Related
I was using it pretty good and suddenly my memory card appear and disappear when ever i reset my ppc. Now, i cant detect it anymore on my dopod 838 pro. Any idea or comments i can do to verify that the memory card is the problem (if it is still alive?) really need some advise and thanks in advance!
gerald20000 said:
I was using it pretty good and suddenly my memory card appear and disappear when ever i reset my ppc. Now, i cant detect it anymore on my dopod 838 pro. Any idea or comments i can do to verify that the memory card is the problem (if it is still alive?) really need some advise and thanks in advance!
Click to expand...
Click to collapse
Pull the card out and pop it in a Normal PC Card reader and see if you can see the contents. For some reason PPC's will occasionally corrupt the formatting of the card to majke it unreadable to it but PC's sometimes can. If you can read it with a PC, then copy the contents off, reformat usign the PC and copy the contents back and try it in the PPC again.
ok will do that. but isnt that dangerous to lose data tat way? also, when i could read the memory card, the folders r there but the files r gone. possible virus?
i can find my memory card on the card reader. i tried formatting it but it gave me an error "Window is unable to complete the format". What is wrong?
Were you able to copy your info off of the card? How were you trying to format it?
Make sure that you DON'T have a window to the card open when trying to format.
HELP ME WITH ADVISE!
My problem is back again. My data at certain folder in the memory card is disappeared but still able to browse the memory card. Then i soft-reset a couple of times and the data comes back. It took the dopod 838 pro to read the memory card very long time b4 able to show the data on the card.
What should i do?
Check the registry key HKEY_LOCAL_MACHINE\System\StorageManager. There are two DWORD values - PNPUnloadDelay and PNPWaitIODelay. If they are not set to 8196 - do that.
its 8196 as posted...
Looks to me like 2 possibilities:
Your SD Card is shot; or
Your phone has lost the plot.
If it reads OK on the PC card reader, the card is probably OK.
I'd try a hard reset of the phone first. (Make sure you have backed up everything first.)
Also, clean the SD slot as best you can to make sure there are no biscuit crumbs or old socks fallen into the hole.
gerald20000 said:
i can find my memory card on the card reader. i tried formatting it but it gave me an error "Window is unable to complete the format". What is wrong?
Click to expand...
Click to collapse
Seems like some problems with this card. You didn't try another one?
Hopefully someone on here can help me. I've just been adding speecameras to the Tomtom app on my HD. The first set went on OK, but when I tried adding a second, then starting up the Tomtom app to check all was OK, it came back with the following message:
"The file 'TomTom Navifgator' cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be foind. If the problem persists, try reinstalling or restoring this file."
Now I wouldn't mind doing as it says, but I thought I'd try a soft reset first - but when the phone 'booted' back up, all of the other installed apps, also failed, with the same message.
Apps include gsen, HD Tweak, mini gps, among others.
These were all working fine previously.
Anyone have any ideas as I don't want to have to re-install all of them again?
Thanks.
sounds like a corruption has happened somewhere. check your SD card (if that's where you installed them) and look for suspicious characters, or missing files. When it happened to me on my old phone all the directories were suddenly empty!!
I did install them all on the sd card. Had a look and it doesn't appear to be corrupt.
Boris71 said:
I did install them all on the sd card. Had a look and it doesn't appear to be corrupt.
Click to expand...
Click to collapse
Did you change any settings with HDtweak, have the same problem at this time, only programe I added was HD tweak 5.4.x. Good luck
Maybe the same problem
I've also had a problem like this once on my HD. I remember, I had just installed HDtweak when it appeared first time. I could not find any solution on how to fix it, so I did a Hard Reset...
Hope anyone can fix it.
My HD said that ".NET framework 3.5" is needed (it was installed), and I tried over and over again to reinstall it, but it just gave me another error. Do your device do this?
Had a similar problem, after using Storage Card and HD in USB mode. All of a sudden my Storage Card appeared in Windows and Resco Explorer twice, Storage Card and Storage Card2. Of course none of the programs would want to start, since the path was changed.
I copied all the programs from the storage card to the desktop (with the intention to reformat the card), reset the HD without the storage card, put the card back in - card #2 was gone - and copied all the files back to the card. Solved my problem.
Very odd. Bit the bullet and started re-installing the apps (not as painful as I thought actually) and they all installed, overwriting the existing version - except, similar to Lucas 0511, they seemed to now be on Storage Card2. And a 'normal' (on device) folder had been created, named Storage Card.
All works OK, but I really don't understand it!?!?
Lucas0511 said:
Had a similar problem, after using Storage Card and HD in USB mode. All of a sudden my Storage Card appeared in Windows and Resco Explorer twice, Storage Card and Storage Card2. Of course none of the programs would want to start, since the path was changed.
I copied all the programs from the storage card to the desktop (with the intention to reformat the card), reset the HD without the storage card, put the card back in - card #2 was gone - and copied all the files back to the card. Solved my problem.
Click to expand...
Click to collapse
I encountered similar problem in the past.
Both My diamond and HD also have got similar problem.
Diamond: suddenly showed up 2 internal memory.
HD: 2 SD card.
One episode, my card was even corrupted.
=>>
I think your card was corrupted.
No, not corrupted, but during USB disk drive mode access to the card for other apps is blocked. So if an app on the device (in my case usually Opera) attempts to write to the card during USB disk mode it cannot find it - and hence will create and write into a new Storage Card folder.
After the USB disk drive mode is closed the folder name "Storage Card" is now taken, so the card will automatically be reassigned to "Storage Card2" - and apps installed to Storage Card previously will no longer find it.
Solution: Delete the "new" Storage Card folder, card out, reset, card back in - and all should be back to normal.
I've had this problem too. It'll manifest as all the icons for programs installed on your SD showing up as blanks. When you go into your file manager you'll see Storage Card and Storage Card2. Storage Card2 is your storage card, but because all your shortcuts are looking for stuff on Storage Card, it can't find the data.
One cause may be that for some reason your mail application starts writing attachments to a new, non-existent storage card. All you have to do is delete it. (Make sure you're deleting the right one - you can remove the other if you want to be belt-and-braces safe, but just checking in the file manager is probably good enough.)
I've had this problem a couple of times on my Kaiser. Unfortunately the only way to correct it was to do a hard reset as I couldn't find any solution anywhere. So far it hasn't happened on my HD.
cont...bugs88...
if your device is showing 'storagecard' and 'storagecard2',
remove memory card, now the file explorer will still show 'storagecard',
delete the 'storagecard' and reinsert the memory card,
perform soft-reset.....
I've got a Tilt 2 with hard spl and can flash from my desktop no problem. I'd like to get the flashing via SD card going, but it's hanging.
I've got the nbh file copied to the root of my SD card, get the phone into bootloader, but I see a message flash up about no image. It's very quick though and then the phone hangs in the bootloader. A soft reset fixes it and the phone boots up.
I'm clearly missing something and can't figure out for the life of me what it is.
The image file is named correctly. It was copied to the phone through WMDC to the SD card. Should I put the phone into disk mode a copy the image over?
The SD card is formated in Fat 32.
Any thoughts/Advise?
Thanks.
maybe..
i had this issue before - check your .nbh file with total commander, or put it in your pc and check it. if you name it .nbh with the wm file explorer, it actually ends up RHODIMG.nbh.nbh - solution is just to remove one .nbh!
:::Whimper:::
I'm having this exact same problem!
My RHODIMG file is named correctly and in the root directory (there is nothing else on the SD card either), but I get that same EXTREMELY BRIEF message about no IMG file and then it hangs at the bootloader screen with 'Serial' in the white box on the bottom.
I've even tried using Mobile Flasher, but nothing is working. I
What am I missing??? I've tried it many times already, formatted my card a few times and loaded the RHODIMG file again, but nothing! My Rhodium will NOT connect via USB anymore, so I need to flash via SD card.
Help!
Debbie
I actually don't even rename the file, it's already got that name from the rom. It's e2 manilla 2.5 rom.
I'll try and transfer the file to the card when the phone in disk mode and see if that makes a difference...
O-M-G(!), this is *so* freakin' wacky!!!
I just switched SD cards to one that was larger (8GB rather than the 2GB), that had tons of stuff on it, then copied the RHODIMG file in the root, and then ran 'enablerapinew.cab' again, just for the hell of it...
Damned device found the RHODIMG file there from the bootloader and the update ran as expected, but not on the 2GB card with nothing else on it! WTH?!
Device says that the update is complete, so I'm booting up now and will do a few resets and then perform the tedious task of setting up my Tilt 2, etc.
Don't know whether the cab (thought I only had to run this once when Hard SPLing?) or the different card was what caused it to work, but I hope this helps someone else with the same problem. Whew!
Debbie
...Who's back in business!
SOLVED!
I don't know what caused the magic, but I was able to flash from SD card... FINALLY!
Here's what I did: Flashing Via SD Card Assistance
Hope this helps others!
Debbie
No, this did not work for me. I tried installing the cab again, but no luck, just passes on by saying no image.
Delete image off sd card, reformat FAT32 and copy image back on... I have had this problem myself, it seems that when the .nbh file copies it doesn't register on the card properly or something. Either deleting the file then re-copying seems to work but I still like to reformat too..... DON'T just copy over the top of the image file... THIS DOESN'T WORK... leads to a lot of hair pulling frustration...
Cheers...
So I tried a reformat of the card, just a quick one, not full. Still didn't work. I downloaded another image to try out, the lastest Energy rom, to flash on a completely blank card. That didn't work.
So, I went and got an older card, 8 gig, that is currently being used in a camera. The one I use now is a 16 gig card. This one worked fine.
Conclusions being perhaps a 16 gig card won't work for flashing?
brands
i have heard of certain brands having sizes that didn't work for flashing, for whatever reason. It was a long time ago on my kaiser, so i don't remember which it was, but kingston 2gb comes to mind. like i said, don't know if that is accurate, but there definitely were some that just wouldn't work. perhaps a different brand 16gb?
Well, I used the other memory stick, a Scandisk and this worked fine. Must be something with the 16 gig Kingston disk as it just will not work.
So I have a Samsung SD card and was immediately prompted to advise it was corrupt when I first flashed a CM/AOSP ROM. When I got the time to do so I backed up the contents, formatted from the prompt and copied stuff back over.
The problem now... The SD card cannot be written to by Titanium Backup. Edit the permissions platform.xml file you say? Nope didn't work. Nothing suggested worked.
I finally got it working by formatting everything, installing a Sense ROM and then formatting again once it said it prompted to. I can write to "SD Card 2".
However, I'm weary going back to AOSP/CW that I'll be back to square one again.
Has anyone encountered the same issues and what did you do?
kickassdave said:
So I have a Samsung SD card and was immediately prompted to advise it was corrupt when I first flashed a CM/AOSP ROM. When I got the time to do so I backed up the contents, formatted from the prompt and copied stuff back over.
The problem now... The SD card cannot be written to by Titanium Backup. Edit the permissions platform.xml file you say? Nope didn't work. Nothing suggested worked.
I finally got it working by formatting everything, installing a Sense ROM and then formatting again once it said it prompted to. I can write to "SD Card 2".
However, I'm weary going back to AOSP/CW that I'll be back to square one again.
Has anyone encountered the same issues and what did you do?
Click to expand...
Click to collapse
Sort of. Every time I flash an aosp ROM it tells me the card is corrupt even if I'm just trying to use u it as portable/external. I backed everything up to my Mac book and formatted the card in the phone on CM13 but, when trying to transfer stuff back I lost my nandroids and a couple RUU.zip files. It still tells me the card is corrupted even though I did format it. I don't remember if I had write issues after that. At this point I have just about given up on aosp since I'm not going to copy and then format the card every time.
Same issue.
Does anyone have a solution for this ?
rahulsethi said:
Same issue.
Does anyone have a solution for this ?
Click to expand...
Click to collapse
The SD shows up as corrupt, or Titanium can't write to it?
What did you try to do, and what were the results?
Posting "same issue" without giving any details is never a good way to post. More detail is always better.
Hi,
did you try this fix for TB?
http://forum.xda-developers.com/showpost.php?p=64662204&postcount=3
redpoint73 said:
The SD shows up as corrupt, or Titanium can't write to it?
What did you try to do, and what were the results?
Posting "same issue" without giving any details is never a good way to post. More detail is always better.
Click to expand...
Click to collapse
No , I just get a notification that sd card is corrupt. There is option of setting it up too but in there when I select "use as portable storage , it asks me to format it ".
In any of the apps , sdcard doesn't show up or even option show sdcard.
rahulsethi said:
No , I just get a notification that sd card is corrupt. There is option of setting it up too but in there when I select "use as portable storage , it asks me to format it ".
In any of the apps , sdcard doesn't show up or even option show sdcard.
Click to expand...
Click to collapse
I don't use AOSP ROMs on the M8, but I do on my Samsung Tab Pro 8.4. On that device, I get this error message (SD card corrupt) every time I flash an AOSP ROM. One thing that you can try which often works for me (but not always) is to put the card into a USB card reader, connect to PC. It should automatically detect the card, and give you a popup window asking you to scan and fix the problems. It has 2 choices with check boxes (forget what they say exactly) of which the first is checked by default, the 2nd is not (and takes a lot more time). Try the first choice, which should just take a couple minutes; and should also preserve the data on the card. Then re-insert the card into your M8 and see if it reads properly. If not, you may at that point want to copy the data on the SD to your PC while you can. You may need to resort to formatting the card, than copying the data back to it (I've had to do this at times).
I haven't seen any other solutions, or explanation of what is causing this.
redpoint73 said:
I don't use AOSP ROMs on the M8, but I do on my Samsung Tab Pro 8.4. On that device, I get this error message (SD card corrupt) every time I flash an AOSP ROM. One thing that you can try which often works for me (but not always) is to put the card into a USB card reader, connect to PC. It should automatically detect the card, and give you a popup window asking you to scan and fix the problems. It has 2 choices with check boxes (forget what they say exactly) of which the first is checked by default, the 2nd is not (and takes a lot more time). Try the first choice, which should just take a couple minutes; and should also preserve the data on the card. Then re-insert the card into your M8 and see if it reads properly. If not, you may at that point want to copy the data on the SD to your PC while you can. You may need to resort to formatting the card, than copying the data back to it (I've had to do this at times).
I haven't seen any other solutions, or explanation of what is causing this.
Click to expand...
Click to collapse
Thanks , I'll try and doing so
Hey guys and girls!
This morning my phone turned off by itself (13% battery left) and needed somewhat longer than usual to reboot (in the meantime I plugged it back in to the charger). First thing I noticed was that my whole theme got reset as well as it started showing me introductional tips ("long press here to move your apps to the homescreen, ecc.). It also started to update apps in the Play Store even though I set it to manual ... so basically a LOT of things were reset.
The biggest problem I'm having now is though that all my files (pictures, videos, music) that are stored on an external micro SD card are corrupt. It's not possible anymore to open anything. I already removed the micro SD card and put it into an adapter to have a look at the files via the laptop. But nothing, even though the sizes of the files seem OK, I can't open them.
Does anyone have a clue as to what exactly happened here? Are those files lost (at least of some I have a backup) or is there anything I can do to "repair" them? Help is really appreciated, thanks!
PS: Things like the card unmounting and re-mounting never occurred. So I can't tell if the card was dying or if actually the phone ruined my files.
Did you happen to be using a SanDisk SD Card? I've had my 10 brick 2 of those until I switched to Samsung SD Cards about a year ago and haven't had issues since.
I never could manage to recover files from the damaged SD cards.
I have a Samsung SD card and had something similar.
I guess I was on Viper Rom and basically my phone restarted around 15-20% of battery. After a long wait for booting back again, all my settings were gone.
Files and others in the SD card was okay but basically until I formatted the card, I wasn't able to boot into the Download Mode to install a new rom...
I fixed the restart issue by installing the official HTC Rom.
Thanks for your replies.
It is indeed a SanDisk 16GB card. It seems though that the card is still working (no problems accessing it via phone or laptop), just the files appear to be broken. In the meantime I also tried apps like PC Inspector File Recovery, but to no success
I'm still on stock HTC Sense by the way, no root, nothing.
Anyone know though why that happened (resetting everything, etc.)?
Hit me with a PM I'll give you a SanDisk restore tool which works quite ok. there is a huge chance some files can be recovered, some will be damaged though. Don't push any new files on the card after you tried to restore the files
HTC 10-Corrupted microSD card
I know this is an older thread, but I was wondering if there is a solution. I have an HTC 10 which has an micro SD card in it, that is "married" to the phone. When connected to a computer, the computer recognizes the phone, and the microSD card, and begins to load the folders/files. Eventually this process stalls, and the phone/drive is no longer readable by the computer. To get the computer to recognize the phone/card again, I need to restart the phone, but the same thing happens again.
I have like 20gigs of data on the card, and cannot just put the card in a reader, because it's encrypted to the phone. Any possible solutions? It's frustrating to see the files/pictures for a minute or two, and then have them disappear. I have tried copying/pasting the files while they're visible, but this often triggers the computer to no longer recognize the phone/memory card. I've tried to un-encrypt the microSD card, but the phone can't recognize/access the microSD card long enough to complete that process.
Please help if you can.
Glenn