Related
I have upgraded my MDA PRO with the recent TMobile UK firmware:
ROM 1.20.32WWE
ExtROM 1.20.120WWE
Radio: 1.06.00
I can use my Parrot CK 3100 with it, but my contacts are not synchronized.
Has anyone figured-out how to do it?
Many thanks.
Can't be done automatically (confirmed by Parrot)
You will have to select them one-by-one and then beam to the ck3100
OR: Using PocketInformant which allows you to select all contacts (or a subset) and beam them just with one click.
I have upgraded the Parrot firmware from 1.13 to 1.14b (they mention this release has better synchronization for PDA's with WM5) and ... guess what?
I WORKED!!! My contacts were automatically synchronized!
I repeat: I didn't have to send them one by one nor use Pocket Informant! It worked automatically!
Great!
Well, I have now my contacts synchronized, but after a few days of driving I realize my Bluetooth connection is not stable. My Parrot Partnership is regularly erased after a while.
Is there a Bluetooth patch a have to install? Do I have to upgrade my radio to 1.09, maybe?
Thanks for your help.
How can i disabled Sync ?¿?
Regards
I have the XDA Exec
ROM Version 1.30.107
Radio Version 1.09.00
ExtROM Version 1.30.162 WWE
I too have the probelem of the pairning regularly disapearing - how many others have this problem with the CK3100
I have updated to the latest 14b Flash for the parrot but this does not help.
Im assuming its an XDA Exec issue - does anyone know if O2 will be releasing a new rom with more stable bluetooth in the near future
I have XDA EXEC with latest i-mate ROM (1.30.76 with 1.09.00 radio) and my Parrot synchronizes everything (even the calls registering). No problem with bluetooth (using latest 4.14b).
I installed JetWARE (http://www.jetwaremobile.com/index.htm) and CK3100 gives me also the battery status, the network signal strength and Network name.
The only problem I now have is that I can't use XDA voice dial (using voice command) when I presse CK3100 to make voice dial. It says "connection failure to recogning system". Can someone help me to put this working?
I also have a CK3100 and can sync my contacts, but I seem to loose BT connection every other time I use it.
It seems the Jasjar turns off BT or it just does not show up. I need to go into BT manager and renable BT on the JJ or select the CK3100 and set it as the hands free.
It seems to be different problems, and it is really annoying me.
I am running the CK3100 v14 BIOS and the 1.09 Radio, I might try the 1.11 radio.
parrot3100
I have the same problem. It looks like a program is causing a memory leak or something like that.
RadioROM 1.11.00 is worse (in my case) then v1.09.00. At this moment I have started to rule out installed applications.
I am no shure whether this is caused bij the Parrot since my BT GPS receiver has identical problems.
mda pro loose BT connection with ck3100
Gadget_Junkie said:
I also have a CK3100 and can sync my contacts, but I seem to loose BT connection every other time I use it. ...
Click to expand...
Click to collapse
I have updated my mda pro with the dutch t-mobile rom 1.30.233 WWE. Since that time is sync-contacts working on my ck3100. But I loose BT connection every time I'm using the parrot. I've updated the ck3100-firmware from 4.11 to the newst one version 4.15. Who can resolve the problem.
And how can i stop the automatic sync of the contacts, every time?
Tnx, Lucas
I have exact the same problem with my mda-pro, every time the paring and connection is lost.
Losing BT connection
lkwq said:
... I loose BT connection every time I'm using the parrot. I've updated the ck3100-firmware from 4.11 to the newst one version 4.15. ...
Click to expand...
Click to collapse
Updating the firmware to 4.15b do not solve the problem. Still losing BT connection. Had to wait to 4.16, Parrot said.
parrot.biz said:
... The Next firmware which is 4.16 will be released in a few weeks.
What you can do is :
- Pair your phone using the menu SETTINGS/ADV. SETTINGS/PAIR WITH PHONE/SE
K600,K750 No Sync
- Connect your phone to the CK3100 carkit.
- On the kit, Enable SETTINGS/ADV SETTINGS/OBJECT PUSH/D500, My-X8.
- From Outlook, select the contacts you want to send to your kit.
- Select FILE->SEND VIA BLUETOOTH->Other, Wait for the kit to be detected
by the computer.
- Enter the Pin CODE 1234 when asked, the contact is sent...
Click to expand...
Click to collapse
I hope it works.
Lucas
BT connection problems
The solution is to connect the htc universal with the Parrot ck3100 on this way:
-Pair your phone using the menu SETTINGS/ADV. SETTINGS/PAIR WITH PHONE/SE K600,K750 No Sync.
-Connect your phone to the CK3100 carkit. Code is 1234.
Click to expand...
Click to collapse
Then remains the connection in position.
You can beam your contacts to the Parrot, one by one. Not all your contacts, but only the contacts you need on your Parrot. And no /H/W/M, of course.
So, it all works. Success!
Lucas
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
which WM6 ROM are you using?
I had this problem with my Audi A4 car phone. The ROM versions using build Build 17745.0.2.3 were not good for that. Now, I'm using the Black Majik ROM and that works like a dream for the BT connections.
walshieau said:
which WM6 ROM are you using?
Click to expand...
Click to collapse
I have Cingular HTC 8525 [HERM100]
ROM Version: 3.30.2.1
ROM Date: 04/17/07
Radio version: 1.41.00.10
Protocol Version: 32.74.7020.18H
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
Did you manage to solve this? Is so how?
Thanks
Msuk
i started having the same problems but i noticed it after i installed the voice command.. the rom that i use is the gm360 gold. the problem ive got was whenever i was in a phone call using my blutooth and i received a text message it would deactivate my headset. if ur having somewhat of the same problem try disabling ur voice command software...
Multiple AT&T/HTC WM6 ROMs?
My 8525 with the WM6 ROM can no longer route the audio to the BT headset (a Moto HS850 - but this is irrelevant, I suspect).
Basic BT headset usage was fine with WM5 (excepting the known issues with VoiceCommand).
I thought that perhaps the issue was related to the various little registry tweaks and sw patches. However, I had to do a reflash (for other reasons) and currently have just the default WM6, no registry tweaks, no BT sw patches, and MS VoiceCommand 1.6 installed (but set to NOT use the BT headset).
Pairing works fine. So does activation recognition (i.e. the little headset appears in the notification area when I open the boom on the headset and I can hear the background establishment of the BT channel). But audio (dialing tones and Connected call audio) do not reach the headset. The audio also doesn't go to the phone's speaker.
So, are the official ROM updates that repair this? Or, is the cost of going to WM6 the abandonment of BT headsets?
By the way, VoiceCommand 1.6 works fine--if I tell it to stay away from the BT headset.
Pays WM6 Roms
I had the same BT disconnecting problems with my original german Vodafone WM5 and also still have them with Pays WM6 ROMs (2.02 - 2.15) in my Audi A6 MMI.
With the original german HTC WM6 ROM BT worked very well.
Everything else on Pays ROMs is really great. He´s doing great jobs.
Any idea?
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
ai6908 said:
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
Click to expand...
Click to collapse
Come On, experts on the XDA portal, no solution?? noooo way!!??
My friend had the same issue with an tytn2 and last schap's rom in french language.
After an hard reset i get BT work fine with his OPEL.
But before i made lot of test desinstalling soft check registery key with no result. I still do know why BT was disconecting woth no reason.
Cheers.
Audi Bluetooth hands free
I had the same problems in wm6 with some roms.
I use the official HTC TyTn wm6 with excelents results, also Schaps 4.31 work very good (No disconection at all).
Now I am using Pay WWE 4.30 with many disconections.
BTW I have the audi TT bluetooth option.
On my 8525 Hermes I use the latest Pays Rom and it was disconnecting all the time (Parrot BT) - BUT then I decided to TURN OFF THE WAN and it improved greatly. Other thing I noticed is that the Hermes has to be in DIRECT LINE OF SITE of the BT device at all times or it is erratic.
BT
It seems there are differences in the WM6 versions. As said earlier in this thread for me original HTC and Schaps WM6 ROM versions are running without any BT disconnections.
Tried several WM6.1 versions now and every single one is working fine with my Audi MMI.
Similar problems handing BT control between applications
Hi all, I've been experiencing similar problems since changing ROMs. Originally with Schaps 3.60a I was able to make a call whilst listening to music all using my BT headphones. The Call would pause the music & resume afterward. It worked great! However since changing to Schaps 4.0, 4.2 & now CRC's PHKv12r9, I've never had the same. On a couple of rare occasions it has all worked fine but more often the bluetooth has to be turned off & back on again to reconnect. it seems to relate to what other programs are also running. I suspect there must be registry settings which control the bluetooth operational modes which are brought into play by the various programs running.
Recently installed new HTC WM6 Rom and all is sweetness and light......except.......When I accept an incoming call on the Bluetooth Motorola HF850, the first 6 -8 seconds are handled by the Orbit and then the bluetooth kicks in - trouble is the caller has hung up by then!
Tried deleting pairing and reinstalling....anyone with ideas?? Thanks.
Hi all,
I am facing the same problem with my Motorola car kit. Very annoying. I can receive calls and after 6-8 secs they can hear me, but I can not make a call, only mutes sound on both the headset and car kit. I have to select "Turn Off Handsfree" to get it to work... HELPPLEASEE!!!!!
Same exact problem here with Hermes - any ideas anybody?
The solution...
Try jetwaremobile.com - it worked for me on Moto and Siemens HF devices... free trial to see if it works...
I have a partial solution:
I answer the phone on the PDA unit, not on the BT unit, and then I click the blue button on the BT car kit and the phone immidiately connects.
This connects much faster than the usual 10 seconds wait if you answer with your Car Kit button.
TangerineTractor said:
Try jetwaremobile.com - it worked for me on Moto and Siemens HF devices... free trial to see if it works...
Click to expand...
Click to collapse
Hi, this is my first post. I've the same problem with my vario ii (T-mobile) recently upgraded to WM6. Installed the program from jetware and the same problem still persists. Funny enough, it did fix the problem with voice speed dialer.
I've been talking to motorola about their hf850 and they don't have a clue. I used and old MDA Compact II with WM5 and that worked fine with the car kit. I downgraded to WM5 on my Vario II and since this morning my HF850 carkit has been woking as I would expect it to. I definitely think that the problem is with bluetooth on WM6.
I have the same problem with my HTC Tornado (Cingular 2125) with WM6.
Same problem here with Trinity & WM6 - maybe this is a Microsoft/Bluetooth stack problem... any other ideas?
After upgrade to the official HTC WM6 ROM (spanish version) my integrated bluetooth hansdfree CAR-KIT doesn't work anymore (with WM5 the system works perfectly).
The car is a new CITROËN C4 Picasso, but i think this problem must involve any new PSA Group Car (CITROËN, PEUGEOT...) that mount the same kit.
I can pair the CITROËN hansfree with the TyTN, and both connects (i can see the operator name, the battery level, and the signal level, that WM5 stack doesn't show) but when i try to call, or i receive a call, there is no sound throw the hansfree system.
I also have tried the Jetware bt extension with no succes.
At now i had to downgrade to WM5 because this problem (i need the handsfree working).
The cuestion is...
Is it possible for a ROM MASTER to extract a previous bluetooth working TyTN stack to overwrite the stack that comes with official WM6?... (the WM5 or any working WM6 working stack).
Thanks
The same problem here with the same car; also the Artemis on WM6 (I tried several roms) has no sound.
Downgraded to WM5, and it's all working again.
Not yet tried to get an update for the car; maybe there is also a solution.
I have the same problem with Motorola HF-850 car kit. I'm about to downgrade too. This sux.
Same issue here with Nissan Sentra 2008.
I can dial and receive calls but the audio works about 30% or the time. It is hit or miss.
Same here in a 2007 UK CITROËN C4 (5 door hatchback) with factory fitted Bluetooth car kit, using an Orange M3100 with the Schap's WM6 Pro 3.60a ROM. Looks like I'm going back to the Orange WM5 ROM as this is a deal breaker for me. Very disappointing.
try this
I had similair problems a few pretty good solutions:
-jetware search google i use this one
-Solution:2
Change the COD (Class of Device) from a PDA device to a smartphone device.
This can be done this way:
1. First make sure you've got a backup, or remember all settings you change in the registry.
2. Edit with a registry editor the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
By default my vario II does have the value: 1048852 (decimal)
Change this to: 5374476 (decimal).
3. Soft restart your device
4. Voila! Your device now identifies itself as a smartphone
see this thread
http://forum.xda-developers.com/showthread.php?t=290871
Thanks!
I tried the Jetware solution: no luck.
I also tried the COD trick: very strange result, I was able to make just 1 (one) call and other calls were again not possible (no sound).
Maybe there is a solution in updating the software of the handsfree set in the car. I will ask my Citroen agent to do this, if possible.
I will post the results.
I haven't tried the COD trick, but I don't think this will work. It's not a case of my car 'ignoring' my M3100... it pairs OK, and the car's display shows an incoming call, allows me to pick it up, etc, but no sound comes out of the speakers and the other party doesn't hear my voice. It's like the car is receiving the data stream to tell it what's happening on the call, but not the sound.
I don't have any of these problems with WM5, I don't even need to use the JetWare solution.
same problem with Peugeot 407
Same problem here with Peugeot 407
What I found is that if I start a call without Bluetooth and start Bluetooth during the caal, the sound works perfectly. Every next call has the same problem as before though.
TyTN; WM6 Schap's 3.60a;Radio 1.47.00.10
Hi.
I am with Motorola's HF-850 car kit and I get the sound only after 8-10 full seconds from answering. It is so sad that I have to say "wait....wait" every time I answer a call....
There is a post on this forum that suggests someones got it working with an Audi and the latest Black beta rom...
http://www.4winmobile.com/forums/hermes-black-rom-support/11291-black-x-beta-2-smash-trash-11.html
Anyone tried this?
This post also suggests that the newest Black roms may have fixed the issue
http://htc-devs.com/forum/index.php?topic=42.msg321;topicseen
Here's hoping!
That will not work on the Artemis
But I tried several WM6 roms, including the Black & Blue 4.1: no luck.
Looks like a real WM6 issue, as it's happening with several phone models.
UPDATE: No software update for the factory Citroen bluetooth handsfree according to the local dealer; so that's no solution
I have tried 5 of the latest roms yesterday including all the fixed mentioned in this forum. The best I got was with Sleuth rom where I get audio about 50% of the time. Answering with that rom results in a 5 seconds delay before audio connects causing me to yell "wait, wait, I am here ... "
I even tried a blootooth stack from Broadcomm but the result was not better.
Out of desperation as I bought this car specially for its built in bluetooth kit, I downgraded to Cingular Mobile 5 Rom version (2.15.502.3)
I am surprised and kind of thrilled to report that my 8525 and the car kit are working perfectly together and reliably.
There must be either a bug or a setting/configuration issue on the Mobile 6 bluetooth stack that caused this issue. I am unfortunately back to mobile 5 for the time being until this issue is resolved.
SPV m3100, CK3100 AND WM6
I have an Orange SPV M3100 in Spain with WM6 and i have the same problem. With WM5 and Jetware estension, i had to pair parrot and pda manually every time i got into my car, because they did not connect automatically (Blueetoth-->Devices-->Parrot CK3100-->FreeHand-->OK), but then it works well and i could receive and make phone calls.
But since I upgrade to WM6 i have to pair it manuaaly too, they connect, but it only works from time to time; most times, if i make a call it dials but i cannot speak and people does not hear me; if there is an incoming call, I see the number in the displsy but i can receive it.
Anybody with WM6 and Parrot Ck3100 works well?
I have the same problem with a Mio C520 SatNav. Its bluetooth handsfree works fine with WM5 but not WM6.
I also posted this on a thread on bluetooth headsets, http://forum.xda-developers.com/showthread.php?t=301636&page=6
I tried many different versions. So far with Sleuth's WM6, I had sound around 50% of the time. Similar to one of the previous posters.
Until there is a fix I will have to go back to WM5
I use a parrot car kit and it works fine. However, I noticed some new functionality on my lcd, like displaying battery and signal levels which was not available with the original WM5. That was available only with specific phones. Based on that I believe that a firmware update of your car kit could solve the problem. The issue is whether this is provided for you and if you will have to pay. Parrot offers them for free and you can upgrade via BT.
Hi all,
I just bought the Parrot minikit Hands Free car kit.
I am facing allot of problems with this device:
1. The main one is that when I am issuing a call from the TOUCH, the sound remains in the TOUCH and is not routed to the car kit.
2. When someone calls me most of the times I can answer the call and it works fine, but sometimes the phone rings and the car kit not.
I read in the trinity accessories forums that people faced the same problems with other Parrot car kits when they upgraded their roms to WM6.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Did anyone faced problems with the Parrot Mnikit or any other Parrot car kit with the Touch?
Thanks,
Carmi
Carkit problem
Hi,
I have a similar problem. I have my HTC touch paired with a Nokia Bluetooth carkit. I get incomming calls over the speaker but when I answer the call I first have to go to the menu and select "enable handsfree calling".
I can make outgoing calls directly via the carkit whitout selecting an option in the menu. Furthermore the volume is very low compared to my prvious PD (MDA Vario).
Has anyone a fix for this?
Gus
I have The same problem
I have an HTC Touch with a Parrot CK3100 freehand car Kit and have the same problem.
Often, when I receive a call the car kit show the call in display but when I pick up the CK shows an icon (like a musical note) and the audio is not transferred.
When I call from the HTC, some times works fine and some times no.
A partner of my company with the same car kit and a HTC Touch dual, has the same problem too.
With WM5 works fine (I test it with HP6515).
did you set the "services to use from this device" to "Hands Free" ?
This is a known issue with Parrot devices and WM6. I've had the same problem with a couple of different HTC WM6 devices. The problem is specifically related to Parrot, not WM6 in general. I've used the Tytn II with Motorola and BlueAnt BT devices without any problems. I upgraded my minikit from v1.02 software to v1.03, but that hasnt fixed the symptoms which we are all complaining of.
ARE YOU LISTENING PARROT?! Ive had the minikit for 6 months and I'm getting tired of waiting for a version of software that will fix all our problems.
I have the exact same issue with my Parrot 3200. I'm also waiting for a solution from Parrot!
Parrot MINIKIT and Touch problems
I've similar problem.
paired the two devices, sometimes I can start a call from my Touch and the sound is on the MINIKIT speaker, but most of the times the is still on the phone and I have to press the green button to switch the call on the parrot speaker.
I've upgraded the firmware from 1.02 to 1.03.
Another information: I've tested the MINIKIT with my blackberry 8100 and works perfectly, when paired and connected every calls is routed to the parrot speaker, so I think It's an issue between the parrot and WM6.
Any news?
thank you
Besides my Touch I also use my BlackBerry 8800 and that also works fine. With htc it's not working as it should be.
HTC Touch Parrot mk6100 PROBLEM!
With the Parrot mk6100 I have all the problems possible.
This Parrot is supposed to play properly the mp3 files that I have in the touch, but everything is a dissaster. Very long to write. The thouch gets hunged every time.
The worst problem is that the Parrot can't read the contacts in the Touch.
I have spoken with Parrot and Htc here in Spain and both say that the problem is Windows mobile 6.
I don't know what to do...
ive got the dual w mk6100
after having a lot of issues i found out i had to pair it both ways and the mk6100 got to say "bye". then everything worked fine. well almost. but pretty good indeed.
i posted in niki accesories.
it takes time to sync the contacts, true, but it finally does.
as far as i know, touch and touch dual is not that different , except for the mhz.
let me know what you think
Touch cruise and Parrot Minikit
I have the similar problems too. Sometimes the sound cannot be routed to the car kit. There is no way to understand the reason why one time it works fine and another time it cannot move the sound via blue tooth. Sometimes pressing the green button of the parrot minikit is possible to move the sound to the car kit, sometimes it doesn't help - the sounds remains in the HTC. I tested the Parrot minikit paired with Nokia E70 - I haven't seen any problems. Also I have tested the HTC paired with another blue tooth car kit - BHF-200 and all was OK.
I wonder ... if someone knows ... if the WM6.1 (by Bepe) will fix the problem!
Thanks in advance !
Parrot Minikit just tested with QTEK 900, WM6.1-Ranju
The Parrot minikit was tested with my other PPC - QTEK 9000 (HTC Universal) and I didn't see any problems. The QTEK works under WM6.1 (Ranju pack).
So I really wonder ... to upload WM6.1 to my HTC touch cruise ...
Any comments and opinions are welcome.
Thanks in advance !
p.p. My HTC touch cruise is still with its original WM6.0 ...
Bluetooth Hotfixes
Has any of you guys or girls tried any of the "Bluetooth Hotfixes", that are available for HTC branded devices on the HTC e-Club site.
It seems to fix dropped calls and connection probs. (and it seems to work)
The hotfix is available for several HTC devices.
You just have to register your HTC branded phone to get to the download portion of the site for your model, and see if it's available.
It's definitely there for the Elf, Tytn II and S710 (i'm not sure if it's there for the Touch cruise)