Related
At last - better late than never
http://msmobiles.com/news.php/5767.html
dos it work with jright 3.2 roms
i confim we can now use voice command with the lid close. ha wicked feature
Whats the deal with it only being a US release? Does that mean it won't work on UK phones???
Tattootroy - from a universal point of view is it worth it? or like previous versions are there big scarfices made??????
mrbrightside1977 said:
Whats the deal with it only being a US release? Does that mean it won't work on UK phones???
Tattootroy - from a universal point of view is it worth it? or like previous versions are there big sacrifices made??????
Click to expand...
Click to collapse
trust me it worth it. it still works on uk phone and it understands me very well i can now say dial then a number .1.5 could not recognize my zero and sixes .
best of all we can now use our bluetooth headset to activate it wile the lid is close it also read out text and email headers .
just need to know now if it works on the 3.2 roms
It works very well with AKU 3.2. It's great. I've tested and this was the program we were expcting long time ago.
Where can you get it?
The posts above do not show where the newly released Microsoft Voicecommand V1.6 for WM2005 can be sourced.
It may be available through other suppliers but I found it at:
http://www.handango.com/PlatformPro...806&Ntt=voice command&productId=90635&R=90635
Users who previously purchased V1.5 can purchase this US English version as an upgrade at $9.99 plus VAT. New purchase is $39.99 plus VAT.
I have installed it on my Universal over Ivan's Beta 14 ROM. It works exactly as V1.5 works on WM2003. No tweaking or .dll file changes (other than those done by the install) are required. There are no new features, this release seems only to provide the same functionality as V1.5 but compatibility with WM2005.
Microsoft Voice Command 1.6 does not appear to announce incoming calls for me. I'm using Beta 14 of Ivans rom. And, yes, I have checked the option under the Microsoft Voice Command Applet.
Using Version 1.60.4622.0
My bad. It was only announcing through Bluetooth
VoiceCommand 1.6 and Cyberon
Voicecommand works great on Ivan's AKU, but I prefer Cyberon for making calls as it understands better my tags than vc1.6 reading them from my contacts.
However, when I installed vc1.6, Voice speed dial has stopped responding even when vc1.6 is not enabled.
Any tweaks/suggestions?
Still seems to have a bug with button operation on the universal, the voice dial button will only register as press and hold (which defaults to record unless you change it). There's probably a registry setting for it but I don't know which one.
This might be an obvious question, but how do you get voice command to work with the lid closed?When my uni is closed (and I guess powered off,stand by) the program doesn't respond. when I open the lid a very little so that the screen turns on, voice command works. Any tips?
Thanks
it only works with lid close when you are using button on a bluetooth head set. may be it will be hacked soon so we can use device button whe lid is close
I figured as much. I didn't find the "start menu-settings-buttons" very helpful in that respect. I'll just have to live with it for the time being. Btw, it's the first time I'm using this program and it's pretty awesome.
wrong section?
this should have been posted in general since this application supports pocket pc and smartphones!!!!!!!!!!!!!!!!!!!!1
Bluetooth function not working
Voice Command 1.6 has a great functionality for universal that it will work when universal lid is closed, but bluetooth function (Where it is suppose to annouce incoming calls and other notification via bluetooth) is not working for me, even when the appropriate box are checked. I alos re-paired my headset.
Is there any setting (registry), that I should be checking to see if everything is appropriate.
does it work on windows 6.1 htc touch hd i want to buy but want to make sure it works
jvworldchampion said:
The posts above do not show where the newly released Microsoft Voicecommand V1.6 for WM2005 can be sourced.
It may be available through other suppliers but I found it at:
http://www.handango.com/PlatformPro...806&Ntt=voice command&productId=90635&R=90635
Users who previously purchased V1.5 can purchase this US English version as an upgrade at $9.99 plus VAT. New purchase is $39.99 plus VAT.
I have installed it on my Universal over Ivan's Beta 14 ROM. It works exactly as V1.5 works on WM2003. No tweaking or .dll file changes (other than those done by the install) are required. There are no new features, this release seems only to provide the same functionality as V1.5 but compatibility with WM2005.
Click to expand...
Click to collapse
does it work on windows 6.1 htc touch hd i want to buy but want to make sure it works
Never had a problem with Voice Command and any ROM on Uni and other WM devices. The correct settings that work for me: those with button problems should be disabling locking all buttons, assigning a button for Voice Command (I assigned the one for Voice Recording), setting 'Announce Notifications using Bluetooth hands free if available' through settings, enabling microphone noise reduction and Voila!
I use Voice Command for all sorts of things, when I listen to music over the bluetooth it is a god send. I got Pocket Player set up as a default, so all you have to do is say 'Play Music' and you will be asked to make a selection or play anything etc. The only time where I get a bit of a problem is advancing tracks.
And yes, I do realise it's a VERY old thread
Has any one got MS Voice command to work on XDA Live... I can't get 1.5 to work and really don't want to spend more money to upgrade to 1.6 anyone know why it won't work. It gives Error at start up. Also does anyone know how to get the threaded sms off of my palm treo705 to put on my hermes?
chrisryn said:
Has any one got MS Voice command to work on XDA Live... I can't get 1.5 to work and really don't want to spend more money to upgrade to 1.6 anyone know why it won't work. It gives Error at start up. Also does anyone know how to get the threaded sms off of my palm treo705 to put on my hermes?
Click to expand...
Click to collapse
I had the same trouble with MS 1.5 in the AKU 3.3 upgrade and when I went to MS 1.6 it worked. MS 1.6 works fine in the XDA Live rom. I am afraid you may have to upgrade.
SK
I have installed it and It does activate VC but only through the device mic not through the headset. What is strange is that on my Wizard with WM6 VC1.6 worked perfectly straight away.
Can anyone post the Cyberon Voice Dial cab. I would like to try that with my Headset Thanks
Jules
Same here the headset doesn't work but thats no surprise really it NEVER works..
I have even tried the old hack and all it does is crash with an error..
VC 1.6 Required
As XDA-Live is a post AKU3 OS, you have to use VC 1.6 to have any of the capabilities. VC 1.5 only works up thru AKU2 ROMs.
I also am unable to get VC 1.6 to work with my headset, the XCSdM patch crashes on me (as mentioned in another post).
Dean
Cingular 8500
XDA-Live
Radio 1.35
Try This
Here everyone, this file got my bluetooth headset to work with VC 1.6 in Crossbow on my old wizard. Maybe it'll work for you, I haven't tried it on the Hermes.
Unfortunately, the hermes has something different in its MS bluetooth stack and that's why there are issues with MS VC..It is even listed on microsoft that there are issues with the bluetooth stack for hermes and a few other phones.
I tried the Widcomm stack and it seems to work well with MS VC and WM6 on the hermes, but be aware the Widcomm stack is still in developmental stages...so don't complain if you find issues with it...but it works for me
eagle 1 said:
Unfortunately, the hermes has something different in its MS bluetooth stack and that's why there are issues with MS VC..It is even listed on microsoft that there are issues with the bluetooth stack for hermes and a few other phones.
I tried the Widcomm stack and it seems to work well with MS VC and WM6 on the hermes, but be aware the Widcomm stack is still in developmental stages...so don't complain if you find issues with it...but it works for me
Click to expand...
Click to collapse
Can you activate VC through the headset though?
drbowden said:
As XDA-Live is a post AKU3 OS, you have to use VC 1.6 to have any of the capabilities. VC 1.5 only works up thru AKU2 ROMs.
I also am unable to get VC 1.6 to work with my headset, the XCSdM patch crashes on me (as mentioned in another post).
Dean
Cingular 8500
XDA-Live
Radio 1.35
Click to expand...
Click to collapse
I as well.... i guess it was a bad time to upgrade since i'm going on vacation tomorrow... oh well... atleast AD2P works great with WM6 and my SE 970
I installed VC1.6 and the BT Voice Command Hack by XCSdM
http://forum.xda-developers.com/showthread.php?t=283412
....my VC1.6 is working thru my Jawbone except for notifications......If I say "dial xxx-xxxx" it repeats the query back to me thru the jawbone!
8525 sim/cid unlock
XDALIVE w/ updates
Radio 1.34
Jawbone BT set
FU5 KONA said:
I installed VC1.6 and the BT Voice Command Hack by XCSdM
http://forum.xda-developers.com/showthread.php?t=283412
....my VC1.6 is working thru my Jawbone except for notifications......If I say "dial xxx-xxxx" it repeats the query back to me thru the jawbone!
8525 sim/cid unlock
XDALIVE w/ updates
Radio 1.34
Jawbone BT set
Click to expand...
Click to collapse
I have the .9f BT VC hack from xcsdm which isn't working...... i have never edit the registry before manually but willing to do it as it looks like the error of the program is that it isn't saving properly..... where can i find the values to change?
You shouldn't have to edit the registry with that fix. The fix is only for VC1.6, which is the only version of VC that is compatible with WM6. Think of it as when you updated to Windows 95, and your Windows 3.11 programs wouldn't all work - you're doing the same thing to your phone .
For the record, I'm running VC 1.6 on the Vanilla WM6 Rom, using the XCSdM patch only.
Heres my fix
Ok I got vc1.6 to sorta work the way I want it to. I upgraded to the widcomm stack and added the btfix hack listed in other thread. I can get vc1.6 to work with ptt button but not headset button. Hopefully this will be fixed with final development of widcomm. Haven't had a chance to check if all notifications come through bt or not.
I had to manually go in and ad a value to the reg in order to get the button on the BT to work as well as using the patch.....this is the setup.....
1. Install VC 1.6 (make sure it is in Main memory)
2. Download Bluetooth Voice Command 0.9f.cab
3. Download BTVoiceCommand.exe
4. Create the Folder \Program Files\Bluetooth Voice Command
5. Copy BTVoiceCommand.exe into this folder
6. Run .9f Hack
7. Go to newly created BT Voice Command config (in Programs) and tick off the check box "Enabled"
8. Set command duration to 30
9. Set or check that the following registry keys are set (I had to manually change Path to BTVoiceCommand.exe.)
10. HKLM\SOFTWARE\OEM\VoiceCommand\Path = "\Program Files\Bluetooth Voice Command\BTVoiceCommand.exe"
11. HKLM\SOFTWARE\OEM\VoiceCommand\VoiceCmdDuration = 30
12. HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = "\Windows\btagext.dll"
a. (For reference: http://forum.xda-developers.com/show...=283412&page=7 )
13. *Go into the registry and set HKLM\SOFTWARE\OEM\VoiceCommand\ LaunchAPEnable to 1 (I wasn't sure if this was necessary...but it's working now)
14. Soft reset 8525
15. Delete Headset Pairing
16. Recreate Headset Pairing.
17. Set Side button to VoiceCommand
18. Reset Device
Thanks tp BKBrolier for posting this! The red section is what I had to manually add....once added I was flyin high!!!
Good news is coming
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Bravo, xcsdm! Look forward to the update. I have to be sure M$ VC 1.6 will work before I go to WM6.
Ben
VC 1.6 & WM6 Announce Incomming Calls
Thanks for all the efforts working to get VC 1.6 working through BT headsets. I am awaiting my new headset Plantronics 665. However, I have installed VC 1.6 and mainly want to use it for incoming voice notification of person ringing. This always worked out of the box before. I have ticked all the right boxes under settings (Ticked) Speak notifications through device speaker or wired headset only and (Ticked) Announce incomming calls.
The phone rings, vibrates but not VC announcements of incoming call. Thanks for taking the time to read and any ideas/suggestions welcome. Worked perfectly, well most of the time under 1.5?
Tom (Blackburn UK)
xcsdm BT VC 1.6 hack
I don't even get the shortcut in programs and btvoicecommand if I click it it just starts voice command.
xcsdm said:
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Click to expand...
Click to collapse
Thanks for the patch working good so far. Let me know when you get the new btagext.dll done i'll test it for you if need be. Keep up good work.
You are my hero man!!!
MS Voice Command is proving to be a real PIA to embedd into the Rom but We're probably better of not doing that anyway as tere are many who don't user or want it (yeah I know) and even a few who prefer Cyberon's Version....
xcsdm said:
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Click to expand...
Click to collapse
Hi there I'am new here.... seached the forum and google a lot but didn't find an answer...
Just flashed from XDALive 2.0 to Black 2.0, radio 1.38.00.10 and HardSPL v6 with help of the manual of mrvanx.
My problem with the rom of XDALive 2.0 was that TomTom 6 keep hanging serveral time. The headset (bluetooth build in CAR, peugeot 207) was working perfectly. After the upgrade to Black 2.0 the TomTom problem was solved , it works perfectly now. The only what came up was the bluetooth headset probleem. The connection is ok but I don't hear any sound??
Flashed back radio ROM to 1.35 no results...
Found something interesting...
When its not connect with the carkit, turn on bluetooth, dail a numbers and turn on the Speaker, it will eventually connect to the carkit automaticly (and I got sound thourgh the carkit!
When searching for bluetooth devices it will find the headset and the carkit goes into 'calling mode'. When dailing a contact directly after that the carkit will work. But the next try it will mute the radio but doesn't give any sound on the carkit.
When allready connected with bluetooth on the carkit it wont give any sound thourgh it.... strange.. Tried serveral other ROMS but they are giving me the same problem...
Widcomm BT Stack (http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72) also tried, didn't help... anyone some suggestions?
PS.: My old nokia still works, it can't be the carkit..
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
jcb_home said:
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
Click to expand...
Click to collapse
When searching for a new bluetooth device WM6 sees a headset and the connection is successful. The 'Set has headset' is availible and is set. The option Wireless Stereo isn't support I think, its not availible as an option.
When calling you can turn on/off your headset back to the phone. That works but there is still no sound on the headset.
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Same problem with HS850
simon_darley said:
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
Click to expand...
Click to collapse
I have exactly the same problem, and I didn't solved yet....but I've found this bypass:
When the phone rings I answer with the bluetooth handset and receive the beeb on connect call.....then I close the BT headset and as soon as I re-open it, I have the headset working.....I have to do this for every incoming or outgoing call.
My BT headset was working well with the black 1.2.
This is the only issue I've found in the black 2.0.....I think is the most stable and fast rom.
Bye prengo.
jcb_home said:
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Click to expand...
Click to collapse
My other Bluetooth devices are working fine. My bluetooth GPS receiver works just fine with TomTom... no issues there.
Just flashed back to XDA-Live (v0.20.1) and the headset works without any problem.
Only thing now is Tom Tom 6 hangs directly after the start of it. Anyone familiar with this issue?
thx
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
A common thread seems to be the HS850
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
cruzer said:
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
Click to expand...
Click to collapse
WMXL .20 is based on a beta WM6 build and Black 2.0 is built on an RTM build (non-beta)
With Moto HS850 too.
edwinyuen said:
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
Click to expand...
Click to collapse
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
mike6502 said:
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
Click to expand...
Click to collapse
It's great that you tracked this down so specifically. I guess this means for those of us with these issues, we have to avoid newer WM6 builds until someone looks into this.
idee2000 said:
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
Click to expand...
Click to collapse
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
rabdo said:
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
Click to expand...
Click to collapse
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
AdamsJourney said:
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
Click to expand...
Click to collapse
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Hi,
I am using radio rom 1.40.30 and Black 2.0.
I am using H700 BT headset
the problem i face are opposite from you all.
If i am already talking halfway and i flip the boom to continue talking with the BT headset...it won't work.
if i receive a call and I flip the boom while the phone rings, it is ok and i can even press the button on the h700 to answer the call.
Radio 1.40.30 seems to connect with the BT headset much faster.
last time when i was using my previous default factory rom, when i flip the boom while the phone is ringing, it will take ages to connect
why not u guys try radio rom 1.40.30 also
rabdo said:
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Click to expand...
Click to collapse
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
edwinyuen said:
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
Click to expand...
Click to collapse
Sorry, what I meant is that perhaps Cyberon Voice Commander is 'fixing' the issue on my system, rather than saying MS VC 1.6 was causing the problem. Next time I hard reset I will test my headset BEFORE installing cyberon software
Ok I'm still having this problem and this is what I have tried so far:
I downgraded to XDALive v0.10 and my BT worked, but no WiFi
So I upgraded to HardSPL v6, then installed the 1.40.30.00 Radio rom, and then went back to Cingular Black 2.0, WiFi back but no BT unless headset is activated after call is initiated.
Installed Cyberon Voice Commander, didn't effect anything, still no BT
Removed Cyberon Voice Commander and re-installed MS VC 1.6 installed all the hacks and still no audio in the headset.
So it looks like it is something in the ROM that is killing the BT functionality. Maybe because the XDALive is based on a beta WM6 and the Black is based on a full version?
Some of you may have noticed that with the newest release of LVSW ROM 3.30.2.1 (2007-05-19) that the old hacks for MS VC do not work getting voice command over bt headset.
LVSW's ROM comes with Cyberon VC but the nice thing is it can be removed via remove programs so remove it and then unpair your headset and turn on/off the phone to start fresh.
1.) Install MS VC 1.6
2.) Install attached .cab
3.) In programs launch BT Voice Command Config
4.) Check enable
5.) Click save
6.) Click Exit
7.) Turn off phone
8.) Turn on phone
9.) Pair bt headset
I take no credit for this program it was done by XCSdM and later modified by ZaJules..
This works perfect for me no other tricks or reg edits zilch, nada, nothing. You might want to set voice command to button 5 though.
I'm using Elfs variant of the newest LVSW and it doesn't come with Cyberon VC and it works perfect for me.
So has it worked for anyone?
I just tried it but it doesn't work for me.
Can you give me some more info like what ROM are you using etc? What headset?
It worked for me but only after doing some changes in the registry. The path in OEM/Voicecommand was directed towards "BTVCBasic" and i had to redirect it to BTVoiceCommand. Then, it worked.
GermanGuy said:
It worked for me but only after doing some changes in the registry. The path in OEM/Voicecommand was directed towards "BTVCBasic" and i had to redirect it to BTVoiceCommand. Then, it worked.
Click to expand...
Click to collapse
Thats what was suppose to be fixed..Hmm I don't have a cab editor program so I'll have to figure something out..
MrDSL said:
Thats what was suppose to be fixed..Hmm I don't have a cab editor program so I'll have to figure something out..
Click to expand...
Click to collapse
Thank you for your help and the cab, though. I am a happy camper now with MS VC initiation working through my Bluetooth headset
Works!
VC1.6 now works thru the BT (Jawbone). Only notifications still come through the TyTN's speaker.
THANKS!
I just installed wince on a friend computer since my trial is up and checked the .cab I posted and the registry inside does set it to BTVoiceCommand.exe
So the only thing I can think of is maybe someone used the old version. I dunno but it should be correct..
ryanblace said:
VC1.6 now works thru the BT (Jawbone). Only notifications still come through the TyTN's speaker.
THANKS!
Click to expand...
Click to collapse
The notifications have never worked and its a known problem with htc and ms so who knows if a fix will ever be released..
I changed the file name in case others were using a old one or something.
Trying to get it to work on a plantronics headset and it does not work.
Changed path to point to BTVoicecommand.exe so now it does launch the program, but on the handset, not on the headset...
ygeller said:
Trying to get it to work on a plantronics headset and it does not work.
Changed path to point to BTVoicecommand.exe so now it does launch the program, but on the handset, not on the headset...
Click to expand...
Click to collapse
Delete pairing, SR, re-pair and try again. Sometimes that fixes it.
Also note that this is only for LVSW ROM 3.30.2.1 (2007-05-19)..
GermanGuy said:
It worked for me but only after doing some changes in the registry. The path in OEM/Voicecommand was directed towards "BTVCBasic" and i had to redirect it to BTVoiceCommand. Then, it worked.
Click to expand...
Click to collapse
I am also a happy camper. I had to make the same registry changes.
I got MS Voice command to work but was realy buggy on my Wizard...I installed Voice Commander over it and works so much better.
MrDSL said:
....
1.) Install MS VC 1.6
2.) Install attached .cab
3.) In programs launch BT Voice Command Config
4.) Check enable
5.) Click save
6.) Click Exit
7.) Turn off phone
8.) Turn on phone
9.) Pair bt headset
...
Click to expand...
Click to collapse
For me works half & half...
Half to the bt and half to the speaker phone...
MrDSL said:
1.) Install MS VC 1.6
2.) Install attached .cab
3.) In programs launch BT Voice Command Config
4.) Check enable
5.) Click save
6.) Click Exit
7.) Turn off phone
8.) Turn on phone
9.) Pair bt headset
Click to expand...
Click to collapse
Yup worked for me. But then it worked for me right out of the packet... but then started doing the I'm gonna ignore your BT headset thingy. This fixed it, pretty much, obviously no notifications , and I still can't persuade the button on my Motorola S9's to launch M$ VC (jus' dials last number). But otherwise, thanks.
BTW
If anyone knows how to get the phone buttom on my S9 headset to launch M$ VC then I'd be very grateful... having to press button 5 atm.
The only ROM I can get this to work on currently is Black Satin on my BT8010..
Schaps latest ROM is a no go :-(
This is working for me with the registry change to btvoicecommand.exe. But I have a strange problem (no, not THAT problem...): the first time I use VC from my bluetooth HF it works fine. If I use it again soon after that (to dial someone else, etc.), it takes 30 seconds to a minute to prompt me for the command. To get it to respond properly again, I have to soft reset, but it still only prompts me quickly once before hanging again.
I'm running Black Satin and VC 160.4622.0.
Any news on BT Notifications?
VC 1.6 on vp3g works fine over BT for me with the above steps, except the known issue with notifications over BT. Has anyone heard any news that a fix has been found for the BT notifications issue? I really hate not having them.
I have it working, all except one feature. Cross post:
http://forum.xda-developers.com/showthread.php?p=1644078#post1644078
I know it takes up a lot of memory, but I'm just toying with it until Meschle's Premier ROM comes out.
Nevermind. Got it working for those that want to try it. You have to disable XCSdM in BT Voice Command. Now everything works perfect with the BT car kit.