Hello,
I have problem - When I turn on my BA and field for PIN entering appears I enter my PIN code and click OK and then it does not go further it just still stuck on PIN entering screen. When I put another Sim Card on my phone wich dont have PIN protection its just No Service I have no idea what is going on, please help me.
Edit: some info: I didint checked it on WM2003 because when I bought phone I instantly installed WM6 because I'm buying and resseling phones and this never happened before. I also upgraded radio to 1.15 but still no changes.
The same occurred to me today, my phone freezed while I was typing an e-mail, so I pushed the reset button. After booting (TNT wm6) and pressing the unlock code, my phone freezed.
Sometimes it allows me to enter my pin (4 digits), sometimes I can only enter one or just nothing.
When I tried with another SIM it worked.. I'm at home now and I tried to boot without a SIM, but it still freezes after the unlock code.
I'm thinking of flashing my phone back to the original firmware to check if that solves the problem. The only problem is that I’ll lose all my messages. I don't care much about the Calendar and contacts, since I sync with exchange..
Anyone has a solution other than flashing a new OS?
Phone model: i-mate K-Jam
jupieee i fixed it i just had to downgrade to wm2003 and then enter unlock code. dont know why it didint worked on wm6 and wm5
probably a flash gone bad. or another GSM/3G Band conflict...
Read my thread about no phone/ no service here... some pointers may help
I know how to do
Just use the stick press the reset hole when the screen is made of four color after you have changed the battery.
Related
Hi,
I have received now my v1640. The first that i do was a hard reset, and now the v1640 ask for a password with 4 numbers and i dont know which is . Can somebody help me? If i put several times an incorrect password, can i lock the device?
I bought the v1640 by internet and its locked for vodafone uk. My provider is vodafone spain, and i know that the device is provider locked. My problem now is that before of doing the hard reset, i can use the v1640 like a PDA without SIM, but now its impossible to get into the SO because the Phone ask me for a password.
Thanks.
I'd suggest, if you cannot pass the security code, to upgrade for the latest imate rom. You'll end up doing this anyway...
I guess by pressing LIGHT + ON/OFF + RESET your device goes to SERIAL 1.0. Then you can install latest image ROM.
But anyway do a search before doing something..
The only sotware lock on a v1640 without the new rom is the sim lock on the phone.
The fact you can only use it as a pda confirms this.
It must be a password you put on your own sim.
The settings are on the bottom of the phone screen under options.
You have 3 attemps or it will lock.
If you call vodafone they will give you a number to unlock it.
Set a new password and WRITE IT DOWN.
Then set the option to either on or off, as everytime you turn on the phone (change battery etc or flight mode) it will either ask for this number or not.
steve
The only sotware lock on a v1640 without the new rom is the sim lock on the phone.
The fact you can only use it as a pda confirms this.
It must be a password you put on your own sim.
The settings are on the bottom of the phone screen under options.
You have 3 attemps or it will lock.
If you call vodafone they will give you a number to unlock it.
Set a new password and WRITE IT DOWN.
Then set the option to either on or off, as everytime you turn on the phone (change battery etc or flight mode) it will either ask for this number or not.
steve
Hi all,
One of the users in our company has locked himself out of his i780 by forgetting the 4-digit PIN he set on the device (not the SIM PIN).
The problem I have is that it is running one of the older ROM's that did not have the hard reset button combination on it so I cannot reset it at all. It also won't enter bootloader mode using the usual combination (although this may be because of the countdown timer on the device not accepting input).
Anyone got any ideas on what I can do next?
Thanks.
dcuk7 said:
Hi all,
One of the users in our company has locked himself out of his i780 by forgetting the 4-digit PIN he set on the device (not the SIM PIN).
The problem I have is that it is running one of the older ROM's that did not have the hard reset button combination on it so I cannot reset it at all. It also won't enter bootloader mode using the usual combination (although this may be because of the countdown timer on the device not accepting input).
Anyone got any ideas on what I can do next?
Thanks.
Click to expand...
Click to collapse
I wonder if you can short certain pins on the flash chip to destroy the checksum and thus cause the device to reset itself - this method was used in the LinkSys WRT54G router and some MP3 players..
did you try reflashing the phone with new firmware? might help since the pin is set on operating system level (afaik), the firmware upgrade is done on bootloader level.
bazzix said:
did you try reflashing the phone with new firmware? might help since the pin is set on operating system level (afaik), the firmware upgrade is done on bootloader level.
Click to expand...
Click to collapse
But he can't get into the loader mode, so Mirage is a no-go.. I suppose the phone doesent even connect to ActiveSync, hm? If it would then the official HL1/2 updaters are able to reset the phone into the loader mode and flash it
Correct, I cannot get it into bootloader mode because the usual key combo does not work and activesync refuses to recognise the phone until the PIN is entered so I cannot use Mirage or the official updaters!
Looks like I'll have to send it off to Samsung!
Cheers guys.
try contacting them first by phone and see if they can't help out. otherwise you'll have to wait for a looong time
Yeah, I've sent phones to them before, they do take a while.
They say they need them back to take the lock off so looks like it'll take a while!
Moral of this story: Don't forget that damn PIN!
dcuk7 said:
Yeah, I've sent phones to them before, they do take a while.
They say they need them back to take the lock off so looks like it'll take a while!
Moral of this story: Don't forget that damn PIN!
Click to expand...
Click to collapse
Doesn't it wipe itself after the 50th attempt?
How old is that version? before Nov2007? Can you post the version number? something like "i780XXHA4"
dcuk7 said:
Hi all,
One of the users in our company has locked himself out of his i780 by forgetting the 4-digit PIN he set on the device (not the SIM PIN).
The problem I have is that it is running one of the older ROM's that did not have the hard reset button combination on it so I cannot reset it at all. It also won't enter bootloader mode using the usual combination (although this may be because of the countdown timer on the device not accepting input).
Anyone got any ideas on what I can do next?
Thanks.
Click to expand...
Click to collapse
By Omnia this ok
1. type *7465625*638*# to set
2. type your MCC/MNC code (list here: http://en.wikipedia.org/wiki/Mobile_Network_Code), e.g.26003 for Polish ORANGE
3. type your new NCK (12345678), then OK
3. type *#7465625 to check your lock
4. type #7465625*638*# and type your NCK (12345678)
5. enjoy.
Hi, i have a problem with my phone i could not find any solution online.
Two days ago the phone was in my pocket in sleep mode. I took it out and it was closed, no button was responding, i took the battery out, put it back again and started it. It asked for the pin code, i entered then it said "unlocking sim card" then the phone restarted.
From that moment it constantly restarts, regardless of me entering pin code or not, it restarts. I use stock firmware and i didn't do any overclocking or any modifications to the phone.
I tried the boot screen (the one which is entered by pushing yolume down+power button) I did factory reset from that screen, it didn't help. I put the phone in recovery mode and a screen appears and nothing happens, i think it is like a dfu mode in iphone, i don't know how to use it. In the boot screen a green text screen appears for a second says "PC101img.zip is missing" or something like that.
Do i have to load the rom again to this phone? If so how can i do that?
Any help will be appreciated.
Hey,
i've never heard of this issue on any phone.
So you coulds just try to do a few things.
First you could try to flash a new radio ROM.
just see the android developement section and the radio thread.
the radio doesnt change the actual rom on your device so yiou wouldnt loos your data.
it might help it might not, as we dont know what the reason for the issue ist.
when does it reboot? when you enter the sim code?
try a different sim card, just to see if it still happens and/or try to remove the sim passcode.
this might help and might help to see where the issue is...
nick
Thanks for the answer. I didn't try different sim card but i tried to start the phone without the sim card and the sd card. It didn't change anything, it still restarts after few seconds.
the-nj said:
Hey,
i've never heard of this issue on any phone.
So you coulds just try to do a few things.
First you could try to flash a new radio ROM.
just see the android developement section and the radio thread.
the radio doesnt change the actual rom on your device so yiou wouldnt loos your data.
it might help it might not, as we dont know what the reason for the issue ist.
when does it reboot? when you enter the sim code?
try a different sim card, just to see if it still happens and/or try to remove the sim passcode.
this might help and might help to see where the issue is...
nick
Click to expand...
Click to collapse
I don't see how a new radio would affect the phones sim card...
Sent from my T-Mobile G2 using XDA Premium App
The problem seems to be with the sim card. I changed the sim card of the phone and it didn't restart from that moment. I used vodafone sim card with the phone for a week and after a week sim card started restarting the phone.
Is there a known cause of vodafone sim cards doing this?
Re: Constantly reboot...
the same issue does happen on mine! Stock firmware, never rooted, however, I've tried using different SIM cards and removed SD card, the same situation still exists. Reboot and reboot... please help!
Spastic909 said:
I don't see how a new radio would affect the phones sim card...
Click to expand...
Click to collapse
Yeah, and randomly suggesting to flash new radios for a problem this person never heard of before is not great advice. Bricking the phone is possible when radio flashing, and should be approached with caution, and only done when there is a radio-specific issue.
Hello,
I have got a big problem with my Asus a10. Somehow, yesterday, when i took it out of my pocket the screen said enter code. I tried entering my pin code and my puk code, both didnt work, the only thing that happened was that it locked my phone. Now everytime i boot up the phone it starts with the enter code screen and it says 1 attempt left. Everytime i try to enter a code it just blockes, takes me to the homescreen and says network locked. The only thing i can do from there is turn off the phone or make emergency calls.
When i reboot, it still says 1 attempt left.
I tried hard resetting the phone by holding both volume keys and the power key, didnt work either.
The strange thing is, it happens also when the sim card is out.
I also tried to update the firmware but you have to enable the usb file transfer mode and i cant enable that because its locked!
Does anyone have any idea or do i have to send the phone to garmin?? The problem with that is that i rooted it and that voids the warranty, and i cant unroot it because i need to enable usb file transfer!
thanks in advance..
Peter
So no one has had this problem before?
Sorry for the shameless bump hehe
Sent from my HTC HD2 using XDA App
Hi .
read a few threads about this problem, but they seem old - is there any way to unlock the tp2 ?
i have used the same pin for over a year and suddenly it said "incorrect password" when trying to unlock.
now it doesnt even give a "response" when tapping the unlock button.
i can tap in an emergency number and call that but nothing more.
when i try to connect to pc i get error that device is unlocked and pls unlock to sync.
any tips ?
Assuming that you are referring to the WM OS pin code, no. There is no way short of a hard reset to clear that out.
Sorry. Hope you have a somewhat recent backup. Otherwise you are SOL.