hi Guys,
I have upgraded my T-mobile vario 2 to wm6 from wm5.I have noticed that there is no incomming port but it is in wm5. So what happens as you know that any bluetooth handsfree set I try I can only make calls but cannot receive calls on my bluetooth.
I have searched the forums for this but no luck.
Any Ideas?
Regards
Related
Has anyone a good working combination of the TyTN and the Parrot CK3100 carkit?
I'm using the latest firmware v 4.15 but have many problems like BT switching off in the TyTN settings, no voice communication possible after answering the call, syncing of contacts troublesome...
I was using a S100 before without any problems.
pbw
Hi all!
After spending about 45 minutes searching through the various threads, and educating myself with all the VC1.6 issues, I am left with one question:
On a WM6 8525, with NO bluetooth headset (Just straight ahead through the PocketPC speakers)....
...has anyone got it to announce incoming calls and appointments?
Many of the other threads discuss issues with the Bluetooth headset.
I don't have a BT headset, so I am just concerned with incoming calls.
Is there a fix for this (registry hack or otherwise), or must we wait for a patch from MSFT?
Thanks guys!
Mike
Michael_514 said:
...has anyone got it to announce incoming calls and appointments?
Click to expand...
Click to collapse
With WM6 announcement of incoming calls does not work. It is an issue with WM6.
um thats not true. its a issue with the hermes/tytn.. it works fine on my wiza200 but refuses to work on my hermes
My 8525
Well with my 8525 WITH my bt headset it still announces everything, just thru the phone speaker(even though I have it checked to only do it thru bt headset). So I think that it will announce them over your phone for you.
Michael_514 said:
Hi all!
After spending about 45 minutes searching through the various threads, and educating myself with all the VC1.6 issues, I am left with one question:
On a WM6 8525, with NO bluetooth headset (Just straight ahead through the PocketPC speakers)....
...has anyone got it to announce incoming calls and appointments?
Many of the other threads discuss issues with the Bluetooth headset.
I don't have a BT headset, so I am just concerned with incoming calls and calendar annoucements.
Is there a fix for this (registry hack or otherwise), or must we wait for a patch from MSFT?
Thanks guys!
Mike
Click to expand...
Click to collapse
Calendar announcements works fine. Haven't set up incoming calls cause i would rather look at the screen for those and use caller id.
Mark
Thanks for the clarification, Mark.
I stand corrected.
I just set up a test appointment and indeed it announced it.
On the other hand, no luck with incoming calls through the PPC speakers.
I guess its confirmed, then. No luck with an 8525 and VC 1.6.
We shall await a patch or a new build!
Thanks!
Mike
On my 8525 with WM6...
Caller ID announces just fine through built in speakers.
All announcements and calendar warnings announce through built-in speakers.
In short, no issues through built-in speakers.
Via bluetooth, things get spotty. I have the phone set to only announce through built-in.
As always, your mileage may vary, but mine works fine.
Michael_514 said:
Hi all!
After spending about 45 minutes searching through the various threads, and educating myself with all the VC1.6 issues, I am left with one question:
On a WM6 8525, with NO bluetooth headset (Just straight ahead through the PocketPC speakers)....
...has anyone got it to announce incoming calls and appointments?
Many of the other threads discuss issues with the Bluetooth headset.
I don't have a BT headset, so I am just concerned with incoming calls.
Is there a fix for this (registry hack or otherwise), or must we wait for a patch from MSFT?
Thanks guys!
Mike
Click to expand...
Click to collapse
Yes, it works on the [faria] version, it start with the normal ring and then lowers the volume and play the contacts name(you must enable from settings).
it does not work with lvsw ver or v3pg ver..
jacob-mda said:
it does not work with lvsw ver or v3pg ver..
Click to expand...
Click to collapse
I can confirm this. It also does not work the the Cingy WM5 Rom. It did work with faria.
doesnt work on black or custel's either.. seems to only be working on farias so far..
edited..wrong info
Is Faria's WM6 still the only one?
Any of the recent WM6 roms get the incoming call announcements to work?
vc 1.6 works just fine on my 8525. after configuring it, it announces incoming calls.
i am currently running vp3g's 3.62 ROM.
There is a version of VC 1.6 on this forum I think that does annouce incoming caller. It works for me on Schap 3.60a whereas the previous on of 1.6 I tried did not. The problem with this one was that it didn't allow me to control with my Jawbone anymore.
Recently installed new HTC WM6 Rom and all is sweetness and light......except.......When I accept an incoming call on the Bluetooth Motorola HF850, the first 6 -8 seconds are handled by the Orbit and then the bluetooth kicks in - trouble is the caller has hung up by then!
Tried deleting pairing and reinstalling....anyone with ideas?? Thanks.
Hi all,
I am facing the same problem with my Motorola car kit. Very annoying. I can receive calls and after 6-8 secs they can hear me, but I can not make a call, only mutes sound on both the headset and car kit. I have to select "Turn Off Handsfree" to get it to work... HELPPLEASEE!!!!!
Same exact problem here with Hermes - any ideas anybody?
The solution...
Try jetwaremobile.com - it worked for me on Moto and Siemens HF devices... free trial to see if it works...
I have a partial solution:
I answer the phone on the PDA unit, not on the BT unit, and then I click the blue button on the BT car kit and the phone immidiately connects.
This connects much faster than the usual 10 seconds wait if you answer with your Car Kit button.
TangerineTractor said:
Try jetwaremobile.com - it worked for me on Moto and Siemens HF devices... free trial to see if it works...
Click to expand...
Click to collapse
Hi, this is my first post. I've the same problem with my vario ii (T-mobile) recently upgraded to WM6. Installed the program from jetware and the same problem still persists. Funny enough, it did fix the problem with voice speed dialer.
I've been talking to motorola about their hf850 and they don't have a clue. I used and old MDA Compact II with WM5 and that worked fine with the car kit. I downgraded to WM5 on my Vario II and since this morning my HF850 carkit has been woking as I would expect it to. I definitely think that the problem is with bluetooth on WM6.
I have the same problem with my HTC Tornado (Cingular 2125) with WM6.
Same problem here with Trinity & WM6 - maybe this is a Microsoft/Bluetooth stack problem... any other ideas?
Hi all, First of all I'd like to say this is the most informative forum I have been involved with . Up till now I haven't needed to post any questions.
Now....
I have an i-mate Jasjam herm200 (purchaced from Telstra). Until recently I was running WM5 which it was shipped with. Apart from the slow speed of the PPC (due in part to the Telstra Bloatware) it ran fine.
Since then I have tried many cooked ROMS inc. all Jasjamming's WM black editions, Most of Schaps WM6 and a few others, and I'm having problems with connecting my HS850 headset & my Altina GBT709 GPS receiver.
The Headset,
After pairing the headset I found that when making or receiving a call the person on the other end can only hear me for a few seconds but I don't hear anything, then when the headset Icon appears on the screen the call remains active but I can't hear the other person & they can't hear me.
I reflashed the Telstra Jasjam shipped WM5 rom: 1.31.305.2_106_6275_1.38.30.10_108_ship and the headset stilled didn't work , reflashed it with the same rom again (various WM6 roms in between) and it will work fine.
Can someone tell me if the problem is with the HS850 or the WM6 upgrade?
The GPS,
Since I have started flashing different roms I have never been able to connect the Altina 709 to TomTom Navigator 6, even when reflashed with the shipped rom. I cannot figure out if the problem is with the Bluetoth or a configuration issue with my PPC.
I can live without the GPS as I have a stand alone TT GO 500, but not being able to connect the bluetooth headset properly is driving me NUTS!!!
Please Please Please can someone help me figure this out.
Squirt
Any ideas people?
Don't know if this helps,but I found the Telstra customisations that you can install give me grief with my parrot car bluetooth system - they mess with the bluetooth stack in some way. I found the Telstra WM5 rom didn't play nicely either, which was my main incentive to upgrade to WM6. Are you using a clean install of the WM6 roms without tacking any of the telstra stuff on top?
I eventually found a .cab with just the proxy manager which is all I needed, and schap's roms work nicely for me regarding bluetooth, so I'm a bit wary of fiddling with it now.... I know the black series (and a few others that must have used the same build) had bluetooth issues for me.
Thanks for your reply, I'm currently running Black 3.0.1 which has been the closest I've got to getting the BT H/Free working.
With 3.0.1 I can hear the person on the other end through the phone speaker not the BT, BUT, They can hear me through the BT headset........strange.
I'm just waiting to catch up with a bloke from work with a different brand BT Headset to see if it makes a difference.
Hello all,
I bought the mirror handsfree MHF-R220BT yesterday but have some problems with it. I installed the mirror en paired to my artemis device, no problem so far.
I also can make call's, but when I want to receive an incomming call I cann't answer the call. Someone else has the same problems? Or someone has any ideas to try to get this handsfree set working.
Thanks for any ideas.