Hi everyone I've recently been given a O2 Orbit but when you turn on the phone a white screen comes on and coloured lines come on infront, I was just wondering if any of you fine people would know if it was the screen. Im new to this so any information would be greatfuly recieved.
Thanks for your time
is it the green/blue/red screen?
when in doubt, hard reset it. i think its the two soft keys being held and inserting the stylus into the reset hole
No it was ant the green/blue/red but have sorted it now just did a reinstall of the factory rom and its fine now thanks
Related
HI All, have an intersting problem, was surfing the net via wireless when the unit locked up. Soft reset and now all I get is a white screen. The unit seems to hard reset with the startup sound that the unit makes when you first start it up out of the box, but the screen stays white.
Any Ideas? :roll:
mmm.... Hard Reset :twisted:
HI Xeon,
tried that and still comes up with white screen, but does all the correct things re sounds but all you can see is a totally white screen.
You could try leaving it with the battery removed overnight but it sounds like a hardware problem to me, could be the lcd has died or the connection has come adrift for some reason.
I suggest u Upgrade or reinstall the ROM , maybe something happened to one of the files that should not be modified , anyway , u won't lose anything , u already Hard.Rstd .........
i had the same problem before..i did an upgrade that fixed it. but still have a backup even if its a white screen..after i upgraded i had another problem with the Storage Folder missing..and the list goes on..dont wory you'll know what i mean when you get it..
It happened to me the second day I got my O2 XDA IIs. Hard reset didn't seem to do anything... The unit didn't response to a soft reset either... It was just frozen... I removed the battery, boxed it up and was ready to return it. The next day, just before I was about to drop it off, I was curious and did a reset and everything went back to normal... It never happen to me again... Don't know what happened :?
I have the same problem...
The phone shows white screen white it can recieve & make calls, activesync can recognize it.. But the screen still white !!
Any other suggestions for helping solve this problem..
Is this means that the LCD is dead ?? or the problem in its connectors or it's a software prob. ???
Sorry if there is an answer on the forum, but I couldn find it...
I bought XDA EXEC from O2 Ireland. Everything worked ok, but anyway I done upgrade of software.
After upgrading, the screen changed into weird coloured noise screen. And keep like this for half hour. I'v done hard reset, restored factory settings, after few second screen comes again with coloured noise screen. Another reset didnt change sittuation...
Im not advanced in pocketPC stuff, so please help
THX,
I have a Siemens SX66 which has worked great since I got it when it came out. Recently I cracked the screen so I replaced it with a new lcd including touch screen. The screen is a geniune HTC Sony screen. After putting it together again the software was reset. It asks to touch the screen to begin. Then, it goes straight to "align screen" and asks to tap the target at each location as it moves around to align the screen.
It seems to be stuck there because I have had it cycle through the same spots (original and 4 corner spots) over and over at least 20 times without going to the today screen yet.
I tried reflashing the software and after a successful flash it still does the same thing.
Can someone tell me what to do to make this thing work again?
Same thing here :0
Did you two guys solve your problems?
I have the same problem, I am still trying to fix it. I suspect from the backup battery, since before I hard reset my SX66 all programs lost their configuration when I turn off and on again my SX66, and when I tried to realign the screen the align cycle repeated forever. Then I tried hard resetting, reflashing to various OS's and I can not pass the initial calibration screen.
Please keep me posted if someone have found the way to solve it.
Thanks !
Hi,
I upgraded to LVSW and all worked fine for 1 day. Next day, i got the Align Screen Message which prompts you to press the 5 points on screen.
Cant get passed this screen. Not sure if it is just bad luck that screen breaks same day as upgrade or as a result of upgrade.
Any ideas to get passed the screen align program?
Thanks
Richard Kingsley
Orange SPV 3100
hard reset. if the problem persists, then you have a hardware problem and need to warrant repair/return.
I had the same, also with the LVSW (coincidence???). Had to bring it in for repair, new screen. Can't imagine it's the ROM.
Thanks for your help. Tried Hard Reset yesterday, but no difference. Going to send device back for screen to be repaired. I cant imagine that changing Rom could cause this but you never know.
Thanks again
Richard
Have sent it back to o2 now, but wondering in the 2/3 week anticipated for repair,if any one else has had this problem.
All running well,then turn on to only get this white screen.No soft or hard reset options,or entering bootloader.Battery out overnight.Only sign of life was flashing phone signal light.
Had recently installed spb insight,but can't think this could cause such a major problem.
Any one else had this?
Also got white screen issues with HTC P3300
I'm getting white screen issues with HTC P3300. White screen then vertical stripes. Hungry programs involving wi-fi or gps seem to trigger within minutes otherwise can be hours. Also soft reset never works. Hard reset does not work with key combination ever either. Have managed to do hard reset with clear storage option. Need to leave battery out for an hour to be able to turn it back on. Rom is original. OS 1.12.0.0. Been all over the web looking for possible causes. Suggested culprits are loose connections inside or overtightened screws. Is it too early to get the torx screwdriver out?
HTC are offering an official upgrade to WM6 13/07/07 for the P3300.
What will I do?
I have the same problem some times.
The phone has it's original software and rom.
It isn't software problem.
After a hard reset does the same thing.
I am waiting the service to come back from vacations.