Related
I upgraded my Orange SPV M3100 with Dutty's Windows Mobile 6 Premium v2
http://forum.xda-developers.com/showthread.php?t=303665
I followed the exact instructions as per the following guide
http://www.mrvanx.org/hermes_guide/dutty
Everything went fine and the phone seems to be having no issues apart from the following issue of receiving calls.
My Network - Virgin
ROM Version : WM6.Premium.v2
ROM Date : 17 April 2007
Radio Version : 1.41.00.10
Protocol Version 32.74.7020.18H
If I call it from the landline it sounds as though its ringing but actually does not respond. The phone won't rings. The calling person is getting 'The is a fault' or 'Please check the number you have dialed'.
Even I tried to reset as many times.
I even switched the network to using GSM ONLY. But still happening...
But I can make calls with no problem.
Please help
i had the same problem also and im using tmobile(US), but i just used a different rom.
Any other software running on the phone? If so, try uninstalling.
santhoshkumar said:
I upgraded my Orange SPV M3100 with Dutty's Windows Mobile 6 Premium v2
If I call it from the landline it sounds as though its ringing but actually does not respond. The phone won't rings.
Click to expand...
Click to collapse
Hi
1.Try reflashing it. Some times works after reflashing or
2.Try with another Radio Rom
todd_jg said:
Any other software running on the phone? If so, try uninstalling.
Click to expand...
Click to collapse
I am running the following softwares only
1. TomTom Navigator
2. spbBackup
3. spbWeather
Apart from that none..
I even reflashed the Radio Rom..Still havinng problems..
Found an interesting reading here
http://www.modaco.com/index.php?showtopic=250460
suggesting that it might be the 3G of TMobile UK, but I belive I haven't had the issue for the past 4 monhts having my M3100 with original Orange WM5 ROM.
Thinking of going back to the latest WM5 rom from Orange
Then try as the wise Abo Forat suggested and reflash the ROM - I would re-download it too. (Or try a different one.)
santhoshkumar said:
Thinking of going back to the latest WM5 rom from Orange
Click to expand...
Click to collapse
But plz be careful and read mrvanx downgrade guide otherwise u brick your phone. Still u can try reflashing
Good luck
Since all you users seem to be posting useless topics about an RUU which wont work on the majority of Devices, heres one that DOES.
So you guys know this is the DOPOD release so it is taylored for a dopod 838 pro....your network settings will need to be added manually.
The standard RUU from dopod will not work if you have updated to HardSPL since it does not detect the SPL version as valid.
Please first Update to HardSPL (SPL 2.10.olipro) first as your device is at risk of bricking.
See how to do this update here.........then proceed to download and flash the WM6 ROM.
WM6 Dopod WWE 3.54.707.3
Repackaged with CustomRUU 4.3
This will flash to ANY Hermes device, select 'Autodetect' and off you go
Radio, IPL, SPL removed.
Rapidshare Link
MegaDownload Link
Thanks a lot
Thanks a lot sir.
Thx ! I'll try it !
OS version ?
Now i've got 5.2.1238 build 17913.0.3.0
Thanks!! downloading now ..
Thanks alot i wll try this once its down, Thanks Again
Many thanks.
Well in, as usual.
...
Thanks so much ....
It was like waiting in line for Star Wars ....
BlackBerry Connect
Anyone tried it yet with BlackBerry Connect?
Thanks a bunch
Downloading now.
I was experiencing some problems with the previously published version.
Cheers.
so did you say that the radio rom is removed from this? So is there good radio rom to use with this?
yak86 said:
so did you say that the radio rom is removed from this? So is there good radio rom to use with this?
Click to expand...
Click to collapse
Use whichever radio ROM you wish. The most current two radio versions released are 1.46.00.11 and 1.47.00.10.
NOTE: DO NOT flash without safeguarding against a brick with HardSPL.
WHat will have i to do when Dangaard will release the italian version of WM6?
Actually i flashed in my HErmes the Shnap's 3.30c pro WWE rom, and to do it i followed the Mrvanx guide to upgrade to HArdsppl 7 (olipro 2.10).
Have i to downgrade it or what?
thankyou
Hi All
Just wondering if anyone had a fix for the:
"Your current operator (23410) is not supported......"
I appreciate that you can just dismiss or "Don't show message again..."
I have installed the O2 Cab.
im trying to manually enter into bootloader mode but its not working,,, im holding down the ok button and the power button as instructed and then i reset with stylus but screen doesnt come up.
guyver2077 said:
im trying to manually enter into bootloader mode but its not working,,, im holding down the ok button and the power button as instructed and then i reset with stylus but screen doesnt come up.
Click to expand...
Click to collapse
What OK button are you holding down ?
You need to hold down the OK button on the left side of your device. (The one next to the memo/Notes button)
(It took me a while to figure this out myself )
AlbertoM said:
Anyone tried it yet with BlackBerry Connect?
Click to expand...
Click to collapse
Did not work with BB connecct (using version 4) on Fido in Canada (i.e BIS)
- PIN OK, No connection
- No service list
Alternative download site please...
Thanks in advance.
this ROM has 27MB RAM, instead of 21MB...
Volpus said:
What OK button are you holding down ?
You need to hold down the OK button on the left side of your device. (The one next to the memo/Notes button)
(It took me a while to figure this out myself )
Click to expand...
Click to collapse
haha thanks.. much easier now... i was having a tough time with the ok button on the base...
Here is what my phone shows up:
IPL-1.01
HERM100
SPL-1.06
Since I installed WM6 I can´t recieve incoming calls. The phone lights up but nothing more, and when I click on the reception or phone symbol when it lights up it says "no service" (translated from Swedish).
It was also some problems with Active Sync 4.5 since I upgraded, but those problems might just be because I needed to reinstall it.
Does anybody please know how to fix this, otherwise tomorrow it will go to the repair-shop and I will lose 12 days and the order in my life. : (
The sim-card works on another phone and it worked with WM5, and I have tried hard reset and a reinstall of WM6, but the problem persists.
/Danne
Hi,
Did you try to install an offoicial version of WM6 or one of the cooked ones of this board? If the latter did you take all the necessary precautions first eg installing an upgraded bootloader, etc?
If you have not you may have bricked your phone.
Give us a bit more detail so we can see how we can help.
Cheers
WB
hello
I had the same problem when I upgrade to official WM6 HTC rom, the phone don't ring and I loose the network.
I solve the problem with flashing the radio rom with older version.
I put wm6 on my phone the first day I got it. so I don't really know if this was a problem b4 with wm5.
mine only seems to ring my end after about 8 rings from the dialer so I have to get it within 2 rings b4 voice mail kicks in. Ypu think the if I update the radio as well will that help me?
ps. sorry for hi-jacking your topic seemed along the same line.
the same problem with Bouygues telecom!
Hi guys,
vinzcoyote can you tell me which radio version you put? i'm having the same problem with Bouygues telecom after updrading to WM6
thanks for the help.
C. J.
are you sure the phne settings havnt got blown out?
generally after about a day after i flash on a rom i lose my carrier settigs and i get no connections. i use the cnguar provisioning cab that is floating arond to quickly fix this.
CrunchyGremlin said:
are you sure the phne settings havnt got blown out?
generally after about a day after i flash on a rom i lose my carrier settigs and i get no connections. i use the cnguar provisioning cab that is floating arond to quickly fix this.
Click to expand...
Click to collapse
Sorry but i'm new to this: whats the "cnguar provisioning cab "?
thanks
CJ
Hi everybody,
Sorry it took a while to answer (sleeping time).
I installed the official version from HTC Europe and it it only the incoming calls that doesn´t work, I can call other people.
THE SOLUTIONS
Two solutions seems to have been offered (below) but I (as Curious Jack) are new to this so could you please elaborate of give a link where I can read more?
Vinzcoyote "I solve the problem with flashing the radio rom with older version"
CrunchyGremlin: cnguar provisioning cab
Thanks so far.
//D
Hi there
I had the same problem with mine after flashing to wm6 (but on a trinity)
Apparently there are 2 fixes:
1. Get a NEW sim , or
2. Flash radio rom back to an earlier version that was used with wm5.
Hope this helps
luckydip said:
Hi there
I had the same problem with mine after flashing to wm6 (but on a trinity)
Apparently there are 2 fixes:
1. Get a NEW sim , or
2. Flash radio rom back to an earlier version that was used with wm5.
Hope this helps
Click to expand...
Click to collapse
Thanks!
Two concrete solutions.
One last question: I use a Swedish OS - do the radio roms that is under: "Extracted Radio ROMs for your Hermes" work for me? Or only Anglosaxian PDA:s?
/Dan
similar problem discussed here:
http://forum.xda-developers.com/showthread.php?p=1442269#post1442269
in fact Palm Treo 750 (HTC Cheetah) and Hermes are based on the same radio module.
latest Palm Treo WM6 Radio version: 1.47 (Qualcom)
What that Palm utility does is simply downgrading radio to earlier version. This might work for Hermes in bootloader mode as well.
My point is: no need to install hard sspl if one can downgrade to earlier version of radio with _official_ radio downgrade tool.
I will try later and report back.
update: Palm Radio downgrade tool picked up that device is incompatible. no luck so far.
Seems problem is with Bouygues Telecom
Hi Guys,
Got the exact same problem with Bouygues Telecom. I put a Orange Sim card and it is working so I assume the issue comes from Bouygues Telecom.
So that to check, are the french guys all on Bouygues Telecom or are you using other Telco operators?
Frederic
SOLVED : WM6 & HTC Tytn & Bouygues Telecom now working
Guys,
to make it work, you need to flash ROM Radio 1.38 on top of Windows Mobile 6.
ROM Radio 1.38 can be finded at http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
what version did you use? There are few of them listed on that page:
1.38.00.01
1.38.00.10
1.38.30.10
Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.
the same
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.
kosiara said:
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.
Click to expand...
Click to collapse
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers
Same problem here
Zecanilis said:
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers
Click to expand...
Click to collapse
Hi Zecanilis,
I encounter the same problem that is described here by user kosiara an Novy
The GSM signal is excellent, but the phone does not work from time to time and when I try to make a call, I get the message "the operation failed". of course nobody can reach me neither... When I do a soft reset everything is back to normal...
This is very anoying and I do not know what to do.
I bought this PDA second hand, with the upgrades already done for me. Since I do not have any personal data or programs on it yet, I wouldn't mind doing a hard reset and installing everything from scratch.
What would you suggest as a stable system OS and ROM versions?
Any help would be much appreciated.
Here are my actual data:
XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.13.0.0
ROM version : Artemis Touch 4.02 WWE
ROM date 4/08/08
Protocol version 4.1.13.52
Model Nr : ARTE 200
WM 6.1 Professional
CE OS 5.2.19199 (Build 19199.1.0.0)
Regards
But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks
Zbootsom said:
But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks
Click to expand...
Click to collapse
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers
Zecanilis said:
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers
Click to expand...
Click to collapse
Hi, and thanks for your reply.
I am new to this and althought I read many post, I am not sure.
Can I just upgrade the OS Build without flashing a new ROM.?
If Yes, How do I do it...any tutorial?
Thanks
No.
You have to flash a complete new ROM.
Cheers
OK Thanks
Whish me good luck,,,
Good luck and good choose...
!Novy said:
Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.
Click to expand...
Click to collapse
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.
novy said:
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.
Click to expand...
Click to collapse
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.
neilhhardy said:
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.
Click to expand...
Click to collapse
Thanks for your answer. Yes, I flashed it twice and I even flashed a factory rom before that. All Artemis Touch roms were fine until 4.01 and 4.02.
So Zecanilis is probably right blaming the OS version for that malfunctions.
New Rom
I have flashed my device using USPL (took me 2 days to setup the program to work with vista drivers). Then I flashed the same ROM I had before (Artemis Touch 4.02 full Red and Black) but with a different OS build. (as Zicanillis advised)
I will use it for a while and let you know if the freezing phone problem has been corrected.
Cheers
One other change that is on my build is page pool.
My page pool is 6 MB, and some Touch and vanilla (included the 4.02 i had) is only 4MB.
In my opinion that could be another issue to test.
My PDA is working just fine now.
Cheers
For me the problem was the OS Build.
I flashed my device with the same 4.02 vanilla but with a different OS buid and the Phoneworks great. Been using for 2 weeks now, never freezes or looses signal.
Cool
Thanks to Zecanillis advice! obrigado !
Hi All!
My brother is facing a strange problem with his Cingular branded 8525. Non of the new WM6.1(or even wm6) roms are woking with his phone except the one Build 19949 released by PNT dated 02-06-2008 (CE OS 5.2.19949 Build 19949.1.2.0.PNT.Full.rar) & the official roms for Hermes.
The major problem faced after trying to put any latest roms is that we are not able to see any pictures in any of the application. (e.g today screen, dialer skin, WMP skin, even photos taken from the camera). Top & bottom bar are ok, Os is booting without flash/welcome screens. After flashing /during booting we get a white screen insted of flash screen/welcomescreen.
He has cheked for the bad block using mitty but it dosent show any bad block there.
We will be really grateful if you can suggest any fix/solution for this strage problem.
Try reinstalling HardSPL,afterwards,go to HTC America's website,download and install last official WM5 (yes... WM5) & let us know if WM5 works on your 8525.If it does,install again HardSPL,then try to install aWM6 of your choice.
Good luck
Hi, joel32137!
joel32137 said:
Try reinstalling HardSPL,afterwards,go to HTC America's website,download and install last official WM5 (yes... WM5) & let us know if WM5 works on your 8525.If it does,install again HardSPL,then try to install aWM6 of your choice.
Good luck
Click to expand...
Click to collapse
Thanks for your promt reply.
Tried re-flashing HardSPL-2.10. Also tried flashing official WM5 rom & is working. I will now try reflashign Hard spl again as suggested by you & then flashing with PDAViet lateset rom. Will come come to you after that with results.
Thanks again.
Hi, joel32137!
joel32137 said:
Try reinstalling HardSPL,afterwards,go to HTC America's website,download and install last official WM5 (yes... WM5) & let us know if WM5 works on your 8525.If it does,install again HardSPL,then try to install aWM6 of your choice.
Good luck
Click to expand...
Click to collapse
I tried exactly what you have suggested, but no luck.
I flashed Hardspl -7 (olipro 2.10) > official wm5 ROM from cingular/Att > Hardspl again > then tried DVH's 19965 Rom
Please help!
Hey,
Don't know what else to tell you other than to try and re-download your DVH's 19965 file,it may be corrupt.As always,go back to WM5,then re-install HardSPL,then try to install your desired WM6.1 flavor of the week.Did you try DVH's 19214 or 20226? Both pretty good roms. I just installed 19214 from 20226 and it is noticebly snappier than 20226.
Good luck ;p
hemendra05 said:
I tried exactly what you have suggested, but no luck.
I flashed Hardspl -7 (olipro 2.10) > official wm5 ROM from cingular/Att > Hardspl again > then tried DVH's 19965 Rom
Please help!
Click to expand...
Click to collapse