Hello
My device is XDA IIi (Alpine).
I got a bluetooth stereo with hands-free capabilities device qstarz BH-Q392S and I had my bluetooth stack updated with the needed profiles. I paired the devices and the stereo (high quality) and the hands-free profiles are working correctly. However, I have two buttons in my bluetooth stereo: "Next" and "Previous" that are used to change tracks. They are not working for me.
Is there a special program I have to install in order to make them work?
Did I miss something, or they cannot be used at all on Pocket PCs ?
The stack that you upgraded your device with, did they come with the headphones? I've got a pair of HP headphones and the track buttons don't work (on my magician) because the stack does not support it. If I had an HP device and installed the proper software the buttons would work.
Now it is working
First of all, my bluetooth stack was downloaded from: http://www.pdagold.com/forums/view_topic.asp?t=5012&fi=0
The buttons did not work with the normal windows media player, so I read that TCPMP has a support for buttons. After installing TCPMP I ran it, clicked "Options>Settings>Select Page>Advanced" and I checked the "Widcomm BT Audio button support" box. After restarting TCPMP the buttons worked !!!
I'm so happy!
Hello,
I've just received the HTC remote control/headphone adapter, loaded the drivers on my XDA Orbit and all seemed well - all buttons working as they should.
My problem is with that when listening to the radio via the remote control the radio cuts out after 3 minutes when the phone goes to sleep. The same happens when I hit the power button while listening. Basically the radio thinks that the headphone got disconnected and stops playing. With the orinigal headphones, the radio keeps playing even when the phone goes to sleep (I've tested this following the driver install and it still works fine with the original headphones).
Is anyone else having this problem or know a solution? The main reason I bought the remote was for the radio support
Thanks in advance,
Alex
have you checked the power settings found on the ppc at
Start > Settings > System tab > Power
you may have to untick the option to power off after 3 mins when running off the battery or keep the phone on charge while using the radio.
you need to install the Audio Driver Update for the P3300 from HTC's website. The problem is well described (well, by me) on the internet if you google a bit or search in this site.
e.g.
http://forum.xda-developers.com/archive/index.php/t-307388.html
for the driver:
http://www.europe.htc.com/support/software/htcp3300.html
HTC has been very sloppy with the release driver of this headphone and it does not allow you to use those buttons on the remote by other applications apart from WMP/HTC Audi Manager and the FM Radio app.
humps said:
you need to install the Audio Driver Update for the P3300 from HTC's website. The problem is well described (well, by me) on the internet if you google a bit or search in this site.
e.g.
http://forum.xda-developers.com/archive/index.php/t-307388.html
for the driver:
http://www.europe.htc.com/support/software/htcp3300.html
HTC has been very sloppy with the release driver of this headphone and it does not allow you to use those buttons on the remote by other applications apart from WMP/HTC Audi Manager and the FM Radio app.
Click to expand...
Click to collapse
The driver is no longer found at
http://www.europe.htc.com/support/software/htcp3300.html ... anyone knows where to get it ?
HI,
I'VE UPGRADED MY BA WITH KitchenAKU3.5v2-XPLODE
tHEN I UPGRADED RADIO TO 1.15.
THE PROBLEM WITH MY BLUETOOTH (BT) HEADSET IS IT'S ABLE TO WORK WHILE USING IT WITH THE PHONE BUT WHEN I TRY TO LISTEN TO MUSIC USING WINDOWS MEDIA PLAYER OR TCPMC PLAYER IT ALLOWS ME TO HEAR JUST FEW SECONDS OF THE SONG AND THEN IT BECOME AS MUTE.
IF I CLOSE THE PLAYER APPLICATIONS (BOTH WMP OR TCPMC) IT STARTS AGIN WORKING ALLOWING ME TO HEAR ALSO THE "TAP" SOUNDS WHEN I HIT THE SCREEN WITH THE PENCIL.
I HAVE TRIED USING ALSO AN OTHER KIND OF BT HEADSET AND THE REACTIONS ARE THE SAME.
NOTE: WHEN I CONNECT TO THE HEADSET BY BT THE MANAGER SHOWS ME THE AVAIABLE SERVICES FOR IT WHICH ARE "HEADSET" AND "WIRELESS STEREO" (AND CONNECTING IT IS POSSIBLE TO HEAR ALSO THE CLASSIC CONNECTION SOUND BY THE HEADSET).
Please, how can i solve the problem? do i need to use an other flash rom ?
PS: SORRY FOR MY ENGLISH ; I'M ITALIAN
I am having the same problem with the Wireless Stereo BT
And having a big head ache out in the nowhere!
Could you find the answer?
My MSN:
[email protected]
Greetings from China!
laura_kim said:
HI,
I'VE UPGRADED MY BA WITH KitchenAKU3.5v2-XPLODE
tHEN I UPGRADED RADIO TO 1.15.
THE PROBLEM WITH MY BLUETOOTH (BT) HEADSET IS IT'S ABLE TO WORK WHILE USING IT WITH THE PHONE BUT WHEN I TRY TO LISTEN TO MUSIC USING WINDOWS MEDIA PLAYER OR TCPMC PLAYER IT ALLOWS ME TO HEAR JUST FEW SECONDS OF THE SONG AND THEN IT BECOME AS MUTE.
IF I CLOSE THE PLAYER APPLICATIONS (BOTH WMP OR TCPMC) IT STARTS AGIN WORKING ALLOWING ME TO HEAR ALSO THE "TAP" SOUNDS WHEN I HIT THE SCREEN WITH THE PENCIL.
I HAVE TRIED USING ALSO AN OTHER KIND OF BT HEADSET AND THE REACTIONS ARE THE SAME.
NOTE: WHEN I CONNECT TO THE HEADSET BY BT THE MANAGER SHOWS ME THE AVAIABLE SERVICES FOR IT WHICH ARE "HEADSET" AND "WIRELESS STEREO" (AND CONNECTING IT IS POSSIBLE TO HEAR ALSO THE CLASSIC CONNECTION SOUND BY THE HEADSET).
Please, how can i solve the problem? do i need to use an other flash rom ?
PS: SORRY FOR MY ENGLISH ; I'M ITALIAN
Click to expand...
Click to collapse
Quote from the user "aaraj":
One way to solve the BTA2DP problem is you download the software from http://www.teksoftco.com/index.php section=freeware. Install the cert cab file if u using WM6. Pair your headset with ur pda by checking the box wireless stereo & hands free. Then press the green color button in front ot the screen to toggle pda with the headset after a sometime u will hear music from headset. hope this will help u
I turn off my plantronics 560 and media app (WMP), and turn it on again
then the app.
It works for me.
when connecting any "STEREO" headset i can't raise or lower volyme, it's always at max regardless of volyme onscreen.
probably this is due to new bluetooth drivers and hardware.
But if anyone got the same problem or solution plese post it..
smaberg said:
when connecting any "STEREO" headset i can't raise or lower volyme, it's always at max regardless of volyme onscreen.
probably this is due to new bluetooth drivers and hardware.
But if anyone got the same problem or solution plese post it..
Click to expand...
Click to collapse
Woo. U got the Rhodium too??
To answer your question, it's a well known issue w/ Broadcom stack. And there could poping sound issue as well if you have multiple program sending sound together (e.g. A2DP w/ coreplayer + Voice prompt w/ GPS program) <== Can you verify this.
I don't have Rhodium (maybe yet) but my Asus P525 w/ broadcom stack has this problem. Never heard any solution so far.
a2dp
yes, I can confirm the same problem: with A2DP the side keys do not work for volume setting (they set the system volume which is not coupled to the BT volume when having the WidComm stack).
the workaround is to have a media player with separated volume setting like CorePlayer, which works pretty fine for me
that aint the problem, the problem is that every time i connect the stereo headset it sets the volyme to max and i cant lower the volyme by any meens. (yes ive tried about 5 different brands of headsets)
BT vol
what do you mean by "any means" - which controls did you try? the sidekeys will definitely not work, as I stated above. only if the player has a separate volume slider, that'll do something.
terta said:
what do you mean by "any means" - which controls did you try? the sidekeys will definitely not work, as I stated above. only if the player has a separate volume slider, that'll do something.
Click to expand...
Click to collapse
i tried the hardware keys, htc volyme control and built in control of coreplayer.
coreplayers built in volyme works in 1 out of 3 times, and this is tried right after hardreset.
BT vol
well, CorePlayer volume setting works for me always - no matter if I did hardreset or not (and I'm quite a heavy user with Igo, Exchange MailSync, Opera, etc.). CP version is 1.3.2 build 6909.
(and my headset is SonyE. HBH-IS800)
terta said:
yes, I can confirm the same problem: with A2DP the side keys do not work for volume setting (they set the system volume which is not coupled to the BT volume when having the WidComm stack).
the workaround is to have a media player with separated volume setting like CorePlayer, which works pretty fine for me
Click to expand...
Click to collapse
Unfortunately, some stupid program like TomTom, IGO do not has this option...
BTW, do you folks encounter any "poping", or sound distortion issue when multiple programs (e.g. GPS + Coreplayer) trying to play sound together? It would be a deal breaker to me if it does...
distortion
did not have this scenario yet - I use igo in the car where I have a BT handsfree carkit which does not use A2DP. so igo announces everything on the own TP2 speaker, while calls are on the car radio.
jackleung said:
BTW, do you folks encounter any "poping", or sound distortion issue when multiple programs (e.g. GPS + Coreplayer) trying to play sound together? It would be a deal breaker to me if it does...
Click to expand...
Click to collapse
When I use IGO8 and the audiomanager at the same time, the sound works for a while and than stops working. I Have to turn bluetooth of, soft reset and turn everything again. But the same problem happens again. Even trying to use WMP or HTCAlbum to watch videos and listen with a2dp the same problem happens again.
I dont know, but it seems that the bluetooth memory reaches a level and than it stops working. I dont Know. Any Ideas ???
Thanks
I have the same problems. It's really unpleasant !
So, i tried to install Advanced_Configuration_Tool_v3.3 and v3.2 to try configurate control volume, but the program doesn't work on my Rhodium...?!?
I have the same problems. It's really unpleasant !
So, i tried to install Advanced_Configuration_Tool_v3.3 and v3.2 to try configurate control volume, but the program doesn't work on my Rhodium...?!?
I'm using the hbh-is800 and experienced the same problem of not being able to control the volume which seemed to always be at max. this was especially frustrating as i quite like the tf3d player, but was forced to use other players with software volume control.
My makeshift fix was to edit the registry for the default volume of the tf3d player.
\HKLM\Software\HTC\AudioManager_Eng\Config
music_player_volumn default = 100
I lowered it to 30 and after a soft reset the volume on my hbh-is800 is now at a comfortable level.
i still can't change the volume on the fly, but a fixed comfortable volume is better than the original fixed max volume.
Hi
I am using mw600 over x1 and encountered few draw back .. These are ..
1). Song details are not shown
2). manilla music tab/ Nitrogen doesn't support forward/ back buttons / play/pause
3). sometimes its hard to connect bnluetooth if its been turned off.
Is anyone having solution for any of Stated above ?????
1) Install smartWatchM (link here). It will enable song titles to display.
2) Manila music tab doesn't naturally support AVCRP (remote control via bluetooth). However, jackleung's ROM (link here) has this feature working.
3) Not sure about the MW600 but my DS980 connects fine. But I noticed that after I switched to different ROMs (with HTC Sense), I cannot use the bluetooth headset for calls anymore.. but it works fine with stereo audio.
smartWatchM didnt worked 4 me ... any other help or can u help me how to configure it ...