Develop Bugs

VPN and Remote Desktop

Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!

here's remote desktop. How do you use it? I don't know how to set it up.

thanks!!!!
now for VPN....
cheers!

The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse

Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks

fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....

Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot

if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik

for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.

hermes(m3100) wifi problem - help please

i have a orange m3100 version of the hermes.
recently i flashed it with schaps 3.54b rom
now i can't use my wifi router/network @ home nor another wifi router/network @ work.
in fact i'm well connected, i'm sure of this because from another computer of the networks, i can ping the (static) ip of my hermes. i tried changing and changing again my ip and tested it.
but the hermes cant go on internet.
i use the right gateway and DNS in each case but no surf in pocket ie.
any solutions or other tests i can do?
in french if possible since i and my rom are in french.
thank you.

update : i made some tests :
it is nos a dns problem : i put the right gateway and dns on the smartphone but i cant get a website by typing its ip in pocket ie adress bar (other browsers dont work better) and i cant even access my router admin interface.
when i'm trying wifi with static ip or dhcp on my m3100, i can ping its ip from another computer of my networks and the smartphone responds ok, and i can see its mac adress in the connected clients on my router config screen. But the smartphone can't ping anyone.
i asked a friend who told me that the proxy (192.168.10.100 :8080 ) used for the connection to orangeworld in gprs/edge is also used when i try to connect via wifi and that is why it cant connect nowhere because my personal network is configured differently and without a proxy.
if i delete the proxy my connections will cost me more when i use gprs.
if i configure my router like this (192.168.10.xxx) with a proxy on 8080 it could work but only on my network and not @ my workplace or somewhere else where network params will be different.
any ideas or solutions ?

wow ! so many people trying to help :/
well i found a temporary solution to my problem, probably not the best one but the best i can do by myself so if someone wants to help : thank you
it was actually a proxy problem.
i looked in the registry and found a key where the proxy adress was detailed : 192.168.10.100:8080
i have exported this value as "proxon.reg"
then i modified the value by deleting its content and i exported the empty value as "proxoff.reg"
now i have my "proxy switch".
before activating the wifi and starting ie, i lauch "proxoff.reg" which clean the registry for the proxy data and magic : ie connects fine.
and when i want tu surf via my provider orange, i desactivate the wifi and launch "proxon.reg" which restore the correct proxy data to the registry. and i can surf on gprs/edge.
all this is fine when i switch off the phone functions in the comm manager.
but now i need someone to tell me how i can automatize this for the wifi and edge connections because if the wifi signal gets too weak, i dont want my phone to switch to the gsm when the proxy is desactivated.
i hope you can understand my english.
please help.

In the last version of BatteryStatus (http://forum.xda-developers.com/showthread.php?t=270751) you can find,among the others stuffs, the "Disable Proxy for WiFi" option (see the Tools tab)... Maybe more simple than "regg-in" on and off? I'm ok with it, try and see if it's ok for you also...
Bye!

hey kamaal i just downloaded the batterstatus program but im not seeing the "Disable Proxy for WiFi" option in the Tools tab
***edit:
sorry i downloaded the extended version beta and it was there

How to share my pc's internet connection with my MDA Compact III??

Hey Everyone,
I have just upgraded my device to Windows Mobile 6 so I had to install Activesync 4.5 and I would like to access my pc's internet connection (which is adsl) when it is connected via USB. But when I connect my device via USB it doesn't seem to have access to internet at all even though it should be automatic as far as I know. I guess some things should be done in settings but don't know what they exactly are. Would you be so kind as to help me by writing every single step I should take to make it work?
I would also like to access my pc's net via Bluetooth but I think it's going to be more difficult to set. I have a bluetooth adapter with Bluesoleil software and I don't know what I should do to synchronize my device with pc via bluetooth using Activesync 4.5. I guess after making it work, accessing my pc's net via Bluetooth wouldn't be a big problem.
I hope you have ideas what to do.
Thank you for your help in advance!

when in settings->networking->usb to pc->enable advanced network functions is checked
and connetions->advanced->select networks is set to my work network
when ever the pda is connected to activesync using usb or bluetooth
the network which is being used is that of the pc
unless the pc is set to otherwise

Thanks for your short reply. I have done as you wrote, but it still doesn't work.
at settings->connections->connections->My work Network there are 4 things:
-Add a new modem connection
-Edit my VPN servers (I have tried to add a VPN server but didn't know the exact settings)
-Set up my proxy server
-Manage existing connections (I have also added a cellular modem connection and *99# is supposed to be dialled but I didn't do any other settings)
So I guess there are things here that should be changed. For example at VPN, what should be the name of the Server? My computer's name? and there's a part at which it requires a Username and a Password and also a Domain marked with a *. What should I write in these fields? The usernam and password that are set to connecting to the internet on my pc or something else?
I might have to check the settings of my as well, I guess. What settings should be checked on it?
Thanks in advance!!!

I might have to check the settings of my pc as well, I guess.*
Sorry I left out a word.

settings->connections->connections->advanced->select networks
dropdownbox is set to my work network
to spell it more out

It is set that way, but it still doesn't work. This is why I think I should change things either on my pc or in My Work Network settings (the 4 menu points I mentioned). But I did everything the way you wrote in your first reply and despite this fact it still doesn't work. So I'm out of idea

Connection setup wap/internet

Hey,
Where about are connections stored? ei my virgininternet/virginmms 3g profile stored on the phone?
As the connection manager is only listing 1 of about 8 there are on the phone... im trying to delete some made by connection wizard and edit some others
(i know the exist as they are listed in mms settings for "connect via")
Are there other connection managers that do a better job.... or a way to manually create my own connections?
Using EnergyROM_21864_RHODIUM_09.Nov.2009_StandardM2.5

[Q] NAT in Hotspot mode and others...

Hi everybody!
I've lurked around looking for answers but I've found nothing so far. I'm quite new to smartphones as well as to Android, I've just bought a Desire immediately upgraded to Android 2.2 and here are my questions:
1) When I enable the WiFi hotspot mode how can I set a NAT rule on it ? I mean, I want to access my local computer connected to Internet through my desire hotspot from another computer on the WAN side. To do this I should instruct the NAT of my desire to forward all request on a designated port to my local computer.
2) Is it possible to mount a network folder in order to access files on it through any installed applications ? (For instance I'm not able to open a .doc or .xls on a network folder using EStrong Explorer as well as Astro as well as ...)
3) How can I associate a default application for each file extension ? (i.e. .doc: use quickoffice, .avi: use Rockplayer, ...)
Thanks
Sansone

I could be wrong but I would have thought that the Wifi sharing is more of an access point than a configurable router. I would be very surprised if what you ask is at all possible without having a router connect to the internet, using your phone as the gateway. Like I say I have no 1st hand knowledge of this but it is to me what would seem likely.
If you find out different please post back your findings.