Develop Bugs

ROM ITA Cooking in progress

Finally HTC has released the new firmware for P3300 (aka Artemis) in varous languages (I'm italian, so I'm interesting on italian version).
It's not the last OS vesion, but I think it's better cook a firm certified for this PDA than adapt a firm build for other HW.
By now I've removed Extended_ROM, Windows Live, Games (never used) and AutoUpdate, so ROM is stable and very light (53 MB free Storage and 25 MB free Programs).
I have some problem that needs your help:
1) How can I remove software protection (the advice installing a not certified program)???
2) Why "Home Plug" doesn't work??? (Perhaps a protection problem???)
3) There is a patch for MediaPlayer (it doesn't work in stand-by)???
With this community I have learned a lot, I'm sure you know how to solve all!!!

From Meschle Vannilla 2.0
3) Windows media player 10.3.18521 - plays in standby mode. *
PS. I'm italian too... so Good Cooking

[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000101a"=dword:1
Is this the key to solve 1) ???
PS: thanks, I'll try with this wmp.

before cooking check the htchome.dll file:
is it signed and has it oem sign 2005?
cesconoa said:
Finally HTC has released the new firmware for P3300 (aka Artemis) in varous languages (I'm italian, so I'm interesting on italian version).
It's not the last OS vesion, but I think it's better cook a firm certified for this PDA than adapt a firm build for other HW.
By now I've removed Extended_ROM, Windows Live, Games (never used) and AutoUpdate, so ROM is stable and very light (53 MB free Storage and 25 MB free Programs).
I have some problem that needs your help:
1) How can I remove software protection (the advice installing a not certified program)???
2) Why "Home Plug" doesn't work??? (Perhaps a protection problem???)
3) There is a patch for MediaPlayer (it doesn't work in stand-by)???
With this community I have learned a lot, I'm sure you know how to solve all!!!
Click to expand...
Click to collapse

NikMel said:
before cooking check the htchome.dll file:
is it signed and has it oem sign 2005?
Click to expand...
Click to collapse
Not signed, and than...

... than?
You should look around and see if you can find a signed version of that file then include it in to your rom.
You can use "Security Configuration Manager" of microsoft to sign a file but then you MUST include that sertificate in to your rom then it will go.
cesconoa said:
Not signed, and than...
Click to expand...
Click to collapse

cesconoa said:
Finally HTC has released the new firmware for P3300 (aka Artemis) in varous languages (I'm italian, so I'm interesting on italian version).
It's not the last OS vesion, but I think it's better cook a firm certified for this PDA than adapt a firm build for other HW.
By now I've removed Extended_ROM, Windows Live, Games (never used) and AutoUpdate, so ROM is stable and very light (53 MB free Storage and 25 MB free Programs).
I have some problem that needs your help:
1) How can I remove software protection (the advice installing a not certified program)???
2) Why "Home Plug" doesn't work??? (Perhaps a protection problem???)
3) There is a patch for MediaPlayer (it doesn't work in stand-by)???
With this community I have learned a lot, I'm sure you know how to solve all!!!
Click to expand...
Click to collapse
3. This should do it
[HKEY_LOCAL_MACHINE\Software\Microsoft\MediaPlayer\Preferences]
"UnattendedPlayback"=dword:1
"FastCacheReserve"=dword:00800000
"LocalCacheReserve"=dword:00800000
2. try attached htchome.dll
1, your correct with reg key

I knew you are the best!!!!!
Solved 1) via registry key
Solved 2) thanks NikMel and Meschle
Solved 3) thanks Meschle
Now I'm perfecting some installation file, the rom is nearly ready!
PS: do you know how to remove user's suggestions and error reports?

Hello
See attachment, to put in OEM folder to remove security
good luck !

This is the result:
http://www.megaupload.com/?d=8VJVYH00
Something needs to be better defined but it is a good base

Hello did anybody try this Rom? How was it compared to the spagetti cr1 rom? anyway thank you cesconoa!!

caine2it said:
Hello did anybody try this Rom? How was it compared to the spagetti cr1 rom? anyway thank you cesconoa!!
Click to expand...
Click to collapse
The real difference is that Spaghetti is based on "Trinity Lasagna" ROM adapted for using with Artemis, my ROM is only a modded version of original HTC Artemis ROM...
I know the hardware is almost identical, but "almost" is not a warranty...
My rom doesn't want to be the best rom for Artemis, but a good base to create your own ROM...
BYE

Is there the touchflo in this rom ?

cesconoa said:
The real difference is that Spaghetti is based on "Trinity Lasagna" ROM adapted for using with Artemis, my ROM is only a modded version of original HTC Artemis ROM...
I know the hardware is almost identical, but "almost" is not a warranty...
My rom doesn't want to be the best rom for Artemis, but a good base to create your own ROM...
BYE
Click to expand...
Click to collapse
And it's a very good base...well done cesconoa

giggetto said:
Is there the touchflo in this rom ?
Click to expand...
Click to collapse
No, but you can add it

and how i can add it?

ferelo said:
and how i can add it?
Click to expand...
Click to collapse
◄ HyperCore Kitchen ► MULTIDEVICE !!!

cesconoa said:
No, but you can add it
Click to expand...
Click to collapse
I'm not so skilled. If i do that i'll risk to brick the phone.
Could you do it for us ?
Thank you.

giggetto said:
I'm not so skilled. If i do that i'll risk to brick the phone.
Could you do it for us ?
Thank you.
Click to expand...
Click to collapse
I've bricked my phone three times, to recover it you need install original HTC FULL rom that writes bootloader, filesystem, and all the rest (complete resume)
Like you can see by my posts number, I'm not so experienced as Meschle or tom_codon, I'm a user that wants share his experience to realize a good ROM for Artemis in italian...
If you try to build your rom, it's possible you are more able in something and me in some other, adding your experience to mine is the way to obtain a result!!!
BYE

@cesconoa:
only few question:
is this rom bug esent? is it all functionally?
I need a very very light rom and i thing it's a good idea install original WM6 but "lite".
Can you tell me precisely the changes you made in this rom from original?
And what are the value of Storage (and free) and Program (and free)?
Thanks

FIX for lost settings (passwords, BT pairing,etc.)?

I've installed MARY 3.7.1 and some other cabs. After a soft reset it was normal that BT pairing, passwords and the GPRS settings were gone or didn't work.
By accident I tried an old CAB from mun_rus calls BT_DUN.cab, I don't install this one normally when I reflashed my device.
I thought the solution was in MARY 3.7.1, but after uninstalling BT_DUN.cab I've found out that the settings were lost again.
The CAB is here: http://forum.xda-developers.com/attachment.php?attachmentid=39883&d=1180164571
Can someone check this with a ROM with the new XIP like MARY, PDAVIET, schaps, etc.?

Stingray66 said:
By accident I tried an old CAB from mun_rus calls BT_DUN.cab, I don't install this one normally when I reflashed my device.
Click to expand...
Click to collapse
Hmm, at first glance you actually seem to be right which is good news for many among us
I had never installed that CAB before, and I learned to live with lost passwords etc. (never got around to trying the workaround), but that's all about to change with this easy fix​Some more tests have revealed that in my case the "first glance" must have been sheer luck
I mainly checked whether wifi passwords were required again, and tried uninstalling/re-installing/rebooting/resetting/... but all I can conclude is that only sometimes the settings are preserved and still most of the times the settings are lost - this regardless of the aforementioned CAB.
Well, I haven’t lost hope yet, though. Maybe someone will figure it out, but the sooner the better

MANY THANKS,
It's seems works fine...
Many thanks again...

Stingray66 said:
I've installed MARY 3.7.1 and some other cabs. After a soft reset it was normal that BT pairing, passwords and the GPRS settings were gone or didn't work.
By accident I tried an old CAB from mun_rus calls BT_DUN.cab, I don't install this one normally when I reflashed my device.
I thought the solution was in MARY 3.7.1, but after uninstalling BT_DUN.cab I've found out that the settings were lost again.
The CAB is here: http://forum.xda-developers.com/attachment.php?attachmentid=39883&d=1180164571
Can someone check this with a ROM with the new XIP like MARY, PDAVIET, schaps, etc.?
Click to expand...
Click to collapse
This would be VERY cool if it works! I hope that's all there is to it.
Thanks again Stingray66! PS: Do you drive a Corvette?

StefanoRuleZZ said:
MANY THANKS,
It's seems works fine...
Many thanks again...
Click to expand...
Click to collapse
Work here again too on the ROM FInixNOver 3.1

SuperSport said:
Thanks again Stingray66! PS: Do you drive a Corvette?
Click to expand...
Click to collapse
I did a couple of times, but I'm not in the position right now to buy one. Priority is my wife, kids and moving to another house right now, but a Corvette from 1966 is a great car ..... beautiful!

I already fixed this problem in my latest ROM (version 1.2).
I created a modified XIP and changed some buetooth drivers to verify A2DP still works.
I will create a personal ROM to verify if this solutions works too!
Would be great if this is another solution to fix the problem.

Ok, I found something!
I opened the rom the ausdim WM6.1 and Mary rom 3.7 and took the files of the *. hv ausdim and copy for the 3.7 rom Mary!
The two rom´s are the same version and don't have any trouble copy, and I noticed that once the 3.7 rom Mary no longer loses the passwords or the codes of wifi!
I think the problem is in the register!
HKEY_CLASSES_ROOT
HKEY_CURRENT_USER
HKEY_LOCAL_MACHINE
But where???
Translated by Google, sorry!

sergitec said:
Ok, I found something!
I opened the rom the ausdim WM6.1 and Mary rom 3.7 and took the files of the *. hv ausdim and copy for the 3.7 rom Mary!
The two rom´s are the same version and don't have any trouble copy, and I noticed that once the 3.7 rom Mary no longer loses the passwords or the codes of wifi!
I think the problem is in the register!
HKEY_CLASSES_ROOT
HKEY_CURRENT_USER
HKEY_LOCAL_MACHINE
But where???
Translated by Google, sorry!
Click to expand...
Click to collapse
The problem is in the XIP section, it is in the nk.exe (kernel).
Ausdim uses an older XIP version which does not lose settings.
The only problem was the broken A2DP. I managed to fix this problem and Ausdim will include my solution to fix A2DP in his ROMs.
Upcoming ROMs from me and Ausdim will no longer lose settings.
I hope other ROM-cookers decide to use the older kernel too.

adewidt said:
The problem is in the XIP section, it is in the nk.exe (kernel).
Ausdim uses an older XIP version which does not lose settings.
The only problem was the broken A2DP. I managed to fix this problem and Ausdim will include my solution to fix A2DP in his ROMs.
Upcoming ROMs from me and Ausdim will no longer lose settings.
I hope other ROM-cookers decide to use the older kernel too.
Click to expand...
Click to collapse
well actually the old xip didnt lose the settings, yet it cause unstable de system, problem include cant find the contacts, lose response when launch the programs from SD card after wake up. I've been suffering for a long time about it which doesnt happens with the new xip and i dont know why, with the same cooking only expect the new and old xip

themaskfly said:
well actually the old xip didnt lose the settings, yet it cause unstable de system, problem include cant find the contacts, lose response when launch the programs from SD card after wake up. I've been suffering for a long time about it which doesnt happens with the new xip and i dont know why, with the same cooking only expect the new and old xip
Click to expand...
Click to collapse
I did not experience any of the problems you describe.

adewidt said:
The problem is in the XIP section, it is in the nk.exe (kernel).
Ausdim uses an older XIP version which does not lose settings.
The only problem was the broken A2DP. I managed to fix this problem and Ausdim will include my solution to fix A2DP in his ROMs.
Upcoming ROMs from me and Ausdim will no longer lose settings.
I hope other ROM-cookers decide to use the older kernel too.
Click to expand...
Click to collapse
So if it is the XIP that matters we cant have a fix right ? Roms using the new XIP are doomed to have crappy A2DP

firiel said:
So if it is the XIP that matters we cant have a fix right ? Roms using the new XIP are doomed to have crappy A2DP
Click to expand...
Click to collapse
As I already said, I managed to fix A2DP using the old bootkernel (nk.exe part of XIP).
This works for wm6.1 and wm6.0.
There is no reason good reason to use the new kernel in stead of the old kernel.

As i say 4 months before here:
http://forum.xda-developers.com/showthread.php?t=342269
the old xip section (nk.exe) is working better with trinity 400mhz.
All my rom in this 4 months is builded with old nk.exe and i tell to cookers to use them to.
I dont see any reason to use the new (dopod) nk.exe with that very iportant bug.
No problems and nothing, nk.exe is the kernel from the device no nead to update that in the future.
The only problem it was in a2dp sound but after the fix from adewidt (Thanks again) the sound it is perfect!
Thank's

adewidt said:
I already fixed this problem in my latest ROM (version 1.2).
I created a modified XIP and changed some buetooth drivers to verify A2DP still works.
I will create a personal ROM to verify if this solutions works too!
Would be great if this is another solution to fix the problem.
Click to expand...
Click to collapse
Well after some resets, it does loose it's settings.
@adewidt
I'll try your 1.2 too, but I think the DEVICE ID of TomTom will change again (like it did whenm we switched from WM5 (official) to WM6 (DOPOD))

Stingray66 said:
Well after some resets, it does loose it's settings.
@adewidt
I'll try your 1.2 too, but I think the DEVICE ID of TomTom will change again (like it did whenm we switched from WM5 (official) to WM6 (DOPOD))
Click to expand...
Click to collapse
Yes it change your device ID.

Why my is my Hermes so unstable...

Hey. I have installed one of the new roms (19209) and of this time, my hermes always hangs (etc. when i receive a call or so, or in the morning after wake up from standby...)
Before i had Shadow 2.0 without problems (also WM6). Now (after 19209) i installed Shadow 2.1 and my hermes always hangs???
What could i do??
Please help me.
thx
pOpY

I found that I was having the same issues, phone hard reseting itself and all sorts, I did the following to resolve:
Flash to Official wwe Windows mobile 6.0 AT&T rom
update my hard spl to the latest,
replace radio rom
update to WM 6.1 image of choice,
this is supposed to be an issue witht he big storage roms screwing with the phones storage, flashing to an original rom appears to resolve.
Cheers
Steve

wow, thanks for the fast reply.
But before i flashed the Shadow 2.1 i have flashed an non big Storage Rom.
i havent tried to reflash radio yet, but i will do that and then flash an original ROm first.
Which ROM do you prefer?
Thanks
pOpY

popy2006 said:
wow, thanks for the fast reply.
But before i flashed the Shadow 2.1 i have flashed an non big Storage Rom.
i havent tried to reflash radio yet, but i will do that and then flash an original ROm first.
Which ROM do you prefer?
Thanks
pOpY
Click to expand...
Click to collapse
Hihi....
personally I suggest you to flash an official rom first ,
then go to flash the PDAviet rom ( my OS version) ,
its lightning fast and yet stable. ^_^
enjoy! ^_^

Another try....
Hey.
So i have done the following:
1. Flash HARD-SPL v9 (i had v7)
2. Check for Bad Blocks via mtty (nothing found
3. Flash Official HTC Rom (non big storage)
4. Flash Radio 1.54.30.10
5. Flash MY OS PDAviet rom (Green & Clean Version)
6. Installed my prefered Software:
PhoneAlarm
Resco Explorer
Birthdays Today Plugin
Large Startmenu
FTouchSL v2.5
PCM Keyboard 0.14
PocketCM-0.20b
S2U2 0.99p
SPB Mobile SHell 2.0
After some soft reset (while application installation) it starts up normally to the today screen and then hangs :-(
Does any of my installed software hang up???? Did anybody of you know if any of the above listed software is bad
(I could remeber that i always have installed this software without any problems (in Shadows 2.0 TE rom)).
cu
pOpY

did you make a manual hardreset after flashing the rom?

popy2006 said:
Hey.
So i have done the following:
1. Flash HARD-SPL v9 (i had v7)
2. Check for Bad Blocks via mtty (nothing found
3. Flash Official HTC Rom (non big storage)
4. Flash Radio 1.54.30.10
5. Flash MY OS PDAviet rom (Green & Clean Version)
6. Installed my prefered Software:
PhoneAlarm
Resco Explorer
Birthdays Today Plugin
Large Startmenu
FTouchSL v2.5
PCM Keyboard 0.14
PocketCM-0.20b
S2U2 0.99p
SPB Mobile SHell 2.0
After some soft reset (while application installation) it starts up normally to the today screen and then hangs :-(
Does any of my installed software hang up???? Did anybody of you know if any of the above listed software is bad
(I could remeber that i always have installed this software without any problems (in Shadows 2.0 TE rom)).
cu
pOpY
Click to expand...
Click to collapse
Hmmm. The advice given was to flash the official AT&T ROM before doing anything else ... yet I do not see that step in the list of things you've done.
Instead I see you've flashed a different one. And you still remain unsatisfied with the outcome.
If your problems persist, I would highly suggest USING the advice you've been given before seeking additonal advice. If nothing else ... just out of respect for those who gave you that advice, to begin with.
Godspeed and good luck. I am personally happy with what WM6 is giving me, without needing to push the boundaries to where they are obviously currently at a breaking point with 6.1.
But If you absolutely find you have a NEED for WM6.1, where it's been stated to be somewhat flaky right now on the Hermes, I suggest you deal with that flakiness. After you've TAKEN THE ADVICE GIVEN, if it still doesn't work to your expectations, roll back and move on.
Just my own $0.02.
-pvs

Hey isn't the "official HTC Rom" an official ROM?? Ill think it is an official non Big Storage.
Until yet no freezes.....
If it freezes i will flash an AT&T Rom first
Oll report back
cu
pOpY

rosebud said:
I found that I was having the same issues, phone hard reseting itself and all sorts, I did the following to resolve:
Flash to Official wwe Windows mobile 6.0 AT&T rom
update my hard spl to the latest,
replace radio rom
update to WM 6.1 image of choice,
this is supposed to be an issue witht he big storage roms screwing with the phones storage, flashing to an original rom appears to resolve.
Cheers
Steve
Click to expand...
Click to collapse
Ok, now it freezes again two times
Now i would try it your way.
Where can i get the AT&T Rom you have flashed?
thx
pOpY

popy2006 said:
Ok, now it freezes again two times
Now i would try it your way.
Where can i get the AT&T Rom you have flashed?
thx
pOpY
Click to expand...
Click to collapse
pOpy,
Try here: HTC's AT&T 8525 Support Page. It looks like the same ROM is still available.
Good luck in your endeavor,
-pvs

@pvs: Thanks for the link.
I hat couple of freezes in the last days. Now i have found some time to reflash the rom you given me the link. After that i would flash the 1.54.30.10 radio and the G&C rom from PDAViet.net.
Ill report back..
Thx for your help
pOpY

I have installed HardSPL-9. is this normal that my hermes hangs at 100% after flashing a rom????
The rom runs after flashing.
thx
popy

I have flashed the B&C PDAVIET Rom. I dont know if this is a bug of the rom, but no my Hermes takes about 10 secs to wake up from standby!!! Now ill miss almost every call
Please help....
thx
pOpY

pOpY,
As I had alluded to earlier, from following threads in this forum, it appears to me that the current WM6.1 ROM available is not yet ready for prime time. I have decided to remain happy with the 6.0 versions ... especially after reviewing the reports on exactly what has changed in 6.1 (not much).
Maybe it's time to honestly ask yourself if the currently available upgrade to 6.1 is really worth all this trouble.
Again, just my own POV here.
-pvs

I have the same problem with more than 6 different wm6.1 roms... it's a serious bug in wm6.1, all roms!

It seems that the wakeup bug is gone now. Just soft-Reseted my phone. Now it wakes up normally.
The wake bug i just have in the PDAVIET B&C Rom one time, now its gone (hope a long time )
In the other 19209 roms from PDAVIET i havent some of this wakeup bugs (just the other issues mentioned before).
I will report back...
cu
pOpY

Now it runs over 2 days, without a freeze
Will now install my software!
thx guys
pOpY

Now it runs for 1 week without any problems
Flashing the AT&T Rom first solved my problem!!
THX

popy2006;2137265 said:
Now it runs for 1 week without any problems
Flashing the AT&T Rom first solved my problem!!
THX
Click to expand...
Click to collapse
Great news pOpY,
Can you give a brief synopsis of what's improved in WM6.1 ... from your POV?
I'd love to hear what I'm missing out on by holding off.
-pvs

Roms for Asus P750(21042 AKU 1.6.1-last)

Hi
For all users of P750,i cook this Rom in EN(Iam from Czech Republic).I have in a plane cook a lite and Full Rom.In this Rom works without problem HTC plugins and programs,i have tested: HTC Audio manager and Today plugin,HTC Task manager,HTC Home next works Xcpuscalar and TCPMP.In Vsbenchmark 07 i have about 150 points more than in Offic.rom and Sorg Base 0.09 rom.I Have 28/29mb free ram.
Screens:
Info in Czech and download links here: http://www.wmmania.cz/forum/viewtopic.php?p=374584
New V2 (PIN Code problem fix it): http://www.edisk.cz/stahni/26603/PegasusP.nb0_62.06MB.html

Nice one, will check it out.

Do you testing this rom?I haven´t any tester.I need tester

great job
Thank u I'm tired of the memory issue with the vga rom I hope your rom is very stable. I'm testing for u but promise me to keep working on it if it's necessary.I'll tell u what.
btw did u try to install manilla 2d on it ?

Have been running for week without any major issues, M2D works well although a tad slower than the last rom i had from PDAMobiz.
Only niggle has been propensity to drop in and out of E/3G/H, strange as I would have thought that was a radio issue although I have not seen it with other roms and have been in the same location.
A good rom that has not needed a soft reset for a while.
Just about to flash to JEromes latest and test that - cheers.

sauzer: I have tried cook a Manilla rom with the same OS build,but some parts of manila doesn´t work,but i can´t fix,I haven´t any new kitchen with some better OS build,i have tried OS Build 21009(SYS and XIP),but my kitchen isn´t compactilible with this.Im using beta 2 and for me is good,i haven´t found any bug and don´t do Hardreset
And yes if i have some new OS build for QVGA,i have been cooking next better rom.
PS:I hate VGA resolution on P750,because i have 64mb of ram memory on 2.6 display is nonsense have VGA,and i have a most aplicacions for QVGA resolution.

thompson you really kick ass
This is the best rom I've ever tried it is fantastic the speed is incredible.
I never had any hang up even using opera 9.5 couldn't freeze my pda.
I have successfully installed manilla 2d and it looks great. I swear to god I was about to throw this **** and buy a different device. Thanks to you thompson I really can appreciate my asus p750.
every time I soft reset I'm impressed by the boot time, the memory is huge compared to before and it is not draining.
the only inconveniences are the Cyrillic keyboard and some Russian text(dialing rules).
Is there anyway I can use English layout for the keyboard as the default layout?
I'll keep posting if I discover something else.
many thanks

?I have in plane delete the russian keybord and give in rom Fingerkeyboard and so much better T9

I Have a new rom with OS build 21042, but i haven´t P750, can anyone test it?

Thompson111 said:
I Have a new rom with OS build 21042, but i haven´t P750, can anyone test it?
Click to expand...
Click to collapse
Is this ROM WWE? If yes - I can test it

Yeah is WWE, im from Czech republic and i make only WWE roms, roms in RU is for me nothing.I must Rom upload, and please add to your post some screens, thanks.

Rom for testing: http://www.edisk.cz/stahni/89630/PegasusP.nb0_58.78MB.html

OK. Downloading.

Some short experience?

OK. I think You use Barin WWE Kitchen from asusmobile.ru - I see same bugs with dial pad which I wrote on his topic - no buttons on PIN input screen and dialpad. How fix - don't now

I don´t use Pin codeI test it, how i have P750 at home...for me is not important.

I found what wrong - in SYS missing packet Phone_dpi_96_resh_240_resv_320.
If you add this packet from any kitchen - it's be OK!

Ok, thanks, i will repair.

New Rom: http://www.edisk.cz/stahni/26603/PegasusP.nb0_62.06MB.html

Thompson111 said:
New Rom: http://www.edisk.cz/stahni/26603/PegasusP.nb0_62.06MB.html
Click to expand...
Click to collapse
rom stable thank you very much. chat messages not alone. How can we do chat messages?

[Q] Can you make a kitchen for build 21057&

Hello all!
My cooking skill is too low for building rom based on build 21057 for HTC Trinity. May you (community) help me with this? I want wm 6.1 21057 for my p3600, i'm trying some times to *cook* this, and all times i'm get black screen or non-bootable device. Can anybody make this for me?

Hello destruct0r,
i´ve same problem. I try cooking an another Build but i think it´s same problem.
My steps i choose:
1. Dump last rom in OSKithcen-> RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship
2. import an rollup
3. change some settings (but i think i don´t know the right settings)
4. cook it
5. and flash (but it stops at 0%)
What is wrong? Can anyone help us? pls
Sorry, language isn´t good,but i try!

Hey guys,
I have not been very active on here for a while, but I just noticed your posts. Here is a completely stock OEM Kitchen with 17944 as it's SYS, and then I've imported 21057 into it also. You can open both working versions using the Open Project button. It's using osKitchen Zero.
I have not added any extra packages or modified anything, it's just straight. I also won't have a lot of time to invest in helping, but this should be a good stepping off point to start from.
I'll try to monitor this thread a little bit, but like I said, I cannot give much time at the moment.
I just flashed 21057 to my Trinity, and I have to admit, it runs pretty darn good. It has around 25MB Free Memory and 34.5MB Free Storage. If you use LZX compression when cooking, storage should increase a bit.
DOWNLOAD
You will find the Kitchen (2 Parts) and a fully working 21057 in case you want to try it first. The Kitchen is a self extracting file, Run Part 1, and the ROM is a Self Extracting and easy to flash file. Just put your phone into BootLoader Mode and double click the download, then follow the instructions.

Trinity runs a lot much better with 6.1 roms. I'll give it a try SuperSport.

PapaJasy said:
Trinity runs a lot much better with 6.1 roms. I'll give it a try SuperSport.
Click to expand...
Click to collapse
Good luck, and let me know if you find any errors.

I've tested and it's very fast.
Things that i would remove:
Get started
Windows Update
Zip ?
MIDlet Manager ? (don't know what it is)
Things that i would add:
Fingerkeyboard 2.1 (installed myself)
Google maps
Connection setup
1% battery meter
No bugs found yet.
I'll tell you about the battery performance during the weekend.
What about you folks?

PapaJasy said:
I've tested and it's very fast.
Things that i would remove:
Get started
Windows Update
Zip ?
MIDlet Manager ? (don't know what it is)
Things that i would add:
Fingerkeyboard 2.1 (installed myself)
Google maps
Connection setup
1% battery meter
No bugs found yet.
I'll tell you about the battery performance during the weekend.
What about you folks?
Click to expand...
Click to collapse
Thank you for your input PapaJasy.
ZIP is actually for Zip and Unzip of files.
Midlet is for Java Applets
Those both are part of the Stock ROM, so I left them there.
That ROM I posted was more for proof of concept, and not necessarily one I figure anyone would use full time, although you can. I just wanted to be sure it would flash and run and hopefully be bug free so people could take the Kitchen and work from it. At this point, if anyone likes the basics of the ROM, I've also posted the Kitchen so it can be modified any way the user likes.
Again, thank you for your input.

I've downloaded the kitchen and i don't understand much of it. I'll see some tutorials including yours and make a final rom for me haha.
Damn this is fast!
Thanks!

Thanks so much!!!

Hello @SuperSport,
but how do i import an another Build like 23563 and Lang (0407).
I´ve an 23563 Rollup with any Language, but when i import it i can´t choose an other Lang and i think it´s not right build i chose.
pls help
ZeroII
p.s.: small bug i can´t turn wifi on (old Commgr? i don´t know)
Sorry, language isn´t good,but i try!

Hello @SuperSport,
but how do i import an another Build like 23563 and Lang (0407).
I´ve an 23563 Rollup with any Language, but when i import it i can´t choose an other Lang and i think it´s not right build i chose.
And why does TomTom6 don´t run on your Rom´s and kitchens with right key i don´t understand this.
pls help
ZeroII
p.s.: small bug i can´t turn wifi on (old Commgr? i don´t know)
Sorry, language isn´t good,but i try!

ZeroII said:
Hello @SuperSport,
but how do i import an another Build like 23563 and Lang (0407).
I´ve an 23563 Roll-up with any Language, but when i import it i can´t choose an other Lang and i think it´s not right build i chose.
pls help
ZeroII
p.s.: small bug i can´t turn wifi on (old Commgr? i don´t know)
Sorry, language isn´t good,but i try!
Click to expand...
Click to collapse
Can you send me a download link to the Roll-Up you are trying to import? I will try to create a Video Tutorial showing how to import it.
The Wi-Fi error I am not seeing on my phone. When I turn it on, it immediately asks to hook to my home network. Does it work if you go to Start, Settings, Connections, Wi-Fi, Menu, Turn ON Wi-Fi?
PS: Your language is fine. I understand you very well, much better than some.

Thx @SuperSport for Support,
link: http://www.mediafire.com/?nh4yjbw7na9pkaa (Rollup 23563 multi lang)
I´ve repair by your instruction (insert S/N and Mac in Trin100.nb and use mtty...), how my phone brick´s i don´t know. -> therefore your kitchen work´s good.
thx ZeroII

ZeroII said:
Thx @SuperSport for Support,
link: http://www.mediafire.com/?nh4yjbw7na9pkaa (Rollup 23563 multi lang)
I´ve repair by your instruction (insert S/N and Mac in Trin100.nb and use mtty...), how my phone brick´s i don´t know. -> therefore your kitchen work´s good.
thx ZeroII
Click to expand...
Click to collapse
I am impressed that you did the WiFi fix. It can be a bit difficult, but you did it without asking how. Good Job!
I'm downloading the Roll-Up you linked to now and will get a video shortly. I'll post a link to it here when it's complete.
EDIT: Ok, I ran into the same problem as you did. The Kitchen imported the Roll-Up just fine, but when I tried to build a ROM, it would only show 0409. What I noticed is that in the OEM packages, there is one called 'OEM_Lang_0409'. When I make a copy of this package, but rename it to 'OEM_Lang_0408', it now shows two languages available to cook. The problem is that the package is still 0409, but I only changed the name. I don't know what would happen if it cooked that way, maybe it would be ok, or maybe there would be english mixed all through the ROM? I'll be giving it a try and report back...

Hello Supersport,
I´ve writen my last exam in Informatics (second semester), so I can concentrate one's energy on cooking an Trinity Rom. Have you good new´s for me? Oh, sorry first, thanks for supporting me! I hope you have good news. ;-)
I will test some configs next days.
"mfg" (-> german "mit freundlichen grüßen")
I think it´s in english "best regards", "Sincerely yours,..." or "Yours faithfully,...",
what is right?
mfg ZeroII

ZeroII said:
Hello Supersport,
I´ve writen my last exam in Informatics (second semester), so I can concentrate one's energy on cooking an Trinity Rom. Have you good new´s for me? Oh, sorry first, thanks for supporting me! I hope you have good news. ;-)
I will test some configs next days.
"mfg" (-> german "mit freundlichen grüßen")
I think it´s in english "best regards", "Sincerely yours,..." or "Yours faithfully,...",
what is right?
mfg ZeroII
Click to expand...
Click to collapse
i guess if you write "wbr" for "with best regards" SuperSport will understand
@SuperSport - still cooking??

nosedive said:
i guess if you write "wbr" for "with best regards" SuperSport will understand
@SuperSport - still cooking??
Click to expand...
Click to collapse
I have not cooked in a while. I want to get back to it, but a lot has been happening in my personal life. For the time being, I've been enjoying my Samsung Focus WP7 with Mango. Cooking takes more brain power and time than I have been able to give it lately. I'll be back.