Exchange Server problem!!!PLEASE HELP!!! - HTC Excalibur

I just loaded the new 1.33 rom for my Dash and i am unable to syncronize my Outlook mail to the microsoft exchange server at my job, it was working fine with my tmo 1.22 rom. I keep getting support code 0x85020006. I have checked my connection settings....Any ideas anyone???

No clue dude. It works for me.

You might want to double check how your connection settings are configured.
Do any other internet apps work?

ok. i figured it out. I looked at the tmo 1.22 configuration settings and compared it to the 1.33.

Was it pilot error or a hard reset fix?

it was more like a pilot error...in the t-mobile rom there is a "set up my email" shortcut on the homescreen that sets up outlook automatically...it turned out to be that the new rom doest have that function so you have to do it manually...i got the set-up off this site here....http://www.tyic.com/mobile-cell-pho...s-internet-is-over-error-502-bad-request.html

Related

Microsoft Direct Push

Has anyone been able to get direct push working on WM6? I am looking for a way to get email faster than every 15 mins. I cant use BB Connect because it does not support attachments (jpg, pdf, mp3). I need something that does.
Any suggestions?
Yeah, works great. Not much of an update from WM5 though, unless you're using Exchange 2007 (which I'm not).
Works fine for me also..
Yup working here as well from my Exchange - 2003 so no HTML mail over DP yet.
is there a link to download (I looked in the wiki)? Can someone send me the CAB.
Does it support all file types?
There's nothing to download as directpush is built in to wm5 roms (post AKU2) and WM6 roms.
BUT you either need to have an exchange server 2003 sp2 account (or exchange 2007 !) or you can rent one. There's free ones but they're not that great. If you want a really good hosted solution - try 4smartphone.com
I keep getting sync errors with this version. It allows me to set it up, but direct push does not work. I set it up for 5 minutes and it syncs fine. When I plug it into the laptop, it gives error messages that it cannot find the server, but it syncs. This is strange.
Works great for me as well ! Have no problems at all !
Have you tried Emoze
http://www.emoze.com/en/download/De...cket+pc&OVKEY=update+pocket+pc&OVMTC=advanced
Pumpiron579 said:
Have you tried Emoze
http://www.emoze.com/en/download/De...cket+pc&OVKEY=update+pocket+pc&OVMTC=advanced
Click to expand...
Click to collapse
I will check it out. But it seems like the computer has to always be on. Thanks for the recommendation.
thuggin said:
I will check it out. But it seems like the computer has to always be on. Thanks for the recommendation.
Click to expand...
Click to collapse
Check out the link in my sig for free exchange accounts.
Direct Push not working in WM6 LVSW
Direct Push is not working for me either - WM6 LVSW Pro (Cingular) - Exchange 2003 sp2
All of my Exchange information syncs perfectly, then I get an error message:
"Your current sync schedule requires a cellular data connection. Please setup a cellular data connection as described in online Help or change the sync schedule."
Support Code: 0x85020013
The only way I can get emails while using "as items arrive" setting is to force send/receive. I have been using Direct Push on Exchange 2003 sp2 for almost a year with no problems, and there is no way I can go back to every 5 minutes.
I noticed some people are having the same problem on WMXL 2.0 Even using the Fit4cat solution mentioned in that post did not work.
I did setup My ISP settings using this Cingular CAB file . Could that have something to do with the problem?
njmarchetti said:
Direct Push is not working for me either - WM6 LVSW Pro (Cingular) - Exchange 2003 sp2
All of my Exchange information syncs perfectly, then I get an error message:
"Your current sync schedule requires a cellular data connection. Please setup a cellular data connection as described in online Help or change the sync schedule."
Support Code: 0x85020013
The only way I can get emails while using "as items arrive" setting is to force send/receive. I have been using Direct Push on Exchange 2003 sp2 for almost a year with no problems, and there is no way I can go back to every 5 minutes.
I noticed some people are having the same problem on WMXL 2.0 Even using the Fit4cat solution mentioned in that post did not work.
I did setup My ISP settings using this Cingular CAB file . Could that have something to do with the problem?
Click to expand...
Click to collapse
I'm using the same CAB file and syncing with Exchange Sp2 and it works fine with WM6 LVSW...
@ DenaiL
After using that CAB, did you have to go in and manually enter username/password into the Cingular GPRS connection?
I still had to go in and enter this information.
njmarchetti said:
@ DenaiL
After using that CAB, did you have to go in and manually enter username/password into the Cingular GPRS connection?
I still had to go in and enter this information.
Click to expand...
Click to collapse
Nope, it just worked...as is.
Hard Reset > Redownloaded and reinstalled the CAB from your sig. Now Direct Push is working. Thank you!
For some reason the first time I downloaded and installed the cab it did not setup my connection properly.
Now I can go to sleep.
Does this direc push use alot of data. I am on a 500mb monthly plan (crap i know) but HSDPA is so expensive in AU (telstra, nextg).
Shaun33 said:
Does this direc push use alot of data. I am on a 500mb monthly plan (crap i know) but HSDPA is so expensive in AU (telstra, nextg).
Click to expand...
Click to collapse
Depending on the network, directpush itself uses between 5 and 15mb a month - just for the heartbeat and occasional syncs. If you set your email to sync only first 5kb and no big attachments, you should be able to keep the actualy email traffic down.
I have Orange's unlimited (with a 1gb FUP) and use only 100 or so mb each month all in.
njmarchetti said:
@ DenaiL
After using that CAB, did you have to go in and manually enter username/password into the Cingular GPRS connection?
I still had to go in and enter this information.
Click to expand...
Click to collapse
Same problem here so I just enter everything manaully..
Messaging and Security Feature Pack
Question: I need to get the Messaging and Security Feature Pack
My understanding this can be integrated into the ROM. Is this correct? Any chance of getting this to work with WM6?
Push is working but encrypted mail does not synch and addon does not install with message Feature and Security Pack not installed. Any Ideas?
Thanks

HTC WM6 ROM and BBConnect almost perfect

Ok so I have BBConnect .91 running on my DASH with the HTC WM6 ROM stable but am not able to use the BB connection for the other programs ie, live search, etc can someone please let me know what settings need to be set to enable other apps access to the data???
A proxy or something
not possible, mail only
I got MMS working, I entered some apn settings but haven't been able to test yet.
well it does work, when you install the bbconnect v.91 and configure the device it installs the bb browser and that enables the web browsing, also if you add the mms settings it connectes and stays connected to bb as well......

Yahoo! Mail Issues

I really have no idea what the problem is here. I used to be able to send emails fine when I had WM 6.0 installed. I upgraded to 6.1 which automatically found imap settings for Yahoo Mail. This was working fine to send emails until recently.
Now I cannot seem to send emails at all but I can recieve them fine over imap. My phone (T-Mobile Vario II) doesn't seem to want to allow me to set up Yahoo Mail using the POP protocol; it automatically defaults to IMAP and gives me no option. I'm using Pays WM 6.1 ROM (build 3.05) if that makes any difference to anyone.
It's getting very frustrating not being able to send emails when I've just read an urgent one I've received!
Current settings are:
Incoming: imap.mail.yahoo.com
Outgoing: smtp.mobile.mail.yahoo.com (with authentication)
(No SSL on either server)
I don't seem to be able to find the port numbers.
Any help much appreciated!
thats the same settings i have and mine works, double check that the proxy is not enabled if you are using media net.
I had the same issue with CRC's rom. I'm lazy, so here is what I did:
1. Delete the account you created (imap).
2. Create a new account, but on the email field write something like [email protected] ...etc. (i.e. mispell yahoo)
3. Now it will ask you to setup the account manually, i.e. Internet mail, POP3, etc.
I use:
incoming -> pop.mail.yahoo.com:110
outgoing -> smtp.mail.yahoo.com:25 (Required SSL)
Hope this helps.
Many thanks dgaud007,
I hadn't thought of that and so obvious as well. Will be trying that immediately!
im having this same issue since goin to 6.1 on a Dash. Tried the yaho.com suggestion elow but it still won't always send.
Any ideas?
dom_mitchell1 said:
I really have no idea what the problem is here. I used to be able to send emails fine when I had WM 6.0 installed. I upgraded to 6.1 which automatically found imap settings for Yahoo Mail. This was working fine to send emails until recently.
Now I cannot seem to send emails at all but I can recieve them fine over imap. My phone (T-Mobile Vario II) doesn't seem to want to allow me to set up Yahoo Mail using the POP protocol; it automatically defaults to IMAP and gives me no option. I'm using Pays WM 6.1 ROM (build 3.05) if that makes any difference to anyone.
It's getting very frustrating not being able to send emails when I've just read an urgent one I've received!
Current settings are:
Incoming: imap.mail.yahoo.com
Outgoing: smtp.mobile.mail.yahoo.com (with authentication)
(No SSL on either server)
I don't seem to be able to find the port numbers.
Any help much appreciated!
Click to expand...
Click to collapse
Win Mobile has always auto configured my Yahoo! account to IMAP (which I am pretty happy about anyway)... That said, I'm using a yahoo.co.uk account.. Don't know whether it applies to yahoo.com accounts..
I have tried using the Auto Configure and tried configuring it manually. Still cannot send about half of the time. Very weird because it always worked fine until I went to the 6.1 ROM.
dapopa9 said:
I have tried using the Auto Configure and tried configuring it manually. Still cannot send about half of the time. Very weird because it always worked fine until I went to the 6.1 ROM.
Click to expand...
Click to collapse
From what I read in one of the Kaiser threads from incognito there was a brief mention of a bug in the 6.1 builds were about 1/2 of the time the logon authorization fails. It has happened to me even on the new 19213 version. I don't know how to fix it at this point (if it's something that can be done after the ROM is cooked). I'm using PAP authentication for now, and so far, haven't seen the issue again.
I'm still having this same issue. Anyone else? Any ideas on how to make Yahoo! outgoing email work with Kavana's 6.1 ROM?
bump message
dgaud007 said:
incoming -> pop.mail.yahoo.com:110
outgoing -> smtp.mail.yahoo.com:25 (Required SSL)
Hope this helps.
Click to expand...
Click to collapse
no, because that's not IMAP
dom_mitchell1 said:
Incoming: imap.mail.yahoo.com
Click to expand...
Click to collapse
How can I get IMAP working again?
I have recently installed Windows Mobile 6.5 on Kaiser. I was able to access yahoo mail for some time but now I can not both send and receive mails. I have also tried the method incoming -> pop.mail.yahoo.com:110
outgoing -> smtp.mail.yahoo.com:25 (Required SSL) and it is also not working. I have recently installed G-Profile and 3G Dialer may be they have caused the problem.

GMail doesn't work....WM6.1

I was setting GMail on tmail (IMAP) setting and doesn't work....
system said:
Error
Your internet connection is not configured properly.
Please Verify your setting in Connections.
I got Tmobile WEB 5.99...Could be thats the problem?
adavid said:
I was setting GMail on tmail (IMAP) setting and doesn't work....
system said:
Error
Your internet connection is not configured properly.
Please Verify your setting in Connections.
I got Tmobile WEB 5.99...Could be thats the problem?
Click to expand...
Click to collapse
Go to messaging\Setup E-mail and just use automatic setup and it will connect via POP3.
Doesn't work POP3 either, I did it before and nothing....I was searching on internet and most of peoples said that use IMAP4 but nothing....
I'd like if anyone that has proxy 5.99 TMO has been configured GMAIL on WM6.1
What server are you using guyz???
I have gmail setup on kavana's 6.1 rom also using tzones 5.99 for internet. works fine. Im just using the regular pop and smtp settings
What option do you have for the server...Internet?
with that doesn't work mine and I change for: T mobile MMS, T mobile Data, work....doesn't work either
I have mine set to work.
I have the same problem. I have the unlimited plan and I get the "connection error" and I it asks for my login and password over and over. I only have this problem with 6.1. I have tried the T-mobile email plugin, and the other 3 ways of adding an email account.
Wierd thing is, I backed up my 6.0 data before the swap to 6.1 with Sprite backup. When I restore to the 6.1 I get me email back and it works fine, problem is that it really screws up most of the stuff I got with 6.1.
I also have the same issue.
My Yahoo and Gmail worked fine on 6.0.
6.1 Yahoo refused to work until just the other day...It has not worked since the 6.1 install until now...
Gmail will not work either no matter what... It did download the headers, but it shows nothing and will not work otherwise...
if you guys want tell me the screens you need and ill get you the settings that work for me.
I tried a lot of option and nothing guys, let see what I do....I did POP & IMAP and nothing..I tried Yahoo and doesn't work either instead they work fine through IE.
I did it POP as default and "works" sometimes, when you click on send/receive gave you the Connection ERROR....and when the system did by itself work good ( I think)...
ERROR....." The remote party has ended this connection"...
I go a new messajw
"The remote party has ended this connection"....
Does anyone has this message before?
just out of curiosity do you have pop turned on thru gmail?
Off course....
And I have setting up to "work" too
When I push (send/receive) gave that error...
Only download automatically messages twice when it's wants....
What do you recommend me to do?

Touch Pro 2 and gmail

I have had my TP2 for a few days now and i love it, except for the fact that I cannot send or receive email from my gmail account
I can access the internet fine, and use the youtube app fine, but whenever i try to send an email or hit send/receive i get this error message
"CANNOT CONNECT WITH CURRENT CONNECTIONS SETTINGS. TO CHANGE YOUR SETTINGS, TAP SETTINGS"
When i set up the email the only things i was required to supply were my email address and password....so i am assuming the problem lies with the way my handset is trying to access the gmail account, ie. trying to use wifi or something? (i dont have wifi, so i will only be using the "unlimited" interent provided with my t-mobile UK tariff)
has anyone else had this problem or do they know how to get around it as i have finally got myself a decent handset where i can (allegedly!) check my email on the move, but yet i somehow cant get it working?!!
Ihave tried both hard and soft resets to get this sorted but it just wont work and i feel like pulling my hair out!
n
I know it's not much consolation but it just worked for me...
I have a SIM free TP2 and UK T-Mobile Web'n'Walk.
Incoming mail server is imap.gmail.com
Account type is IMAP4
Username is my full gmail username
Outgoing mail server is smtp.gmail.com
outgoing server requires authentication is ticked
All this was set via automatic configuration.
Hope this helps,
Richard
This is what i have done to recieve and send Gmail trueout the standard email client on my Pro II.
First of all you have to enable imap at your gmail account which you can find under settings.
Then on your phone do the following settings.
- make an new account in your email client
- fill in your gmail adress
- fill in your name
- fill at incomming mail "imap.gmail" and account type "imap"
- fill in your account name (gmail adress) and password
- fill at outgoing mail server smtp.gmail.com
and those two checkboxes must be checked
- auto recieve and send is up to you
hope this will help you
ther's a known bug in windows mobile poutlook...
sometimes the autoconf for gmail doesn't work...(i had the same issue on my omnia)
you only need to enter the account details by hand..
to do that, in the first screen where your address is asked, enter [email protected]
leave it without the final m.
after that fill in manually all the account details, then when finished edit the account and put that m in the domain...
that should work...at least in my omnia was the only way to get gmail working...
I used this guide en it works perfectly
http://mail.google.com/support/bin/answer.py?answer=78886
hi, thanks or all the replies, most appreciated.
however, i have now established that i can get my gmail account working - but only over wifi!?!? when the wireless router is turned off i get the same message as before, so there must be a setting or something that is telling my TP2 to look for a wireless connection when performing a send/receive, rather than using the "internet" (if thats the right term) that is included in my contract..AAAARGH...
i have had a look but cannot find any settings for this so i must be going mad?
can anyone shed any light on this for me before i go mad??!!
quasar99 said:
hi, thanks or all the replies, most appreciated.
however, i have now established that i can get my gmail account working - but only over wifi!?!? when the wireless router is turned off i get the same message as before, so there must be a setting or something that is telling my TP2 to look for a wireless connection when performing a send/receive, rather than using the "internet" (if thats the right term) that is included in my contract..AAAARGH...
i have had a look but cannot find any settings for this so i must be going mad?
can anyone shed any light on this for me before i go mad??!!
Click to expand...
Click to collapse
Disable proxyserver, don't have the place where you can find this. I have a dutch rom
I have a gmail imap connection on my HTC Touch that was working great but has failed to connect for the past two hours or so.
I found that to change from Download 30 Days to 7 days and it worked fine.
Oddly I returned my TP2, and switched back to my VarioV, same problem (had worked fine until then). New TP2 is now here, so will start with 7 days and try expanding to 30 days later.
chillaxx said:
Disable proxyserver, don't have the place where you can find this. I have a dutch rom
Click to expand...
Click to collapse
does anyone know how to do this? i cannot find this option anywhere?
is there any way i can see how my tp2 is trying to receive data from my gmail account, ie. if it is trying to use internet or wifi?!?
also, does anyone have any details for the settings that their tp2 (on t-mobile UK) is using when trying to retrieve email (not by wifi)??!
i'm also assuming that t-mobile wont be able to help me as i got my phone/contract via a third party and t-mobile themselves dont seem to stock the phone themselves....
I had this problem, it drove me nuts until I worked out what it was, if i was already connected it would work but it would not establish its own new connection.
To fix it go into the email settings for the account, then select:
Edit Account Setup
Next
Next
Next
Next (Outgoing (SMTP) mail server screen)
Click the “Advanced Server Settings” Link
In the “Network connections” it defaults to “The Internet” but if you have gone through the “Connection Setup Wizard” when you first installed your SIM it renames the connection, in my case to “T-Mobile Internet”.
Change “Network Connections” to the correct one i.e. “T-Mobile Internet”
hey presto, you can now get your emails
hope this helps everyone
nlhall said:
I had this problem, it drove me nuts until I worked out what it was, if i was already connected it would work but it would not establish its own new connection.
To fix it go into the email settings for the account, then select:
Edit Account Setup
Next
Next
Next
Next (Outgoing (SMTP) mail server screen)
Click the “Advanced Server Settings” Link
In the “Network connections” it defaults to “The Internet” but if you have gone through the “Connection Setup Wizard” when you first installed your SIM it renames the connection, in my case to “T-Mobile Internet”.
Change “Network Connections” to the correct one i.e. “T-Mobile Internet”
hey presto, you can now get your emails
hope this helps everyone
Click to expand...
Click to collapse
if the connection has a proxy in the setup, than you can use that connection only if selected like above...
if you leave "The internet" the proxy settings are ignored...you have to select the exact connection..but this will prevent the gmail to connect with wifi

Categories

Resources