Hi,
My phone developed a strange problem from last 1 month. Whenever the battery comes below 50 %, the phone is not able to find the network and perennially keep s searching for it. I have tried soft reset, but of no use.
The phone otherwise also is very bad on the network strength. While, a nokia phone works fine at a particular place, my XDAIIs drops the network.
Anyone faced a problem like this?
_____________________
ROM: 1.40.00 WWE
Radio: 1.12.00
ExtROM: 1.40.923 WWE
My Sx66 phone shows weak signal which is otherwise strong
Most often my phone is not able to find the network and keeps searching for it. I tried soft reset, but the problem is sameof no use.
ROM : 5.60.00
Radio: 1.15.00
Protocal: 1337.45
Anyone for help.
Related
I upgraded my Jasjar with the Radio 1.04.02 upgrade yesterday and everything appeared to go normally, but now I can't get any data through my GPRS connection. I can, however, send and receive calls, bluetooth works, and I can get a data connection through wifi.
It looks like the GPRS connection is active... I get the G symbol with the little arrows and if I click on it it tells me that it's connected, but if I try to download email or open a web page it just times out. I've tried soft resetting without success. I did not hard reset after the radio upgrade, so if no one else has any ideas I'll try that later this afternoon.
Brett
Just to follow up on this, I did wind up doing a hard reset last night and that did fix the problem I was having. I'm not 100% certain that it was caused by the radio update, but because that was the only thing that changed before I started having the problem I suspect it was the cause. Perhaps a hard reset *is* required after the radio update.
Brett
I have recently changed to wm6, and changed radio rom.
I now have a problem with my signal.
When I start up my signal is great.
If I drive around for a while I get a no signal icon and "no signal" message.
If I manually switch a band to any variation I get the signal back.
I have changed roms, radio roms and varied all the settings but I still get this problem.
Anyone have any ideas ?
Signal drop
trettear said:
I have recently changed to wm6, and changed radio rom.
I now have a problem with my signal.
When I start up my signal is great.
If I drive around for a while I get a no signal icon and "no signal" message.
If I manually switch a band to any variation I get the signal back.
I have changed roms, radio roms and varied all the settings but I still get this problem.
Anyone have any ideas ?
Click to expand...
Click to collapse
Hmmm let me guess Cingular customer??
what radio are you using??? if you are in the US, try using 1.40 radio, im using that one and its great, but i am on T-Mobile US...if you are on the UK 3G band, then try 1.43
I'm in South Africa... Not Cingular...tried 1.40... no change to the problem though
Have you tried going back to the radio you were previously using before this happened?
david.dupuis said:
Hmmm let me guess Cingular customer??
Click to expand...
Click to collapse
Thats pretty f***ed up. I have Cingular and dont have a problem. Signal all depends on what Radio you have.
trettear said:
I'm in South Africa... Not Cingular...tried 1.40... no change to the problem though
Click to expand...
Click to collapse
There are several more radio versions after 1.40 you should read up and see what radon would work best in South africa.
I was using wm5 with 1.3? but others in SA are using 1.40 with no problems.
Hi guys!
I recently upgraded to WM6, but left my radio at 1.40.
I am having BIG BIG problems.
All of a sudden, I could have 5 dropped calls in two minutes.
I notice that whenever the phone goes into "3G", signal strength drops (sometimes to one bar), and it's terrible.
I am not sure if there is a way to disable 3G, and remain in EDGE, or if I should try to get my hands on 1.43 or even 1.41.
What's strange is that when I went from WM5 to WM6, I did NOT upgrade the radio.
I'm on Rogers in Montreal.
It's beyond horrendous!
I´ve experienced problem when loosing connection to 3G Network. When I loose the connection it will not connect again. Many times I´ve been forced to softreset the device to be able to get signal again.
I have tried different radio versions.
Perhaps this is due to local network comviq. Im not sure.
Anyone got a clue how to solve this?
Im using a Vario II with Black Shadow and radio 1.41 on Comviq, everything works like a charm. Might depend on where you are? I've had some connection problems in the UK (mainly crashes when the phone switches between 2G and 3G) but nothing at all in Sweden.
Dear Friends I recently upgraded to Xplode ROM. Now my phone loses signal on and off. Only when I soft reset ,the signal comes back.When I receive the call ,I press Answer button, but this makes my phone hang for sometime. I tried to downgrade to 2003SE but the problem persists.
Siemens Sx66
ROW 5.70.11 WWE
ROM date 11/11/07
Radio 1.15.00
Protocol: 1337.45
try an other windows mobile 6 version
Hi,
Need help on this one. My hermes is perfectly working fine for almost anything I flashed on it. Then all of a sudden 3G is not working anymore, I cant call, text or even browse of course. So i have no choice but to turn it off and activating with only standard GSM.
Hope that anyone could give me a bright soultion to overcome this kind of situation. This is the 1st time it happened to my hermes.
Thanks in advance.
Myke
-------------------------------
Softbank X01HT
IPL: 1.04
SPL: 2.10 Olipro
Radio: 1.54.30.10
4Gb microSDHC
Go to start/settings/Phone
Then select "BAND" and make in sure that "your network type" is on AUTO and AUTO on "select your GSM/UMTS band"
...didnt resolve the problem
Digitaly,
thanks for the reply unfortunately, it didnt work
Myke
I would try doing a reflash with the same rom first and if that doesn't work, then a different rom.
CaptMorgan said:
I would try doing a reflash with the same rom first and if that doesn't work, then a different rom.
Click to expand...
Click to collapse
I already reflashed it with the last ROM and still didnt worked.
I flashed it with the OfficialHTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108 and still didnt worked.
I flashed the radio back to 1.54.30.10 and still it didnt worked.
I flashed it official Windows Mobile 6.1 and still it didnt worked.
Then I went back to PDAVIET's 19400.... G mode
I tried turning off the hsdpa (without reset) while in 3g mode, i can call for at least 15 sec then the signal will not be available again so i have to switch back to GSM again to obtain signal .... anybody ...help?
are you sure that it's not a network issue? I Used to work for Wind Italy Mobile as a costumer service In Italy and network providers sometimes wile they are changing or repairing something from the cells they switch off the signal I would first phone your network to make in sure they are not messing about with your local cell.
Case Solve!
I just finished testing my hermes on other location, and my 3G has come alive! I therefore conclude that it was the providers cell site in our area who has problems in 3G connection because when i came back at the house, 3G is not working again. Digitally, thanks for the great info.