Related
Hey all, need some help here.
short story - can't power up my device, since power botton stopped working.
anyonw knows a way to turn on the device otherwise?
(tried reset by reset button, plug to pc, to charger..)
longer story- yesterday i realized i can hear only on speaker phone, so i thought it is a bug and tried to reset the device (soft) and realized the power button isn't working as well, which increased my suspicion of a bug, and smart enough i just unplugged the battery and since then can't turn it back on..
thanks
I have same problem several times, and I have no idea why these happen, any ideas?
When its happen, I try call from another phone to my, and nothing happen phone not ring, but I heard normal sound from calling phone.
I would see if I could get the phone to hard reset. I know you need to push the power button but it may work for this purpose just not tell the software to turn back on.
Hard Reset:
With phone off push and hold the send and end buttons while pushing the power button. Follow screen instructions.
If you cant then you will have to return it I am guessing.
Nothing
nope, i tried also to hard reset but nothing works, as time goes i get the feeling that the phone is ok but the power button is the one breaked.
i guess i have to take it to a lab sometime this week.
thanks anyways
Hi Lads,
My HTC touch diamond is doing strange, one day I woke up and suddenly it gave me a Red,Green,Blue,White screen. As I understood it's called bootlloader or something like that.
I tried reset+volumebutton after that it is starting normal and Ive got my phone back, but if I turn my phone back off its gaving me the terrible Red, Green, Blue, White screen back.
Ive tried to do a hard reset ( reset button + volume + round button) but then I have to press the volume button again to accept, but it isnt doing anything then.
Ive looked for some solutions but everything is chinese for me.
I just want my phone back to normal and I hope I dont have to loose all my files.
Can anyone help ?
I posted this in the question thread but some guy told me to post here.
Some other guy told me to reinstall my ROm but I have NO CLUE at all what I should do and what ROM is.
I didn't thought it would be such a big problem because I can still start my phone, it just gives me that ****ing Red, Green, Blue White screen and it says : serial at the bottom if I press Reset + volume down it starts as normal, but if I start it again I got that screen back.
Can anyone help me, sorry if there is already a solution be discussed on this forum, I didn't found it.
Please note that I am a dummie at this point.
Thanks
jonaszw said:
Hi Lads,
My HTC touch diamond is doing strange, one day I woke up and suddenly it gave me a Red,Green,Blue,White screen. As I understood it's called bootlloader or something like that.
I tried reset+volumebutton after that it is starting normal and Ive got my phone back, but if I turn my phone back off its gaving me the terrible Red, Green, Blue, White screen back.
Ive tried to do a hard reset ( reset button + volume + round button) but then I have to press the volume button again to accept, but it isnt doing anything then.
Ive looked for some solutions but everything is chinese for me.
I just want my phone back to normal and I hope I dont have to loose all my files.
Can anyone help ?
I posted this in the question thread but some guy told me to post here.
Some other guy told me to reinstall my ROm but I have NO CLUE at all what I should do and what ROM is.
I didn't thought it would be such a big problem because I can still start my phone, it just gives me that ****ing Red, Green, Blue White screen and it says : serial at the bottom if I press Reset + volume down it starts as normal, but if I start it again I got that screen back.
Can anyone help me, sorry if there is already a solution be discussed on this forum, I didn't found it.
Please note that I am a dummie at this point.
Thanks
Click to expand...
Click to collapse
do you have hard spl??? if yes try to use mtty then flash a rom...if not flash http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705 then use mtty then flash another rom
Hello
jonaszw said:
Hi Lads,
My HTC touch diamond is doing strange, one day I woke up and suddenly it gave me a Red,Green,Blue,White screen. As I understood it's called bootlloader or something like that.
I tried reset+volumebutton after that it is starting normal and Ive got my phone back, but if I turn my phone back off its gaving me the terrible Red, Green, Blue, White screen back.
Ive tried to do a hard reset ( reset button + volume + round button) but then I have to press the volume button again to accept, but it isnt doing anything then.
Ive looked for some solutions but everything is chinese for me.
I just want my phone back to normal and I hope I dont have to loose all my files.
Can anyone help ?
I posted this in the question thread but some guy told me to post here.
Some other guy told me to reinstall my ROm but I have NO CLUE at all what I should do and what ROM is.
I didn't thought it would be such a big problem because I can still start my phone, it just gives me that ****ing Red, Green, Blue White screen and it says : serial at the bottom if I press Reset + volume down it starts as normal, but if I start it again I got that screen back.
Can anyone help me, sorry if there is already a solution be discussed on this forum, I didn't found it.
Please note that I am a dummie at this point.
Thanks
Click to expand...
Click to collapse
after you get a hardspl " see in athachament " , remove the batery Then put the batery, after that press the Power button + volume down and you enter the boot loader menu, after that install ROM of your choice
Good Luck, Marius.
I just updated my ROM I guess ? or what is it ... I pressed update and now I got SPL-1.40.OliNex.
But I still get the screen, can anyone tell me which rom I should install now and where I can find it ?
I want the standard ROM back like I bought my diamond.
EDIT ive installed ROM that I downloaded at the HTC website an update. Ive installed it but it is still not fixed when I star my phone I still get bootloader.
Back to the ROM then : if I start it it get struck when I have to Line out my stylus or how do you call it in english, it keeps asking again it always starts again.
CAN ANYONE HELP ^^? I am despered
Must be a solution ....
I had the same problem before, my Htc Diamond always goes into bootloader mode, the problem is that the volume down button is stuck from the tack button itself not the outside part of the button, on my diamond there was moisture in between the tack button contacts, all I had to do was replaced the button and everything works as it were brand new.
Should I buy new ones and where can I buy it ? How should U put thhem in.
I pulled out the old buttons, let it rest and after a few hours I put them back but its still the same :S. How have you fixed it ?
The button that I was talking about is inside the the outer physical button, its a tiny circular tack button you have to disassemble the other half of the Diamond to get into it and do some soldering on the button's board but don't do this yet.
I suggest try to do a soft reset on the phone, then as soon as you release the reset button hold down the volume up key to see if it boots into winmo " that's what I was doing to my diamond before just to get into winmo and not on boot loader or the tri color", if your phone boots into winmo without any problem while pressing the volume up key then its definitely the volume down button is having problems. and also before, does your diamond most of the time gets a little bit warm to the touch? even for a short phone calls? that was the first symptoms i had on my diamond before the actual key is messin' up
the tack button i got from another phone with the same size of button and had to solder it on the volume assy. pcb.
your problem is not a software issue but a hardware Malfunction. (majority of the people here are experts on software but I myself is the opposite)
After devunlocking last night, now my phone is messed up
The problem is the back,windows and search button no longer work, the portion of the screen that they take up is now like an extension of thescreen it just selects stuff as if it were at the bottom of the screen. Any help to reset all the files in root to factory, I tried to hard reset and soft reset.
Maybe I screwed up the registry or some files. Thanks for any help
try factory reset. hold camera + volume down + power. when phone vibrate release power button while holding the other 2 buttons. should prompt you to reset your phone. hope that works
Thx
I tried that but it enters USB Host mode, I also tried holding down up and down volume and power button to reset which resets it but doesn'tfixmy problem. it's acting like the part of the screen where the windows, search and back button are are now part of the regular screen and those 3 buttons no longer do anything.
This sounds rather like a hardware error. Your calibration of the touchscreen is messed up. I suggest you send it in. You still should have warranty?!
Btw. I don't think this has a connection to unlocking the phone!
If the phone hasn't been tampered with physically, it should be enough to just sync it without re-unlocking it, and it should be locked again.
Thx
I got a new one on the way. I didn't delete any files or regedit a bunch of stuff just a standard dev unlock and it started acting squirrly.
Hi Guys,
I have my N7100 for almost 3 months now and yesterday my son accidentally spilled water on it. The whole unit did not get wet, just the side where the volume rocker is. And it switched off by itself. I removed the battery and let it dry for a few hours. I switched it on and yes it did turn on but one volume button ( - ) is not working and the back and menu keys are not working also and it does not recognize any touch on the screen but when I used the S-Pen it recognized it. It's a rooted, heavy customized and tweaked phone. I noticed that it went to "safe mode", it was indicated on the lower left side of the screen and all installed apps were gone. DPi value went into default. I tried to install some apps, it went successfully but I can not find it in the apps drawer. I went into recovery mode, hoping to remove it in safe mode (foolish me, did not even tried to read or search on xda for possible fix), re-flash a custom ROM but same thing. I also found that the two water damage indicators inside the phone turned pink. The components inside were dry when I opened it, but because I am eager to fix it I tried using a hair dryer to (of course) dry it a little bit without damaging anything. After a while I put everything all together, switched it on and it now recognized "touch". But issues with volume key ( - ) and menu&back buttons still remain and it is still in safe mode. I decided to restore it to factory default via recovery mode, I cleared everything, reformatted system, data, all menus with the word "reformat' I pressed them all. Restarted the phone and it just stays on the logo where it says "Samsung Galaxy Note II GT N7100". Tried to go back to recovery mode but with no avail. I tried to go to Download mode also, I was able to make it to the part where it says "press volume up to continue; press volume down to cancel" I then pressed volume up but nothing happens. I pressed the volume up and same thing. Tried to charge it while it is switched off, the battery icon charging appeared, it shows the circle animation but it does not animate and it doesn't animate also like it's charging itself. Plugged it into my laptop and it doesn't recognize it. I've been reading some XDA articles and I only came acrossed one possible way to resurrect it...To get Download Mode without 3-button combo using homemade JIG. Well, I know for a fact that I need to send this to Samsung Service center but I am still hoping that someone here might help me or I may still find other alternative solutions without spending a lot of $$$ in sending it for a repair. Thanks in advance!
Apparently u have formatted system partition. Have u try flash via PC odin? Maybe the download mode will work with odin
Yeah, that's what I thought also. Foolish me! Apparently I can't even try Odin since my laptop does not recognize the phone. I can't even go to the download mode. It was stuck on the part where it says Volume Up: Continue, Volume Down: Cancel.
hmm.. seems like the hard key for the volume are done for. since u already disassemble it, cant u use the manual way to press? it u able to go into download mode, the driver will auto download, well at least it auto download for me
Tried that also mate, but no luck. I think the phone does not recognize the volume rocker. I just noticed that when I pressed and hold the menu key plus the power button it goes to the page where it says volume up: continue...where you are supposed to press volume down+power+menu key right? I tried to press the volume up key to continue but no luck. I was browsing xda the whole day to search for an answer before I send this so Samsung service center. I tried a homemade jig so I can go to download mode but it does not work. I have read that other SGNII users were able to make it work. On the instructions it says to use 3pcs of 100K ohm and a 1k ohm resistors but I used 6pcs of 50k ohm + 1k resistors (since I can't find any 100k ohm resistor on any electronic store near my place) connected it to pin 4 and 5 of a micro usb plug and still no luck, nothing happens. Tried some several combinations.
I have don't have good sleep since my Note II died...Haven't eat properly...Yeah, you read it right...hahaha..Still trying to search for possible fixes, it's 12:40am now and I am almost sleepy, if I still can't find any solutions until tomorrow then I will be sending this to Samsung Service center
or....if Adam will reply on this thread http://forum.xda-developers.com/showthread.php?p=39387670 then I am willing to dismantle and do whatever he wants me to do just to resurrect the phone...
Can you go into recovery mode? If yes try adb reboot recovery or reboot to bootloader if you have twrp.
this is XXXDDDAAA
Like what I explained on the first post mate, Recovery and Download modes are not possible/can't access them...
red_hanks said:
Hi Guys,
I have my N7100 for almost 3 months now and yesterday my son accidentally spilled water on it. The whole unit did not get wet, just the side where the volume rocker is. And it switched off by itself. I removed the battery and let it dry for a few hours. I switched it on and yes it did turn on but one volume button ( - ) is not working and the back and menu keys are not working also and it does not recognize any touch on the screen but when I used the S-Pen it recognized it. It's a rooted, heavy customized and tweaked phone. I noticed that it went to "safe mode", it was indicated on the lower left side of the screen and all installed apps were gone. DPi value went into default. I tried to install some apps, it went successfully but I can not find it in the apps drawer. I went into recovery mode, hoping to remove it in safe mode (foolish me, did not even tried to read or search on xda for possible fix), re-flash a custom ROM but same thing. I also found that the two water damage indicators inside the phone turned pink. The components inside were dry when I opened it, but because I am eager to fix it I tried using a hair dryer to (of course) dry it a little bit without damaging anything. After a while I put everything all together, switched it on and it now recognized "touch". But issues with volume key ( - ) and menu&back buttons still remain and it is still in safe mode. I decided to restore it to factory default via recovery mode, I cleared everything, reformatted system, data, all menus with the word "reformat' I pressed them all. Restarted the phone and it just stays on the logo where it says "Samsung Galaxy Note II GT N7100". Tried to go back to recovery mode but with no avail. I tried to go to Download mode also, I was able to make it to the part where it says "press volume up to continue; press volume down to cancel" I then pressed volume up but nothing happens. I pressed the volume up and same thing. Tried to charge it while it is switched off, the battery icon charging appeared, it shows the circle animation but it does not animate and it doesn't animate also like it's charging itself. Plugged it into my laptop and it doesn't recognize it. I've been reading some XDA articles and I only came acrossed one possible way to resurrect it...To get Download Mode without 3-button combo using homemade JIG. Well, I know for a fact that I need to send this to Samsung Service center but I am still hoping that someone here might help me or I may still find other alternative solutions without spending a lot of $$$ in sending it for a repair. Thanks in advance!
Click to expand...
Click to collapse
the problem is because your volume rocker key and power button are shorted due to water content.. i recommend that you take it to a service center before something worse happens... dont turn on your phone again until its cleaned properly and dried.. take it to proper service ... else its very bad for your device.. coz it can get permanently dead
Yeah, that's what I am going to do today. I surrender can't find any solutions anymore. Will keep you guys posted. Thanks anyway!
It's with Samsung Service Center now. It's OOW and they were able to find out that it was rooted (of course!) I paid Php1,200 under the table (on one of the technicians) and now it's In-Warranty again hahaha, but I have to leave the phone for a couple of days or weeks since they need to replace some hardwares. I think that's the best thing I can do instead of paying more for an OOW repair. sad sad sad..weeks without my phone with me...going back to my old phones for the meantime...
So I activated Universal Switch on S6 Edge to check it out, something went wrong in the settings (long story short, got a pop up while setting it up), now screen unresponsive.
It works, I just get this blue horizontal line scanning the screen and nothing else but the power button and home button works. Tried safe mode, no bueno. How can I disable US feature without resetting to factory or at least no data wipe (if possible!)?
Android 5.0, rooted with pingpong, no custom recovery, knox 0x0.
All help is appreciated.
Same
[The exact same thing just happened to me someone please help
Fixed!
The way I had fixed this is by holding down the power button, both up and down sound buttons, and the home button until it restarted. When the device turned back on it gave the option to turn the setting off. Hope it helped!
ImJustBoss99 said:
The way I had fixed this is by holding down the power button, both up and down sound buttons, and the home button until it restarted. When the device turned back on it gave the option to turn the setting off. Hope it helped!
Click to expand...
Click to collapse
it works , thanks so much buddy , i love you:good:
how to turn off universal switch
hit home button 3 times
Thanks alot
It worked buddy
It doesn't give me the option to turn it off
Hi,
I have been struggling with Universal Switch on a Samsung S5 Neo. I switched it on, but was never able to switch it off again.
These are findings so far:
-> Did a factory reset using "Sound Up", "Home" and "Power" button simultaneous.
-> The device comes back and wants to configure itself again.
-> I restored my settings from Google, but this immediately brought back "Universal Switch"
-> Factory Reset again and configured the device, but told Google that I want to use it as a "New Device".
-> Now I can use my device in a proper way.
-> In Google Play Store I find all my Apps which were linked to my account and reinstalled them and I am back in business again.
-> Took me half a day to sort this out.
The programmer who designed and programmed this should be hung and shot and poisoned, because this is absolute Crapware.
Hope this helps for all the others who are suffering.
You can also push the home button three times and it should turn it off.
thank u ur the best
Ok, so i have exactly the same problem except my home button doesn't work
Anyone one know how to sort this without having to take it in to a store?
I was faced with this problem before and looked everywhere and couldnt find a fix. This was a while ago. So I dont remember what I did to clear it. I was cleaning off the screen and touched the home button as I was wiping it off and the problem began again.... I just came across your comment because all the others failed. I pressed the home button 3 times quickly and the blue lines stopped scrolling. In addition, I went over the accessibility and I turned off the "Universal Switch" option as much as the option allows. I hate this function. I do not use it or need it (for my needs). I hope I can remember what to do next time this happens. I swore to myself I would remember last time, but apparently that wasnt a guarantee. This time, I will write it down and put is somewhere I know I will find it next time I see these nefarious blue lines scrolling. Hopefully I wont see it again since I disabled it more than it was to begin with. Thank you ever so for commenting. You saved me a lot of frustration!
great fix
CarlyCraig said:
hit home button 3 times
Click to expand...
Click to collapse
thank you for posting the only sollution that works.
Hello,
I have activated Universal Switch option Screen - Volume Increase button on S6 Edge upgraded version of android 6.0 and but it messup everything.. I am now unable to access any feature on screen.. none of the button are working on screen.
I have also tried rebooting it with the option suggested by you.. but I am locked due to password protected... My device not asked to disable Universal Switch option after reboot as well..
Please help, how to get this Function Disable, without affecting my data as I do not wish to loss any of my data..
So what the heck is that scanning blue line option supposed to do?
My home button is not working, now tell me how do i get out this situation
Akki167 said:
My home button is not working, now tell me how do i get out this situation
Click to expand...
Click to collapse
Have you tried pressing it rapidly three times?
It happens to me too, have you solved this problem? Please tell me what to do im freaking out right now
me too @Alifanasya
same issue
it works with OTG cable + mouse