Hi
I am using mw600 over x1 and encountered few draw back .. These are ..
1). Song details are not shown
2). manilla music tab/ Nitrogen doesn't support forward/ back buttons / play/pause
3). sometimes its hard to connect bnluetooth if its been turned off.
Is anyone having solution for any of Stated above ?????
1) Install smartWatchM (link here). It will enable song titles to display.
2) Manila music tab doesn't naturally support AVCRP (remote control via bluetooth). However, jackleung's ROM (link here) has this feature working.
3) Not sure about the MW600 but my DS980 connects fine. But I noticed that after I switched to different ROMs (with HTC Sense), I cannot use the bluetooth headset for calls anymore.. but it works fine with stereo audio.
smartWatchM didnt worked 4 me ... any other help or can u help me how to configure it ...
Related
Hello
My device is XDA IIi (Alpine).
I got a bluetooth stereo with hands-free capabilities device qstarz BH-Q392S and I had my bluetooth stack updated with the needed profiles. I paired the devices and the stereo (high quality) and the hands-free profiles are working correctly. However, I have two buttons in my bluetooth stereo: "Next" and "Previous" that are used to change tracks. They are not working for me.
Is there a special program I have to install in order to make them work?
Did I miss something, or they cannot be used at all on Pocket PCs ?
The stack that you upgraded your device with, did they come with the headphones? I've got a pair of HP headphones and the track buttons don't work (on my magician) because the stack does not support it. If I had an HP device and installed the proper software the buttons would work.
Now it is working
First of all, my bluetooth stack was downloaded from: http://www.pdagold.com/forums/view_topic.asp?t=5012&fi=0
The buttons did not work with the normal windows media player, so I read that TCPMP has a support for buttons. After installing TCPMP I ran it, clicked "Options>Settings>Select Page>Advanced" and I checked the "Widcomm BT Audio button support" box. After restarting TCPMP the buttons worked !!!
I'm so happy!
Is anyone using either Sony Ericsson HBH-DS970 or Nokia Wireless Stereo Headset HS-12W with Artemis? If so, how's the audio quality? Do you need to install extra software? Do all the buttons work? And do track titles show on the display?
Thanks!
Rick
rickgillyon said:
Is anyone using either Sony Ericsson HBH-DS970 or Nokia Wireless Stereo Headset HS-12W with Artemis? If so, how's the audio quality? Do you need to install extra software? Do all the buttons work? And do track titles show on the display?
Thanks!
Rick
Click to expand...
Click to collapse
i use Sony Ericsson HBH-DS970 - it's greate. use windows media for playing music. All work fine. All buttons work. But one thing - when i use it and have incoming call - music start play in headset
I have same problem I hope to find a plug to fix this. If you already have, Please let me know too. thanks in advance!
TomKlan said:
I have same problem I hope to find a plug to fix this. If you already have, Please let me know too. thanks in advance!
Click to expand...
Click to collapse
in bt settings -> tab devices -> tap on headset -> select edit -> uncheck Wireless stereo
when you need to play music turn on this option again...
Spasibo za msg
Problems Solved
I just recently got my P3300 and a nice Sony Ericsson HBH-DS970. I had a lot of problems with the original Windows Mobile 5 at first. It recognized the unit as a2dp and I set the P3300 tu use a2dp functionality of the sony headphones. NADA! Nothing happened. I could just use it as regular hands-free. Then I found this site and first upgraded mu ROM to
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.rar
I didn't like it because it was for Asian market, no localization etc. and some problems...
Then upgraded to
Tom_ART_v2.00.02_CB.rar
Brilliant!!!! Looks like WM6 and has a lot of new functionality +
working A2DP profile. Now the Sony Ericsson HBH-DS970 is working 100%. No bugs, no music while ringing or other problems. Just perfect!
The only disapointment - There is no Radio! In order to run the radio you must use the original hands-free. they say it is because it uses the wire as antena. I tried to hook both the Sony Ericsson HBH-DS970 and the original hands-free -> the sound coming only from the original. SORRY.
I read somewhere that the Nokia model has a built in Radio. So if you need the Radio go for the Nokia one. Though they say the sound from the Sony Ericsson HBH-DS970 is way better! If you prefer MP3's with better sound go for the Sony.
Hope this helps.
i use the nokia hs 12w and the sound quality is excellent.
Do you guys have enabled or disabled the registrykey "UseJointStereo"?
I'm using the HTC BHS100 Bluetooth together with a V-Moda Vibe. When I enable this key (value set to 1) I have superior sound quality but in jointstereo. When I disable this key (value set to 0) to achieve real stereo sound I hear a high pitch noise and the sound is far from superior but in real stereo. This really anoise (typo?) me alot and it doesn't matter whether I'm using the original earphones that comes with the bluetooth or the v-moda earphones or even my full sized dj headphones.
All in all i'm just looking for a wired solution to get the superior stereo sound but that is a problem too. Because a mini-usb to 3.5mm adapter doesn't disable the built-in speaker when listening to music (using an HTC Y cable)
...Because a mini-usb to 3.5mm adapter doesn't disable the built-in speaker when listening to music (using an HTC Y cable)...
Click to expand...
Click to collapse
Have you tried this update: http://www.europe.htc.com/support/software/htcp3300.html
HTC:
"HTC audio Drivers
Downloading and installing this driver update will provide your HTC mobile device with the latest available optimised software for use with the following accessories:
YC A120 Y-Cable adaptor
RC W100 Remote Controller
RC E100 Remote Controller"
Tried it just now but I get the message that I already have the latest drivers installed and then it ends the installation.
I'll try to put back the original rom and then install the driver to see if it makes any difference. That is if I'm able to put it back somehow (extended rom has original rom but hardreset still installs the modified rom).
Finally...after installing WM6, the device recognise the Y cable as a headset (registry automatically change value into 1) and now I can enjoy music in full stereo quality. WHOOHOO
Hi,
Is there any way to set the bluetooth stereo headset connection to default stereo? sorry about my english.
so If i connect may stereo headset to the phone the defaul is mono headset i have to go to bt settings and change the profile to stereo after that working fine, I can handle incoming calls etc. but I have to change the profile after reconection again. If I uncheck the headset and handsfree profiles then the stereo working fine but i cant handle the incoming calls from the haedset only with the phone.
so is there a solution to keep the default profile stereo and keep the other two profil in live?
it tries to you works in stereo
Quick question for anyone with a BT stereo headset - if i get a BT dongle, could i connect the headset to a PC and get voice comms via teamspeak to work? Assuming that the dongle and headset does all the A2DP and other profiles?
Basically I'm just trying to see if its feasible - It'd be nice to use the headset for music with the phone, then use it as a wireless headset for games and voice comms when at home.
Furbious said:
Quick question for anyone with a BT stereo headset - if i get a BT dongle, could i connect the headset to a PC and get voice comms via teamspeak to work?
Click to expand...
Click to collapse
Yes, and with VOIP & MSN etc. too. The headset appears in the audio properties box on windows or the app you are running.
Thanks -
Before i go and splash out on one - can you confirm a headset that will deliver quality stereo while using the mic
Virtually everywhere i've been, they say that as soon as you use the mic, it will drop down to 8khz mono for sound as it switches from A2DP to the headset one.
If you or anyone have a BT stereo headset, is there any chance you can play a normal 3D game and see if you can talk over teamspeak without it dropping to mono?
Furbious said:
Quick question for anyone with a BT stereo headset - if i get a BT dongle, could i connect the headset to a PC and get voice comms via teamspeak to work? Assuming that the dongle and headset does all the A2DP and other profiles?
Basically I'm just trying to see if its feasible - It'd be nice to use the headset for music with the phone, then use it as a wireless headset for games and voice comms when at home.
Click to expand...
Click to collapse
I think u need to get headset with multipoint headset if u want keep in live the phone and the PC connection same time. like jabra BT8010 or BT320s.
I use Jabra 5020 (mono) and working fine for Voip and Phone same time.
HI,
I'VE UPGRADED MY BA WITH KitchenAKU3.5v2-XPLODE
tHEN I UPGRADED RADIO TO 1.15.
THE PROBLEM WITH MY BLUETOOTH (BT) HEADSET IS IT'S ABLE TO WORK WHILE USING IT WITH THE PHONE BUT WHEN I TRY TO LISTEN TO MUSIC USING WINDOWS MEDIA PLAYER OR TCPMC PLAYER IT ALLOWS ME TO HEAR JUST FEW SECONDS OF THE SONG AND THEN IT BECOME AS MUTE.
IF I CLOSE THE PLAYER APPLICATIONS (BOTH WMP OR TCPMC) IT STARTS AGIN WORKING ALLOWING ME TO HEAR ALSO THE "TAP" SOUNDS WHEN I HIT THE SCREEN WITH THE PENCIL.
I HAVE TRIED USING ALSO AN OTHER KIND OF BT HEADSET AND THE REACTIONS ARE THE SAME.
NOTE: WHEN I CONNECT TO THE HEADSET BY BT THE MANAGER SHOWS ME THE AVAIABLE SERVICES FOR IT WHICH ARE "HEADSET" AND "WIRELESS STEREO" (AND CONNECTING IT IS POSSIBLE TO HEAR ALSO THE CLASSIC CONNECTION SOUND BY THE HEADSET).
Please, how can i solve the problem? do i need to use an other flash rom ?
PS: SORRY FOR MY ENGLISH ; I'M ITALIAN
I am having the same problem with the Wireless Stereo BT
And having a big head ache out in the nowhere!
Could you find the answer?
My MSN:
[email protected]
Greetings from China!
laura_kim said:
HI,
I'VE UPGRADED MY BA WITH KitchenAKU3.5v2-XPLODE
tHEN I UPGRADED RADIO TO 1.15.
THE PROBLEM WITH MY BLUETOOTH (BT) HEADSET IS IT'S ABLE TO WORK WHILE USING IT WITH THE PHONE BUT WHEN I TRY TO LISTEN TO MUSIC USING WINDOWS MEDIA PLAYER OR TCPMC PLAYER IT ALLOWS ME TO HEAR JUST FEW SECONDS OF THE SONG AND THEN IT BECOME AS MUTE.
IF I CLOSE THE PLAYER APPLICATIONS (BOTH WMP OR TCPMC) IT STARTS AGIN WORKING ALLOWING ME TO HEAR ALSO THE "TAP" SOUNDS WHEN I HIT THE SCREEN WITH THE PENCIL.
I HAVE TRIED USING ALSO AN OTHER KIND OF BT HEADSET AND THE REACTIONS ARE THE SAME.
NOTE: WHEN I CONNECT TO THE HEADSET BY BT THE MANAGER SHOWS ME THE AVAIABLE SERVICES FOR IT WHICH ARE "HEADSET" AND "WIRELESS STEREO" (AND CONNECTING IT IS POSSIBLE TO HEAR ALSO THE CLASSIC CONNECTION SOUND BY THE HEADSET).
Please, how can i solve the problem? do i need to use an other flash rom ?
PS: SORRY FOR MY ENGLISH ; I'M ITALIAN
Click to expand...
Click to collapse
Quote from the user "aaraj":
One way to solve the BTA2DP problem is you download the software from http://www.teksoftco.com/index.php section=freeware. Install the cert cab file if u using WM6. Pair your headset with ur pda by checking the box wireless stereo & hands free. Then press the green color button in front ot the screen to toggle pda with the headset after a sometime u will hear music from headset. hope this will help u
I turn off my plantronics 560 and media app (WMP), and turn it on again
then the app.
It works for me.
Hello all,
I have a new HTC Touch Pro 2 (Raphael) and I have spent the last 2 house trying to get the system audio and mic (not phone audio) to route to my bluetooth headset or bluetooth audio in my car hands free and I can't seam to get any working..
This is what I have tried:-
Bluemusic V2
audioroute V1.2.020 (via XDA developers) - this works great allowing system audio to go through the phone speaker but no bluetooth function.
Sound Destination Gotlandh (via XDA developers) - works on old HTC Hermes but not HTC Touch Pro 2. - also needs headset button to set route audio but no button on car handsfree.
BTaudio (via XDA developers) - BTAudioOff.exe BTAudioOn.exe files - this would be great but I get an error when try to run - Failed to enable BT audio.
Surely with this latest phone I can use Skype/an SIP VOIP application/media player with the bluetooth headset - anyone got it working?
Thank you
Which phone do you have? The Raphael isn't the TP2. The TP2 is the Rhodium found here.
Opps,
thanks mindfrost82 - I made a mistake, it is a HTC touch pro 2 - please can a moderator move this to the Rhodium forum?
I have the same desire - I use this regularly and it appears that the WIDCOMM stack is sufficiently different that the existing little program (BTAudioOn/Off and BTAudioToggle) no longer work.
Blargh - anyone have a solution?
THERE IS! Its built in - go to the Bluetooth config screen, go to SETTINGS/Advanced, and in there under "Audio" is an option to route system sounds to the handsfree.
DONE!
Note that it has a side effect - it leaves the connection open forever if there's an audio stream available to it, so be cautious or you can drain the hell out of your battery, plus you won't ring normally (it will ring through to the headset) until you turn it off.
Hahaha - I discovered this today as well by accident!
Well done Genesis3!
I have tried the bluetooth headset with Skype and SJphone VOIP application and the bluetooth headsets speaker and mic work, the only strange thing is for some reason the bluetooths mic sound is speeded up the other end when heard on both Skype, Fring and SJphone, it sounds like I have inhaled a helium baloon!!
As soon as I disable bluetooth headset and speak with the speakerphone, the sound heard the other end is normal again.
Any Ideas anyone?
I have tried many bluetooth audio router software to get this far and I wonder if some registry settings are messed up. (the standard bluetooth connection to a normal phone call is fine)
Same thing here. Cant use skype through my bluetooth. Audio is routed to rer speaker
Genesis3 said:
THERE IS! Its built in - go to the Bluetooth config screen, go to SETTINGS/Advanced, and in there under "Audio" is an option to route system sounds to the handsfree.
Click to expand...
Click to collapse
I just wanted to say Thank You! I've been going around in circles trying different btaudio this btaudio that to find a working solution and was even willing to pay 30 bucks for a program that would do it! Suffice to say, this worked perfectly with mortplayer and the audio stream I wanted to monitor.
Audio thru Bluetooth
Sure this works but isn't there a quick button (hopefully from the taskbar) that can accomplish this without going thru the 6 screens to get this done? Something similiar to Audioroute that would work on a Touch Pro 2 would be ideal..
..........
I just bought a mw600 for my sony acro s, tried to connect & use but I am depressed:
1. Track name is not showed in lcd. While it is working fine & smoothly with many models of the other brands, 2 product of sony not compatible is really difficult to accept
2. Firstly i connect & play walkman, the sound appear. But when I push call button of headset phone access voice command, but when i finish call work can not hear any sound any sound from media even walkman still running, media buttons (play, pause, next, previous) are still working fine, only sound disappears. I access to Bluetooth setting & find that if I disconnect phone audio, the sound of media return back automatically. But it disappears when I check to connect phone audio again, of course i can not use headset to call if I disconnect phone audio. i try to connect with my last headset Motorola hd-9, it is working fine, change from media to call or opposite automatically.
Please help me to solve above 2 problem.
Thank you so much