i have a strange behavior of my hermes.
in the "configure server" settings i had to change the server name from "ds-exchange" to "ds-exchange.<our domainname>.ad".
when syncing it only establishes the isp connection whereas before it also established the vpn connection.
when establishing the vpn connection manually active sync is closing the vpn connection and only uses the isp connection.
when setting back the server name to "ds-exchange" it works well but could not reach the server.
any ideas?
Related
im trying to get an internet connection through my wifi connection. i have done search's and lots of people seem to be asking the same question but nobody has the answer.
at the moment i can access my c: using an application called Resco explorer. but i can not connect to the internet. im not sure what setting i should have on the wifi manger and on my pc. im also using AOL as my isp.
PLS PLS help :lol:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
looks like a no then
I got mine working but setting my wireless network adapter to connect to "Work".
Under Settings>Connections>Tasks>Manage existing connections>Proxy Settings> check the "This network connects to the internet" box
then
Under Settings>Connections>Advanced>Select Networks> "Programs that automatically connect to the internet should connect using:" to "My Work Network" (and the same with one for private network)
Also in your active sync settings, make sure your connection settings allow network (Ethernet) and RAS connections.
From previous research around this, i'm pretty sure you can only use the internet pass through under "WORK" settings only.
*thought i'd better register and contribute as i've gained a fair bit from this forum.
no good anyother ideas. i have searched through hundreds of threads and still no go
help pls
Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings.
i have done this on both my wifi network and my isp network.
still not working
Have you checked if you're getting an IP address from your Wireless Router's DHCP server? Also DNS settings and Gateway address should be there.
You can check this easily by using vxUtil (free )
these are my settings:
tiacxwln1 - tiacxwln compatible wireless
Ip address 192.168.0.2
subnet mask 255.255.255.0
default gateway 192.168.0.1
primary DNS 192.168.0.1
secondary dns
primary wins
seconfdary wins
DHCPs server 192.168.0.1
under serial usb
IP address 192.168.55.101
subnet mask 255.255.255.0
default gateway 192.168.55.100
primary DNS 127.0.0.1
Getting this error when I tried to allow my broadband connection to share with my wifi connection. If I unplug the wifi connection and try and share with another network I don’t get any errors.
Internet connection sharing (ics) cannot be enabled due to IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1 please ensure that no other client on the network is configured to use 192.168.0.1
hmmm ... ever had the same problem. all devices are able to connect to the same router except mine sx66.
then i change the router's channel to '1' .. tada .. now everyone is connected. it might sounds silly, but it worked for me.
try changing your ap wireless channel.
Re: does NE1 have the answer to wifi not connecting to the n
robboy said:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
Click to expand...
Click to collapse
i found the problem with activesync 3.8 and 4.0 somehow, so i reverted back to 3.7, now wifi can sync.
afaik, connecting to internet has nothing to do with activesync. its a direct connection to wifi router. use work location and check the proxy settings if u hv any? (at home i use connect to internet without proxy, at work i use connect to internet with proxy).
Also, for Activsync with wifi, make sure that the WINS server address is that of yr PC u want to sync with.
I am trying the obviously impossible thing:
Connecting my BA (WM 2003 PE) via GPRS (Vodafone Germany) with an exchange server behind a Cisco pix 515e firewall to synchronize my Outlook data.
1. IPsec
Tried all available clients like Antha, Movian and others. No connection is possible with my PDA although a connection with my laptop via a cisco VPN client is possible without any problems. The connection always stucks
with negotiating the security parameters.
2. PPTP
Establishing a VPN tunnel will work over the APN corporate.vodafone.de. But after trying to connect to the exchange server via IE no password login window appears when I am entering the server's IP. After some time IE says "page cannot be found".
Questions:
Is there any workaround available which describes how to connect a WM 2003 PDA via VPN and GPRS to an exchange server ?
Any experiences with Vodafone GPRS and VPN ? Does the APN web.vodafone.de also work for VPN ? Unfotunately Vodafone itself doesn't know !
Any further hints for my problems ?
im using Apani VPN to connect to a Cisco concentrator.
Its the only client I could get to work reliably -& theres a free trial version.
I have been testing most of the WM6 version but impossible to stablish a connection using VPN. I create it but Activesync doesn't connect it. Do you have some problems?
I'm not sure exactly what you are asking but if you are trying to establish a VPN connection to a server through an activesync connection then it isn't a WM6 issue, WM5 won't allow a VPN connection through activesync either.
WM6's VPN does work, you'll need to connect through a wifi or 3G/GPRS connection to use a VPN as activesync won't allow VPN passthrough.
Taz69 said:
I'm not sure exactly what you are asking but if you are trying to establish a VPN connection to a server through an activesync connection then it isn't a WM6 issue, WM5 won't allow a VPN connection through activesync either.
WM6's VPN does work, you'll need to connect through a wifi or 3G/GPRS connection to use a VPN as activesync won't allow VPN passthrough.
Click to expand...
Click to collapse
I didn't explain correctly, sorry. Previously I define at My ISP the gprs connection of my operator, and in My Work Network only the vpn details. Just when activate activesync, the system connect first to the isp and later the vpn.
did you check on wm6 with a vpn connection? what steps to define please?
To use your VPN you'll have to disconnect from activesync and use either your GPRS connection or a wifi connection to connect to your VPN server.
The exceptions only work for specific WM application, for 3rd party applications and (inc the Remote Desktop Mobile app) you'll have to connect manually by navigatinging to your work's settings VPN tab and selecting Connect.
Taz69 said:
To use your VPN you'll have to disconnect from activesync and use either your GPRS connection or a wifi connection to connect to your VPN server.
The exceptions only work for specific WM application, for 3rd party applications and (inc the Remote Desktop Mobile app) you'll have to connect manually by navigatinging to your work's settings VPN tab and selecting Connect.
Click to expand...
Click to collapse
I mentioned Activesync because my corporate mail, based on exchange, uses VPN to autent.
Sorry wasn't quite sure how you were connecting, think I have the icture now.
IT sounds as though your VPN is working okay if You get a connection to GPRS followed by VPN connection.
In that case does your exchange server require SSL for the activesync connection?
If it does then you'll need to use the same name within your activesync configuration as the name entered on the SSL certificate.
Could you please give some more details such as any errors that are generated by activesync and also confirm that you do get a VPN connection during the connection process.
i noticed under connections a VPN area. i added my pptp connection for my work server but how do i dial it so i have a connection? ideally, i'd like to dial the vpn then use tsmobile to connect to my pc's local ip. is this possible? i can connect to the server via tsmobile but that has static outside ip.
i would also like to know how to do this!
I have Desire. Try to create VPN connection to my work net over 3g, GPRS or Wi-Fi. Tunnel creation is succesful. It's working perfect for 15-20 seconds then nothing. No any warnings in Phone. VPN Server says it's OK. But net resources and RDP connections are unavailable. I'm using IPsec/PP2P protocol. Server with Win2k.
Also try to connect to another VPN server (router). Same result in such different situations
Same problem here. Using hideipvpn.com service. No internet connection when connected to vpn
up? Somebody help pls
Old WinMo works excellent but my new Android doesn't want