I INSTALLED GARMIN QUE IN MY ARTEMIS, SEARCH COM1 COM2 ... no gps found please help me
Have you got an unlocked map installed, pm me if you have problems
the problem is that que dont recognaze the GPS but it works with visualGPS
you will need a new software called Garmin MobileXT (on MicroSD card) to work with our Artemis with build-in GPS. Other Garmin software will not see the GPS at all.
Check this site http://www.gpscentral.ca/products/garmin/mobilext.html
Related
Hi ppl,
i recently recieved a kit from Navigon, Navigon Mobile 4 with a BT GPS mouse.
I got the mouse bonded as a serial slave on com 5 & 6 and seems to be recognise by the software because i recieve at least the TMC messages.
but i got no GPS signal.
does anybody ever tryed this GPS on a qtek 9090 ?
is there a specific tool i need to install on my pda for the BT manager (options are quite poor in the BT manager)
any ideas ?
thks
Navigon needs VTG data from the GPS to work. If you have a GPS powered by a SIRF chipset it is easy : go to www.gpspassion.com and download a freeware to do the job.
i dont really know about the gps reciever furnished by navigon, there are no information about the hadware in the package, or user guide
If you have the Navigon GPS and not a non branded Navigon GPS, the issue is not the VTG...
i have the navigon BT GPS + TMC, the tmc works i recieve the signal in the software correctly, but i do not recieve any gps signal
i guess it comes from the com ports, but i really do not know how to solve that problem
i found the response, Qtek 9090 has a wildcomm BT modem so it requieres a patch available at the support page of navidon.de web site
hi,
is there anyone here knows why gps internal doesn't work ?
i think it has been desactivated by them.
do you think i can modify the key registry for modify but i don(t know what key modify ?
please help me
ORANGE SUCKS
What application are you trying to use the GPS with? - Mike
tomtom navigator 6, every application i try to use want to connect to the wap(edge)
It is quite normal for the TomTom software to try to connect vis GPRS/ Edge, it does this to support the "Plus" features such as Buddies, Traffis, Weather etc.
Have you got the application working with the GPS though yet?
select Change Preferences/ Show GPS Stautus/ configure
Other NMEA GPS Receiver
Baud Rate 9600
COM4
The small yellow/ bue disk (top right) should now be spinning, take it outside away from buildings etc, give a good line of sight to the sky and wait for a GPS position fix - don't move it around while doing this (waiting for a position fix), as movement will further complicate matters - Mike
bran2000 said:
hi,
is there anyone here knows why gps internal doesn't work ?
i think it has been desactivated by them.
do you think i can modify the key registry for modify but i don(t know what key modify ?
please help me
ORANGE SUCKS
Click to expand...
Click to collapse
tu n'as qu'à apuyer sur le bouton annuler au moment le popup sort. et c'est une fois pour toutes.
hi
i have the same probleme
Tom Tom said Me no signal GPS
and i can choose the inside GPS Receiver.
Hi,
please can someone tell me, why the inter gps only works with TomTom
on my XDA ORBIT?
I tried MioMap from a friend, but it tells me: No GPS was found.
Same problem with other software like gpstuner / smirftech and so on.
What can i do?
Is there a trick?
Are there tools to tweak the gps ?
Please give me an tip.
Big THanks
Bye
On my MDAC3 it works fine with both Tom Tom and Memory Map and it also worked with Pocket Earth.
Regards
TomTom is not the only software that works with the internal GPS - I tried several that worked (for example, ESRI ArcPAD 7.01 and MagicMaps2GO 2).
But you are right, GPSTuner doesn't work - it locks up my device while trying to find the GPS. There is a workaround described in the GPSTuner-Forum: You have to install GPSGate (software that works as an intermediary between the GPS and any other software) (http://gpstuner.com/forum/viewtopic.php?t=1044).
But contrary to what the developers of GPSTuner think (namely, that TomTom locks out every other software from using the internal GPS), I don't think that's right because at least to different applications from different vendors work. There has to be something else...
Ah, big thanks!
Please tell me your config for GPS.
Why you can find the gps intern for MioMap!
I have got the same hardware like you!!
Please
Big big thanks
works ok with igo2006 and papago7 also
the problem is with destinator6 last version 6.1.1.4000
and we waiting for a bugfix from destinator tech.
a trick that can fix this prob is if you put the version with tmc and have always the tmc on,with this the com port stays open
config
com4 baud 115200
tmc on com4 9600
thiw trick was find from user Minotavrs
*sorry for bad english
Please help, i dont understand it???
What can i do for MioMap?
It doesen´t find the gps hardware.
djsven said:
Please help, i dont understand it???
What can i do for MioMap?
It doesen´t find the gps hardware.
Click to expand...
Click to collapse
i explain what i do for destinator 6 last version
i do not know miomap
but my config on alla programs is com4 nmea baud 4800
did you try that?
Ah ok!
You set in windows mobil5 gps Port Com4 an Baut 4800!
Ok.
So will try it.
Put no hope.
WOnt work.
Hi, i am Antonio from italy, sorry for my english.
I have this problem: i installed garmin xt mobile on my omnia, created the file unl helped by keygen, but it doesn't work. It doesn't "see" gps.
Help me please.
Antonio
gps in omnia
i use igo8 in omnia and gps signal work in port 3 baud 38400 but first time i wait 1 houre outside whit clear sky for satellite....just wait....
cerca qui
azimuth56 said:
Hi, i am Antonio from italy, sorry for my english.
I have this problem: i installed garmin xt mobile on my omnia, created the file unl helped by keygen, but it doesn't work. It doesn't "see" gps.
Help me please.
Antonio
Click to expand...
Click to collapse
set gps com 3 com 9 baud 57600 in iGO8 set com 3 baud 57600 but befor start igo8 you are ned a file XTRA download from internet
its work fine with Nav N Go iGO 8.3.2.97313 PDA torrent
http://www.torrentreactor.net/torrents/3245316/Nav N Go iGO 8.3.2.97313 PDA
and with GarminMobileXTforWindowsMobile_50020w (sit garmin )
cerca www.ipmart-forum.it helps with your leanguage
they can healp you
sys txt is a file used by me in iGO8
garmin
azimuth56 said:
Hi, i am Antonio from italy, sorry for my english.
I have this problem: i installed garmin xt mobile on my omnia, created the file unl helped by keygen, but it doesn't work. It doesn't "see" gps.
Help me please.
Antonio
Click to expand...
Click to collapse
ecu qui te interesa te
http://www.ipmart-forum.it/showthread.php?t=4775&page=12
hi all,
i am running tomtom 7.915.9196 and the gps status say's no GPS-Device!
google maps works fine. so i think the GPS reciver isn't broken.
what to do?
Greetz...
Mine works,
Have you check in the settings?
setting>GPS>scroll to select "integrated GPS receiver"
Make sure to update QuickGPS too
dutch:
locatie-instelling moet worden ingeschakeld zodat de nieuwste satellietgegevens kunnen worden gebruikt om de gps-positiebepaling te
versnellen
English
region settings must enabled.
how to enable this setting?
Greetz.
I had the same issue with my phone, fresh from the box, i installed few apps, then registed tomtom 7, and no GPS, even quickgps wants me to select a region settings which i have no idea about.
ended up hard resetting, but thinking about it it might have been the HTC GPS tool, i had from my diamond days, thats the only gps related app i had on the phone
phigafr said:
Mine works,
Have you check in the settings?
setting>GPS>scroll to select "integrated GPS receiver"
Make sure to update QuickGPS too
Click to expand...
Click to collapse
I mean
setting>GPS>scroll to select "integrated GPS receiver
from tomtom menu
The only work around to this problem that I know off is to load either Goggle maps or Live Search, let the program active the GPS and then load TomTom. This works 100% of the time.
I stop using TomTom and end up getting Garmin XT. Have never seen this problem with Garmin.
Note:
I have a Touch Pro.
neorotic said:
dutch:
locatie-instelling moet worden ingeschakeld zodat de nieuwste satellietgegevens kunnen worden gebruikt om de gps-positiebepaling te
versnellen
English
region settings must enabled.
how to enable this setting?
Greetz.
Click to expand...
Click to collapse
I had the same problem. Just a simple soft reset did the trick.