Yahoo! Mail Issues - 8525, TyTN, MDA Vario II, JasJam ROM Development

I really have no idea what the problem is here. I used to be able to send emails fine when I had WM 6.0 installed. I upgraded to 6.1 which automatically found imap settings for Yahoo Mail. This was working fine to send emails until recently.
Now I cannot seem to send emails at all but I can recieve them fine over imap. My phone (T-Mobile Vario II) doesn't seem to want to allow me to set up Yahoo Mail using the POP protocol; it automatically defaults to IMAP and gives me no option. I'm using Pays WM 6.1 ROM (build 3.05) if that makes any difference to anyone.
It's getting very frustrating not being able to send emails when I've just read an urgent one I've received!
Current settings are:
Incoming: imap.mail.yahoo.com
Outgoing: smtp.mobile.mail.yahoo.com (with authentication)
(No SSL on either server)
I don't seem to be able to find the port numbers.
Any help much appreciated!

thats the same settings i have and mine works, double check that the proxy is not enabled if you are using media net.

I had the same issue with CRC's rom. I'm lazy, so here is what I did:
1. Delete the account you created (imap).
2. Create a new account, but on the email field write something like [email protected] ...etc. (i.e. mispell yahoo)
3. Now it will ask you to setup the account manually, i.e. Internet mail, POP3, etc.
I use:
incoming -> pop.mail.yahoo.com:110
outgoing -> smtp.mail.yahoo.com:25 (Required SSL)
Hope this helps.

Many thanks dgaud007,
I hadn't thought of that and so obvious as well. Will be trying that immediately!

im having this same issue since goin to 6.1 on a Dash. Tried the yaho.com suggestion elow but it still won't always send.
Any ideas?
dom_mitchell1 said:
I really have no idea what the problem is here. I used to be able to send emails fine when I had WM 6.0 installed. I upgraded to 6.1 which automatically found imap settings for Yahoo Mail. This was working fine to send emails until recently.
Now I cannot seem to send emails at all but I can recieve them fine over imap. My phone (T-Mobile Vario II) doesn't seem to want to allow me to set up Yahoo Mail using the POP protocol; it automatically defaults to IMAP and gives me no option. I'm using Pays WM 6.1 ROM (build 3.05) if that makes any difference to anyone.
It's getting very frustrating not being able to send emails when I've just read an urgent one I've received!
Current settings are:
Incoming: imap.mail.yahoo.com
Outgoing: smtp.mobile.mail.yahoo.com (with authentication)
(No SSL on either server)
I don't seem to be able to find the port numbers.
Any help much appreciated!
Click to expand...
Click to collapse

Win Mobile has always auto configured my Yahoo! account to IMAP (which I am pretty happy about anyway)... That said, I'm using a yahoo.co.uk account.. Don't know whether it applies to yahoo.com accounts..

I have tried using the Auto Configure and tried configuring it manually. Still cannot send about half of the time. Very weird because it always worked fine until I went to the 6.1 ROM.

dapopa9 said:
I have tried using the Auto Configure and tried configuring it manually. Still cannot send about half of the time. Very weird because it always worked fine until I went to the 6.1 ROM.
Click to expand...
Click to collapse
From what I read in one of the Kaiser threads from incognito there was a brief mention of a bug in the 6.1 builds were about 1/2 of the time the logon authorization fails. It has happened to me even on the new 19213 version. I don't know how to fix it at this point (if it's something that can be done after the ROM is cooked). I'm using PAP authentication for now, and so far, haven't seen the issue again.

I'm still having this same issue. Anyone else? Any ideas on how to make Yahoo! outgoing email work with Kavana's 6.1 ROM?

bump message

dgaud007 said:
incoming -> pop.mail.yahoo.com:110
outgoing -> smtp.mail.yahoo.com:25 (Required SSL)
Hope this helps.
Click to expand...
Click to collapse
no, because that's not IMAP
dom_mitchell1 said:
Incoming: imap.mail.yahoo.com
Click to expand...
Click to collapse
How can I get IMAP working again?

I have recently installed Windows Mobile 6.5 on Kaiser. I was able to access yahoo mail for some time but now I can not both send and receive mails. I have also tried the method incoming -> pop.mail.yahoo.com:110
outgoing -> smtp.mail.yahoo.com:25 (Required SSL) and it is also not working. I have recently installed G-Profile and 3G Dialer may be they have caused the problem.

Related

Exchange SP2 Push Mail Providers

Hi all,
Just upgrading to new Imate ROM. Now it seems that Universal has push email can anyone recommend an Exchange SP2 direct push email provider for consumer market? Many thanks for taking the time to read.
Tom C (UK) :lol:
The onlyone I know for the moment is 4smartphone.net - if you find any better (means cheaper), let me know!
Some report are saying 4smartphone.net takes 30 seconds to push an email to your device, rather than 5 seconds or less that others are getting via their own exchange servers.
Its worth asking these website exchange account providers what frequency they run the push 'heartbeat' at - you might end up with a big bill if they haven't set the Exchange/firewall to a reasonable rate.
Device SMS Address
I've just signed up for the 4smartphone trial, but Orange are completely unable to tell me what the Device SMS Address should be. They don't have a clue what this is about. I was guessing [email protected], but that doesn't work.
Does anyone know what it should be?
Re: Device SMS Address
rossp said:
I've just signed up for the 4smartphone trial, but Orange are completely unable to tell me what the Device SMS Address should be. They don't have a clue what this is about. I was guessing [email protected], but that doesn't work.
Does anyone know what it should be?
Click to expand...
Click to collapse
If you're using the aku2 rom then you don't need an sms address. The MSFP/Direct Push works via http not sms. Waaaaaay better!
Settings
I think it is that version. I'm using the new ROM version 1.30.68 with Radio version 1.09.00. I can see the push mail icon in Comm Manager, but it's greyed out, so I'm not sure where to go from here. The 4smartphone support pages are not exactly informative.
Can anyone point me to a website about setting this up? My searches are not getting me far.
Thanks.
Re: Device SMS Address
jdee246 said:
rossp said:
I've just signed up for the 4smartphone trial, but Orange are completely unable to tell me what the Device SMS Address should be. They don't have a clue what this is about. I was guessing [email protected], but that doesn't work.
Does anyone know what it should be?
Click to expand...
Click to collapse
If you're using the aku2 rom then you don't need an sms address. The MSFP/Direct Push works via http not sms. Waaaaaay better!
Click to expand...
Click to collapse
Is the AKU2 ROM available?
Where?
Thanks
Steve
Its a test aku2 universal rom...
http://forum.xda-developers.com/viewtopic.php?t=42743
Got it working
Just need to ignore the instructions on the 4smartphone web page about SMS Device.
From the moment of clicking send on my Desktop to the email arriving in my device inbox the time taken is about 25 secs, which includes gmail forwarding it to the 4smartphone address.
4smartPhone Help!!
Glad to hear that you got the SMS problem sorted which help me out too. I can now sync with contacts but what do I do for the email. Do I have to set an account up on WM5 which I have done but there is no push coming through I have to manually send and receive. Any help much welcome. Thanks
You need to set it up using active sync in WM5. You will need to add a server (secure.4smartphone.net) then your username, password and domain (4smartphone). It will then sync using the GPRS connection.
I've got Outlook desktop, Outlook Web Access (with smartphone) and Outlook on WM5 all synchronizing nicely. My only problem is that I have three pop email account on Outlook desktop, but 4smartphone only seems to work with one.
And just to add the obvious, you need to have email being forward to the address that you got @smartphone.com
Re: Device SMS Address
rossp said:
I've just signed up for the 4smartphone trial, but Orange are completely unable to tell me what the Device SMS Address should be. They don't have a clue what this is about. I was guessing [email protected], but that doesn't work.
Does anyone know what it should be?
Click to expand...
Click to collapse
4Smartphone.net are US based, where email to SMS is very common. It took the Americans about three years to wake up to the fact that everyone else in the world has to pay for SMS messages to be sent - hence the new push technology from Microsoft.
What they are referring to is a feature known as AUTD (always up to date) which is how Exchange used to do push. A specially created SMS text message would be sent to your phone which told your device that something had changed, and it would then do a sync.
I am told that it worked very well - it is just unfortunate that for everyone outside of the USA the feature would cost many thousands to run for each single user.
Simon.
4smartPhone Help!!
Thanks for your quick reply. I have forwarding set up and all the correct settings for Active Syn in WM5, UserName, Password, Domain and Save password. Under the Options in ActiveSync there now appears and Exchange Server with the following selected Contacts, Calendar, E-Mail, Tasks.
I'm still not sure though what to do with the email all the above are syncing via 3g. In the Messages section do I have to create a new account and if so what are the correct setting for this?
Thanks again for the help and suggestions.
Tom C.
When it syncs with the Exchange server it automatically goes into the Outlook email inbox on your device. If you've previously been synchronizing with the desktop it wipes out those emails, which is why I'm trying the Pro version of 4smartphone and synchronising all three.
Have you checked if test emails you are sending are reaching the 4smartphone email address? You can do that by logging into the web version of Outlook via the link on their website.
Also the push email icon in Com Manager should now be working and it will say Microsoft DirectPush at the top.
That may not be much help, but I am also completely new to this.
4smartPhone
Once again thanks for the help. Just about got it sorted as I read your reply. The missing link for me is that the you don't have to sent up a seperate email account I was looking for server addresses extra but all those go under ActiveSync. Getting mails fine now but not too sure yet about sending them. Are yours sending fine or is there a delay?
Thanks again, you are still once step ahead of me
I've got Push email working with mail2web.com and have a few questions:
I've gota couple of email addresses that won't forward to my mail2web email account and I don't really want to use mail2web's harvester as that only checks once every hour, so I was wondering whether it's possible to set Outlook on my PC to synce with my mail2web account so that my PC will download emails from my POP accounts, then upload them to my mail2web server, which then pushes the emails to my phone?
Or is there a simpler way to do it?
Also, when I reply to an email that's been pushed the reply address is always my mail2web email address, which is a pain as it confuses people and gets rejected by my email groups. How can I change the default address that my replies go from, or even just change them on each email as I reply?
I'm sure I'll have more questions soon.! Cheers.
paulrockliffe said:
Or is there a simpler way to do it?
Also, when I reply to an email that's been pushed the reply address is always my mail2web email address, which is a pain as it confuses people and gets rejected by my email groups. How can I change the default address that my replies go from, or even just change them on each email as I reply?
Click to expand...
Click to collapse
Yup, use 4smartphones.net.
IT'S FOUR QUID A MONTH!
HI
i m using tmobie mda (usa) with the data plan and with the i can configure my pop3 email account on my phone and make to get the emails automaticaly after certain time
so then why do we need exchange server for
i mean i can be wrong too but if i m wrong can someone tell me the right thing
Thanks
I recommend Mail2Web, the simple setting and most important it is FREE.

Yahoo Mail

When I try to send messages it tells me that an error occurred and that it couldn't send the message. I don't know how this can be, because it retrieves my mail, it just won't send it. ???
You mean with Pocket Outlook using SMTP? (You must be a yahoo plus subscriber)
I have the same problem and managed to trace it down to the following:
The built in SMTP program does not authenticate itself 100% by the book. Can't tell exactly but I saw in the server log that it did something funny after HELO.
This causes some mail servers (on the receiving end) to ignore the mail entirely or think it's spam.
I only have this issue with my yahoo account though. Others (e.g. gmail) work fine from Outlook.
Hope it gets fixed in WM6...
T-mobile has a work around.
1) Go to T-Mobile and setup a email forwarding account (Set your phone as a MDA NOT A Dash
2) Turn off email forarding for incoming
3) ON Dash - Change outgoing SMTP to: myemail.t-mobile.com
4) Change user name (Use different than login - because you will still login to Yahoo using the pop or IMAP server to your10digitphonenumber:1
5) password is your yahoo password
Also change NO SSL on outgoing, and outgoing requires authentican checked.
This is also required if you use the dash as a modem on your laptop. I could not sent SMTP Trough T-mobile connectiosnt o laptop, but could if connected via a wifi connection that was not t-mobile.
Charles
I have wm6, it used to work. I will try that, but i don't see why it just stopped working all the sudden when it used to....

GMail doesn't work....WM6.1

I was setting GMail on tmail (IMAP) setting and doesn't work....
system said:
Error
Your internet connection is not configured properly.
Please Verify your setting in Connections.
I got Tmobile WEB 5.99...Could be thats the problem?
adavid said:
I was setting GMail on tmail (IMAP) setting and doesn't work....
system said:
Error
Your internet connection is not configured properly.
Please Verify your setting in Connections.
I got Tmobile WEB 5.99...Could be thats the problem?
Click to expand...
Click to collapse
Go to messaging\Setup E-mail and just use automatic setup and it will connect via POP3.
Doesn't work POP3 either, I did it before and nothing....I was searching on internet and most of peoples said that use IMAP4 but nothing....
I'd like if anyone that has proxy 5.99 TMO has been configured GMAIL on WM6.1
What server are you using guyz???
I have gmail setup on kavana's 6.1 rom also using tzones 5.99 for internet. works fine. Im just using the regular pop and smtp settings
What option do you have for the server...Internet?
with that doesn't work mine and I change for: T mobile MMS, T mobile Data, work....doesn't work either
I have mine set to work.
I have the same problem. I have the unlimited plan and I get the "connection error" and I it asks for my login and password over and over. I only have this problem with 6.1. I have tried the T-mobile email plugin, and the other 3 ways of adding an email account.
Wierd thing is, I backed up my 6.0 data before the swap to 6.1 with Sprite backup. When I restore to the 6.1 I get me email back and it works fine, problem is that it really screws up most of the stuff I got with 6.1.
I also have the same issue.
My Yahoo and Gmail worked fine on 6.0.
6.1 Yahoo refused to work until just the other day...It has not worked since the 6.1 install until now...
Gmail will not work either no matter what... It did download the headers, but it shows nothing and will not work otherwise...
if you guys want tell me the screens you need and ill get you the settings that work for me.
I tried a lot of option and nothing guys, let see what I do....I did POP & IMAP and nothing..I tried Yahoo and doesn't work either instead they work fine through IE.
I did it POP as default and "works" sometimes, when you click on send/receive gave you the Connection ERROR....and when the system did by itself work good ( I think)...
ERROR....." The remote party has ended this connection"...
I go a new messajw
"The remote party has ended this connection"....
Does anyone has this message before?
just out of curiosity do you have pop turned on thru gmail?
Off course....
And I have setting up to "work" too
When I push (send/receive) gave that error...
Only download automatically messages twice when it's wants....
What do you recommend me to do?

wm6.1 can not connect to POP3 messaging send receive

now with a wm6.1 rom on my Hermes, messaging text, MMS, and hotmail working over MEdia Net just fine with no errors when doing Send or Receive.
This is not the case for my POP3 internet mail over MEdia Net (AT&T). When I do a send receive I get messaging telling me it error synchronizing, and data connection tells me it can not connect.
Now if I am logged into my home WiFi, I have no problem logging into my POP3 account, and can send receive freely.
I need to be able to get my POP3 email through the MEdia Net data connection, what do i need to do to make it work. I have tried every thing i know. Just do not know what i am missing. thanks for you help ahead of time.
using WM6.1 Pro CE OS 5,2,20273 by PDACorner
I have had this same issue when I flashed my phone to a "non-standard" AT&T ROM. The issue seems to be in the proxy settings. Download the attached file and run it on your device. It will correct the registry settings for your phone. It also creates the Proxy Manager folder on your device. Also verify that your Media Net settings are correct.
http://www.wireless.att.com/answer-center/main.jsp?t=solutionTab&ps=solutionPanels&solutionId=64950[/URL]
Thanks. do not know what it fixed internally, but it worked, messaging is send receiving on the pop3 now through MEdia Net. Thanks
If you are computer guy you should know what proxy means.

Touch Pro 2 and gmail

I have had my TP2 for a few days now and i love it, except for the fact that I cannot send or receive email from my gmail account
I can access the internet fine, and use the youtube app fine, but whenever i try to send an email or hit send/receive i get this error message
"CANNOT CONNECT WITH CURRENT CONNECTIONS SETTINGS. TO CHANGE YOUR SETTINGS, TAP SETTINGS"
When i set up the email the only things i was required to supply were my email address and password....so i am assuming the problem lies with the way my handset is trying to access the gmail account, ie. trying to use wifi or something? (i dont have wifi, so i will only be using the "unlimited" interent provided with my t-mobile UK tariff)
has anyone else had this problem or do they know how to get around it as i have finally got myself a decent handset where i can (allegedly!) check my email on the move, but yet i somehow cant get it working?!!
Ihave tried both hard and soft resets to get this sorted but it just wont work and i feel like pulling my hair out!
n
I know it's not much consolation but it just worked for me...
I have a SIM free TP2 and UK T-Mobile Web'n'Walk.
Incoming mail server is imap.gmail.com
Account type is IMAP4
Username is my full gmail username
Outgoing mail server is smtp.gmail.com
outgoing server requires authentication is ticked
All this was set via automatic configuration.
Hope this helps,
Richard
This is what i have done to recieve and send Gmail trueout the standard email client on my Pro II.
First of all you have to enable imap at your gmail account which you can find under settings.
Then on your phone do the following settings.
- make an new account in your email client
- fill in your gmail adress
- fill in your name
- fill at incomming mail "imap.gmail" and account type "imap"
- fill in your account name (gmail adress) and password
- fill at outgoing mail server smtp.gmail.com
and those two checkboxes must be checked
- auto recieve and send is up to you
hope this will help you
ther's a known bug in windows mobile poutlook...
sometimes the autoconf for gmail doesn't work...(i had the same issue on my omnia)
you only need to enter the account details by hand..
to do that, in the first screen where your address is asked, enter [email protected]
leave it without the final m.
after that fill in manually all the account details, then when finished edit the account and put that m in the domain...
that should work...at least in my omnia was the only way to get gmail working...
I used this guide en it works perfectly
http://mail.google.com/support/bin/answer.py?answer=78886
hi, thanks or all the replies, most appreciated.
however, i have now established that i can get my gmail account working - but only over wifi!?!? when the wireless router is turned off i get the same message as before, so there must be a setting or something that is telling my TP2 to look for a wireless connection when performing a send/receive, rather than using the "internet" (if thats the right term) that is included in my contract..AAAARGH...
i have had a look but cannot find any settings for this so i must be going mad?
can anyone shed any light on this for me before i go mad??!!
quasar99 said:
hi, thanks or all the replies, most appreciated.
however, i have now established that i can get my gmail account working - but only over wifi!?!? when the wireless router is turned off i get the same message as before, so there must be a setting or something that is telling my TP2 to look for a wireless connection when performing a send/receive, rather than using the "internet" (if thats the right term) that is included in my contract..AAAARGH...
i have had a look but cannot find any settings for this so i must be going mad?
can anyone shed any light on this for me before i go mad??!!
Click to expand...
Click to collapse
Disable proxyserver, don't have the place where you can find this. I have a dutch rom
I have a gmail imap connection on my HTC Touch that was working great but has failed to connect for the past two hours or so.
I found that to change from Download 30 Days to 7 days and it worked fine.
Oddly I returned my TP2, and switched back to my VarioV, same problem (had worked fine until then). New TP2 is now here, so will start with 7 days and try expanding to 30 days later.
chillaxx said:
Disable proxyserver, don't have the place where you can find this. I have a dutch rom
Click to expand...
Click to collapse
does anyone know how to do this? i cannot find this option anywhere?
is there any way i can see how my tp2 is trying to receive data from my gmail account, ie. if it is trying to use internet or wifi?!?
also, does anyone have any details for the settings that their tp2 (on t-mobile UK) is using when trying to retrieve email (not by wifi)??!
i'm also assuming that t-mobile wont be able to help me as i got my phone/contract via a third party and t-mobile themselves dont seem to stock the phone themselves....
I had this problem, it drove me nuts until I worked out what it was, if i was already connected it would work but it would not establish its own new connection.
To fix it go into the email settings for the account, then select:
Edit Account Setup
Next
Next
Next
Next (Outgoing (SMTP) mail server screen)
Click the “Advanced Server Settings” Link
In the “Network connections” it defaults to “The Internet” but if you have gone through the “Connection Setup Wizard” when you first installed your SIM it renames the connection, in my case to “T-Mobile Internet”.
Change “Network Connections” to the correct one i.e. “T-Mobile Internet”
hey presto, you can now get your emails
hope this helps everyone
nlhall said:
I had this problem, it drove me nuts until I worked out what it was, if i was already connected it would work but it would not establish its own new connection.
To fix it go into the email settings for the account, then select:
Edit Account Setup
Next
Next
Next
Next (Outgoing (SMTP) mail server screen)
Click the “Advanced Server Settings” Link
In the “Network connections” it defaults to “The Internet” but if you have gone through the “Connection Setup Wizard” when you first installed your SIM it renames the connection, in my case to “T-Mobile Internet”.
Change “Network Connections” to the correct one i.e. “T-Mobile Internet”
hey presto, you can now get your emails
hope this helps everyone
Click to expand...
Click to collapse
if the connection has a proxy in the setup, than you can use that connection only if selected like above...
if you leave "The internet" the proxy settings are ignored...you have to select the exact connection..but this will prevent the gmail to connect with wifi

Categories

Resources