Anyone know how set accounstic parameters works?
I am trying to adjust the fact that full volume on the Phone via the speaker is fine, but then when I listen to music via the wired headphones, I have to turn it dwn to say 35%, then I get a call and volume jumps right up to max and it sound slike the other person is shouting right in my ear.
(Ok that is probably the effect the wife is trying to achieve, but even so....)
I was wondering if this can be achieved by tweaking the set accoustic parameters files.
The first hurdle seems to be that a different file is used per operator - how do I know what my operator ID is?
If anyone can help or make any other suggestions I would be most grateful.
crazyC said:
Anyone know how set accounstic parameters works?
I am trying to adjust the fact that full volume on the Phone via the speaker is fine, but then when I listen to music via the wired headphones, I have to turn it dwn to say 35%, then I get a call and volume jumps right up to max and it sound slike the other person is shouting right in my ear.
(Ok that is probably the effect the wife is trying to achieve, but even so....)
I was wondering if this can be achieved by tweaking the set accoustic parameters files.
The first hurdle seems to be that a different file is used per operator - how do I know what my operator ID is?
If anyone can help or make any other suggestions I would be most grateful.
Click to expand...
Click to collapse
same question for me!
Anyone? (Please)
see this http://forum.xda-developers.com/showthread.php?t=348329
doesn't really help and relates to bt headphones?
Bump? Anyone?
OK really no one knows anything? Just give me a few hints about how this all worls and I will tr and find time to play around with it and work out the rest.
IIRC set accoustic parameters runs on the first setup ? Does it run each soft reset ?
Any info would give me a useful starting point.
Cheers
Low Phone Volume
Do a search on "Low Phone Volume" and you will find a thread by that name in this forum with a great deal of information on this topic.
Related
Hi Fellas,wonder if you could help me out.
Done a search,but to no avail on this one.
My XDA Orbit loudspeaker has gone distorted on speech lately.Music is fine but speech such as MS Voice command and TomTom sound distorted at high volumes.Seems like the volume is louder than before,like the gain has been turned up or summat.
Anyone know where loudspeaker volume level in the registry is?
Maybe turn that down a couple of clicks may help.Anything so I ain`t gotta change the speaker!
Thanks in advance.
Anyone know where loudspeaker settings are in the registry?
Anyone? ???
Maybe this will help. Not investigated it myself, but maybe worth a read..
http://forum.xda-developers.com/showthread.php?t=256734
That`s very helpful.
Cheers buddy!
How did you get on? I have the same problem, which settings did you use if you got a good result.
Still playing with it at the minute.Definately alters things using the values from the Wizard registry.
I`ll post my final settings when I crack it.
Hi everyone,
i just have receive this toy and i noticed that the volume is too low. I know the speaker is very weak and it will not support a high volume level but im interested in modify something (may be registry) and pump the volume up so i can use headphones and listen some music with a decent volume level.
I already have installed resco registry and i explored registry but im not sure about make some changes if i do not know what am i doing.
Please help me...Volume is too low...
Regards from Mexico.
Hey Juanvera-
I've got myself the same iPaq you've got, and have noticed the same thing... however it'd help if you specified whether you said that this happens with the headphones as well. I know the speaker is quiet, and I've tried several little tools to help but nothing works due to the screen size. My headphones work great with it, with a perfect volume range, but the onboard speaker is quite the opposite. If this sounds right for your problem, then you're outa luck.
If anyone has this problem and has found a solution, let me know too
Chris Ellian, Noxem Computers
In HD Tweak, I set Volume Control\Acoustic settings to anything above the 100db limited (Default) - and audio gets boosted accordingly, but the microphone doesn't work and I'm unable to talk to anyone.. anybody have the same issue or any workaround?
I just want to boost the audio levels of the device overall. Btw, I also tried the audio booster within HDtweak and it doesn't seem to do anything. I also tried the audio boost cabs in the HDtweak site and no change.
I applied this tweak also and same thing. It even screwed up my bluetooth headset and i couldn't hear anything. When switching to speaker you only heard slight static. Only time i could hear the caller was the internal speaker but caller couldn't hear me. Had to go back to default for it function normally again. Not sure of any work around yet.
Hmm...I changed mine to "Normal" and had no problems with mic.
Guess I'll have to test further.
Did you happen to apply any other changes prior to HDtweak (such as: SRS WOW, or applying the AudioPara3.csv file floating around)? These may be conflicting with the change.
Nope, I didn't have anything else running or installed. Tried it on both mine and my fiance's TP2, with the same results.
Right now I'm using that tweaked AudioPara3.csv, but I can't really tell a difference if there's a difference, maybe a slight volume increase.
koopiskeva said:
In HD Tweak, I set Volume Control\Acoustic settings to anything above the 100db limited (Default) - and audio gets boosted accordingly, but the microphone doesn't work and I'm unable to talk to anyone.. anybody have the same issue or any workaround?
I just want to boost the audio levels of the device overall. Btw, I also tried the audio booster within HDtweak and it doesn't seem to do anything. I also tried the audio boost cabs in the HDtweak site and no change.
Click to expand...
Click to collapse
koopiskeva said:
Nope, I didn't have anything else running or installed. Tried it on both mine and my fiance's TP2, with the same results.
Right now I'm using that tweaked AudioPara3.csv, but I can't really tell a difference if there's a difference, maybe a slight volume increase.
Click to expand...
Click to collapse
Not 100% sure of what you've done, but suggest you revert everything back to stock (HDtweak all audio related changes to default settings, remove 'audio boost cabs' and the AudioPara3.csv file), and soft-reset.
Test that mic is working properly, then try HDtweak -> only the acoustic settings to "Normal".
Soft-reset and check for mic functionality.
Sorry about that.
I meant previously that I had reset all settings back to stock, and was just running the AudioPara3.csv tweak (which didn't seem to do much or anything at all).
I reverted back to stock again now, and am just running HD Tweak\Acoustic Settings\Normal. I tested the mic with a call and it does indeed work.
I can't really tell if the volume is louder though, I think it is, but it's just hard to compare. I had set it to Maximal before and could definitely tell a huge difference, so I guess that's what I'm aiming for, or at least intermediate, but for now the Normal setting will have to do. Thanks sir.
I have installed & run HDtweak on my TP2. I hear no noticeable audio level increase. I have set all volume tweaks to max. Is a reset needed to "apply" the tweaks?
I have downloaded and tried the audiopara3 full & light boost and it made my device to where I couldn't hear the other caller at all. But it did make the ringtone louder.
I un-installed and know its back to normal.
I am having the same problem with HD tweak.
The mic goes off each time i increase the volume in HD tweak.
Still waiting for a solution and searching daily for a descent tweak, (Pro2 tweak maybe)?
Sorry to bump this old thread, but I was wondering if this HDTweak problem was ever solved?
The only way I can get my unbranded TP2's music players (WMP, Audiomanager, Coreplayer and Pocket Player) working at a comparable volume to my iPod Touch is by using HDTweak's volume tweaks, but I can't hear anything when making calls through my handset or speakerphone.
I've already tried multiple extusb adaptors and various headphones, and the sound is still considerably more muffled and not as loud as my iPod Touch.
I'd appreciate any help on this. Thanks!
Hello！It's me！
Here r some questions for my T-mo G2 followed:
1 I feel my device's voice is so low that I always miss some in-callings. And I have try to adjust the volume by the system. But it doesn't give me the satisfactory effection. So, is there any good app for the voice volume for the in-calling?
2 Just like know to all,when the phone is dialing, the radiation is the most dangerous. So,how can the device vibrate when the calling is hanged?
HOW CAN I DO?
THANKS A LOT!
fengyan said:
Hello！It's me！
Here r some questions for my T-mo G2 followed:
1 I feel my device's voice is so low that I always miss some in-callings. And I have try to adjust the volume by the system. But it doesn't give me the satisfactory effection. So, is there any good app for the voice volume for the in-calling?
2 Just like know to all,when the phone is dialing, the radiation is the most dangerous. So,how can the device vibrate when the calling is hanged?
HOW CAN I DO?
THANKS A LOT!
Click to expand...
Click to collapse
sorry, your english isn't great but what i think i see is:
you want the volume louder when you are actually talking to someone on the phone
you want the phone to vibrate when the call is done? (not so sure on what exactly this one was supposed to mean.
the first one i don't have much of an answer for other than you may not be holding the phone properly, this phone took me a few days to figure out how to hold it and hear the person on the phone. try moving the phone a bit when you are on it and see if that helps at all.
and the second question might be solved by root and flashing CM6.1, there is an option in the settings to make the phone vibrate when the call is connected, hung up, at the 45 second mark of each minute, and loads of other options.
Yes,my English is very poor！ I'm sorry for that！
Thank you for your reply,especially the 2nd answer！
But my first question means when the device has a incoming calls, its ringtones are so low that I always miss calls. So, how can I do?
Thank U again！
CM6.1 also has an app called DSP manager that you can use to adjust the equalizer settings, bu i don't really think that will increase the overall volume of the phone. you can try it out but i honestly don't think there is a fix for low volume at this point
I was wondering if there were a way that when I plug my headphones in that it wont automatically change the volume down.
Also is there a way that when my phone starts ringing that it wont start low and then get louder? Like the first ring will be lower than what follows. I just want it all the same. THANKS!
anybody? i hate that it does these things!
Tasker can do all of that, but takes some work.
I know in settings under sound or calls you can adjust the progressive ring feature. As far as head phones go it is a built-in safety precaution.