I attempted to upgrade the ROM on my QTek 9000 with the latest update. Now it seems to be stuck at the "Serial/USB - V 1.0"
I can use the method descibed in this forum to update the firmware and its always successful but after a hard-reset I end up at the same place.
Any assistance would be greatly appreciated.
http://forum.xda-developers.com/viewtopic.php?t=4534
1. Check if something hasn't been asked before
Some questions just keep popping up over and over. Please use the 'search' function in the menu above each and every page in the forum. Try entering a few keywords to see if your question has been asked before. If it has, please read the topics and see if you can figure it our from there.
(We acknowledge that part of the problem is that we never created a well-organized system of FAQ (Frequently Asked Questions) documents. But then we're doing lots of cutting-edge stuff, and we'd rather build cool tools than work on perfecting FAQs.)
Click to expand...
Click to collapse
This will help you:
http://forum.xda-developers.com/viewtopic.php?t=43592
Thanks and I found another way
Thank you for the info. I did not know that screen was the "Boot Screen". I did find an alternate solution.
I attempted to upgrade the QTek with its own installer which failed (Error 115 - Radio Error).
A reattempt put it into the Boot Screen.
I tried the HOWTO: ROM Upgrade Universal at this link
http://forum.xda-developers.com/viewtopic.php?t=45874
This upgraded the ROM with this version and had no error but still returned to Boot Screen.
I decided to attempt the QTEK ROM upgrade with the hope that whatever failed the first time would be fixed by the HOWTO method.
IT WORKED! The QTEK ROM updated without incident and the PPC booted properly.
Glad you got it sorted =)
Info on your earlier posts?
Hello Celestial & Preditor....
Need your help!
You were both in a earlier post 13th April 2006, in ref to the QTEK 9000!
I have one of these v/nice gadgets.
only it would appear from various web sites that I have an OLD Rom! as it doesn't seem to work with SD mem greater than 1GB.
I have found a Rom.... at Slipstreamsolutions.co.uk
http://www.slipstreamsolutions.co.uk/support/rom_updates.htm
at the moment I have
Rom version 1.13.64WWE
Rom Date 09/30/05
Radio Version 1.03.00
Protocol Version 42.36.P8
ExtROM version 1.13.151 WWE
Can you "Celestial" tell me were you found your ROM upground.
and
Can you "Preditor tell me how to upgrade and if this will solve my problems???
Many thanks
Saxman60
Related
Hi
For my sins I have upgraded?? to a MDAIII. I have found this site due to few problems, BT, backlight settings to name a few and I have noticed a few members, have got upgraded specs than I have. Can someone help re my current specs, as to what they are and if I need to have them. Thanks in advance.
My phone is 2 weeks old!
Model PH20B
Rom 1.06.00 ENG
Rom date 8/5/04
Radio 1.00.00
protocal 1337.30
Extrom 1.06.167ENG
1GB storage card with tomtom 5
PS why cant I send anything via BT except files and why does it switch off after exiting TT?
Thanks again
Sorry to say this but you need to read wiki.
Don't be Scared
Hi There..
As MDAIIIUser states, read Wiki.. (The link is posted in the top LH corner of all windows on this site..)
Once there, Follow the required instructions..
I have to say, if you feel like you need to post such questions then perhaps you shouldn't be thinking of upgrading your MDA3..
ie, if it ain't broke, don't fix it! :lol:
Also, I recommend doing searches on items before requesting help as you'll find that someone has probably asked the question before and someone such as MDAIIIUser has come up with the answer.
Hope this helps..?
Hi to all!
I'm a new qtek 9000 (dangaard) owner, and i started one week ago to look for tweaks and so on.. so here i am! i red every forum and many, many messages, but none gave me an answer...
Special attention (and thanks) go to buzz for his deep knowledge and tutorials.
My actual goal is to FULLY backup (dump) ALL that is needed to FULLY restore the ORIGINAL (warranty not voided) firmware/software.
To do this i tried 2 methods:
1) task32, d2m from boot loader : NO SUCCESS , usual "not allow operation" message; i have bootloadr 1.0 , so i think is not possible, BUT CAN I DOWNGRADE the loader, dump, and then RESTORE my 1.0 loader ? how to do it (if yes) ??
2) the "pdocread" method: ok, but in the qtek.raw there is NOT MY radio, and so on.... how can i get MY original ones ?
p.s. there is no official upgrade for my qtek yet... so i can't' use it only wity my pdocreaded os...
Thanks a lot to everyone!! and please give me answers )
rom dump
I too would like a simple walkthrough on how to dump Radio , Rom and Extended rom.
Hats off too Buzz and many but I have tried to make sense of various posts and all seem to go off abit for us simple folk.
Does someone out there have answers please to:
1) Can a rom back up (dump) be done.
2) When dump has completed does original rom stay on device or does dumping it mean it's gone from universal completly.
3) Can you save these images and install them back onto universal at a latter date.
If this is possible how? What software do we need to do it?
I want to update the crapy slow rom on my M5000. But to cover my arse I would like the option to restore it to it's factory shipped state if it all goes belly up!
so folks ??
does someone takes care to give us an explanation of all this ??
Hey guys, just PM me... I'm now at work but have made a word document on how to do this adn it's at home.
I also had this dilema... I have a Spanish QTEK and no official ROM so here goes....
1. If you want the .DOC, pm me where to send it - i take no responsibility for the results but will help if you get stuck somewhere or need clarification on the steps.
2. I got the my radio (1.03.00) from the english qtek ROM by copying the radio_.nbf file as radio's are not language dependent (as far as i know). The OS, i created the QTEk.RAW with pdocread, the Extended_ROM i just copied and pasted. That's how I backed-up my device that I can restore again still "under warranty" so to DUMP/BACKUP
2.1 OS : Use pdocread
2.2 Extended_ROM : Just copy and paste
2.3 Radio : Get it from a ROM update with same radio version.
Hope this helps
Hi guys,
I have a newbie question, please.
I read something about ROM is language dependent.
My O2 XDA2 has a ROM version 1.03.00 USA, can I do an upgrade to a 1.72.187 UK version? If no, is there an US version upgrade available? where can I find it?
Thanks for any help.
Alex,
i flashed my HTC TRINITY P3600 with trinity update guide (TRIN_RADIO_1.38.00.11_Only_SSPL or 1.40 probably) and installed windows mobile 6.0 on my device. When i installed tomtom 6.03, it says no GPS device!. Guys help me how can i restore it?
usman3206 said:
i flashed my HTC TRINITY P3600 with trinity update guide (TRIN_RADIO_1.38.00.11_Only_SSPL or 1.40 probably) and installed windows mobile 6.0 on my device. When i installed tomtom 6.03, it says no GPS device!. Guys help me how can i restore it?
Click to expand...
Click to collapse
OK - which RADIO do you have? - this is not clear.
You should try - Hard reset - install tomtom6.03 start up tomtom - sometimes for say 30s tomtom can say no GPS device - before the message changes to waiting for a valid GPS signal. Be patient.
Also search for "no GPS Trinity" here: http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
you should find others with the same experience as you!
Good luck.
hi,
i have read in this forum, that any Radio ROM ending in 1 have GPS enable, so you must wait a litle time (1-2minutes) before your GPS program fix the GPS signal.
i installed it with trinity info guide and used this radio version 1.46.00.11. but my device information show radio version to be 1.16.00.00 and ROM version 2.0.8.2. should i flash it with another radion 1.46.00.11 GPS available on this forum? Pl help. sorry for double post, i was really confused where to put it and was really desperate for my GPS. i will be careful next time. thanks for your reply. i am trying other options
usman3206 said:
i installed it with trinity info guide and used this radio version 1.46.00.11. but my device information show radio version to be 1.16.00.00 and ROM version 2.0.8.2. should i flash it with another radion 1.46.00.11 GPS available on this forum? Pl help. sorry for double post, i was really confused where to put it and was really desperate for my GPS. i will be careful next time. thanks for your reply. i am trying other options
Click to expand...
Click to collapse
hey! We have exactly same problem! the radio also show 1.16.00.00 on mine!
Upgrade your radio then it should work! had a friend who had also a very old version. He got's it fixed with upgrade!
i have already replied you in the other thread where you posted this issue.. there's no need to double post this. I've posted the link to hard-spl 1.20
you need to use hard-spl 1.20 olipro to install your radio, 1.30 has resulted in radios not being flashed even though you follow all the steps.. there is a note about this in the guide if you read it carefully.
Flashed With Olipro 1.20
RACERX i have flashed it with olipro 1.20 but still it shows no GPS device? even after 20 minutes of keeping tomtom on. should i upgrade rom to 1.40 GPS, i saw one on this forum. although i have downloaded it but it ROM update utility shows pretty strange words on its menu!!! what next
what radio do you currently have
The problem is clearly that you radio ROM is not up to date - and that it why you don't have GPS.
hi buddy! I got it solved!!! Yes it's the problem of the radio, and seems that if your hard SPL version is 1.30, you are not able to flash the radio. everytime it seemed works but after flash the radio just remain the same.
read this thread,http://forum.xda-developers.com/showthread.php?p=1483529#post1483529
there is a radio ROM with hard SPL which flashs the hard SPL first then the radio. I succesfully found the device and got GPS working yesterday!
racerx_ said:
you need to use hard-spl 1.20 olipro to install your radio, 1.30 has resulted in radios not being flashed even though you follow all the steps.. there is a note about this in the guide if you read it carefully.
Click to expand...
Click to collapse
ummmm... yeah.. isn't that what i just said? does anybody read on this forum?
racerx_ said:
ummmm... yeah.. isn't that what i just said? does anybody read on this forum?
Click to expand...
Click to collapse
No - reading is out of the question. What you have to do (especially if you are new) is just create a new thread - or if not post the same question in as many threads as you can find that are half relevant.
(This of course is cynical sarcasm. Please - do not do the above. I implore you all to READ - as you will find the answers. Also - when you find an answer to your question - try thanking the person who brought you the answer - instead of pretending that you found something new out)
Probably radio version 1.46.00.11
i flashed using trinity info guide and used radio version 1.46.00.11. but my device information show radio version to be 1.16.00.00 and ROM version 2.0.8.2. should i flash it with another radion "1.46.00.11 GPS" (but RUU shows strange wording on the menu when i launched it but didn't install it cause i wanted a go from u) available on this forum?
my goodness... it says on the bottom of the guide in BRIGHT RED FONT "If you have followed these steps, but your radio has not been upgraded, please install Olipro's Hard-SPL version 1.20 found here using SSPL (do not enter bootloader manually) and try to flash your radio again. After doing so, it is recommended that you flash Hard-SPL 1.30 again."
i've now posted this info in the million noob threads as well... seriously ppl..
Thank You Very Much
RACERX you are the MAN, you really are an expert. Now my GPS device is working but searching for the signals as i am in Pakistan these days. Know of any south asian (pakistan or saudi arabia) maps available.
Besides tomtom, which one is the best GPS navigator? And if possible can u tell me where i can find information regarding using my laptops net connection for my PDA? i am an old user of computers (since 1991) but a newbee in the world of pocket pc, and its because of you that i could change completely my SFR s300+ into an english windows mobile 6. I will donate something for you man. I read many threads carefully but was wondering around untill you pulled me outg of this trouble.
Again THANK YOU VERY MUCH
glad it helped.. i'm not familiar with which map programs support pakistan. I use MapKing for Singapore where i am, and love it ... i don't see a pakistan map, but you can check http://www.mapking.com/en/MK10/MK10_Dowload_Eng.htm#Malaysia Tom Tom seems to be quite popular, but again i don't know what countries it supports. Maybe you could try garmin or something? I know that they at least support thailand and such.
about your net connection, you basically want to use your trinity as a bluetooth modem? I've never done it, actually, but i think there are some threads on it if you search around. sorry i can't be more help. let me know if you get stuck
Thanks Again
I really appreciate for your timely and valuable response.
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
You must back to return
tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
Dear friend,
I know schaps have a fout make by these rom. You must old rom update on your hermes. You must power and sound button pressed than hard reset doen than you if you see a colored screen than can you old version rom update. Sample: Schap'4.31
regards,
Bahadir
thanks for the quick respond
tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
What should you do:
1) READ THE ENTIRE THREAD OF THE ROM BEFORE FLASHING (IF THERE IS BETA SIGN!!!!
2) you can either keep it - it will work if you take off the SIM card and Hard reset the device, then turn off automatic time update from network AND do not try to synchronize the device via AS (taht way the device will know the correct time and block itself again)
3) Flash any other ROM - you do not need Active sync to be working to flah a ROM, just put your device into Bootloader, plug the usb cable and if the bootloader says USB you can flash whatever ROM you want. If you want WM6.1 you can use PDA viet ROM (works without time bomb, but it is not very stable).
The PDA Viet WM6.1 works great after setting PagePool to 6mb instead of the default 4mb. Before doing that, it was extremely buggy and unstable.
Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien
juliengourou311 said:
Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien
Click to expand...
Click to collapse
Read post #2
TechBill said:
Read post #2
Click to expand...
Click to collapse
Excuse me, i read it but i don"t understand wery well.
I have to take a hard reset , with pressing the power button, but what is the sound button ?
it is the weel on the left side ?
i have the screen with color but during the update i have the error27O "the image file is corrupt..."
juliengourou311 said:
i have the screen with color but during the update i have the error27O "the image file is corrupt..."
Click to expand...
Click to collapse
It telling you what it says .. Image file is corrupt so try a different ROM, like a factory rom for your device.
And did you read the wiki recommending to flashed Hard-SPL on your Hermes before flashing any radio or ROM?
yes i read any.
But i suppose there are problem because i have the same problem with diffrents roms... I 'm trying to resolve the problem...
after few pourcents, it restart and tell this messages
I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...
juliengourou311 said:
I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...
Click to expand...
Click to collapse
Well did you flash Hard-SPL on it first before flashing any ROM?
You might have to try flashing from SD card now since you can't flash it via usb. It explained in the wiki.
.
Hi everyone,
I've just upgraded my (french) Diamond's HardSPL with the OliNex version found in the topic "Hard-SPL or how I learned to stop worrying and love the MPU". Everything was OK at this time so I booted and HTC "reinstalled" the TF3D interface files.
Everything is still working but when I tried (several times) to upgrade the Radio version to v1.00.25.05, the program stays at 0% for 3 minutes and then gave me the 262 update error. I tried to connect my Diamond to different USB ports but didn't change anything.
So I decided to download the official update from HTC website and install it (witch I did) but this update doesn't work too (same error)
The strory is not so bad because my Diamond is still working but I want to install an unofficial ROM...
PS: sorry for my english and thanks for your help
@tompim
The first post in the radio thread is worth reading carefully:-
http://forum.xda-developers.com/showthread.php?t=407956
I suspect that your problem is that you need one of the unsigned / developer hardspls for standalone radio upgrades and you are using one of the "signed hardspls"
http://forum.xda-developers.com/showthread.php?t=408621
http://forum.xda-developers.com/showthread.php?t=400950
Thank you very much for your explanation (i read the radio thread before strarting ).
In fact I want to install the Diamond Project Rom that need theses (http://forum.xda-developers.com/showthread.php?t=408621) HardSPL version but I don't know what version number choose (I tried with the 1.34 and the same problem appeared
To remove all doubt and be able flash virtually any rom, flash the developer edition unsigned Hard-SPL from http://forum.xda-developers.com/showthread.php?t=400950. It should do the trick for you.
Works like a chrarm thanks!