Related
This is an awful little thing. Is there a way of removing it without having to prevent all O2 extended ROM stuff from installing? Or is it an all or none thing?
Couldn't find it in the forums.
Joe
go to foder start up in windows and delete the file name: conecntionink (not sure but the icon is green palm). Soft reset and you wont see the o2 icon next to the start icon anymore,if you want to remove the O2 active, you must go to foder Font in window, change the name of the file in Font foder and go to setting to remove O2 active => soft reset and that 's it.
Be careful. I recently removed that horrible 02 icon, and the next time I took the battery out my phone hard-reset itself causing me to loose a load of recent photos. I don't know if these event were linked, but my phone never did that before. Just a warning xx
you can set the xda2S into corporate mode but this means doing a hard reset. when installing it will give you an option of a personal installation or a corporate. for the corporate mode you will have to enter this code 0506 by doing this it completely removes all of that o2 active crap. however it will still setup your gprs which is a bonus.
there is another way to do this so you don't have to do a hard reset but i think this is the easiest just remember to back up your files.
Maybe something like this should be made into a sticky ???????
and as using the o2 icon is a way of switching off GPRS, then once its gone, you cannot disconnect with that, you can on the other hand, press and hold the red hang up button on your blueangel 8)
Thanks for the replies, and I will do what you all say and see what's best.
If I go the corporate 0506 route, I guess it tells it to install all the non-O2 stuff and leaves out the O2 icon, and the O2 today screen stuff. Is this correct?
Also, if anyone has any ideas about my audio niggle, then please have a read and reply to my other thread from 13/6/5.
This forum is great and I will soon start playing with ROMs and get with the cookery.
Joe
yep with the corporate way you will just get the standard windows 2003.
and as using the o2 icon is a way of switching off GPRS, then once its gone, you cannot disconnect with that, you can on the other hand, press and hold the red hang up button on your Blueangel
Click to expand...
Click to collapse
OH GOD! Thankyou! That's the first time I have ever been told that! Every time I have asked, I've just been told to turn on flight mode temporarily.
mike freegan said:
and as using the o2 icon is a way of switching off GPRS, then once its gone, you cannot disconnect with that, you can on the other hand, press and hold the red hang up button on your Blueangel
Click to expand...
Click to collapse
OH GOD! Thankyou! That's the first time I have ever been told that! Every time I have asked, I've just been told to turn on flight mode temporarily.
Click to expand...
Click to collapse
no probs, i askd and someone on here gave me the pointer, .
Ok, I am getting increasingly frustrated trying to resolve an issue... my Xda O2 IIs keeps "waking itself up" ....aaaargh!!!
I hit the power button on the top to shut off the display (it saves power and enables me to lock the other keys from being accidentally pushed) but after a very short time, the screen comes on by itself, and I can't figure out WHY!!!!
While just sitting on my desk or out on the road, not in the cradle, I noticed, from time-to-time, that the "G" Icon at the top is often replaced by an "x" and the 'left/right sync arrows' ...so I naturally thought it was trying to connect to something.
I thought it might be trying to connect to GPRS, so I removed the connection. It didn't fix the issue.
I thought it was a Bluetooth File Transfer issue, so I deleted that connection also... still no resolve.
I checked my ActiveSync settings, and it all looks ok.
PLEASE HELP, it's killing the length of life in my battery on a daily basis!!!
i had the same problem when i was on the o2 rom, i sorted it by getting shut of the o2 rom and installing the imate 1.40 rom.... it runs faster,better and never needs soft reseting, with the added bonus of wm10.
but i kinda came to the conclusion that when the fone itself talks to the network every so often, ( ya know when u get interferance when its next to a radio or ur desktop speakers.) as it did it at those times, maybe u should stick it next to something and see if u get the radio interference, and see if it does this in flight mode......
also maybe think about removing the o2 active if u have that, and as a last resort, if no-one else can halp with a fix, maybe think about upgrading to imate 1.40 rom...
Mine did this for a while. I can't remamber the EXACT setting, but it was activesync trying to sync on a schedule (like every 5 minutes) over WAP.
If its the same problem, a bit of rummaging around the activesync settings should sort it out.
-Mike
Thanks joey jojo. Thanks mike freegan.
Joey, where can I get iMate 1.40 ??? Although, I really don't want to use the iMate rom. Ideally, I'd like to find and fix the problem I'm having with this O2 rom.
Mike, I checked my ActiveSync settings on the device... everything looks ok to me. Under ActiveSync/Tools/Options/PC Synchronization: 'Use this PC' is set to ZEUS (which is my computer name) and the other two boxes are UNchecked for 'Use mobile schedule to sync with this PC' and 'Sync with this PC during manual sync' ...then when I click on the Options button, the 'When cradled' dialogue appears, the checkbox for 'Enable PC sync using this connection:' is CHECKED and the connection to use is set for 'USB' . Then, under the 'Mobile Schedule' tab, everything is set to 'Manually'.
BTW, when I put the device in 'Flight Mode' ...it doesn't mysteriously 'wake-up' by itself.
I agree, it appears to be trying to use GPRS to 'connect' or 'sync' with something... I just can't seem to find what or where the cause is located. Aaaargh!!! Any other ideas guys?? Anyone else?
XDA III IIs IIi Waking UP
I've found that if I leave my bluetooth switched on it does this I'd love to have my bluetooth on all the time but as it does this I have it off unless I'm using my GPS.
Can this be fixed ?
Thanks Carl n Adele,
I tried your suggestion, shutting off BlueTooth, but after doing so, and then pressing the power button, the device STILL wakes-up after about 20-30 seconds. So, that wasn't the problem.
Is there any O2 subscribers that can call O2 Tech Support and ask some questions? I'd even call myself if I could pretend to be someone else. Just a thought, if there was anyone willing to help out.
i will try to get u xda support number, i work at o2 so i might be able to ask someone too... tho i guess they wont know, cos there idiots.... lol
I had this problem too. Found that Activesync was still running in the background and was using "mobile schedule" to sync via GPRS (even when set to manual), check that ActiveSync does not appear in the Running program list...
Thanks joey jojo, I really would appreciate the help!
m4ttyw, you are correct, ActiveSync was running in the background. But I had set everything in ActiveSync to MANUALLY SYNC. Nevertheless, I STOPPED ActiveSync in the Running Programs List, then pressed the Power Button again, and with fingers crossed and holding my breath, I waited to see if the device would 'wake itself up' again... and... sure enough, it did. Same thing as always! DAMN! Nice try though, thanks.
This is really frustrating me. The manual shows NOTHING about that Icon at the top if the screen (see earlier message in this thread) and what it is doing, so I can only think that is is still trying to connect or sync something... AAAAAAAARGH!!!!!!
Hmmmm, I wonder if it might have something to do with the GSM Band setting? It's currently set to Automatic, I am not sure what it SHOULD be set to for Rogers in Canada???
Darn think waking up
checked all my settings and its def the bluetooth causing my problems
Not mine, Carl... I have BlueTooth SHUT OFF and the device still wakes up by itself!!!
NEW Observation: When the device wakes-up, it takes about 5 seconds before the "G" icon changes to the 'sync' icon with the 'x' (see pics earlier in this message thread) but, I've noticed that signal strength drops off to nothing except a few dots "..." as if it were searching for a signal. And then, immediately comes back to normal signal strength.
sol
This is sometimes caused by a conflict between ur current radio stack and the frequency ur network is using.
What i mean is, the 'G' icons only represents the availability of gprs in ur current coverage area.By default, ur phone syncs with ur provider every x interval
in seconds, by which the state of gprs availability is changed (Hence,its icon) in ur case, ur pda wakes up whenever ur pda syncs with ur network. A temporary solution would be to choose a network configuration (under settings - connections) which doesnt have a gprs connection. This might, or might not cure it. The best thing to do in my opinion is to change ur current Rom ( or atleast ur radio Rom) that would definately cure the problem.
Try both solutions and post.
Sorry for my worse english.
I met this problem for several times, and it seem to cause by active sync inside the PPC.
I have to connect it to PC and have a Sync Operation,then solve it .
My Device :
Simpified Chinese Dopod 696
The Version Number is fogotten Because I had upgraded it .
Thanks gz_lgz,
I think you are CORRECT!!!! I started to think about what you said in your message, and decided to INSTALL the NEW VERSION of ActveSync 4 on my desktop pc.
After installing ActiveSync 4, I did a sync, removed device from cradle, pressed the power button on the device and waited... and waited... and waited... and waited... and waited... and waited... AND it did NOT WAKE ITSELF UP!!!
It seems there was something happening with the ActiveSync installed on the device that was not working properly and therefore kept trying to sync itself again & again, but since installing the new version of ActiveSync, it corrected the problem.
NOTE: I suppose that uninstalling and reinstalling the OLD version of ActiveSync may have done the same thing... but I never tried to do that.
Nevertheless, I am very happy that it is working properly now!!!
Thanks EVERYONE for your time and patience and WILLINGNESS to help!
Gentlemen,
After upgrading to the latest Dangaard ROM I've got a problem that seems to have the same root cause although the symptoms are slightly different.
If Bluetooth is switched on and my hands-free Logitech is paired with the Blueangel, it wakes up every minute. Once the hands-free is switched off, the device sleeps normally. Another lame thing is if the phone call is long enough for the device to go to the sleep mode (longer then 1 minute in my case), the Bluetooth connection is dropped and the sound is transferred to internal speaker.
There is no need to mention that Activesync is stopped. I'm quite sure that all these problems have something to do with the power management of the device. That's why I'd like to ask if somebody uses any additional software for the power management and if you've got any recommendation on the subject.
Hope it could help us to get rid of the problem. Any help is greatly appreciated. My device details are mentioned in the signature.
PS. Thanks to all the contributors to this wonderful forum. I must admit that the idea of BlueAngel was as great as the implementation sucks...
Update: Check this out: http://forum.xda-developers.com/viewtopic.php?t=21235
I think this workaround is good enough.
just a thought, but open active sync on your xda, and make sure that on the PC tab, the box marked 'use mobile schedule to sync with this pc' is not ticked and the other marked 'sync with this pc durin manual sync' IS ticked
also on mobile schedule tab, all selections are set to manually, and the box marked 'sync outgoing items as they are sent' is not ticked.
dunno if that will help, but its a thought anyway!!!
joey 8)
Guinness said:
Thanks gz_lgz,
I think you are CORRECT!!!! I started to think about what you said in your message, and decided to INSTALL the NEW VERSION of ActveSync 4 on my desktop pc.
After installing ActiveSync 4, I did a sync, removed device from cradle, pressed the power button on the device and waited... and waited... and waited... and waited... and waited... and waited... AND it did NOT WAKE ITSELF UP!!!
It seems there was something happening with the ActiveSync installed on the device that was not working properly and therefore kept trying to sync itself again & again, but since installing the new version of ActiveSync, it corrected the problem.
NOTE: I suppose that uninstalling and reinstalling the OLD version of ActiveSync may have done the same thing... but I never tried to do that.
Nevertheless, I am very happy that it is working properly now!!!
Thanks EVERYONE for your time and patience and WILLINGNESS to help!
Click to expand...
Click to collapse
ah, i didnt read that before my last post, ok, glad to hear you sorted your problem out tho!!!
joey 8)
i get the same problem with mine - ever since i turned my active sync onto manual it started with the problem so i turned it back to automatic.. just seeing if that fixed the problem i've been having..
also Downloading the lastet Active sync 3.8 and see if that helps..
I've figured out that its Sprite Backup Software v3.0 thats causing my XDAIIs switch on all the time. Disabling the Scheduled Backup seems to resolve the problem.
However, I've upgraded to SBSv3.14 which works even without turning off Scheduled backup.
Hope this helps
So I have a Tmobile Dash/HTC S620 and as this is a work project to compare PDAs for our org, I planned to unlock it so that I could try various services with it and do a good comparison for my boss.
I went out to http://www.gsmliberty.net/shop/tmobile-dash-unlock-p-1313.html and bought the $40 dollar unlock code, downloaded Dashv2Unlock.exe, followed their instructions and now I get a bloody error saying: "A monitor program prevents this application from execution. Stop the monitor program and try again"
I'm pretty well pissed off with it at this point, given that I just wasted half a day on this process and haven't fixed it. A quick run down on what I did to troubleshoot it:
1. kill symantec corp auto-protect
2. check permissions
3. run Process Monitor on it (see sysinternals.com) and came up with nothing.
4. killed every living bloody process I could get away leaving active sync working with using Process Explorer (again see sysinternals.com).
5. uninstalled & reinstalled activesync.
6. tried it on a different computer.
7. tried it on yet another computer that's not related to work.
and more, and more.
I'd like to note that after looking at the program, and looking at the signatures, gsmliberty.net didn't even write the program . It's orginally from http://www.imei-check.co.uk/dashunlock.php which I also downloaded and tried (hoping for a different version that would fix it).
My question is this:
has anyone else run into this problem? What's the deal here?
Thanks,
Rich
I posted the CSV from ProcMon and the orginal screeshot that shows the error as well as how far I trimmed the processes at one point.
So it turns out...
I went back and forth with gsmliberty and finally gave up with them.
http://www.imei-check.co.uk on the other hand was extremely helpful and after playing email tag we finally figured out that Active sync 4.5 is the problem. Use Activesync 4.2 not 4.5 and you'll be fine.
Rich
that's weird because I did my s620 last night with activesync 4.5 with gsmliberty. Also if people are trying to put the tmobile dash wm6 firmware on the oem htc s620 you have to follow the instructions in the official wm6 released thread. DONT USE the unlocker program that came with the gsm liberty file. You need to use the unlock program from IMEICHECK. Nothing bad will happen, it's just when you hexedit everything, it's being hex edited for the dashv2unlock.exe from IMEICHECK, not GSMLiberty. You UNL file will work with either or.
WM6 running here np.
I am running WM6 and purchased the unlock program and code from IMEICHECK about a month ago. Worked fine with WM5. Now I get the same errors as you. Are you saying that I need to purchase the same thing from GSM Locker? I still have my unlock code. Can't I just download the unlock program from somewhere?
I NEED A SOLUTION FOR THE WIFI ,NOTHING WORKED!!it works sometimes,,,the problem is the famous problem of starting it,,,the lamp flashes but the tower doesnt show,,,!
i used every known rom and 2003se and wm5 nothing helped it works sometimes and someother times not,,,,,
it needs soft reset sometimes,,,and some times very resistant
my radio version now is 1.15 and 3.5.2 R5 wm5 and still sometimes i can start it and someother times i cant.....is there any fix for that?
i will sell my BA if i cant find one!
lotfytronics said:
I NEED A SOLUTION FOR THE WIFI ,NOTHING WORKED!!it works sometimes,,,the problem is the famous problem of starting it,,,the lamp flashes but the tower doesnt show,,,!
i used every known rom and 2003se and wm5 nothing helped it works sometimes and someother times not,,,,,
it needs soft reset sometimes,,,and some times very resistant
my radio version now is 1.15 and 3.5.2 R5 wm5 and still sometimes i can start it and someother times i cant.....is there any fix for that?
i will sell my BA if i cant find one!
Click to expand...
Click to collapse
I know excatlh the problem you mean as mine has done that for a long time. however, since I flashed Helmi's Wm6 rom mine hasn't done it again. it maybe the fix you need then again it may not depending on your device.
Mine is originally and Orange M2000 and prior to trying Orange's last official rom and t-mobile's latest rom as well it was still doing exactly as you described. make sure your moel is listed in helmi's description of compatable devices. and remember to do pim backup and backup you Storage arear before flashing as it combines internal storage to main memory in the wm6 rom
hope that helps
I just got my BA a few days ago. Did the WM6 upgrade today, and the wlan was doing this.
I noticed that it was happening after I'd sync'd it and the wifi connection was disabled by ActiveSync. I went into the Connection Settings on ActiveSync on my computer (ver. 4.5) and checked the "Allow wireless connection on device when connected to the desktop"
So far, this has worked. I've been able to sync my BA, disconnect, and reconnect to my wireless connection without having to do a reset first.
Nita
wheatfree said:
I noticed that it was happening after I'd sync'd it and the wifi connection was disabled by ActiveSync. I went into the Connection Settings on ActiveSync on my computer (ver. 4.5) and checked the "Allow wireless connection on device when connected to the desktop"
Click to expand...
Click to collapse
This appears to be a bug in the ROM. Activesync on the phone doesn't always realize that the connection is gone and gets 'stuck' in a loop trying to sync to a now-missing computer. Closing activesync on the phone will also clear it and allow the wifi to work after syncing.
i flashed it with wm6 but the wifi probelm still exists,,,only the lamp flashes but no tower is showing,,,,,,,,,,and i tried the wlan manager,,,and the com manager nothing helped
I have exactly the same problem, i think its an hardware error.
the problem started half a year ago with wm2003, yesterday i flashed wm6 but the bug still exists
after multiple switch on-and-off sometimes the wireless works, sometimes it takes just a while 5-10 minutes.
if theres somewhere a solution, please let me know
after a soft reset open CommManager, Setup, Wireless LAN an Select "TURN ON WLAN".
This dont conect.
But, after you do that, you can use te On/Off button of Wifi on te CommMannager with any problem...
You need to do this, only one time after a Soft Reset.
Can this be done via a script, reg key or even a Visual Basic App that opens the Comm Manager and the Wireless Manager and selects these in sequence? I have a profile switching software (PhoneAlarm) and it works a treat all for the activatation of WLAN. Sometimes it works fine, others, it doesn't.
As I am running WM6 and it's lovely undocumented feature (bug) of the time and password both being in volitile memory, each time I take my battery out, I have to rebuild the 'ken device as I cannot unlock the screen. I have resorted to using SPB backup nightly and a reboot after backup (as the device seems to work better with a daily reset (hey, it ain't stable yet - we are still waiting Billy)). This is where the Wireless issue comes into play.
Do I settle for Profile switching with wireless powering on correctly or do I backup my device and ensure that I am not re-imaging the stupid thing every day when I take out the battery! Mobile device - bulldust! Not very mobile when you have to keep it plugged in to ensure the battery doen't run out! My Laptop is more mobile!
jriquelme said:
after a soft reset open CommManager, Setup, Wireless LAN an Select "TURN ON WLAN".
This dont conect.
But, after you do that, you can use te On/Off button of Wifi on te CommMannager with any problem...
You need to do this, only one time after a Soft Reset.
Click to expand...
Click to collapse
no, that doesnt work with my BA
Hello there,
What I Have: Att 8525 Herm100
Rom: Att's Mobile 6
Everything is stock but the extended life battery
The problem I am having is when ever I try to activate my WiFi the phone doesn't do anything. I am not sure if there is a wifi card or not but that's want I want to know. I have tried everything from activating it in com manager to going into the settings and activating it manually and nothing happens it acts like I didn't even hit the button to activate it. Is there a wifi card in the phone or is it integrated on the motherboard in the phone. Note: I bought this phone off e-bay and the wifi never worked when I received the phone.
I am new here and if there is a post about this already I am sorry.
I hate it when that happens.
To begin, there were two ATT OEM WM6 roms relevant to the 8525 that I noticed deep in the bowels of XGA.
I chose the later file (higher revision numbers) I found it here:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
From comm manager when I click the tower button on within a second the spinning windoze icon shows something is happening. It then starts "sniffing" for my preset wifi connection (ATT supplied 2wire portal 802.11g).
Now, if yours does not show the spinning windoze working icon when you turn on wifi? There obviously is a problem. This could be software, or hardware related (duh). If there is no error message related to "wifi is not an option, unavailable, or screwed" then my first guess is there is something missing or damaged in the ROM update that was applied to your device. As far as I know all 8525 (herm100) were shipped with wm5. It had been mentioned in the volumes of xda that the first AT&T WM6 rom was a little buggy. Try the later released AT&T WM6 update.
It was a run file so no muss no fuss. Sync the phone run the update from the pc, three minutes later the phone is flashed to ATT WM6 professional.
You could take it to a ATT shop? But, I think that without a doubt they would hand it back and say you need a new phone with a 20 year contract and 3g data plan even Obama would blush at.
Try the hard reset. take a picture of the startup screens so you have the numbers and see if the wifi startup is working after the reset. If not then compare the numbers to the above mentioned roms. If the indications are you have the first issue of WM6 from ATT try flashing the second release. If that still fails then your device could indeed have a hardware problem.
The wifi is indeed built into the system and if that chip on the board is not working it could be a overly expensive problem. Possibly a shop has a working board they would swap out cheap? Otherwise, it is a fun phone you can keep notes on, run gps software if you have a bluetooth gps receiver and software like tomtom.
To be honest the wifi on my 8525 has been convenient when around the house to check the local weather radar when I hear a thunder outside, or browse headlines from the porcelain room or even leave messenger turned on incase a gamer friend is looking for someone to get shot up in a game.
I have used the live search voice thing to amaze the neighbors once. But, the limited range of wifi is a real drawback to how truly wonderful that addition could be.
HELP Please! Wi-Fi not working!!!
Hi to XDA all users !!!
MY Hermes - HTC TyTN [Herm200]
I bought HTC Hermes myself year ago.
there was flashed a WM5.0, I've just downloaded from here HARD SPL & WM6,1 (Custom) Flashed.
Wi-Fi will works on WM5.0.
Well here I am at 6.1 flashed and now is not working Wi-Fi. When i pressed Power ON - loading long and nothing happens.
Other methods are also tried on Commanager and Settings - but did not help.
What do I need to do my dear.
HELP!
Thank you for your attention!
Hi Nurk.
Since the wifi worked on wm5 but failed after the 6.1 flash. I would guess the problem is in the 6.1 components. You might start with contacting the kitchen rom you employed for WM6.1 thread and see if this has happened to others. Next step would be to check the radio rom version. I did see on xda an assortment of Radio roms.
If your not totally in love with the current rom you have flashed? Try another 6.1 or even a 6.5 and see whats poppin.
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
utak3r said:
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
Click to expand...
Click to collapse
I have get this from registry:
HKLM\Software\HTC\CommManager\WLAN\DeviceName - {98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1