New LCD Screen does not work. - P3600 ROM Development

I have put in a new LCD screen into the device and it refuses to power up.
I can still hear wm6 in the background loading with all my reminders etc.
The old screen is cracked but still powers up etc.
Any ideas?

Fixed the problem.
I had to make sure all the contacts were touching for the LCD screen to work properly.
I guess during the cracking it bent something....

Related

White screen, cable problems, unusable BA... Please help!! Thank you!

Hi all! I hope I'm not disturbing here, but I'm quite desperate with regards to my poor BA... After replacing the display about a year ago (the touch-sensitive layer had broken) everything was going well, but something bad has been happening for some months now, and I think it has come to the point of no-return...
At first, when I slid the BA open, there would be a point in which a change in the colors on the display happened, as if the the Red and Blue channels worked well while the Green one was dim (as noticeable during the boot process). Then, opening it completely, it came back to the normal state. The situation worsened, sort of "interference" could be seen while opening the BA, the touchscreen would lose calibration after some openings and closings and so on...
Now the worst: when I turn it on, the screen is completely blank and white; sliding it back and forth would once get it to work, but now it is completely useless. About halfway between the open and closed positions the backlight itself turns off and then on again. It is impossible to see anything and it is unusable!! I opened the BA and made sure everything was connected, I re-connected the LCD and the touchscreen cable but nothing changed... I don't know what to do...
Does anyone have any suggestions? Can I try to repair it or to have it repaired, or, as it is a bit visibly used, should I resign myself to saying it goodbye?? Thanks for your patience and help...
News!! I rried to replace the new screen with the old (broken touchscreen) one, and that one works. Save for a problem, the green colour is lightly dim in the exact positions in which the backlight goes off with the "new" but not working display... Does anyone have an explanation for this behaviour? Thanx again!!

Help! - Screen not working

I've replaced my broken screen with a new one and it doesn't work. It lights up in black with a few pixels in different colours but nothing more. The same happens now with the old screen after I put it back. I guess the rest works fine because I can synchronise with ActiveSync.
Can anyone tell me where I went wrong with the replacement procedure? Is there anything I can do now?

[Q] Screen remains static when keyboard is slid in

Hi
I bought a new RHOD100 and am running Stock WinMo 6.5. First few days the phone worked beautiful. But about a week of usage landed me in this condition.
The screen only lights up with the keyboard is out and not tilted. Other than that, if it's slid in (portrait mode) or when it is tilted up, the screen freezes to whatever it was like when the keyboard was slid out. The touch functions work, I can hear screen tap sounds, and if I click on the right icon things open and close too, but the display remains frozen until I slide out the keyboard and/or undo the tilt.
Any ideas how to fix this? Is that hardware or software?
I have never dropped it, nor exaggerated the tilting.. Can it be the Flex cable?
Definitely hardware... almost 99.99999999% sure this issue is hardware.
I'm betting it is indeed the flex cable. If you're feeling brave, you can attempt to take the phone apart and see if you can find the issue - keep in mind, this is very delicate and tedious work. Need a steady/careful hand and a lot of space! Good tools help too .
http://www.ifixit.com/Device/HTC_Touch_Pro_2
http://www.ifixit.com/Guide/Installing-HTC-Touch-Pro-2-Display-Screen/5546/1

Touch screen help

Hi all.
My wife's s4 mini started to play up, 1/4 of the touch screen from the bottom has stopped working. this means she cannot assess app tray, call log etc.
the screen itself looks fine and all other parts are responsive to touch.
I manage to reset the phone by turning it sideways to assess all the keys but this has not solved the issues.
Do I need a new screen or can this be repaired?
thanks

Black Screen

So my phone has had some tumbles during me using it but outside of some cracks the phone was mostly fine.
Sometimes the touchscreen wouldn't respond properly but locking and unlocking the phone always fixed it.
After waking up and using my phone for about 10 minutes, My phone's screen suddenly went black and it won't show anything anymore.
It's not black as in not turning on, because I can see that the backlight turns on. it just doesn't display anything else.
Can this be fixed by just replacing the screen? or is there any other fix, which i doubt
Same here...?
Did you get it repaired. What was the problem..?
Same issue
Natesvn said:
So my phone has had some tumbles during me using it but outside of some cracks the phone was mostly fine.
Sometimes the touchscreen wouldn't respond properly but locking and unlocking the phone always fixed it.
After waking up and using my phone for about 10 minutes, My phone's screen suddenly went black and it won't show anything anymore.
It's not black as in not turning on, because I can see that the backlight turns on. it just doesn't display anything else.
Can this be fixed by just replacing the screen? or is there any other fix, which i doubt
Click to expand...
Click to collapse
+1
I am facing the same issue of Screen getting black. The sound keeps on coming but the display turns dark. It gets normal after a restart.

Categories

Resources