Connection setup wap/internet - Touch Pro2, Tilt 2 Windows Mobile General

Hey,
Where about are connections stored? ei my virgininternet/virginmms 3g profile stored on the phone?
As the connection manager is only listing 1 of about 8 there are on the phone... im trying to delete some made by connection wizard and edit some others
(i know the exist as they are listed in mms settings for "connect via")
Are there other connection managers that do a better job.... or a way to manually create my own connections?
Using EnergyROM_21864_RHODIUM_09.Nov.2009_StandardM2.5

Related

Remote Desktop Mobile

I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?
digitalfx said:
I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?
Click to expand...
Click to collapse
make sure the connection is active before attempting to connect... so kick up internet explorer or something that initiates the connection...
I have a connection, I can see it go active then I get an error.
I tried as you suggested, the error just comes up immediatly.
ERROR:
Cannot Connect. Likely reasons are:
1. Specific Computer name does not exist
2. A network error occurred while establishing the connection.
Works fine when using WiFi or when connected to PC via USB...wont connect while on 3G
digitalfx said:
I have a connection, I can see it go active then I get an error.
I tried as you suggested, the error just comes up immediatly.
ERROR:
Cannot Connect. Likely reasons are:
1. Specific Computer name does not exist
2. A network error occurred while establishing the connection.
Works fine when using WiFi or when connected to PC via USB...wont connect while on 3G
Click to expand...
Click to collapse
mmm...i think i know your problem...
Click Start > Settings > Connections > Connections > Advanced > Select Networks... now what connection is specified in the 'Programs that automatically connect to a private network should connect using'
that should be your 'GPRS Connection' you are using to connect to your IP WAN
thanks, I had that set wrong...but still cant connect.
my 3G is setup as ISP (Cingular)...I called it "ISP"
The advanced setting had a preset called "My ISP", so I re-setup my connection and called it "My ISP" and selected it in "Programs that automatically connect to a private network should connect using:"
still wont connect.
digitalfx said:
thanks, I had that set wrong...but still cant connect.
my 3G is setup as ISP (Cingular)...I called it "ISP"
The advanced setting had a preset called "My ISP", so I re-setup my connection and called it "My ISP" and selected it in "Programs that automatically connect to a private network should connect using:"
still wont connect.
Click to expand...
Click to collapse
did you use Custel's cabs to install the Cingular Settings??
no, those always caused problems as I am using ISP not MediaNet.
btw- should have mentioned I am now using Black IV Shadow and Radio 1.43.00
Possible reason: your networkprovider has blocked the port used by remote desktop.
We had to change the gprs connection point/address when we wanted to use vpn to connect to our corporate network.
Try to get hold of at telnet application for your device and connect to port 3389 on you remote desktop server.
nadreas
digitalfx said:
no, those always caused problems as I am using ISP not MediaNet.
btw- should have mentioned I am now using Black IV Shadow and Radio 1.43.00
Click to expand...
Click to collapse
ahh well change your signature
ok... umm let me think... i want you to re-create the connections without using the My ISP... create a seperate one for Cingular...
digitalfx said:
I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?
Click to expand...
Click to collapse
I had the same problem till I created two VPN connections. One for internal use (WiFi) and one for extenal use (3G).
The internal one uses the internal IP address of the VPN server and the external one uses the external IP address.
You have to sleect which connection you want to use before starting the connection depending on whether u r using WiFi or 3G.
Hope that makes sense. It works 4 me.
GOT IT!!! Thanks
esseff said:
I had the same problem till I created two VPN connections. One for internal use (WiFi) and one for extenal use (3G).
The internal one uses the internal IP address of the VPN server and the external one uses the external IP address.
You have to sleect which connection you want to use before starting the connection depending on whether u r using WiFi or 3G.
Hope that makes sense. It works 4 me.
Click to expand...
Click to collapse
esseff, pardon my noobness but when you speak of "VPN server" is that referring to the desktop I am trying to remote connect to?
I have an ATT 8525 w/Black Satin Normal WM6 on the ATT network using MediaNet as my GPRS.
I can remote in from almost any open network via my laptop. Could it be that ATT blocks 3389? If so can I alter the port RDM uses to setup a connection?
are you able to remote connect PC to PC? (from outside of your current LAN)
if not ... its not your phone its your firewall... try disabling your firewall w/in your pc os and router.
would explain why you can connect using wifi if its part of your router and its set up as a "home network".
I'd bet if you googled this you'd find EVERYTHING you need to know.
Yes, I can connect just fine PC to PC outside the LAN. I have my custom listen port opened as required. The issue is definitely with the 8525 connection settings or the ATT service. I have trolled google pretty extensively, but have been unsuccessful in finding some quality info.

way to choose connexion Internet Explorer

Hello,
my question seems to be easy but i'm looking for a way to change my connection when i open Internet Explorer on my HTC WM6, i have some differents connections and i always need to go in the configuration before to change it
Delete..
hey dude, just delete the connections that you do not need.. make sure the only one left is what you want for your internet explorer..
thank you or your reply but i need to have the 3 connections that exist on it. i have differents APN for differents usages, one for shared connection with my laptop with public internet, another to connect to my provider wap portal and a third for shared connection but on my company private network. so i can't remove the existing connections
hello all,
so nobody knows the way to do that ?
thank you

How to share my pc's internet connection with my MDA Compact III??

Hey Everyone,
I have just upgraded my device to Windows Mobile 6 so I had to install Activesync 4.5 and I would like to access my pc's internet connection (which is adsl) when it is connected via USB. But when I connect my device via USB it doesn't seem to have access to internet at all even though it should be automatic as far as I know. I guess some things should be done in settings but don't know what they exactly are. Would you be so kind as to help me by writing every single step I should take to make it work?
I would also like to access my pc's net via Bluetooth but I think it's going to be more difficult to set. I have a bluetooth adapter with Bluesoleil software and I don't know what I should do to synchronize my device with pc via bluetooth using Activesync 4.5. I guess after making it work, accessing my pc's net via Bluetooth wouldn't be a big problem.
I hope you have ideas what to do.
Thank you for your help in advance!
when in settings->networking->usb to pc->enable advanced network functions is checked
and connetions->advanced->select networks is set to my work network
when ever the pda is connected to activesync using usb or bluetooth
the network which is being used is that of the pc
unless the pc is set to otherwise
Thanks for your short reply. I have done as you wrote, but it still doesn't work.
at settings->connections->connections->My work Network there are 4 things:
-Add a new modem connection
-Edit my VPN servers (I have tried to add a VPN server but didn't know the exact settings)
-Set up my proxy server
-Manage existing connections (I have also added a cellular modem connection and *99# is supposed to be dialled but I didn't do any other settings)
So I guess there are things here that should be changed. For example at VPN, what should be the name of the Server? My computer's name? and there's a part at which it requires a Username and a Password and also a Domain marked with a *. What should I write in these fields? The usernam and password that are set to connecting to the internet on my pc or something else?
I might have to check the settings of my as well, I guess. What settings should be checked on it?
Thanks in advance!!!
I might have to check the settings of my pc as well, I guess.*
Sorry I left out a word.
settings->connections->connections->advanced->select networks
dropdownbox is set to my work network
to spell it more out
It is set that way, but it still doesn't work. This is why I think I should change things either on my pc or in My Work Network settings (the 4 menu points I mentioned). But I did everything the way you wrote in your first reply and despite this fact it still doesn't work. So I'm out of idea

Turn off Activesync internet connection from PC

I tried to search for this but could not find the answer. Most folks want to have their PPC go through the internet on their PC when they are connected to activesync. I would like to prevent the PPC from using the activesync connection and use 100% cellular connection.
1) I tried to block the wescomm file in my firewall and that is no good because all new TCP outbound PDA connections will want to use the activesync link. Only applications started before activesync links will go through the cellular.
2) i found a registry entry where i can tell the USB connection to not be used as the default gateway. This works fine the first time you connect. It forced the USB connection to use the default gateway of the cellular link and bingo it works. But the next time you connect to activesync the reg entry gets overwritten.
Any ideas on how this can be done?
Thanks,
JD
tried choosing My Isp in network for programs which automaticly connect to internet
in connections>connections>advanced>select network ?
How does choosing "My ISP" differ from choosing "My Work Network" or "Sprint"? It seems like choosing Sprint would be the best bet since it should always use sprint. I'm hesitant to put it to "My ISP" since that profile is listed as "Phone as modem" which would charge me.
JD

How do I force ie to use wifi

Ok, after a lot of had work I now appear to have access to one of my routers (Netgear WNR834B)...
But I can't get Internet explorer to access the internet via the wifi connection... My XDA keeps trying to access the GPRS connection.
I've ready several other threads but nothing seems to fit my problem. Any ideas? From what I can read I have to set up a connection to the wifi but I can't find wifi listed in the connections window...
Can someone give me a few pointers...
Thanks in advance
Well i had the same problem with my settings....
When i have configured my mms settings mannually... the IE wants to connect to gprs always but
I go to settings... conection advanced tab and change the firs to my worknetwork cause says thta all the pribate programs wants to conect with my GPRS settings... just let it no choose to take mms settings... it seems to be the answer to me and everything works again for me... oups i miss something you need to use once your gprs then make this change please.
Hmmm
I think I see where your going... but I can't see how this would help... But I'll try hand on...
No that didn't work for me... I tried to change the connection to use the MMS but all it tries to do is use the GPRS again. I can't seem to change it even after it connects via MMS.
Found out another bit of the puzzle tonight. I have to set an IP inside the BA or else I get no conections to the internet via the active sync cradle. (set to 192.168.1.22 subnet 255.255.255.0 gateway 192.168.1.1)
But even thought the wireless LAN manager says I'm connected (and I get the correct MAC address for the router) if unplug the BA from the cradle the router reports I'm not connected... Its almost as thought theres a stealth firewall running on the PDA...
Any idea?
Mmm lets work on it...
i will upload a video of this issue to show you how it works... i dont have any idea of make it works by entering a diferent ip.
Try this http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/

Categories

Resources