like i lose connection after going on the white screen?? what do i do?? because i wana get the new htc rom 1.33 and i currently have tmob wm6 which sucks...alot i just need a lil help plz to help me cid unlock it so i can put the new ROM...
and also can someone please help me find the OZ instant messenger cab??...so i can use it on the new htc rom...
On mine where it was supposed to go to the black screen with a low backlight; it went to a white screen with full backlight.
I flashed it from the white screen and it worked.
fiveohhh said:
On mine where it was supposed to go to the black screen with a low backlight; it went to a white screen with full backlight.
I flashed it from the white screen and it worked.
Click to expand...
Click to collapse
yea but the ruu doesnt find the fone it cant find the connection???
Related
Hello folks,
I love my 8525 (Htc Hermes) however the WM6 OS is freezing right at the boot screen? It happend randomly for absolutley no reason. I want to try another ROM or a cooked ROM but I cant even sync this thing as it wont go past the WM6 boot screen, It will still go into the multicolored boot diagnostic screen and that reads:
HERM100
IPL-1.04
HERM100
SPL-2.10.Olipro
appatula said:
Hello folks,
I love my 8525 (Htc Hermes) however the WM6 OS is freezing right at the boot screen? It happend randomly for absolutley no reason. I want to try another ROM or a cooked ROM but I cant even sync this thing as it wont go past the WM6 boot screen, It will still go into the multicolored boot diagnostic screen and that reads:
HERM100
IPL-1.04
HERM100
SPL-2.10.Olipro
Click to expand...
Click to collapse
Get yourself to the multicolored screen and flash a stock ROM. Then you can upgrade from there.
TaurusBullba said:
Get yourself to the multicolored screen and flash a stock ROM. Then you can upgrade from there.
Click to expand...
Click to collapse
Please could you tell me how can I do that?
tnx!
Fernando!
Hello,
I broke my trinity screen and I baught a new screen to a HK seller and i replace it.
I had already flash the firmware (faman 3.6 full) before changing the screen.
So everything seems ok when I put the phone power on but As soon as I put the creen off, I am unable to put it on it appears every time in a complete white screen !!!! to have something on the screen I have to reboot the phone.
I just reflash the phone again with faman 3.6 and it's still the thame problem completly white after turn the screen off then on ...
Can every one help me ?
You may find a solution here:
http://forum.xda-developers.com/showthread.php?t=311180&highlight=white+screen
thank's but i think my problem is différent because i can flash in WM6 it work's until i put it off then on -> it stay white screen ..
So I try whith the method thezy describe but it's doesn't work's have any one have the solution
I would like so much to rum run WM6 for example Faman 3.6
Help ...
Hello,
I have Miphone M88 (WM6.1 Eng)
i flash it whit Rom WM6.0, Now my phone work but now i have a white screen the phone looks like ok but nothing shows in the screen only a white screen what i can do ??
please help me i have a big problem
Thx
I thought that I remember reading somewhere that when you flash your phone it does take quite a while before it's complete, and that the screen does stay white for quite a long time.
Mike
No, I wait until he terminate flashing, and when he reboot it came with screen white,
have you one solution now!!
Thx
I'm sorry I don't, I'm yet to flash my m88.
have you tried taking the battery out and leaving it for 10 minutes, and then entering the boot loader screen again and trying to re-flash?
Mike
I've install ROM from this topic: http://forum.xda-developers.com/showthread.php?t=452848
and now, when I try power on my MiPhone - it show only white screen - please help!
can some help with this?
i have a clone m99 same thing as an m88 i guess the original rom img worked whe i flashed it when i downloaded the new 6.5 and tried flashing that all i did was stay at "downloading image please wait" and thats it. went to lift the phone up and the battery fell out not nothing works at all even with a fuly charged battery i cant even turn this stupid thing on. so im hoping anyone has any insight on what i could try and to to fix this.
p.s. i have left the beatery of for 30 mins and still nothing .....
help i got white screen too ;[ m88 after rom update only white screen and i cant do nothink ;[
I get as far as the reboot to bootloader screen when using a couple of the RUU ROM update exe's, the phone reboots into the black screen with the HTC logo and sits there, then a minute or two later the RUU exe times out with a 171 USB connection error.
If I remove the USB cable, I get the white screen with the skateboarding androids with the same sort of blurb at the top as the bootloader screen, but the only option is it says RUU but doesn't do anything if I push the power button like you do to select stuff from the bootloader screen; HBOOT 0.92.0001 seems to be the only line of interest there.
If I plug the USB cable back in it goes back to the black HTC logo screen.
If I remove the battery then I can reboot back to my old 2.2 WWE ROM.
Any ideas how to get over this little obstacle? I am using a goldcard and it's a debranded phone.
Cheers,
Joe
Bump. Anyone?
When it stuck on black htc screen, don't touch the phone.
Run the ruu again...
You can google error 171 to find the answer.
Dude I've searched the 171 and found many possible answers but nothing consistent. Do you know what the secret is to getting round it?
The most common opinion is ruu has some problems running under win7/vista.
Hello,
first, i read the troubleshooting guide with slcd and blackscreen.
Ok, i got an Desire which shows while starting just the htc logo on white screen. I thought installing an RUU would fix this.
I am not allowed to post a link jet... The RUU is called Ruu-Desire 2.3 GB update.exe
This is the RUU i installed, in another forum it was sayd, that this would work on every phone except t-mobile branded. Mine is vodafone branded.
The RUU stopped at 59% upgrading the recovery.img and completey exitted. The phone shut down and remains black.
Before the RUU it was on version 2.29.62.2, or something like that.
Now it does not start in fastboot or hboot. Remains black and adb/fastboot does not recognize any phone.
So, is there a way to get it back to life?
Greetings
b14ckroses said:
Hello,
first, i read the troubleshooting guide with slcd and blackscreen.
Ok, i got an Desire which shows while starting just the htc logo on white screen. I thought installing an RUU would fix this.
I am not allowed to post a link jet... The RUU is called Ruu-Desire 2.3 GB update.exe
This is the RUU i installed, in another forum it was sayd, that this would work on every phone except t-mobile branded. Mine is vodafone branded.
The RUU stopped at 59% upgrading the recovery.img and completey exitted. The phone shut down and remains black.
Before the RUU it was on version 2.29.62.2, or something like that.
Now it does not start in fastboot or hboot. Remains black and adb/fastboot does not recognize any phone.
So, is there a way to get it back to life?
Greetings
Click to expand...
Click to collapse
hmm strange one.. pull the battery out then put back in then press power button. does it vibrate as if it turned on? also with the phone off, plug in the charger, does the LED come on?
led none, vibrate no
no, led remains black and no vibrate on power button :/
you think this is a hardbrick?
b14ckroses said:
no, led remains black and no vibrate on power button :/
you think this is a hardbrick?
Click to expand...
Click to collapse
Had this issue 2 months ago, it was motherboard fault....sent the phone to htc for warranty and they solved it
The problem is I do not know how old the phone is and if it still is in warranty time :/