Develop Bugs

A2DP on BT 800- DOES IT WORK?

Hi All,
This is my first post in this incredible forum. Need to know whether the the Jabra BT 800 supports the Imate Universal A2DP Profile.
Any inputs will be most helpful.
Ciao

Hi there.
A2DP does not work on this device. i cant even get the caller names to showup on my exec. Apprantley to get this working u need a profile called remote sim access

Other question:
how should a device which only has one speaker support stereo sound?

scotjen1 said:
Hi there.
A2DP does not work on this device. i cant even get the caller names to showup on my exec. Apprantley to get this working u need a profile called remote sim access
Click to expand...
Click to collapse
You might want to try this http://www.jetwaremobile.com/index.htm it worked for me on the Jasjar and a SE Akono HBH-660.

Application audio over bluetooth?

Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans

If your car kit supports the A2DP profile for Audio over Bluetooth and you select the option to use it all the audio from TomTom will be via the car kit, check what your car kit is capable of supporting - Mike

vriesfde said:
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
Click to expand...
Click to collapse
I'm using btaudio
greetz

Thanks for the tips!
My Nokia carkit does not support A2DP, it's the old CK-7W type....
I will try the above attached btaudio once more. Previous attempts using this program were not succesful, I believe the bt hardware of the artemis was not recognized.
I remember that on my IPAQ 5550 I changed a registry setting, enabling audio over BT, but I could not find such an entry in the Artemis reg.
Keep you posted on progress, and thanks sofar!

Succes!
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!

Hi guys,
I'm a newbie here, and was pointed to your excellent forum from one of the Mods over at pocketgpsworld.com.
I am running copilot 6 on an O2-registered xda Orbit, using a scala rider headset, on my motorbike, and i need to install btaudio.cab to mt xda in order for the insturctions to be relayed to my earpiece. My question is this - whereabouts to do i need to upload the file to on my xda (obviously somewhere in the copilot files, but i'm not sure where!!) and do i need to unpack it first?
Any help or tips gratefully recieved!!
Welsh Biker

No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.

vriesfde said:
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Click to expand...
Click to collapse
Graag gedaan
Your welcome and when a call comes in it work ok

Gajet said:
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
Click to expand...
Click to collapse
That's brilliant, many thanks. I did as you said, and it is now working perfectly.
Once again, many thanks indeed
Welsh Biker

i have a orbit and i installed the btaudio cab but unfortunately it doesnt work for me. do i need to change any other setting for it to work properly? i am using a motorola hs350 headset. i am trying to use it to listen to music on my headset instead of the internal speaker. i tested tomtom6 with it and that is still being heard on the speaker and not the headset. thanks

Connect the headset to the Artemis first, then run BTAudio, switch to "on" and then minimize don't exit the program.
Have you got software that closes apps by pressing the x button or something, so that you keep switching the app off when activating tomtom etc.

how silly of me, checked settings menu, connections menu everything except the program menu!!!
Thanks a lot mate

Hi,
I seem to be having the same problem as some of the other guys. The Bt software is installed on my Orbit, I pair the phone with my car then switch the software on. At this stage the TomTom voice stops coming from the phone but doesn't come through the handfree either. If I switch the software off again the sound returns to the phone.
Is this being caused by the format of the handfree kit in my car as mentioned on the first page of this post?? How would I positively confirm the format of my handsfree kit?
Cheers
Rob.

i try to install and it works, but when i turn on audio my radio goes in mute, is possible to send the sound only when tomtom talk?

Hi all
I also need help with audio features. Is there an app that will send all audio through the head phone socket (connected to autocom on motorbike) and phone calls through bluetooth have tryed the app in this tread but it wont split it only redirects all audio?
PS sorry for the high jack of your thread just seemed a good place to ask this.

All audio to bluetooth

I had with wm5 a tool (i dont know how its called anymore) The tool routes all audio from the hermes to the bluetooth handsfree kit.
Now with wm6 (shadow) i cant get it to work anymore...
What i want is to have all the audio (Tomtom navigator, ringtone, sms tone) through bluetooth to the carkit.
i did installed a shareware apps... calles blueconnect but it always send a signal to my carkit it mutes my radio all the time!
Can someone help me please? I have already search the forum... but i cant get it to work...

yea it was a bluetooth mono through cab ..with a toggle to on or off..im looking for it also.

http://forum.xda-developers.com/showthread.php?t=266722
Searching is FUN!!!

not when ur blind

Doesnt work wel!!
I can select audio2blue then my car radio stops playing because the phone is putting a hish over the line. But worse audio from tomtom still coming over the phone speaker!
Anyone a solution!

BT Audio without A2DP Handsfree

Has anybody managed to successfully re-direct their Trinity BT audio to a non A2DP handsfree kit?
I have tried a couple of the cab's and registry hacks in other parts of the forum with no success.
Bluetooth handsfree works fine, for phone calls.
Main thing i want to do is got my voice command to use my handsfree mic, and not my phone mic....
Be nice to re-direct tomtom too, but that would just be a bonus really.

A2DP Hack
Just got this hack form my friend. & test it's OK on my Trinity... But, it's a bit tricky that only work in .mp3 format. .mwa same.

Ok, that did nothing for my phone.
Do you need to assign the application a button or something?

[REQ] Audio Stream via Bluetooth Handsfree?

Hi,
I am looking for a way to stream audio from the Touch HD to my Car. Unfortunately the cars built-in audio system doesn't support bluetooth. But there is that handsfree-thing, which works really great with calls. So I wondered, if there is a software solution that streams my music from the phone as "incoming call" to my car?
I've tried "acbToggleBT" and "BTASP" and both didn't work in the Car, but they did work with a bluetooth headset.
It would be really great if somebody knows, finds, posts, programs or has an solution.
Thanks in advance!
Greets from Bavaria, Germany
berkley

I can't remember but there was an option to route normal audio to the bluetooth handset in my HP iPAQ which is missing from HD.
Believe me music streaming to HSF device will be as good as listening to AM radio on poor reception. Go get a bluetooth A2DP profile audio headunit like Sony - MEX-BT2500 (this is the one I use and works like a charm).

Thanks for your reply.
Perhaps I took the wrong words to explain what I am looking for.
The thing I want is a piece of software that "imitates" an incoming call and sends the audio from S2P to the handsfree of my car.
Maybe this explanation is a bit better...?

[edit]
have you tried BT Audio
it's a paid app
acbToggleBT always worked for me

try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it

camro said:
try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it
Click to expand...
Click to collapse
Excellent. I can get this to work via bluetooth headset.
Unfortunatley this didn't work in my car (which is what I believe the OP wants).

http://220.232.214.116:8088/attachmentes/Day_071224/31_270270_b7dcc_pxdxa.btaudio.zip
I use this application, works terrific!!.......enjoy

ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?

binning said:
ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?
Click to expand...
Click to collapse
All i can say is this based on using it on my HD with WM 6.1 & 6.5 (Dutty ROM):
Once you install the program and then execute it (Press On):
It will transfer all Music & Audio from Movies (Core Player) etc. to my BT Nokia Headset or my BT Car Speakerphone (Motorola T305), i do not have a Radio BT set so i can't tell you, you'll just have to try.
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!

Hi Ausi, tried on my Nokia BT car handsfree but no joy
The handsfree only accepts an incoming call as stated above so some sort of emulation may be needed. Would be happy if someone knew about something...

ausi said:
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!
Click to expand...
Click to collapse
Funny... my HD does the reverse. I get de BT audio but on the BT phone I got nothing but static...

I've got a Sony Xplod bluetooth radio in my car.
When I start up it automatically connects to my HD, however it only connects as handsfree rather than both handsfree and BT stereo.
I have to go into comms manager and bluetooth settings, then select and hold on the xplod in the device list.
A menu comes up asking what I'd like to connect as, and I pick stereo, then repeat for handsfree.
Give that a go. Holding on the device to bring up the menu gives you the BT profiles the device is capable of, so with a bit of luck stereo/headphones will be an option for you.