Hi there doe's anyone no why my xda11s keeps hard resetting every couple days as its doin my ed in keep setting it back up have had it for 6months'software ver is windows mobile 2003 se version 4.21,1088 (build 15045.2.6.0) only use it as fone most the time & tomtom5 sd card 512 and use bluetooth handset for driving, hope this helps as im takin it back to o2 if not as forums can help most the time & its quicker
Hi,
My blueangel did hard reset few times when I was using O2 ROM ( with 4.21.1088 CE ).
Therefore I switched back to T-Mobile ROM (also 4.21.1088) and the problem was solved.
I understand, that You purchased your Bluangel as "O2 brand". Therefore You may not want to use other ROM than O2's.
You can alway try to use some older O2 ROM.
But I recommend You to take T-Mobile ROM, and customize it (to get rid of T-MOB customizations).
You can always revert to original O2 ROM if you need to return your device (to keep warranty intact).
Good luck
Once arrived to 100% it disconnects the activesync and the screen on the p3300 appears black as it says in the manual. Then I can't make the connection again so I can't transfer the ROM. Can anyone help me?
I have tried a lot of times and read a lot, I have also updated actvesync from 4.2 to 4.5, but still the same.
Thanks,
Without disconnecting run USPL again and see if it helps. If not reset your device and look and see what the SPL version is. If it is 1.11.0000 then it has worked and you can flash the new ROM.
I had the same problem with my P3300 and I found a solution under Windows Vista on this forum (you can find the link in the wiki xda)
http://www.forummobiles.com/index.php?showtopic=139079&st=0&p=1399080&#entry1399080
The only thing, is that's in french...
Maybe you will find some equivalent thing under XP. The tip is to upgrade the driver of the mobile device once USPL is loaded 100%.
I hope this will help.
planagan said:
Once arrived to 100% it disconnects the activesync and the screen on the p3300 appears black as it says in the manual. Then I can't make the connection again so I can't transfer the ROM. Can anyone help me?
Click to expand...
Click to collapse
Seems perfectly normal to me... I think you are not patient enough. It can take quite some time, whatever you do, don't disconnect the usb cable, sit on your hands and watch the phone resets itself. After that a new ActiveSync connection is made, then you can start with the ROM update.
It can also help to disable your AntiVirus and firewall software temporarily, during the flash sequence.
Had this problem too. killed the firewall what worked for me!
Had this problem too. If you are trying to install a cooked ROM run first "clear storage" program (settings/system)
have installed an i phone them on my xda orbit, and have also messed with sdhc patch trying to get an 8gb memory card to work in it. alos is ok but now the wifi option in connections menu and als the wifi button the comes up on the today screen have gone!!!! it runs wm5 can any one help thanks
are you running the manufactors ROM or an extended ROM.
If it is an Extended ROM then you will be able to use the Advanced Settings in there to change the Comm Manager settings to re-add the WiFi Connection in there.
Other than that i do not know. It may be worth upgrading to one of the WM 6.1 ROMs on here http://forum.xda-developers.com/forumdisplay.php?f=362
If you decided to upgrade make sure you have had the phone CID unlocked or it may not work and you will brick your device.
Check out all the info on the link before deciding
Cheers Dave
is it even possible to brick your ****ing wifi!?!?
im going to reload an original HTC rom...flashing a different radio did nothing
ph03nix said:
is it even possible to brick your ****ing wifi!?!?
im going to reload an original HTC rom...flashing a different radio did nothing
Click to expand...
Click to collapse
Hmm no, restart your router, edit, what's your hermes, dopod? jasjam? 8525?
nope, many other devices can connect to wifi fine (even wizard)
mine is HTC hermes, not branded
im currently putting the earliest version original rom back on
the wifi was working fine when i got the phone, now its screwed
it cant be the radio either, because cell was still working perfect
i am very
my wizard survived multiple rom updates/radio updates/blows to the head and never had any problems
ph03nix said:
nope, many other devices can connect to wifi fine (even wizard)
mine is HTC hermes, not branded
im currently putting the earliest version original rom back on
the wifi was working fine when i got the phone, now its screwed
it cant be the radio either, because cell was still working perfect
i am very
my wizard survived multiple rom updates/radio updates/blows to the head and never had any problems
Click to expand...
Click to collapse
You'll be surprised what a restart to the router can do, have you done that yet?
lol yes i have
lol
now my device is completely bricked
still saying spl 2.10.olipro after original rom flash
i believe i can unbrick
ph03nix said:
lol yes i have
lol
now my device is completely bricked
still saying spl 2.10.olipro after original rom flash
i believe i can unbrick
Click to expand...
Click to collapse
Well good luck with that, it will say 2.1 even after original rom. Read mrvanx guide on my signature for downgrading spl.
i will either unbrick with sd card or hammer
its choice
only thing im worried is after unbrick will wifi work
edit: just unbricked radio, rom loads now
WAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
i fixed it!?
i put radio 1.47.30.10 on instead of the 1.5x
umm....i guess i will try a rom that didnt involve ****ing up my wifi and see what happens.....im definately not touching my radio anymore though
hmm now i can officially say WTF
my wifi worked just fine with the original WM5 and the updated radio
now with CRC's rom (i thought PDAViet's was the problem) my wifi no longer works
any ideas? its kinda strange to me two roms dont work with wifi
i should try one from a diffrent WM build
ph03nix said:
hmm now i can officially say WTF
my wifi worked just fine with the original WM5 and the updated radio
now with CRC's rom (i thought PDAViet's was the problem) my wifi no longer works
any ideas? its kinda strange to me two roms dont work with wifi
i should try one from a diffrent WM build
Click to expand...
Click to collapse
I think you are doing something wrong, if wifi works, it works, no matter what ROM, I have used CRC and PDAViet's 19900 build before, and it works fine. Radio only up/down the signal strength to your carrier.
how is that possible?
the original WM 5 i just connected and it worked perfect, i tested IE and everything
just flashed CRC's rom, and now wifi doesnt work at all again
please tell me what possibly could be wrong
it gives me the error 'Cannot connect to the network. Check your network and service provider settings and try again.'
it was just working perfect before
ph03nix said:
how is that possible?
the original WM 5 i just connected and it worked perfect, i tested IE and everything
just flashed CRC's rom, and now wifi doesnt work at all again
please tell me what possibly could be wrong
it gives me the error 'Cannot connect to the network. Check your network and service provider settings and try again.'
it was just working perfect before
Click to expand...
Click to collapse
Have you run HTC connection wizard/checked your wifi settings? Do you have your router set to only accept some mac addressee's? Do you use DHCP or give each device static IP's? Do you have a WAP/WEP get, if so, did you put it in correctly?
Never had any wifi problems with my hermes, now, Blueangel, you where lucky if it would turn on
yep everything, i turned off everything and completely unsecured my network
im going to try an older WM build and see if this fixes the problem
in Wireless LAN it seems the connection establishes ok, then it just cuts me off and said it cant connect to the network
like i said, WM5 just connected on its own perfectly ok
k... im going to try one more thing and thats it
k my wifi will only work with WM5 and will sometimes require a soft reset if power is turned off while its running on WM6
doesnt work at all on 6.1 either
but WM5 it works fine
any suggestions?
k well im gonna figure this out either way
im taking the official wm6 rom (os only) from htc and see if it works
if it doesnt, im gonna pull the wm5 official rom, and if that works, im going to be
ph03nix said:
k my wifi will only work with WM5 and will sometimes require a soft reset if power is turned off while its running on WM6
doesnt work at all on 6.1 either
but WM5 it works fine
any suggestions?
Click to expand...
Click to collapse
Sounds like you might have dodgy radio hardware, everything else connects okey? To the wifi that is, and have you tried another wifi network?
HTC's 3.35.255.1 Pre-Release works ****ing fine
yes, everything else works (as well as on all other roms)
i even tried Schapps WM6 rom, wifi doesnt work
the HTC release i have now is WM6 too and has no wifi problems
i really dont know, but iv had enough of this for one night
ill deal with this tommorow, the official release is working fine
hmmm iv been doing some reading
i read http://groups.google.com/group/micr...ireless/browse_thread/thread/fa20e23f074a391b
it didnt fix my problem, however, when i use a static IP address in settings, it seems to connect and establish a connection fine, it just wont work with it
when i dont enter the settings, it screws up and disconnects
anyways i think this problem is solvable, im just going to have to figure out how
edit: yes i put a non-working wifi rom back on, if it works in offical roms, then it has to work in 6.1 roms somehow....
well i've bought a htc s620 on ebay and it has windows mobile 6 standard beta on it. CE OS 5.2.1215. i've tried installing wm 6.1 by kavana on it but at 3% it just exits and said image is corrupt but that very same image worked on a BT s620. i've tried application unlock on the s620 and it says "phone is not unlockable". what can i do to remove the beta version and install 6.1? btw i've to set a wrong date to be able to use the beta version else it will lock the phone and i won't be able to use it
please read the noob guide, use the search and your answer will be found, this has been covered so many times....
i've read everything tried everything but that **** refuses to update. i've tried a lot of roms but everytime i get " image corrupted" whilst the same roms work on another s620. i've tried to application unlock it but i get "phone is not unlockable". help please
Go to NRG Rose ROM 1.7 Remade in sig and check out the how to flash.