NooB :ERROR [300]problem - Upgrading, Modifying and Unlocking

Problem: "INVALID UPDATE TOOLThis update utility cannot be used for your PDA phone. Please get newer update utility".
PPC:O2 XDA mini s
Hard_SPL with SPL-1G4.exe
After reboot the
IPL: 2.21.0001
SPL: is 2.21.olip.
gsm: 02. 07. 10
OS:2.21.4.1
No problem using the phone with original WM5.
However I have tried to upgrade with a variety of WM6 roms from the forums but encountered the same problem as listed above.
Searched the forum but can't find an exact solution.Any solution please.
thanks in advance of your help.

Related

Bricked my QTek 9000 - HELP

I attempted to upgrade the ROM on my QTek 9000 with the latest update. Now it seems to be stuck at the "Serial/USB - V 1.0"
I can use the method descibed in this forum to update the firmware and its always successful but after a hard-reset I end up at the same place.
Any assistance would be greatly appreciated.
http://forum.xda-developers.com/viewtopic.php?t=4534
1. Check if something hasn't been asked before
Some questions just keep popping up over and over. Please use the 'search' function in the menu above each and every page in the forum. Try entering a few keywords to see if your question has been asked before. If it has, please read the topics and see if you can figure it our from there.
(We acknowledge that part of the problem is that we never created a well-organized system of FAQ (Frequently Asked Questions) documents. But then we're doing lots of cutting-edge stuff, and we'd rather build cool tools than work on perfecting FAQs.)
Click to expand...
Click to collapse
This will help you:
http://forum.xda-developers.com/viewtopic.php?t=43592
Thanks and I found another way
Thank you for the info. I did not know that screen was the "Boot Screen". I did find an alternate solution.
I attempted to upgrade the QTek with its own installer which failed (Error 115 - Radio Error).
A reattempt put it into the Boot Screen.
I tried the HOWTO: ROM Upgrade Universal at this link
http://forum.xda-developers.com/viewtopic.php?t=45874
This upgraded the ROM with this version and had no error but still returned to Boot Screen.
I decided to attempt the QTEK ROM upgrade with the hope that whatever failed the first time would be fixed by the HOWTO method.
IT WORKED! The QTEK ROM updated without incident and the PPC booted properly.
Glad you got it sorted =)
Info on your earlier posts?
Hello Celestial & Preditor....
Need your help!
You were both in a earlier post 13th April 2006, in ref to the QTEK 9000!
I have one of these v/nice gadgets.
only it would appear from various web sites that I have an OLD Rom! as it doesn't seem to work with SD mem greater than 1GB.
I have found a Rom.... at Slipstreamsolutions.co.uk
http://www.slipstreamsolutions.co.uk/support/rom_updates.htm
at the moment I have
Rom version 1.13.64WWE
Rom Date 09/30/05
Radio Version 1.03.00
Protocol Version 42.36.P8
ExtROM version 1.13.151 WWE
Can you "Celestial" tell me were you found your ROM upground.
and
Can you "Preditor tell me how to upgrade and if this will solve my problems???
Many thanks
Saxman60

problem upgrading radio

please help me!!!
i have a v1640 vodafone machine.
i have downloaded the 1.09 radio version of universal sited at xda-developers ftp.
i have tried to install. at the process, a error (the country id is not correct) was showed.
next, the pda not works. i have tried to make a hardreset, but the terminal don't start's...
please, help me!!!
the main problem is :
the startup not work's and the activesync soft not detect's the pda.
help me , please !!
Just check the Wikipedia and follow exactly the instructions.
Then it should work
Cheers
hrb
Link:
http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions
hi,
affortunatly i have readed other post.
i have started in bootloader mode and i have updated the rom to a qtek rom (1.13.74 esn).
later, i have updated the radio without problems.
now, i have the 1.13.74 esn rom , the 1.13.175 esn extrom and 1.09.00 radio software.
regards and thank's
hi,
in my opinion, the problem was the next: the first attempt i have installed the new radio version with the pda in normal mode...
the next attempt i don't have problems and the pda was started in bootloader mode.
regards

XDA2S & Error 25-N-10....

Hi,
i was using xda2s, with WM5 (old-build) and several months ago, unaware follow this link:
http://forum.xda-developers.com/showthread.php?t=274505
(I think this is the point the problem occur).
somehow, i have managed downgrade to WM2003SE again,
using this link:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
(ROM: 1.40.00 WWE
Radio: 1.12.00
ExtRom: 1.40.923).
Later, I want to try the new ROM (looking for the one with direct push-mail feature) of HELMI in this link:
http://wiki.xda-developers.com/index.php?pagename=Helmi.
When running BAupgrade, received error: (see attachment)
Error 100: Model ID Error 25-N-10-N-N
then trying to run with MaUpgrade, it seem work, but no upgrade at all.
(see attachment).
Desperately seeking the solution..
Need help.
Thank you very much.

Helpppppppppppppp Me

I have a XDA IIs and I have tried the upgrade.
The first stap I have upgradet the last ROM "Helmi Rom AKU 3.5" and all OK. Only I had some problem with the blouthoot. To try to resolve this problem I hase upgradet the RAdio version from 1.13 (original) to 1.15 ... from this moment the panic:
- The Phone don't work. I don't able to go on the pphone section
- The contact don't run
- The calendar don't run
- When I go un the setting phone and i do the Network search the prone find my service operator (TIM) but don't register on the network. I curiosity is that if I send a sms to my pda the sms is delivered on PDA ?
- The activesync don't syncronize
After I have tried to downgrade to the radio version 1.13, ba nothing to different
What can I do ?
Can anybody help me ?
Thanks
first then bluetooth have no relation to the radiostack the stack is only for the gsm part
good reads
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
http://wiki.xda-developers.com/index.php?pagename=BlueangelFAQ
or use search for blueangel forum "radiostack" or "radiostack AND downgrade"
or something like it
Thanks Rudegar.
I have read the doc.
I have again:
-udate rom to "Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek"
- update radio to 1.15 Type II method
I have always the same problem.
When the pda start a error popup appair can help to solve (i think):
"the file 'phoneservice.exe' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file"
where can i find the correct installetion for this file
Thanks a lot
Luigi
Your Upgrade
The udate rom to "Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek isn´t for the XDA IIs. It´s only for the Blue Angel Device. Downgrade your Device to the original-rom and look in the community to an rom-upgrade for XDA IIs.
mcpunicorn
mcpunicorn said:
The udate rom to "Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek isn´t for the XDA IIs. It´s only for the Blue Angel Device. Downgrade your Device to the original-rom and look in the community to an rom-upgrade for XDA IIs.
mcpunicorn
Click to expand...
Click to collapse
Error, XDA IIs is a Blue Angel! It's only another name for Blue Angel

Trying to upgrade T-Mobile MDA IV

Ok please be gentle before you read.
I'm trying to change the offical T-Mobile ROM to the newer offical 1.93 from HTC.
I have download the ROM exe from this site but when it trys to install ROm an error comes saying "Error 244 invalid model ID".
I have tried searching & looking through loads of threads but all seems very complicated to a numpty like me!
Can some body please talk me through in easy steps to help me?
Thanks in advance.
You have to install hardSPL first. I prefer 1.40 from olinex.
http://forum.xda-developers.com/showthread.php?t=415191
http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705

Categories

Resources