Develop Bugs

ActiveSync via wifi is awsome, but one question remains

I managed to finally figure out how to use activesync without having to use a cradle. So far I haven't had the troubles that I have had when I used the cable and cradle. No more inactive activesync, can't synchronize errors, and having to restart activesync every few hours or so.
I managed to have activesync running for 2 days straight without any problems and restart of any sorts. This leads me to beleive that using wifi with activesync is more stable than using a usb/cradle.
My question is, can I completely abandon the USB/cradle when upgrading ROM, app installs, or anything that has to do with using the cradle and usb cables?

I don't know the answer for certain but I should think so.
What I need to know is how to sync using wifi without it trying to access GPRS instead.
Any ideas?

My 2s is configured to access wifi first (I think the setting is under the wifi config). If wifi isn't available, then it tried to access GPRS. My carrier charges an arm and a leg to use gprs, so I never configure the phone to access my carrier's GPRS. I rely on free public WIFI access and my home WIFI access to do all my internet jobs.

You'll still need the USB for ROM updates; everything else you can do over WiFi or BT.

wifi
Hi nomad,
im trying to configure my laptop wifi (peer-to-peer) and 2s. My 2s can connect to laptop wifi but the activesync is not performing connection or no connection at all. appreciate your help.
thanks.

@3waygeek, Thanks as I have not tried update anything since I pay a service to upgrade my things on my PPC. Sprite also does not like to backup via WiFi. I had to connect the PPC to the cradle.
@hoobas, I have WinXp/Sp2 installed. I have not had any problems connecting other than the occasional ActiveSync annoyance when I'm connecting with the USB cable. I'm sorry that I can't help you. I have not experience your problems so I can not give you a diagnosis.

wifi and MS Activsync
hi nomadman
can u let me know how u set up wifi to sync activesync? i have a WLAN at home and cannot see where the option is to use wifi to sync MS Activesync.
I also want to get away from having to use the cradle each time i want to sync . AT present i am doing it using infrared which is ok but like u said wifi must be better.
Also, i have two machines (a laptop and a desktop) in my wifi network. Desktop is hardwired and laptop hangs off wirelessly. How will my xda IIs know which machine to sync with?
cheers
azeem

ActiveSync starts automiatically on USB, serial, and Bluetooth connections. You'll have to use the ActiveSync link located on your PPC to connect to the PC via WiFi. This is assuming that ActiveSync does work on both your PPC and desktop. So it's best to connect to ActiveSync at least once via cradle before going ActiveSync via WiFi.
Only install ActiveSync on either your lappy or your deskop, but not on both. One limitation with ActiveSync is that you can not use more than two partnerships without some fiddling around with your PPC and your networked PC.

About Cradle ActiveSync.
Uninstall ActiveSync -> Reboot PC -> Reinstall Active Sync 3.8 and don't touch any thing or open any programs while installation is in progress.
Mine is working like a charm

nomadman said:
I managed to finally figure out how to use activesync without having to use a cradle.
Click to expand...
Click to collapse
How did you do it?
I've used the search function but I couldn't find anything about it.
Thanks,
Dino

OK, got it to work, too. Very nice
But I had to set my Network Connection from "Internet" to "Work".
Is it possible to use both settings? My Wireless LAN connects also
to the internet, so I won't switch everytime I want to sync or surf.
Dino

Re: wifi
hoobas said:
Hi nomad,
im trying to configure my laptop wifi (peer-to-peer) and 2s. My 2s can connect to laptop wifi but the activesync is not performing connection or no connection at all. appreciate your help.
thanks.
Click to expand...
Click to collapse
Hi hoobas, how do you configure your laptap wifi for peer-to-peer? (this is quite off topic ) been trying to do this for sometime. thanks

Here is a great site site that might help some of you guys out.
http://www.pocketpcfaq.com/faqs/activesync/installation.htm#Installation:

hlim,
go to settings, network connections, right click wireless connections, click properties...
tab to wireless networks, click add...
enter your ssid, and click the "ad hoc" at the lower portion of the form...
hope it helps...

hoobas said:
hlim,
go to settings, network connections, right click wireless connections, click properties...
tab to wireless networks, click add...
enter your ssid, and click the "ad hoc" at the lower portion of the form...
hope it helps...
Click to expand...
Click to collapse
Thanks a lot how about the settings on the computer side?

Re: wifi and MS Activsync
azeemakhtar said:
hi nomadman
can u let me know how u set up wifi to sync activesync? i have a WLAN at home and cannot see where the option is to use wifi to sync MS Activesync.
I also want to get away from having to use the cradle each time i want to sync . AT present i am doing it using infrared which is ok but like u said wifi must be better.
Also, i have two machines (a laptop and a desktop) in my wifi network. Desktop is hardwired and laptop hangs off wirelessly. How will my xda IIs know which machine to sync with?
cheers
azeem
Click to expand...
Click to collapse
In the network settings of yr phone, enter the ip address of machine you want to sync with as WINS server. That will tell yr phone which machine it has to connect to. You can set up peak and offpeak timings in the mobile schedule of activsync on ye PDA, so that it can sync every 10 or 15 mins .

Sorry if my question is too noobish. I have read so many articles talking about establishing wifi sync between a wifi enabled PPC and a wifi enabled PC, but havent been able to do yet. Do i have to have another software to enable the connection ?
Can any one please explain slowly and in detail how you could do that, i've been searching for quite a long time but still no result. And 1 more question is that after i can sync through wifi between my O22s and my laptop, does it affect the wifi connection of my laptop and my O22s? A bit silly right but i'm a new user and i'm not in IT field also. Thanks for any suggestion from you guys.

@azeemakhtar,
http://www.pocketpcfaq.com/faqs/multiplepartnerships.htm
@ducga,
1. Install ActiveSync 3.8 on your lappy or PC, but not on both.
2. connect to activesync via cradle first.
3. remove unit from the cradle and reset.
4. click on the ActiveSync link on your PPC and tap on the Sync button.
* The above procedure should be able to get activesync working via wifi as long as there isn't a setting problem in your router managment or firewall.
* The above precedure should work if your are able to connect to the interent on your PPC via wifi.

nomadman said:
1. Install ActiveSync 3.8 on your lappy or PC, but not on both.
2. connect to activesync via cradle first.
3. remove unit from the cradle and reset.
4. click on the ActiveSync link on your PPC and tap on the Sync button.
Click to expand...
Click to collapse
I also have to do the following:
3a. Click Start / settings / connections / Network cards
3b. Select Network Adapters
3c. Change 'My network card connects to' from 'The Internet' change to 'Work'
3d. Close, reset (for luck)
3e. Open ActiveSync on your desktop PC, select File / connection settings / and tick allow Network Ethernet !!
4. Now when you click on the ActiveSync link on your PPC and tap on the Sync button - it won't try to use GPRS to connect and WiFi will be listed as your Work connection.
I always have to change my network card settings back to 'The Internet' before I can browse again.
Rich

Re: wifi and MS Activsync
azeemakhtar said:
i have two machines (a laptop and a desktop) in my wifi network. Desktop is hardwired and laptop hangs off wirelessly. How will my xda IIs know which machine to sync with?
Click to expand...
Click to collapse
Go to ActiveSync on your XDA, click tools, options.
It will say "When syncing remotely with a PC Use this PC:"
It should list the network name of the PC you currently have a partnership with. i.e. "TOMSLAPTOP"
Rich

help with XdaExec local network

please help ... I've just managed to establish a wireless local network between the xdaExec and a Vaio laptop through their WiFi adaptors (the laptop is connected to a fast broadband line through ethernet).
All I want is to be able to surf the Net on the xdaexec from another room of my flat (I don't own a wireless router and the connection between the laptop and the xda is in the "ad-hoc" mode).
At the moment I can't open any websites from the xda ... any ideas ??... (I attach the relevant screenshot) Do I need to go out and buy a wireless router ?? (there must be a way to do it without one I hope...)

you could try (assuming the Vaio is winXP) using terminal services to connect to your laptop then surf the net on that via the XDA.
You need to enable remote access on the laptop, (right click my computer go to properties, click remote tab and tick the box) set up a username and password for your account on the laptop.
Then open Terminal services on the XDA and enter the Local IP address of the laptop.
This isn't really the correct way of browsing with your XDA but it is an alternative, and cool when you show people how you can control your laptop from your phone!!
HTH

if using winXP:
bridge your ethernet and wifi connections using network connections and make sure that the "allow people to connect throught this connection" (or something like that) box is ticked
not winXP:
no idea sorry

oh damn why don't u simly buy a wlan router? its not that expensive... and its easier and more secure too.

WIFI_Connected but can't suf internet.

Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.

simontee said:
Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.
Click to expand...
Click to collapse
It is a PC connection problem
Try to enable PC internet sharing

simontee said:
Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.
Click to expand...
Click to collapse
Chek the settings your wi-fi card connect to Internet or to Workplace

....
Thanks for all the advise but my problem still not resolved yet.... not too sure whether is my home WIFI+router setting or my P800W setting problem.... this really getting to my nerve !!!
1. I can connect to my home WIFI and able to surf internet with my laptop.
2. I can connect to my home WIFI and able to surf internet with my old pda MITAC 558.
3. When i use my p800w... can connect to my home WIFI but cannot surf the internet. The weird part... managed to surf the internet few times... and then cannot surf again/..
Please help !!

I'm facing same problem also..
I can connect to Wifi, but when try to open website, using IE
is stuck on LOCATING....

WiFi Issues
I have exactly the same issues and have tried installing both Opera and Netfront to no avail. I can connect to Wifi perfectly can then sync Avantgo, download quick GPS updates and surf a couple of pages, then the DNS seems to fail, have tried with DHCP and fixed IP's. Think the o2 Orbit has some sort of DNS cache fault...As a side issue when the Orbit does connect it runs the Internet very slowly...Both a XDA IIi and XDAs run perfectly on the same wireless!!
Get the devices early and wait for the fixes!!

the same thing on Artemis - device gets IP from WiFi Access point by DHCP, but without DNS. I set DNS manually and Internet is working thought WiFi now.

I had the same problem then installed Wi-Fi Companion, issue resolved. You can download a trial for three days from Pocketgear or Handango.

I changed the wireless mode of the router to only wifi g

has anyone any idea how to get round this yet?
Tried to connect today and all that happens is ie sits there saying 'locating'
I tried Wifi companion..it shows me connected and everything but still can't surf the net.
how can I set DNS manually? might be worth a try
thanks for any help
quick update...Ive just been doig a tracert and ping of my service provider and although the trace and ping come out ok...i.e. still just sits there saying locating...
anyone any ideas?? getting desperate here
Apologies..another quick update....
it's not that I can't connect to the net..it's that there is a default page on IE that tries to connect to pda.o2.co.uk or something..and this page is either not there or something...so, changed the default page and I'm good to go...
apologies again

Mine did the same ... Heres the fix ... It has trouble locating the home page . Type in manually to the address line the url for say GOOGLE and wait for it to connect . Then go to tools options and save current page ( Google) as home page and hey presto ! Sorted

Hi
I also have a similar problem
I have a 802.11b broadband router (linksys) which works fine with my two wifi PC's and my Wifi XDA Exec to access the Internet and collect e-mail
I just got an XDA Orbit and although it "sees" and connects to the Broadband router it will NOT allow access to the internet or e-mail (apart from one very short half page of ntlworld.com home page on one occasion)
WORST than that , when I use the XDA Orbit with Wifi and Internet Explorer - it HANGS the wi-fi router after about 30 secs and I have to reset it before I can access the Internet from any other PC's !!
What am I doing WRONG ???
Any suggestions welcomed
I tried the above 'fixes' and it DID get me a BIT further
i.e. I was able to get a connection to google.co.uk for about 30 seconds and do one enquiry - but then it STILL hung the router and the XDA Orbit was stuck saying 'locating'

Take a look here this worked for me.

Sorry did not work for me - after 30-40 seconds of surfing IE hangs on 'locating' and the router hangs and has to be re-set
ANYTHING TO DO WITH 802.11b compatibility ????????
Where can I get Opera browser to try that ?
How many posters have fixed this problem ?

OK
I downloaded the latest trial version of OPERA and tested that
EXACTLY the same result
If I switch on WiFi and connect to the Internet via Opera, I can access the internet for about 30 seconds, then the browser cannot access any more
If I switch of WiFi on the Orbit quickly, then the Router is OK - if I don't, then the Router Hangs and all my computers lose internet access
Has anyone else seen this ??
Has anyone cured this ??
Is is an 802.11b problem ??

How can I share my 3G with wifi?

Can some one tell me how to share my 3G connection over wifi? I need to make the phone as a portable access point.

no can do.
Bluetooth or USB

Try hitchhiker it's free! but I'm not sure if it works for sharing using 3G... try it and let me know http://www.kasuei.com/hitchhiker/

No, It doesn't support to share the 3G connection.

So use Internet sharing over BT ?

Would like to use it as a wireless access point, so I can get access from computer and iPhone, seem like I have hard time to find a solution.

share the connection with the PC by USB. Put a wifi stick/pcicard in the PC and bridge the connections, then the iFoon can have 3G too

Maarten_NL said:
share the connection with the PC by USB. Put a wifi stick/pcicard in the PC and bridge the connections, then the iFoon can have 3G too
Click to expand...
Click to collapse
you got this to work?
or are you saying it should work?
i have tried to share a connection this way but have had no luck when using internet connection sharing/pan.
i did get it to work this way back in the day when the phone ran wm5 and had dun.
do you have any pointers on how to get internet connection sharing in wm6 to let more than one device connect to the 3g connection?

acem77 said:
you got this to work?
or are you saying it should work?
i have tried to share a connection this way but have had no luck when using internet connection sharing/pan.
i did get it to work this way back in the day when the phone ran wm5 and had dun.
do you have any pointers on how to get internet connection sharing in wm6 to let more than one device connect to the 3g connection?
Click to expand...
Click to collapse
seems like you may need an app on your pc to manage/route the connections not sure if this helps but you can try "network Magic" it give you a bit more options on the pc side for managing connections. would like to see where this goes for possible future applications. i'll give it a try when i have some free time and check with an comp tek friend of mine see what he thinks.

Yeah it sucks that no one has created a way to share the wifi connection just like we share bluetooth or usb.
We also need a proxy server that we can run on our phone.

ok, for me the boring part is the time of the connection, you can share via wifi by just turning on your internet sharing in whatever the pc connection, you just need to manually deffine your hermes wifi to 192.168.0.1 and it shares via internet sharing! The question here is that the connections stops after 10 minutes becouse of the warnig "check usb cable connection". Its very irritating to have to start connection every 10 min. !!!!!

awww...iPhones not fast enough Data-Wise for ya?
thought it was supposed to "revolutionize PDA Phones"
hah.
sorry, i had to add my 2¢ against Apple.

Beware, some mobile provider allready use NAT, thus you'll recieve a non-routable IP. I am not sure that you will be able to share a connection of this kind.

share intenet TO my HD through USB and Activesync?

HI
I'm trying to share internet using the USB cable and activesync, I already configured my internet connection to share it with the new "local area connection" created when the HD is plugged in, but it doesn't work!
and by the way my computer has an IP:192.168.1.X, but the local area connection has an IP:192.168.2.X
really I even don't know if this is possible, but I did it with my old palm then I thought it can be possible.
thanks!

Using usb or bluetooth with activesync will share in automatic the PC internet connection without the need to set internet connection sharing on the pc

koji_nanami said:
Using usb or bluetooth with activesync will share in automatic the PC internet connection without the need to set internet connection sharing on the pc
Click to expand...
Click to collapse
Either with OR without my HD can't see the internet connection on PC with active sync over USB.

Huh
I just plug my HTC Touch HD into the usb port and select "Internet sharing" and it comes up straight away, even works from scratch on windows 7 cos i tested it!