my problems.
Another theory I have is that T-mobile sent out kill phone code to stop my phone.
Any feedback from the Pros is very appreciated.
I have the same problem: Link to other thread
Apparently there are many devices with the same (more or less) problem.
I hope someone is able to tell what is malfunctioning....

My artemis turn off

hi
i have a problem some time my artemis turn off i don't now why
can any body help me please
I have the same problem
For anyone to do a proper problem determination, we need to know what rom you are using, what windows version and pref. also what applications you are running.
tanks for replay
i use mw6 i don't use any rom
but the phone turn off and the battery show 60%
tanks
i have the same problem, i used different windows 6.5 roms and at this moment i use Artemis touch 4.02 full with cube. witch is a stable rom. with this rom i never had that problem but now i have. i also tried different radio roms. anny solution?
Could it be a bad battery? My phone's been charging at 16%. I do a soft reset and suddenly it's up to 70%. Then at 60% it shuts off. I turn it back on again and I get the red flashing light signaling low battery before it shuts off again. I turn it on again later and it shows 40%. I've ordered a new battery for myself. Hasn't arrived yet.
i also ordert a new battery, i hope this is the solution...............
i was having the same troubles with my artemis ,i read some posts about this
problem especially one talking about a cpu issue ,i followed his advice ,i just reflowed the cpu ,and all things became right, but it so early to have
a definitive opinion ,i will use my phone intensivelly for a month and post the results
i'm having same issue also. have try warranty my unit (change system board), but same thing happen again (can;t turn on when press power button). although using the original Dopod wm5 ROM, same thing happen after warranty.
now i'm using WM6.1 V34 by PDAVIET ROM till now it's working fine. if i've update any additional Todays Item (Pointui), same thing will happen again (hang)..

XDA Orbit not running right

My XDA Orbit went crazy today, first I couldn't start him at all, he wasn't react on "power button". After few attemts he finally started. I connected him to PC but he turned off after couple minutes. From this moment I can't start windows, it stops at starting screen (with IPL, SPL, GSM, OS). After a while screen starting to quakes (like a low frequency on CRT). I tried hard reset, it won't help and run it in bootloader mode but Orbit just reset.
Additonal info:
IPL 3.04.0001
SPL 3.04.0000
GSM 02.67.90
OS 3.4.0.0
ROM: Original WM6 from O2
Can anyone help me?
Have you tried a different barttery?
No, I didn't. I don't know anybody with artemis to borow another battery.
EDIT: I checked battery voltage, it's about 3,85V and now i noticed something, on battery sticker is printed it is for ARTE160 3.7VDC-1200mAh but on the phone it's printed ARTE200 5VDV-1A. Is that can cause the problem?
Finally I forced it to run in bootloader mode and flashed with the same O2 WM6 ROM. He started and I was abble to flash USPL and other ROM. It's better but still sometimes phone just poweroff with no reason
flisak said:
Finally I forced it to run in bootloader mode and flashed with the same O2 WM6 ROM. He started and I was abble to flash USPL and other ROM. It's better but still sometimes phone just poweroff with no reason
Click to expand...
Click to collapse
Hi
Had a similar problem!!! Try reflashing the rom....It worked for me..I used the o2 stock rom found on the the artemis wiki in the ftp section.... Can also highly recommend the Touch rom found in the windows mobile 6 section of the artemis section here..
regards
Lohtse
I bought a new battery but phone still turning off and freezes. Now I can't even turn it on, sometimes it starts but screen slowly fades away and after few seconds its only black screen with black light. It's propably a hardware problem but what?
EDIT: I started it, working fine when it's connected with pc but when I disconnect it freezes after couple of minutes.
flisak
open the device and check the screen is connected propperly, piss easy, just be very carefull.
if this does not work buy a new LCD.
Hi, I have the same problem with my Artemis, did anyone find a solution? Can be a problem with the LCD?
And plus one here. The device always turn off, and is difficult to turn on again. Rplaced battery and is the same.....
I've got an XDA Orbit that periodically hangs (full black screen and occasionally this seems to drain the battery very quickly). I've taken it apart and reseated the connectors and these all look ok.
Seems to happen when you're taking it out of a pocket to answer a call etc. Sometime it just requires a soft-reset but occasionally it just doesn't respond. In these instances I have found that twisting it slightly across the diagonal (top left to bottom right bending back slightly) and then resetting the device seems to bring it back to life and it's ok for a few hour/days again. If I leave it alone, i.e. not in my jeans pocket - it's fine, so think it's hardware related but not sure which bit is faulty - screen, touch-screen, mainboard etc.
If I bend it the same as above when it's working the screen goes screwy and causes it to crash so think it's definitely this is what's causing the device to crash. However, the clock seems to keep going (I'm assuming so as in most incidents it doesn't seem to lose the correct time - although I might just be seeing the problem the instant after it has crashed) so don't know whether the mainboard is still ok.
Just thought it might help some if you try the slight twisting described above to see if that helps with these to get them working and if anyone has any ideas how I can work out which bit of mine is faulty I'd be grateful.
when I try to flash the ROM 6.5 for my HP3300 after 4% flashing it restrats again. Pls help me out. I think this problem might be with my Ext_ROM. How to unlok EXT_ ROM
what is the best touch rom to use for my xda orbit. and where can i get it
lohtse said:
Hi
Had a similar problem!!! Try reflashing the rom....It worked for me..I used the o2 stock rom found on the the artemis wiki in the ftp section.... Can also highly recommend the Touch rom found in the windows mobile 6 section of the artemis section here..
regards
Lohtse
Click to expand...
Click to collapse
what is the best touch rom to use for my xda orbit. and where can i get it
Well it seems that I'm having similar issues with my Orbit.
I've been having problems with it for a few weeks and they seem to be getting much worse now.
Occasionally it would just lock up and freeze, but after frantic tapping it will unfreeze itself and continue working fine. But over the past few days it's been locking up regulary. Removing the battery was the only way to get it going again.
But now it just won't do anytihing. As soon as I start it up I either get a white screen (it phases in during the splash screen), or it'll start up, freezes after a few seconds, then eventually switches itself off. Hard resetting it makes no difference at all. Changing the battery didn't work either. I always keep it on charge overnight, could that be the problem? Maybe I'm just overcharging the battery (if that's even possible).
Note: As I've typed this, I've switched it on again only to find the battery's flat, even though it's been off for most of the day (I gave up trying to start it up). The battery usually lasts for the whole day - maybe even 2 days if I don't use it much. I had it on charge overnight as I said.
I'll try another battery to see if that works. If not then what can I do?

Categories

Resources