White screen, cable problems, unusable BA... Please help!! Thank you! - MDA III, XDA III, PDA2k, 9090 General

Hi all! I hope I'm not disturbing here, but I'm quite desperate with regards to my poor BA... After replacing the display about a year ago (the touch-sensitive layer had broken) everything was going well, but something bad has been happening for some months now, and I think it has come to the point of no-return...
At first, when I slid the BA open, there would be a point in which a change in the colors on the display happened, as if the the Red and Blue channels worked well while the Green one was dim (as noticeable during the boot process). Then, opening it completely, it came back to the normal state. The situation worsened, sort of "interference" could be seen while opening the BA, the touchscreen would lose calibration after some openings and closings and so on...
Now the worst: when I turn it on, the screen is completely blank and white; sliding it back and forth would once get it to work, but now it is completely useless. About halfway between the open and closed positions the backlight itself turns off and then on again. It is impossible to see anything and it is unusable!! I opened the BA and made sure everything was connected, I re-connected the LCD and the touchscreen cable but nothing changed... I don't know what to do...
Does anyone have any suggestions? Can I try to repair it or to have it repaired, or, as it is a bit visibly used, should I resign myself to saying it goodbye?? Thanks for your patience and help...

News!! I rried to replace the new screen with the old (broken touchscreen) one, and that one works. Save for a problem, the green colour is lightly dim in the exact positions in which the backlight goes off with the "new" but not working display... Does anyone have an explanation for this behaviour? Thanx again!!

Related

Screen fades in to white

My screen fade in to white any ide what that happens or what i can do to orevent it from fading like that. or is it broken beyond repair
Hi, here's an active thread on the whitescreen to check for possible solutions:
http://forum.xda-developers.com/showthread.php?t=321163
tnx alot, I wasent sure there was a solution to my problem.
Another White Screener
I to have now joined the white screen brigade! phone was working fine and suddenly started doing it. I have tried several WM6 roms since, and the same problem eventuates. I notice on first booting, that some of the details are at the top of the screen as well as the bottom (M.S.B etc instead of all at the bottom) Even the windows green screen has a thin band of bright green at the top which clearly belongs at the bottom, like some other complainants, I also find some of the fast key buttons (internet and mail) do not work. I took it to the service centre who will not do anything with it while it has WM6 in it (Jasjam have not realease that here). They want to revert it to WM5 (at my cost) and then try and repair, with no guarantee. Some deal huh. Any ideas, surely it cant just be the rom if the problem continues with additional roms, and can it really be just flex if the buttons stop working?
Slow computers!!
Damn...after all that typing I just found Alkizmos reply....thanks...I will go back to the repair shop i think!!

[Q] TocuhFlo3D problem!

Hi! I have a big problem with my Rhodium.
I have post another similar thread before but aybody seems to respoding..
I don't know what happened to my phone.
The touchflo3D seems to not responding. in other words the screen reacts when I tap on it, but I can't move or select anything on the screen.
I don't understand if it's a software or hardware problem.
The problem born with a custom rom I installed.
R [WWE|GER|FRA|ITA|NLD] |Feb 12| Energy™-.¸¸.·´¯ 6.5|21916 / 6.5.X|28244 * Sense 2021
after few days of no problem, the screen became as I described, incapable to select anything.
I tried also to move to the settings to disactivate sense but it was impossible with only the keyboard.
I searched on the forum for the solution, but the methods proposed didn't resolve the problem!
So I decided to return to the ufficial Rom.
RUU_Rhodium_HTC_ITA_1.19.408.1_Radio_Rhodium_3.44. 25.27_Signed_Ship
I performed a HardReset before the reinstall of the ufficial rom, but the problem remained.
So I performed a task29, but after the reinstall nothing changed and the TouchFlo seem to be broken.
I followed the guides proposed but I don't think I commited something wrong...
I suppose is a problem of the software because, I repeat, the screen react to my tap when is in minimum light.
Please help me because I don't know whato to do...
Tnx to All!!!!
Is the issue *only* with Touchflo? Can you tap on the Start menu and bring it up?
I'm confused as to why you say "the screen reacts when I tap on it, but I can't move or select anything on the screen"
How can you tell if the screen reacts?
Mnementh666 said:
Is the issue *only* with Touchflo? Can you tap on the Start menu and bring it up?
I'm confused as to why you say "the screen reacts when I tap on it, but I can't move or select anything on the screen"
How can you tell if the screen reacts?
Click to expand...
Click to collapse
Hi! No I can't tap on the start menù and when I tap on any icon on the screen nothing happens!
What I meant with "the screen seems to react" is that (sorry for my English XD!) before the screen goes black, the light goes high to low, ok?
when the screen has low light, and I tap on the screen, the light goes to high, so it seems that the screen can react to my tap.
tnk you very much for your response.
If I wasn't capable to explain correctly, please tell me 'cause I'm a little worried for my phone!
Bye.
i don't want to bring down any hope left, but if it does not respond to anything you do, i think your phone has just lost its flat cable. It might be broken and fixing it up would be a total pain. I would bring it back to where you bought it. Contact me through pm for further details, if u're still wondering what does this mean.
G4rreT84 said:
Hi! No I can't tap on the start menù and when I tap on any icon on the screen nothing happens!
What I meant with "the screen seems to react" is that (sorry for my English XD!) before the screen goes black, the light goes high to low, ok?
when the screen has low light, and I tap on the screen, the light goes to high, so it seems that the screen can react to my tap.
tnk you very much for your response.
If I wasn't capable to explain correctly, please tell me 'cause I'm a little worried for my phone!
Bye.
Click to expand...
Click to collapse
This sounds either like a broken / damaged ribbon cable (the "flat cable" the previous poster was referring to) or a damaged / broken digitizer.
On my old phone, the digitizer slowly broke - first the accuracy of the touchscreen would slide, then it got to the point where it wouldn't register 'on screen' at all, even though the phone could still tell I was tapping the screen because the backlight would come on etc, just as you describe.
Replacing the digitizer will cost money, but if you're going to do that find someone good at doing it! And also consider getting the device checked out and replacing the ribbon cable too, it's probably one of the most vulnerable parts of the device so it can never hurt to be overly cautious and replace both of them. Unfortunately there's always a cost involved
Let us know how you get on...
Hi the cable is not the only thing that can couse your screen to not respond, ive seen a tp2 that stoped responding because IT captured humidity in the digitizer screen, you can tell if this is the case by mooving your phone under the sun light and you will notice a kind of rainbow loking transparente spot, this humidity causes the digitizer screen to get stuck, the Solution can be to let it dry in the sun, or to rub it jently against your leg, the fricción can help to dry out the humidity, hope IT helps.
Search on here "tp2 screen not responding"
There is a thread on here I found about the screen not responding, and cleaning around the chrome edge with something thin, carefully, (I used my fingernail, which worked, but I lifted the contact too much down by the buttons on the bottom of screen). Worked for me and a few others. Good luck.

[Q] Screen remains static when keyboard is slid in

Hi
I bought a new RHOD100 and am running Stock WinMo 6.5. First few days the phone worked beautiful. But about a week of usage landed me in this condition.
The screen only lights up with the keyboard is out and not tilted. Other than that, if it's slid in (portrait mode) or when it is tilted up, the screen freezes to whatever it was like when the keyboard was slid out. The touch functions work, I can hear screen tap sounds, and if I click on the right icon things open and close too, but the display remains frozen until I slide out the keyboard and/or undo the tilt.
Any ideas how to fix this? Is that hardware or software?
I have never dropped it, nor exaggerated the tilting.. Can it be the Flex cable?
Definitely hardware... almost 99.99999999% sure this issue is hardware.
I'm betting it is indeed the flex cable. If you're feeling brave, you can attempt to take the phone apart and see if you can find the issue - keep in mind, this is very delicate and tedious work. Need a steady/careful hand and a lot of space! Good tools help too .
http://www.ifixit.com/Device/HTC_Touch_Pro_2
http://www.ifixit.com/Guide/Installing-HTC-Touch-Pro-2-Display-Screen/5546/1

Display Graphic problem

I've got a problem with a OneX I'm trialling for work.
This is a stock device with the latest OTA update applied. I installed Good for Enterprise, activated it, and got my work emails. I opened a PDF attachment which opened for a couple of seconds then the display glitched.
The attached images show what I mean. The display is glitched for every screen. Soft resetting the phone was okay until it started again a couple of minutes later.
Soft resetting a 2nd time was where my real problems started. The phone vibrated as it started, but the display stayed dark. If I tap the power, the touch buttons light up. If I go through the motions of the lock ring and my gesture lock, I feel vibrations of my actions but can't see a thing. If I ring the phone, it rings, the touch buttons light up and the LED blinks. The display stays dark at all times.
Does anyone have any idea what's going on here? It's almost like when a graphic card overheats in a PC.
I would try a hard reset, see what that does, it should fix it as it looks like software problem
Squeeze your phone between thumb and forefinger (on the screen and rear cover) about 1.5-2cm in from the USB port, and slightly below. Let us know if the screen comes back on.
ZenithUK said:
I've got a problem with a OneX I'm trialling for work.
Click to expand...
Click to collapse
I think your phone is on drugs.
Seriously though, that's the scariest gfx bug I've seen on a phone.
Work were just as surprised as everyone else.
It's been sent back to them so they can talk with Vodafone about just what's happened with it.
In the few days I had it, it's a decent phone. The primary reason for considering the OneX is the screen size, and the fact you can read a PDF clearly on it.
ZenithUK said:
I've got a problem with a OneX I'm trialling for work.
This is a stock device with the latest OTA update applied. I installed Good for Enterprise, activated it, and got my work emails. I opened a PDF attachment which opened for a couple of seconds then the display glitched.
The attached images show what I mean. The display is glitched for every screen. Soft resetting the phone was okay until it started again a couple of minutes later.
Soft resetting a 2nd time was where my real problems started. The phone vibrated as it started, but the display stayed dark. If I tap the power, the touch buttons light up. If I go through the motions of the lock ring and my gesture lock, I feel vibrations of my actions but can't see a thing. If I ring the phone, it rings, the touch buttons light up and the LED blinks. The display stays dark at all times.
Does anyone have any idea what's going on here? It's almost like when a graphic card overheats in a PC.
Click to expand...
Click to collapse
Mine looks exactly the same once Ive had a few whisky's...
I had the exact same problem, so I shipped off my phone to service.
They actually changed the whole motherboard. I got my phone back 2 days ago, and it is working better than ever. Even better than before they changed the board.
My guess; Same problem as me. Busted motherboard. Im waiting to get a reply from the service guys that fixed my phone, so I can get some solid answers about what was actually wrong.
Hope this helps!
Best regards,
Sebastian

Screen too dim, backlight(Maybe) not working.

Hi all. I have a rather weird issue. After droping(oops) my phone, I ordered a new lcd. I shelved the phone as it was unusable until the screen arrived. When the screen arrived, I saw that the battery was dead. I charged it and changed the lcd. That's for the backstory. Fast forward to now. When I open the phone, the screen lights up at full brightness as one would expect at the android one logo. It stays there at full brightness for about 8secs But as soon as it starts loading android the screen dims to absolute dark. In the beginning I thought the phone was closing, you can't see anything... Unless you close the lights.
But even in absolutely dark room, the screen is still very dim, barely discernible. The phone works absolutely fine otherwise, touch camera sound etc. I backtracked the process and put it's original screen on, but it does the same.
I tried disabling auto brightness it does nothing. In fact, changing brightness from the slider does absolutely nothing whatsoever.
Tried calibrating the sensors from the engineering menu(not sure it was called that, the one you enter when you put numbers on the call menu) they seem to be working, but the brightness doesn't change.
Tried removing the battery for a prolonged amount of time (around 6 hours iirc). Still same.
At this point i'm thinking:
1)Software problem. I will really need to hard reset the whole thing, which i'd rather not, and hope for the best.
2)Bad screen, which doesn't explain why the previous one has the same problem, or why the screen works during the logo.
I hope I was able to give enough info. Any help would be greatly appreciated. Thanks!
Hi, I'm having almost the same issue (display very dim, but for me it is always very dim) and this manifested not after any dropping or screen replacement, I guess I just wrongly inputed a button sequence that configured the mobile in this weird status. It is really annoying as it is almost impossible to unlock sims, basically the phone is unusable, very frustrating....
Hey there, did anyone found a solution for this issue?
Has anyone solved this problem?
Have you found what was causing this?
I’ve the same issue, replaced the lcd on a xiaomi mi a1 and the backlight is present at the logo startup but completely black after that.[br]
On a dark room I can barely see the screen and all it’s working, but adaptive light button is missing, seems like the bootloader is able to use the backlight but not android itself
I have the exact same problem, i really hope someone knows a solution to this. I tried pretty much anything within my capabilities

Categories

Resources