Dear Friends I recently upgraded to Xplode ROM. Now my phone loses signal on and off. Only when I soft reset ,the signal comes back.When I receive the call ,I press Answer button, but this makes my phone hang for sometime. I tried to downgrade to 2003SE but the problem persists.
Siemens Sx66
ROW 5.70.11 WWE
ROM date 11/11/07
Radio 1.15.00
Protocol: 1337.45
try an other windows mobile 6 version
Related
I upgraded my Jasjar with the Radio 1.04.02 upgrade yesterday and everything appeared to go normally, but now I can't get any data through my GPRS connection. I can, however, send and receive calls, bluetooth works, and I can get a data connection through wifi.
It looks like the GPRS connection is active... I get the G symbol with the little arrows and if I click on it it tells me that it's connected, but if I try to download email or open a web page it just times out. I've tried soft resetting without success. I did not hard reset after the radio upgrade, so if no one else has any ideas I'll try that later this afternoon.
Brett
Just to follow up on this, I did wind up doing a hard reset last night and that did fix the problem I was having. I'm not 100% certain that it was caused by the radio update, but because that was the only thing that changed before I started having the problem I suspect it was the cause. Perhaps a hard reset *is* required after the radio update.
Brett
Hi all
Ever since I upgraded to the latest SPV M2000 ROM from the Orange website, my GPRS is much less reliable and regularly fails to connect resulting in the need for a Soft Reset, and I have also noticed my signal strecngth at home and work is at least 1 bar lower which in turn results in more GPRS problems.
Anyone have any ideas or experience the same problems
Hi,
My phone developed a strange problem from last 1 month. Whenever the battery comes below 50 %, the phone is not able to find the network and perennially keep s searching for it. I have tried soft reset, but of no use.
The phone otherwise also is very bad on the network strength. While, a nokia phone works fine at a particular place, my XDAIIs drops the network.
Anyone faced a problem like this?
_____________________
ROM: 1.40.00 WWE
Radio: 1.12.00
ExtROM: 1.40.923 WWE
My Sx66 phone shows weak signal which is otherwise strong
Most often my phone is not able to find the network and keeps searching for it. I tried soft reset, but the problem is sameof no use.
ROM : 5.60.00
Radio: 1.15.00
Protocal: 1337.45
Anyone for help.
Hi,
Need help on this one. My hermes is perfectly working fine for almost anything I flashed on it. Then all of a sudden 3G is not working anymore, I cant call, text or even browse of course. So i have no choice but to turn it off and activating with only standard GSM.
Hope that anyone could give me a bright soultion to overcome this kind of situation. This is the 1st time it happened to my hermes.
Thanks in advance.
Myke
-------------------------------
Softbank X01HT
IPL: 1.04
SPL: 2.10 Olipro
Radio: 1.54.30.10
4Gb microSDHC
Go to start/settings/Phone
Then select "BAND" and make in sure that "your network type" is on AUTO and AUTO on "select your GSM/UMTS band"
...didnt resolve the problem
Digitaly,
thanks for the reply unfortunately, it didnt work
Myke
I would try doing a reflash with the same rom first and if that doesn't work, then a different rom.
CaptMorgan said:
I would try doing a reflash with the same rom first and if that doesn't work, then a different rom.
Click to expand...
Click to collapse
I already reflashed it with the last ROM and still didnt worked.
I flashed it with the OfficialHTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108 and still didnt worked.
I flashed the radio back to 1.54.30.10 and still it didnt worked.
I flashed it official Windows Mobile 6.1 and still it didnt worked.
Then I went back to PDAVIET's 19400.... G mode
I tried turning off the hsdpa (without reset) while in 3g mode, i can call for at least 15 sec then the signal will not be available again so i have to switch back to GSM again to obtain signal .... anybody ...help?
are you sure that it's not a network issue? I Used to work for Wind Italy Mobile as a costumer service In Italy and network providers sometimes wile they are changing or repairing something from the cells they switch off the signal I would first phone your network to make in sure they are not messing about with your local cell.
Case Solve!
I just finished testing my hermes on other location, and my 3G has come alive! I therefore conclude that it was the providers cell site in our area who has problems in 3G connection because when i came back at the house, 3G is not working again. Digitally, thanks for the great info.
Hi,
I just tested out a couple new WM 6.5 ROMs (23009 and 21234) on my Toshiba G810 and noticed that I lose reception whenever the phone goes on standby for > 5mins. Whenever somebody tries to call me, it takes 4 rings until my phone finally detects the call but the kicker is after 4 rings, Rogers Canada automatically forwards the call to my voicemail (and this network ring setting cannot be changed).
Anybody else experiencing this issue on any device and have a workaround?
I have tried manually configuring the Network Mode to GSM + 850/1900 and setting the Network Selection to Manual but the problem still occurs. The only "solution" so far is reverting back to 6.1