Cyberon Voice Commander-I Lack Bluetooth mic input - Upgrading, Modifying and Unlocking

I've loaded Cyberon VC 2.0 build 705142 on my Vogue (CDMA Touch). With my Motorola HS850 connected, I can start VC with a touch of the button on the headset, and I hear her thru the BT ear piece but the program cannot hear my response through the HS850's mic. I've searched high and low for a registry tweak to enable the mic but found none.
Presently, I have to start VC with the camera button then speak into the phone, then when it processes the command, open (turn on) the headset to use BT for the call.
Anyone know if this can be remedied.
Thanks

Related

Phone audio as speakerphone?

Can the XDA2s phone be configured to produce loud audio so it can be used as a handsfree speakerphone? The audio from Fonix Voice Dialler is loud but as soon as a call connects it drops to telephone levels.
crocodile said:
Can the XDA2s phone be configured to produce loud audio so it can be used as a handsfree speakerphone? The audio from Fonix Voice Dialler is loud but as soon as a call connects it drops to telephone levels.
Click to expand...
Click to collapse
Yes, during the call, press and hold the green phone key for 2 secs.
I tend to dial the no, soon as it rings, press & hold green key for 2-3 secs till i can hear the ringing. Not bad too.
Thanks.
...
R O F L, so I have had my MDA3 for almost a year now and ALL THIS TIME I was thinking why in the world would MDA3 not have a speakerphone since my last H6315 (hp) had a neat little icon for speakerphone right by the "talk" button.
Thanks for posting this!!!!
This can also be achieved programatically
Here is an article:
http://www.teksoftco.com/forum/viewtopic.php?t=80
as far as I know all MS smartphones and pdaphones have all had this same functionality since the release of WM 2002
Actually the speakerphone is very device dependent. So we should be more concerned on the features HTC has to offer then Microsoft.
Still speakerphone is a must, so i doubt that it wouldnt be included on a phone-capable device.

xda IIi with Jabra BT 250v Bluetooth Headset

I have the O2 xdaIIi and was advised to purchase the Jabra BT250v headset to use with my pda/phone and the fonix voice dial function. The headset connects easily and will let me receive calls by pressing button on headset. I can make calls using the phone pad on the pda.
I can not initiate the fonix voice dialling software by pressing the button on the headset as described. I have to press the button on the headset first to establish connection between the two and then press the voice dialling button on pda, clearly this is not right........anyone help?
I am not sure if it will work as the Imate phones don't have profiles for voice recognition. I maybe wrong though...

a2dp problem and phone not ringing when call come

hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
hi i dont understand..ms voice command can do wt?
porkchop83 said:
hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
Click to expand...
Click to collapse
Under Windows Mobile 5 it worked but not under 6. Under WM5, all phone rings would come thru the external speaker (I liked this) and music thru the A2DP headset. Now under WM6, I get rings and music thru the headset. No phone ring externally. I hate this as I miss calls all the time because the earbuds are not always in my ears. I plan to search for some reg settings tonight (on my own). Anyone had any luck with changing this behavior?
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
species8472_rules said:
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
Click to expand...
Click to collapse
Suppose I should have provided an update.. It only works on the first phone call after powering on the headset. Once I accept a call via the headset, it nevers rings externally again..

Voice Speed Dial button on headset

I have TyTN with Windows Mobile 6.1 - thistime without integrated voice dial with headset (supporting A2DP and AVRCP) Therefore I have installed 3rd party app for voice dial. (VITO VoiceDialer)
But unfortunatly the button on headset for speed dial is not working. (other buttons like music forward/backward, redial last number are working)
Is there any way to hook the headset-button or emulate it as HW button on device. Such as Button 1, Button 2 etc.? Or assign default voice dial application?
Thank you for any tip
still not solved
I have found tutorial for eten, but not working on my tytn, rly weird
http://www.etenblog.com/2008/02/21/add-bluetooth-headset-button/

Moto H700 bluetooth cannot use voice speed dial

Hi there,
It´s my first post on this forum. I have a P3300 and thanks to this forum i got so many stuff for it.
Yesterday I bought a Motorola H700 BT Headset. I´ve paired the the headset and made some calls, but i dunno how to setup the headset buttons. When i tap the headset call button it calls the dialer and if i hold it dials the last number.
Can i remap the buttons to call the cyberon voice speed dial?
Thanks

Categories

Resources