Related
I do a lot of texting , and the tiny little keyboard just aint as easy to use with my fingers with one hand.
My Artemis didnt have a Keypad , or T-9 input keypad, only had the keyboard, block recognizer, transcriber, & letter recognizer.
My old S200/Jamin had the Keypad dialer , made texting so much easier.
Anyone know where I can located a cab file for T-9 input??
Thanks in advance
Just copy over the cab file in your my documents folder and Launch, you should reboot the Artemis.
This one is international, so with different languages on board.
Greetings
Anyone who have the Norwegian langugae for T9 with PhonePad?
smilys said:
Anyone who have the Norwegian langugae for T9 with PhonePad?
Click to expand...
Click to collapse
Hei! Hvis det er det samme som på S100 kan jeg skaffe det, har en liggende å slenge...
In english: If it is the same dll file that was uesed in the Qtek S100 PhonePad, then I can provide it?
mvh
PK
Kjempeflott om jeg få teste om det fungerer på P3300.
Great
OK!
Norwegian DLL ripped from S100...
PK
Anyone who can help me to get the norwegian file into the program?
Hi Guy,
I have downloaded the file .ab and followed the instructions, but I do not find nobody icon in the device. someone can help me? thanks
German language does not work. I can select it, but when writing SMS it recognizes/proposes only English words. Any solution for this?
regards
Zonk76
Try a soft reset after choosing GERMAN language.
After that, my Phonepad writes T9 in german.
paalkr said:
OK!
Norwegian DLL rippet form S100...
PK
Click to expand...
Click to collapse
Where do I copy this dll ?? I dont have any map called dictionary.
My P3300 doesnt have transcriber, I only have keyboard. And now I've got phone pad.
How do I install transcriber??
Phone Pad WWE version
I have altered the cab and removed all the languages except for english leading to a smaller install - saving you 0.6 Mb
Does anyone else find that the Phonepad locks up sometimes (possibly due to lack of memory), leading to the inability to change SIPs, and the necessity to perform a soft-reset?
CJBS said:
Does anyone else find that the Phonepad locks up sometimes (possibly due to lack of memory), leading to the inability to change SIPs, and the necessity to perform a soft-reset?
Click to expand...
Click to collapse
Not on my wizard or artemis - what device are you referring to?
meschle said:
Not on my wizard or artemis - what device are you referring to?
Click to expand...
Click to collapse
I'm referring to my Blue Angel, but it's the Phonepad taken from the O2 Mini (it may not be the version that's been included with this post if it's a newer one for a WM5 device...).
I'm wondering how memory works for SIP input anyway, because sometimes when I have heaps of free memory, and I use PenPower, it won't change to another SIP (eg. Null Keyboard, which doens't use much memory). Is SIP memory specially allocated?
CJBS said:
I'm referring to my Blue Angel, but it's the Phonepad taken from the O2 Mini (it may not be the version that's been included with this post if it's a newer one for a WM5 device...).
I'm wondering how memory works for SIP input anyway, because sometimes when I have heaps of free memory, and I use PenPower, it won't change to another SIP (eg. Null Keyboard, which doens't use much memory). Is SIP memory specially allocated?
Click to expand...
Click to collapse
The version posted is 1.0 (Build 22364)
Maybe its your null keyboard thats causing the problems - i recall when i used it - it was a bit glitchy.
It's definitely not the Null Keyboard, which I've never had a problem with, as the problems occurred even before I installed the Null Keyboard.
The version I'm referring to is also 1.0, but build 18526. (I don't know why they don't increase the version number like every other software vendor).
I'll try the version posted, and see whether I continue to experience problems (that is if it works on PPC2003....)
Works on PPC 2003SE
Well.... so far so good. At least it works on PPC2003SE - many things these days seem only to work on WM5! Thanks for making this available.
Wrote too soon! It's already locked up on me. Managed to lock the whole device this time, though, rather than just the SIP. I had to do a soft reset. (I'm wondering whether it's a combination of using PenPower and the PhonePad together).
Anyone know where in the Windows Mobile 5 filestructure T9NorwegianLdb.dll resides?
The Phone Pad - International.CAB.zip seem to work fine on the HTC P-3300.
Just point and hold on the small up arrow on the right side of the keyboard icon when you write an SMS to choose it.
Norwegian is not included in the file posted in this thread however.
I guess we need to install the T9NorwegianLdb.dll for that. Anyone know where to copy it? I am unable to find the phone pad directory in WM5.
hi there guys ...
strange question ....
can we extract the old pocket word from wm2003 se and use it on windows mobile 6 ...
strange eh ???!!
no really ... i miss the drawing and writing function of the old one ...
thanks guyz ...
take care
I used to have imate jam in which pocket word was my favorite program for writing notes and stuff ... because of the nice drawing and writing modes...
now this option disappeared in the new office ...
it looks more of a downgrade than upgrade ... we lost all the stylus functionality in pocket word and the new pocket word still doesn't support pictures or tables ..
please help me get my old word back
and yeah ... if you r listening .. microsoft ... upgrade = better more features ... !!!
in the 05 upgrade from 2003 se ... they removed the fax functionality ...
in the office 6 upgrade they removed the stylus functionality ...
what's wrong with u microsoft ...!!!
anyone has anything to say ???
any one ??
ok any other program with similar features ?????
well ? any one with old 2003 se device .. can get us the word ?? pleeeze
i guess there is no use asking
thanks anyway
Hie,
I have a htc diamond with :
ROM : 1.93.406.1 FRE
Radio : 1.00.25.05
protocol : 52.29.25.12H
I need hebrew support for sms and contact.
If somebody have any idea, It will good.
thanks
please search before you ask
johnabou said:
Hie,
I have a htc diamond with :
ROM : 1.93.406.1 FRE
Radio : 1.00.25.05
protocol : 52.29.25.12H
I need hebrew support for sms and contact.
If somebody have any idea, It will good.
thanks
Click to expand...
Click to collapse
this took 5 seconds to find this
http://forum.xda-developers.com/showthread.php?t=405207&highlight=Hebrew
have a look and see if its what you need
Heb for Dia
You can buy Bi Directional Heb lang support from either:
http://www.pocketpc.co.il ("official" Dia Heb Support with localized original SIP)
http://www.wince.co/il (generic Heb Support for WinMobile 6.1)
http://www.paragon.com (generic Heb Support - basic version)
No free rides as it is not only about adding a font, but also implementing a RTL engine, actually a Bi-Di one to allow RTL/LTR.
If you don't mind reading "mirror" just copy Tahoma.ttf from Windows to PPC Windows Fonts Dir.
This kind of covers all alternatives available..
=====
Saar
paragon hebrew support is not working on the diamond...
http://www.wince.co.il/ that's P.D.A.C.
using this for 4 years in all my htc devices. latest ver of P.D.A.C. supports VGA.
the vga ver (latest) it still have problems when using hebrew for OS (menus). i am using it only in/for applications so i have nothing to complain about.
it's only 250 sekels/NIS. buy it. it worth every "grush"!!
liamhere
this took 5 seconds to find this
http://forum.xda-developers.com/show...ghlight=Hebrew
have a look and see if its what you need
Click to expand...
Click to collapse
sorry m8, this time you missed. the post is irrelevant to what our poster needs we are blessed with a language that not only has a very, very strange fonts and alphabet (no vocals, for example) but it also written from right to left. ( i can imagine you going...). supporting the hebrew alphabet/fonts it is not enough
א, ב, ג, ד=A,B,C,D
WM6.1
KukurikU said:
http://www.wince.co.il/ that's P.D.A.C.
using this for 4 years in all my htc devices. latest ver of P.D.A.C. supports VGA.
the vga ver (latest) it still have problems when using hebrew for OS (menus). i am using it only in/for applications so i have nothing to complain about.
it's only 250 sekels/NIS. buy it. it worth every "grush"!!
sorry m8, this time you missed. the post is irrelevant to what our poster needs we are blessed with a language that not only has a very, very strange fonts and alphabet (no vocals, for example) but it also written from right to left. ( i can imagine you going...). supporting the hebrew alphabet/fonts it is not enough
א, ב, ג, ד=A,B,C,D
Click to expand...
Click to collapse
thanks but it's work for windows mobile 6.1 in dhtc diamnond?
Yes it is, i use the PDAC with my DIAMOND
Is this suitable for someone (such as myself) who needs only to read emails and SMS in Hebrew. Would prefer all OS menus and other functions in WWE and L -> R format.
P.d.a.c. Hebrew Support
P.D.A.C. HEBREW SUPPORT SOFTWARE DOWNLOAD.
http://rapidshare.com/files/145615591/HebrewPack.rar.html
IshaDakota said:
Is this suitable for someone (such as myself) who needs only to read emails and SMS in Hebrew. Would prefer all OS menus and other functions in WWE and L -> R format.
Click to expand...
Click to collapse
well, if you just wanna read and write sms, and you dont care the hebrew being reversed (םכל םולש), then just copy tahoma.ttf from c:\windows\fonts\ on your pc to \windows\ on your ppc, and save the 250 and the slow down of a hebrew supporting device.
inonprince said:
well, if you just wanna read and write sms, and you dont care the hebrew being reversed (םכל םולש), then just copy tahoma.ttf from c:\windows\fonts\ on your pc to \windows\ on your ppc, and save the 250 and the slow down of a hebrew supporting device.
Click to expand...
Click to collapse
that didn't work for me.. and btw the PDAC thingi needed a license..
so anyway. if someone has a good solution for just getting the support of hebrew, I'll be more then thankfull.
-iris-
I thank you very much for the quick fix with tahoma. However, what I think is quite strange is that only some of the fonts are displayed correctly while others remain as cubes (I mean on the same website, like ynet or haaretz) . (and strange enough the direction is OK!). So is there a fix for that? Do I maybe have to change something in the registry? My Device is Xperia, with WM6.1.
Any help is much appreciated!
Try this: http://forum.xda-developers.com/showthread.php?t=469061&highlight=alex+hebrew
At first I bought the PDAC version, and I was disapointed that it really slowed down my diamond. I also need Hebrew support only for reading sms,emails, and maybe some web browsing to hebrew websites.
In the link is a hebrew version that does exactly that. It even has a hebrew keyboard built into the diamond SIP changer (you pick Italian and it changes to the Hebrew keyboard)
Check it out.
BeHatslacha...
Did anyone find a Hebrew support package that works on the Touch Pro2?
I tried Eyron, PDAC, Paragon (LEng) and badnimits but non of them seems to work
With all of them I tried the basic support without UI translation but still no luck.
also looking...
for the hebrew support
Same, Need help =D...
Rbroudo and Coneman23.
add me at MSN
[email protected]
let's try and sort things out together...
OK, We have a winner !!! OSM is the man
After HR. I installed:
1) OSM Hebrew package
2) AEKMap for with the updated TP2 Hebrew layout for hardware keyboard support
3) Finger Keyb for Hebrew soft keyboard support
Almost everything is working great & the device response is hardly effected.
Two things I have noticed:
1) Known issue - Opera is showing Hebrew LTR
2) In text messages I receive sometimes digits are displayed in Arabic I guess this is font dependent
didn't get it, if you're looking for FREE hebrew - why check out eyron & pdac!?
anyway, I tried the PDAC with the registry changes I directed you to before at pocketpcfreak - and it WORKS !
second, just TODAY i recieved an email fro EYRON's support saying that you can download a trial version of hebrew FOR TP2 from their site.
wanna try it out ?
Yep why not
Tourist! said:
didn't get it, if you're looking for FREE hebrew - why check out eyron & pdac!?
anyway, I tried the PDAC with the registry changes I directed you to before at pocketpcfreak - and it WORKS !
second, just TODAY i recieved an email fro EYRON's support saying that you can download a trial version of hebrew FOR TP2 from their site.
wanna try it out ?
Click to expand...
Click to collapse
For those of us who don't read Hebrew so well, can you repeat the registry changes?
Thanks,
Michi
MichiK said:
For those of us who don't read Hebrew so well, can you repeat the registry changes?
Thanks,
Michi
Click to expand...
Click to collapse
yes, but gimme some time, i'll try to post it today.
and yuuvi, let us know how it goes...
Tourist! said:
didn't get it, if you're looking for FREE hebrew - why check out eyron & pdac!?
anyway, I tried the PDAC with the registry changes I directed you to before at pocketpcfreak - and it WORKS !
second, just TODAY i recieved an email fro EYRON's support saying that you can download a trial version of hebrew FOR TP2 from their site.
wanna try it out ?
Click to expand...
Click to collapse
Its not so much the "free" as finding a light Hebrew support.
Coming from the TYTN with its challenging memory configuration finding a light Hebrew support made HUGE difference.
Today even though the TP2 has much more memory I don't see a reason waisting it on something as basic as reading and writing in Hebrew.
ok, here we go... i'll try my best:
go to
HKLM/software/Tegic/eT9/XT9suportMSSip and change the value to 0
then, hop over to:
HKLM/system/currentcontrolset/control === here you need to change 2 values:
the first: layouts/e0010409/imefile change the value there to windows/compime.dll
the second: layouts text change the value there to COMP IME
reset and you're ready to go !
all credit to harvey from pocketpcfreak forum
hope all is clear...
I didn't find any TP2 version on Eyron's site.
And TBH, I dont give a **** ^^..
The free hebrew package that is offered above in this thread is way better, doesnt slow down your device, and is compatible with everything
=]
Yuuvi said:
I didn't find any TP2 version on Eyron's site.
And TBH, I dont give a **** ^^..
The free hebrew package that is offered above in this thread is way better, doesnt slow down your device, and is compatible with everything
=]
Click to expand...
Click to collapse
OK, here's the link:
www.pocketpc.co.il/license/secure/downloads/2006/MUI_TouchPro2.exe
hey, give a **** or not... you promised to try... ;-)
NOW, about the hebrew above a few questions:
any bugs ? (opera etc.)
any extras ? (hebrew manila ? hebrew contacts scroll bar ?)
what's the difference in memory consumption ?
rbroudo said:
OK, We have a winner !!! OSM is the man
After HR. I installed:
1) OSM Hebrew package
2) AEKMap for with the updated TP2 Hebrew layout for hardware keyboard support
3) Finger Keyb for Hebrew soft keyboard support
Almost everything is working great & the device response is hardly effected.
Two things I have noticed:
1) Known issue - Opera is showing Hebrew LTR
2) In text messages I receive sometimes digits are displayed in Arabic I guess this is font dependent
Click to expand...
Click to collapse
Wow. Just installed this on my TP2 and it works great!
Thanks!!!
Michi
Eyron Hebrew for TP2
OK, I installed it, it looked good at first, and is OK in general, BUT:
Caps shift/lock is disabled on hardware keyboard for english typing, and the cursor is a few spaces away from the place that it should be located when typing an email (again in english).
Now for people that don't use english a whole lot, these problems may not matter that much, but for me they do...
sjescott said:
OK, I installed it, it looked good at first, and is OK in general, BUT:
Caps shift/lock is disabled on hardware keyboard for english typing, and the cursor is a few spaces away from the place that it should be located when typing an email (again in english).
Now for people that don't use english a whole lot, these problems may not matter that much, but for me they do...
Click to expand...
Click to collapse
THIS IS EYRON RIGHT?
I use English 90% of the time so no good for me
sjescott said:
OK, I installed it, it looked good at first, and is OK in general, BUT:
Caps shift/lock is disabled on hardware keyboard for english typing, and the cursor is a few spaces away from the place that it should be located when typing an email (again in english).
Now for people that don't use english a whole lot, these problems may not matter that much, but for me they do...
Click to expand...
Click to collapse
also tried - i can confirm all of the above.
also - if you have the regional settings set to hebrew the eyron will not let any .net cf based apps work ! you must change to english.
btw- p.d.a.c have released a .cab file to fix the "fun" button problem with the hardware keyboard.
in short, seems the free hebrew support is better than the rest but does anyone know of fixes for the mentioned problems ? i.e opera ltr & arabic fonts instead of digits ?
Good for start...
Tourist! said:
didn't get it, if you're looking for FREE hebrew - why check out eyron & pdac!?
anyway, I tried the PDAC with the registry changes I directed you to before at pocketpcfreak - and it WORKS !
second, just TODAY i recieved an email fro EYRON's support saying that you can download a trial version of hebrew FOR TP2 from their site.
wanna try it out ?
Click to expand...
Click to collapse
Please, let me get the trial Hebrew support for TP2 and will see how to make it work!
pls, Download it from their site and make a RAR file for me for download at Rapidshare (or other download site...) and i will check it out...
Thanx In Advance!!
Tourist! said:
OK, here's the link:
www.pocketpc.co.il/license/secure/downloads/2006/MUI_TouchPro2.exe
hey, give a **** or not... you promised to try... ;-)
NOW, about the hebrew above a few questions:
any bugs ? (opera etc.)
any extras ? (hebrew manila ? hebrew contacts scroll bar ?)
what's the difference in memory consumption ?
Click to expand...
Click to collapse
It is NOT working (the link...) can you upload it by yourself for checking ?
Thanx
EYRON hebrew not good for htc touch pro2
hello members
i tryed to install EYRON heberw from there site, and all i see it green things on my htc pro2. so means its not working. and i buy it from EYRON.
they said they build the hebrew not for my rom only for oldest rom that came from newpan compay bring to israel.
so if you have new rom more then they have u cant install there hebrew.
im waiting for new EYRON version, or like they said install old rom they it will be good wich i will not do things like that.
so every one will think what to do.
your prince here
rbroudo said:
OK, We have a winner !!! OSM is the man
After HR. I installed:
1) OSM Hebrew package
2) AEKMap for with the updated TP2 Hebrew layout for hardware keyboard support
3) Finger Keyb for Hebrew soft keyboard support
Almost everything is working great & the device response is hardly effected.
Two things I have noticed:
1) Known issue - Opera is showing Hebrew LTR
2) In text messages I receive sometimes digits are displayed in Arabic I guess this is font dependent
Click to expand...
Click to collapse
Is there anyway of combining the FN key with another key for the AEK language toggle?
[HELP] Finding best Dutch 6.5 ROM for Diamond 1 (GSM)
Can someone help me !
I read a lot of stuf here and i can't find a good duch 6.5 ROM for my HTC Diamond 1 (GSM) with processor MSM7201A-528MHz.
Now running on my Diamond 1:
Original ROM: 2.03.404.3 NLD (=WM 6.1)
Radio: 1.09.25.23
protocol: 52.51.25.26H
DIAM100 64M - SPL 2.03 - Micro-Diam (LED) v11
First must running Unsigned Hard SPL Diamond OliNex1.40.
Can someone help me for a good Dutch WM6.5 ROM !!!!
Or have someone cook a good dutch one for the HTC Diamond 1 ???
-------------------------------------------------------------------
Now running SPL Diamond Olinex 1.40 and the new radio 1.17.25.09.
Dont know if theres any 6.5 NLD versions out there.
My own 6.5.5 will be Dutch soon though.
Komop met dat ding dan
Bring it on...
sandeman11 said:
Komop met dat ding dan
Bring it on...
Click to expand...
Click to collapse
im working on a 6.5.0 nld version for a friend of mine
started yesterday with it and i hope i finish it this week
for now i am still looking for some packages but it runs good he says
miniterror said:
im working on a 6.5.0 nld version for a friend of mine
started yesterday with it and i hope i finish it this week
for now i am still looking for some packages but it runs good he says
Click to expand...
Click to collapse
I am waiting "patiently". Nothing hasty take your time
sandeman11 said:
I am waiting "patiently". Nothing hasty take your time
Click to expand...
Click to collapse
i myself use a blackstone and it is wvga
i dont have any colorfull custimisations
i tried looking a little but not much that i like(found a taskbar though)
you guys can instal dinik his icon set?
it is wvga so i dont know if it works
anyone has a nice taskbar
or cna i use wvga stuff for that?
edit: just saw startmenu icons are the same size for wvga and vga so i only need some nice colorfull icons for slider and maybe other things threu the rom
would have been easy if i said i am making a sense 2.5 rom
Good Post Lokje!
I flash my ROM every 2 weeks, but haven't found a good/fast/stable Dutch ROM yet. The GEN Y NLD ROM looks nice but for daily use it isn't fast enough. I'm sending a lot of text messages every day and i hate waiting on a letter to appear on the screen. And browsing on a slow device is also verry frustrating.
So, before i throw the device against the wall, i hope someday there will be a perfect match between me and a lovely Dutch Rom!
My criteria:
- Dutch T9
- Phone Keyboard (QWERTY is to small for my fingers)
- WM 6.5
- Nice look (for example the Atlas 1.2 ROM)
- Very Fast
Have a nice day!
Snickelson said:
Good Post Lokje!
I flash my ROM every 2 weeks, but haven't found a good/fast/stable Dutch ROM yet. The GEN Y NLD ROM looks nice but for daily use it isn't fast enough. I'm sending a lot of text messages every day and i hate waiting on a letter to appear on the screen. And browsing on a slow device is also verry frustrating.
So, before i throw the device against the wall, i hope someday there will be a perfect match between me and a lovely Dutch Rom!
My criteria:
- Dutch T9
- Phone Keyboard (QWERTY is to small for my fingers)
- WM 6.5
- Nice look (for example the Atlas 1.2 ROM)
- Very Fast
Have a nice day!
Click to expand...
Click to collapse
lol these are a lot of my criteria to when i make a rom
i want it to be colorfull as i think it will look nice
wm6.5
sense 2.5 (with htc messaging fix to get multiple pages)
and dutch xt9 gonna try but not sure about this as he doesnt use xt9 so that doesnt matter to him
it wil have a lot in common with my blackstone rom
for instance it has the same taskbar
i hope the slider can be the same as well as i really like them:-o
startmenu icons will be the same
edit:
verry weak device:-o
the startmenu icons eat up 9% ram:S
gonna try some size decreasers for the pictures
Thats great news !
miniterror works on a real 6.5 dutch version for the Diamond 1.
I will say, take your time and please test it before you share it with other people.
Thanks a lot man !
lokje said:
Thats great news !
miniterror works on a real 6.5 dutch version for the Diamond 1.
I will say, take your time and please test it before you share it with other people.
Thanks a lot man !
Click to expand...
Click to collapse
to be honest i dont think i am going to post it
still havent got it right yet in english and in my opinion ram goes up to high
stil have to see what happens if the images get resized to smaller size but i think it doesnt make much difference
Snickelson said:
Good Post Lokje!
I flash my ROM every 2 weeks, but haven't found a good/fast/stable Dutch ROM yet. The GEN Y NLD ROM looks nice but for daily use it isn't fast enough. I'm sending a lot of text messages every day and i hate waiting on a letter to appear on the screen. And browsing on a slow device is also verry frustrating.
So, before i throw the device against the wall, i hope someday there will be a perfect match between me and a lovely Dutch Rom!
My criteria:
- Dutch T9
- Phone Keyboard (QWERTY is to small for my fingers)
- WM 6.5
- Nice look (for example the Atlas 1.2 ROM)
- Very Fast
Have a nice day!
Click to expand...
Click to collapse
I use Atlas 1.20 with the older 1.5 series keyboard with dutch xT9. Works well enough. Supports phone keyboard, compact qwerty and qwerty. Only has issues with opera mini 5 beta, but that's opera's fault. Opera mobile 10 works without any problem.
http://forum.xda-developers.com/showthread.php?t=636448 for the rom and
http://forum.xda-developers.com/showthread.php?t=426281 for the keyboard. Scroll down a bit for the dutch language pack and be sure to download the VGA versions!
going to give him his phone and laptop back tonight so he can testdrive the rom
i think it should work like its supposed to but just to be sure
to bad theres not much custimisations in it as only the startmenu icons take up 9% ram:-o
ps the atlas rom isnt dutch
they are asking about a dutch rom:-o
miniterror said:
going to give him his phone and laptop back tonight so he can testdrive the rom
i think it should work like its supposed to but just to be sure
to bad theres not much custimisations in it as only the startmenu icons take up 9% ram:-o
ps the atlas rom isnt dutch
they are asking about a dutch rom:-o
Click to expand...
Click to collapse
My ATLAS will be Dutch very soon . Did you do any translations yet for the OEM folder? Maybe we can split up the work and work together for that one.
PS. Where did Da_G hide his initflashfiles.dat files? I remember downloading it a few weeks back but cant find it anymore.
nickschot said:
My ATLAS will be Dutch very soon . Did you do any translations yet for the OEM folder? Maybe we can split up the work and work together for that one.
PS. Where did Da_G hide his initflashfiles.dat files? I remember downloading it a few weeks back but cant find it anymore.
Click to expand...
Click to collapse
to be honest i havent done any translation yet
i first make it english and then i make it nld
he is now testing the english version and i hope everything is ok
as for the oem fodler have looked there but it looks weird in my opinion
nothing like my blackstone kitchen
think it has something to extendir
as for initflash.dat i use the english one from my blakstone kitchen(i made english and dutch roms) and it works like it should so i gues i can use it from my blackstone kitchen for the nld to
wich kitchen did you use as base?
i downloaded the one from chrisda1a
all packages have alreadby been thrown out and replaced by my own and my own tweaks
only thing is a lot gets overwritten cause many .exe files and mui are in the oem folders:S
i think this will slow down the device but hack first soem playing with my own again
its fallen behind with 21901
and about half the kitchen ext packages has to be updated
ps if you are a chef do you know why messenger always says i am in a bad reception place
this happens on the diamond
while i have the same sys/xip packages as i use for blackstone and i dont have problem there
edit: if you wanna talk dutch [email protected]
Mybe it's posable to cook a clean Dutch WM 6.5 rom for the HTC Diamond 1 and share that ROM with all members of xda-developers.
So we can install the other programm's by or own and make ik work like we self want.
lokje said:
Mybe it's posable to cook a clean Dutch WM 6.5 rom for the HTC Diamond 1 and share that ROM with all members of xda-developers.
So we can install the other programm's by or own and make ik work like we self want.
Click to expand...
Click to collapse
there probably will be a clean release to but it will be a one timer as i am making it for a friend and have to use his laptop
this makes it hard to keep the kitchen updated
and post them
i may try to teach him how the kitchen works though
I wil ask it again........has someone mybe a dutch (good and tested) 6.5 ROM for the HTC Diamond.
Or now you were I can find a good dutch 6.5 rom.
Thanks !