Ringer Help 8525 wm6 - 8525, TyTN, MDA Vario II, JasJam ROM Development

I recently upgraded to wm6.Since doing so anytime I press the on/off button the phone turns of the ringer and goes to vibrate . Also my comm button no longer works. Any help with this would be greatly appreciated

need more info to help such as what type of ROM and is it on a hermes and 3rd party apps installed would be good starter info ..... hope we can help

rom 3.62.502.3
rom date 10/11/07
radio 1.54.07.00
protocol 32.86u.7020.23h
When in standby push on/off unit changes to vibrate
Next time in standby.push on/off unit changes back to ring ...and keeps reversing with each push when in standby.

Related

SMS HELP PLEASE

Every time I receive sms my PDA2K turns on to notify me for the sms I received and when I dont take out the PDA to turn it off again it starts dialing or opening othier programs using the icon spread on my Today screen, also I receive almost 50 sms email notification each day which makes the battery power out , I need help not to turn on the pda when I receive an sms.
ROM Version: 1.40.00WWE
ROM Date: 3/10/2005
Radio version: 1.12.00
Protocol version: 1337.24
either turn your fone off, or tell your mates to stop texting you!"!!!!, the battery on xda2s is very fragile and eats a lot of juice, have you tried the flashing LED lights programe to turn those off??, they seem to make battery life a little longer!!!!!
You need something like this http://www.trancreative.com/nicestart.aspx to lock your device when your not using it.
There is a setting which ensures that the PDA will only respond to the power button when its on standby - that does the job for me.

Random Screen Blackouts

Has anyone else experienced this problem with their P3300?
Unpredictably, the screen on my P3300 will fail to come back on after I have shut the device off with the power button. I know the device is on because the hardware buttons light up when pressed, but the screen appears almost completely dark and won't come back on when tapped. The only way to get the screen back to normal function is to get to the backlight settings and adjust them. This seems to return the device to normal function...until it randomly happens again. I'm seeing this about two or three times a day.
At first, I thought I needed to soft reset - and this worked - I then just went to the backlight settings to modify them and got back normal function for a while. The strange thing was that after the screen issue and the soft reset, my backlight settings for battery power were on "brightest" - and they wern't there before the issue popped up.
Now I have a WA2 shortcut on my top bar that goes to backlight settings. I know approximately where it is on the screen, so when the issue pops up and the screen is pitch dark, I can tap in that general area and get to backlight settings. The screen is still dark, but I can just make out the backlight slider enough to adjust it from there and avoid the soft reset.
So, basically, it seems as though my backlight settings are randomly resetting themselves to the lowest setting every once in a while after power off. Anybody else with an Artemis seeing this? Seems a little similar to the first of the three questions in this thread, but not exactly the same:
http://forum.xda-developers.com/showthread.php?t=281763
Any help or empathy would be appreciated!
I've had that, too. I assume the program for the allocation of the soft keys has a bug. You had to HARD RESET, and dont change the soft keys any more.
I've read some more about this issue and it seems it is a WM5 bug that is seen across devices. I guess I can hope they will address it at some point in a future ROM release. Thanks for the suggestions anyway.
Check this out for more info:
http://www.sbsh.net/forums/index.php?showtopic=12842
Sleep Mode
What you are describing sounds like sleep mode
" Quickly pressing the POWER button turns off the display temporarily and switches your device to sleep mode. Sleep mode suspends your device to a low power state while the display is off in order to save battery power "
Click to expand...
Click to collapse
(Taken from MDAC3 Manual)
Pressing the power button again should bring it out of Sleep Mode. If it is getting stuck then it is possibly a bug affecting the sleep mode.
Hi!
Any news on this issue? My phone is acting just like described in this thread (and no, this is not standby/sleep mode)
PK
This only hapen to me after a soft reset. And the only way i found to "fix" the problem was after every soft reset going to Settings>Backlight move the brightness bar up and down. And after that it never blocks the light again until the next soft reset. Sometimes when connected to usb it blocks too but if you always go to the backlight, befor e the light goes off, and move the bar it wont block anymore...Its not a real solution but the only way i found...
Imaginati0n said:
This only hapen to me after a soft reset. And the only way i found to "fix" the problem was after every soft reset going to Settings>Backlight move the brightness bar up and down. And after that it never blocks the light again until the next soft reset. Sometimes when connected to usb it blocks too but if you always go to the backlight, befor e the light goes off, and move the bar it wont block anymore...Its not a real solution but the only way i found...
Click to expand...
Click to collapse
Yeah, that is all I am doing too. Hopefully HTC is noticing this problem too and a future ROM release will alleviate the problem. Perhaps a Crossbow upgrade someday????
I have the same problem. I found out that it happens when PhoneAlarm switches my profile from work to home.
Solution!
Check this thread out:
http://www.pocketmax.net/smf/index.php?topic=3324.0
As stated above, looks like PhoneAlarm is the culprit. I use it and I would bet that everyone posting in this thread does too. In fact, Bruce from PocketMax has even listed the Artemis Backlight corruption issue as a fixed item in his latest release, v1.57 available here:
http://www.pocketmax.net/phoneAlarm.html
Once you download and install, make sure to go the the backlight % setting in each of your profiles and select "Leave Unchanged". This alleviates the problem. My Artemis no longer goes blank without backlight slider manipulation after a soft reset!!! One less thing to worry about!
I had the same problem ... I try your solution and make a feed back
I too have had this problem and have PA installed - I'll also apply the solution and report findings . . thanks for sharing.
Hi!
I installed the PA 1.57 upgrade, but it did not help... But it seems like the backlight settings on the Artemis device is not standard, so I uninstalled Spb GPSR monitor (who has a backlight setting option), and then the problem disappeared.
PK
Looks like any program you have installed with a backlight setting option needs to be adjusted not to change the backlight settings in order for things to work properly for the time being. I'm sure that software developers will adjust to this new device soon just as PA has. Thanks for the feedback!
hi,
i have PA 1.58 (build 100), and the reminders for missed calls not work properly. the orange led is blinking, but the vibration and the sound are
not played (i have set the alarm reminder to 1 x 5 min x endless)...
please, test and indicate to me if this function works on your artemis...
the reminders for sms works fine.
thank's
Ahqar said:
Pressing the power button again should bring it out of Sleep Mode. If it is getting stuck then it is possibly a bug affecting the sleep mode.
Click to expand...
Click to collapse
In other forums they have this 'problem' too, and all of these people had SPB Pocket Plus installed. My guess is that it is a backlight setting in that program. You can temporarily get the backlight back on by connecting the phone to the pc through ActiveSync, and change the settings accordingly.
Hard- or softresets shouldn't be necessary to solve this.
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
@all
happy new year!
Ok! so i am not alone! a couple of times i did face this situation. the screen doesnt come up, but the device is on, and i am able to see a slight silhoute of the icons, very very light. and i have to do a softreset to get it back on.
bmod said:
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
@all
happy new year!
Click to expand...
Click to collapse
Yep, that´s it! In every app offering different profiles (like PocketZenPhone, PA, etc.) Settings for Backlight (including Minutes to switch off) must be exactly the same in each profile! Maybe <Leave unchanged> will work, too!
bmod said:
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
Click to expand...
Click to collapse
Hey Guys,
We appreciate the posts about Phone Alarm, but if you just read this entire thread before posting you would have seen that this is old news and this issue was resolved in post #9!
Thanks anyway!
Oh, and Happy New Year as well!
hi,
please, tell me if pa reminders for sms and missed calls work fine in your p3300.
i have installed spb pocket plus and pa and the reminders for pa not work now.
please, if this combination works for you, explaine your config settings.
thank's

Alarm function in MDA Compact 3

Hi Forum,
Having a problem with snoozing alarm with my new T mobile MDA compact 3 (UK) with WM 5
The alarm sets fine and goes off at the right time but once it goes off there are no soft button to dismiss or snooze it. I tried unchecking the button which says sound and replay but no use. It keeps going on . Also the button which usually flickers green is orange and even after soft reset thing does not improve.
Is anyone having the same problem and is this a fault with WM 5 software or some file is missing on my phone
Any help would be appreciated
cheers
manoj

HTC Tytn keeps switching to vibrate mode

Hi all,
Cooked a WM6.0 ROM for my Hermes using Pandora's kitchen a while back and I've been very happy with the result. The only two issues I've found:
- Two of the icons in the OEM\Today Icons - HTC Home Icons - Original folder were wrong, that was easy enough to fix...
- Phone keeps switching over to vibrate mode
Can't seem to figure out the vibrate thing, since it does not seem to occur for any particular reason. I'll set the phone up to go for a drive (cancel forwarding, enable blue tooth, disable wifi, make sure sound is on, and then lock phone) and then leave it in the case while driving. After some time it may or may not switch to vibrate. At that point hitting the voice dial button on the headset does not give me the beep to start talking making it a little difficult to use...
So just wondering what would cause the phone to switch to vibrate mode? Any thoughts? Thanks!
That happened to me when I had my wizard. I think it was a compatability issue with HTC home, which made the device to go to Vib everytime you sync it to PC. You might have to do a search on it and see if you come up with anything!

Official ROM 2.07.401.1 WWE and Sleep mode problem

Hello,
I've got a problem since upgraded to the official ROM 2.07.401.1 WWE. When I turn HTC to Sleep mode then some applications stop notice me some actions, like Slick or Skype. When someone write me, no sound notice me. I have to activate display and then I get the sound. But it's late. Similiar problem is with CorePlayer. If I pres Power button to sleep mode, music stops until I turn on display again.
Has anyone a solution? Previous ROM versions worked fine.

Categories

Resources