I do a lot of texting , and the tiny little keyboard just aint as easy to use with my fingers with one hand.
My Artemis didnt have a Keypad , or T-9 input keypad, only had the keyboard, block recognizer, transcriber, & letter recognizer.
My old S200/Jamin had the Keypad dialer , made texting so much easier.
Anyone know where I can located a cab file for T-9 input??
Thanks in advance
Just copy over the cab file in your my documents folder and Launch, you should reboot the Artemis.
This one is international, so with different languages on board.
Greetings
Anyone who have the Norwegian langugae for T9 with PhonePad?
smilys said:
Anyone who have the Norwegian langugae for T9 with PhonePad?
Click to expand...
Click to collapse
Hei! Hvis det er det samme som på S100 kan jeg skaffe det, har en liggende å slenge...
In english: If it is the same dll file that was uesed in the Qtek S100 PhonePad, then I can provide it?
mvh
PK
Kjempeflott om jeg få teste om det fungerer på P3300.
Great
OK!
Norwegian DLL ripped from S100...
PK
Anyone who can help me to get the norwegian file into the program?
Hi Guy,
I have downloaded the file .ab and followed the instructions, but I do not find nobody icon in the device. someone can help me? thanks
German language does not work. I can select it, but when writing SMS it recognizes/proposes only English words. Any solution for this?
regards
Zonk76
Try a soft reset after choosing GERMAN language.
After that, my Phonepad writes T9 in german.
paalkr said:
OK!
Norwegian DLL rippet form S100...
PK
Click to expand...
Click to collapse
Where do I copy this dll ?? I dont have any map called dictionary.
My P3300 doesnt have transcriber, I only have keyboard. And now I've got phone pad.
How do I install transcriber??
Phone Pad WWE version
I have altered the cab and removed all the languages except for english leading to a smaller install - saving you 0.6 Mb
Does anyone else find that the Phonepad locks up sometimes (possibly due to lack of memory), leading to the inability to change SIPs, and the necessity to perform a soft-reset?
CJBS said:
Does anyone else find that the Phonepad locks up sometimes (possibly due to lack of memory), leading to the inability to change SIPs, and the necessity to perform a soft-reset?
Click to expand...
Click to collapse
Not on my wizard or artemis - what device are you referring to?
meschle said:
Not on my wizard or artemis - what device are you referring to?
Click to expand...
Click to collapse
I'm referring to my Blue Angel, but it's the Phonepad taken from the O2 Mini (it may not be the version that's been included with this post if it's a newer one for a WM5 device...).
I'm wondering how memory works for SIP input anyway, because sometimes when I have heaps of free memory, and I use PenPower, it won't change to another SIP (eg. Null Keyboard, which doens't use much memory). Is SIP memory specially allocated?
CJBS said:
I'm referring to my Blue Angel, but it's the Phonepad taken from the O2 Mini (it may not be the version that's been included with this post if it's a newer one for a WM5 device...).
I'm wondering how memory works for SIP input anyway, because sometimes when I have heaps of free memory, and I use PenPower, it won't change to another SIP (eg. Null Keyboard, which doens't use much memory). Is SIP memory specially allocated?
Click to expand...
Click to collapse
The version posted is 1.0 (Build 22364)
Maybe its your null keyboard thats causing the problems - i recall when i used it - it was a bit glitchy.
It's definitely not the Null Keyboard, which I've never had a problem with, as the problems occurred even before I installed the Null Keyboard.
The version I'm referring to is also 1.0, but build 18526. (I don't know why they don't increase the version number like every other software vendor).
I'll try the version posted, and see whether I continue to experience problems (that is if it works on PPC2003....)
Works on PPC 2003SE
Well.... so far so good. At least it works on PPC2003SE - many things these days seem only to work on WM5! Thanks for making this available.
Wrote too soon! It's already locked up on me. Managed to lock the whole device this time, though, rather than just the SIP. I had to do a soft reset. (I'm wondering whether it's a combination of using PenPower and the PhonePad together).
Anyone know where in the Windows Mobile 5 filestructure T9NorwegianLdb.dll resides?
The Phone Pad - International.CAB.zip seem to work fine on the HTC P-3300.
Just point and hold on the small up arrow on the right side of the keyboard icon when you write an SMS to choose it.
Norwegian is not included in the file posted in this thread however.
I guess we need to install the T9NorwegianLdb.dll for that. Anyone know where to copy it? I am unable to find the phone pad directory in WM5.
Related
I read in an article on ppcw.net that the XDAIIi (yes 'i') has so called Itellipad and Intellidial.
Both techniques offer a better useable input manner (as compared to a qwerty stylus keyboard) especially for on-the-road-use: big buttons with the same functioning as keys on a regular mobile phone.
I know there is a tool called 'blimkeys' that has about this functionality, but apparently Microsoft (or O2) has put it into a new device as standard s/w.
Has anyone seen a ROM file that has Intellipad / Intellidial in it?
If so: PLZ post it here!!!
I would like to see if it would be possible to implemetn on a Himalaya.
edit: See my post from 14-12 in which I uploaded the iMate JAM versions
see this thread
http://forum.xda-developers.com/viewtopic.php?t=13066&highlight=
works on my XDAII and MDAIII in English, it must use default dictionary.
Do you mean you simply installed the cab and then was able to continue using an English language dialer?
That would be great.
Not the dialer - haven't seen a cab for that- but the T9 works great!
I dont get it:
The Intellipad stuff (T9 is just a feature of that) seems to be integrated with the dialer. Fro what I understand now is that IntelliPad and InterlliDialer are two different apps . . .
Is the IntelliPad from T9.cab English or German language?
And how about the IntelliPad/T9 colours (especially the Intellipad specific button-colours), are they T-Mobile pinkish or default/O2 blue?
Could you also post the contents of the following registry branch (I noted the defaults):
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\IntelliPad]
"Languages"=dword:00000001
"PopupMenu"=dword:00000001
"DockList"=dword:00000000
"OneSymbol"=dword:00000001
"AddSpace"=dword:00000001
"PlaySound"=dword:00000001
"HelpFile"="IntelliPad-1.0-(German).htm"
"ResourceFile"="IntelliPadRCGerman.dll"
There is no dialer, just T9 sip for typing SMS or using in any program. So the Intelidialer must be a separate app.
The colours are T-Mobile default pinkish (yuk) and all the registry settings are as you posted. It must use the default dictionary because although it says that it's German it is suggesting English words.
Thanks, thats what i thought.
Guess we have to wait for Non-T-Mobile versions of the device to come out before we can use a non-pinkish SIP.
From what I read on ppc-welt.info I am quite sure the dialer is in the ExtROM of the Magician too as 'Intellidialer.cab' (original name :wink: )
Now If someone could post that cab!
That would be great.
IntelliDialer
and remeber... this cab is for test purposes only...
Hey anyone out there get the intellidialer to work on xda2?don't seems to be working.
The dialer seems to identify a Himalaya and thus showing only the 'old' dialer (well, it is a different T-Mobile one, but even more awful than the original)
Will the IntelliDialer works on an I-Mate PDA2K?
Have a try!
Maybe it only works on Magician, maybe it just needs WM2003SE (like Blue Angel)
Plz post the results
I didn't work out for me.
The only thing it did on my I-Mate PDA2K was changing the dialskin to that ugly pink T Mobile dialer
Tried Intellidialer on English MDAIII - works fine, but in German, still I can see my contacts and dial with one hand!
IntelliDialer
With regards to the IntelliDialer does anybody know does the Magician run on WM2003SE?
And if so does WM2003SE integrates with .NET Framework?
I suspect we have to install .NET to get this baby working.
yes, the magician runs on WM2003SE, but apparently the program somehow is tied up with the dialer, since I'm running .net framework and It still doesn't work.
Oops
Yorch said:
yes, the magician runs on WM2003SE, but apparently the program somehow is tied up with the dialer, since I'm running .net framework and It still doesn't work.
Click to expand...
Click to collapse
You are right and I was wrong Bro.
Went over the CABs and it adds up.
Since Intellidialer can de transferred succesfully to other devices based on certain pre-requisites (below one user managed to get it to work on a MDAII onother did not succeed on pda2k) we need to find out WHAT pre-requisites (hopefully its not SE dependent).
Now If both xda-rocks and VW_ELM could publish their config . . .
Intellidialer appears to be reliant on WM2003SE.
It was suggested on ppc-welt.info forums that maybe the cprog.exe version could make the difference.
Hence what we need is:
English Intellidialer.cab
English WM2003SE cprog.exe
(ans still off course an english Intellipad )
Original released at PDAFans (http://bbs.pdafans.com/thread-333961-1-1.html) by 午木.
Keyboard layout is following Japanese model X01ht, so I guess for other models you will have to manually fix the registry. Not sure how to do that though.
Internet and MMS configuration for China Mobile are added, can be removed manually. In fact I had them removed as I am living overseas and only need my Hermes to display Chinese properly.
There is no Chinese input included in this software.
Been using it with both XDA Live and Black Edition, works fine for both.
Good jobs mates,
Do you have Big5 one?
Thanks,
jacky820 said:
Good jobs mates,
Do you have Big5 one?
Thanks,
Click to expand...
Click to collapse
Not at this moment, you may want to try some Taiwan PDA forums for that.
The majority at PDAFans are from the Mainland. Hence what ever you get there are most probably in Simplified Chinese.
Alternatively you can always use the latest WM5 firmware released in Taiwan which is in Traditional Chinese, it includes Taiwan style Chinese inputs as well, of which I don't really like.
*shrugs*
jacky820 said:
Good jobs mates,
Do you have Big5 one?
Thanks,
Click to expand...
Click to collapse
I cooked myself a rom that has CE-Star (Big5 displaying, PinYin input, Hand Writing input and Cantonese Input)...works pretty well...except one little bug I still need to figure out was the hand writing input part..can't do full screen, but hand writing in a "box" type has no problems.
This is the registry key that needs to be changed for those with different keyboard layouts:
HKEY_LOCAL_MACHINE\Software\Oem\Qwerty
There is a key 'Layout' (in DWORD, hexadecimal) that needs to be changed to one of the following:
For default English layout: 20409 (132105 decimal),
Chinese layout: 20404 (132100 in decimal),
German layout: 20407 (132103 in decimal)
Thanks for an efficient way how to show Chinese characters
After I installed this font in softbank x01ht. the japanese input can not work. I thought there may be some problem with keyboard setting, I changed HKEY_LOCAL_MACHINE\Software\Oem\Qwerty to 197649(japanese keyboard setting), however it does not work!
Chinese Display Problem
Hi Guys,
After i installed either the CE-Star or the Chinese Font Support Cab on WM6 English Ver, the Chinese character both looks very light and small (in contacts, words, dictionary software, etc). It really does not look good compare to my previous WM5 + CE-Star which is not installed by myself. It looked very clear, solid and smooth.
Anyone knows how to fix this problem?
Thanks a lot.
Just disable ClearType. may get better.
VOW, It really works!
Cedricguo said:
Just disable ClearType. may get better.
Click to expand...
Click to collapse
Chinese Fonts look much much better now. Thanks a lot!
Just Need China Mobile Network Settings
I already have a cooked rom that has fonts for simplified Chinese, so I just need the China Mobile Network settings. After installing this cab file, it conflicts with Ce-Star input through pinyin. Can a helpful cooker pls extract just the china mobile network settings and create a cab file for me.
chinese freeware for ppc
freeware chinese for ppc ,wm5 & wm6
include hand writing, ping yin
http://www.htc.com.my/download/chinesefreeware.zip
CAB
amituofo said:
freeware chinese for ppc ,wm5 & wm6
include hand writing, ping yin
http://www.htc.com.my/download/chinesefreeware.zip
Click to expand...
Click to collapse
Can you explain which cab is for what.
Thanks
iso
i'm a yahei user!....飘过（老外，开始学中文吧）
amituofo said:
freeware chinese for ppc ,wm5 & wm6
include hand writing, ping yin
http://www.htc.com.my/download/chinesefreeware.zip
Click to expand...
Click to collapse
Are the SIP cab files for VGA or QVGA?
Which one include reading Big5 chinese characters?
smaller size chinese support font
freeware chinese for ppc ,wm5 & wm6
include hand writing, ping yin
http://www.htc.com.my/download/chinesefreeware.zip
I'm having an interesting problem. As soon as I install the cab that holds the actual Chinese character support (at least, I think that's what it holds) calles ChineseSG.cab I do indeed get chinese characters on my WM6 Artemis. However, this install completely disables my ability to read and write text, email and mms messages. When I try to read or write a message the screen just becomes white and un-editable. Anyone else got this problem and might be able to help me fix it?
-edit-
I tried the other package, the one that started this thread Chinese.Support.Song.cab and it gives me the some problems. In message overviews of for instance my inbox I can see the content of text messages, both Latin and Chinese characters, however as soon as I open a message to read it or write a new one the screen is just empty. I have the buttons at the bottom, but no text appears.
Menara said:
I'm having an interesting problem. As soon as I install the cab that holds the actual Chinese character support (at least, I think that's what it holds) calles ChineseSG.cab I do indeed get chinese characters on my WM6 Artemis. However, this install completely disables my ability to read and write text, email and mms messages. When I try to read or write a message the screen just becomes white and un-editable. Anyone else got this problem and might be able to help me fix it?
-edit-
I tried the other package, the one that started this thread Chinese.Support.Song.cab and it gives me the some problems. In message overviews of for instance my inbox I can see the content of text messages, both Latin and Chinese characters, however as soon as I open a message to read it or write a new one the screen is just empty. I have the buttons at the bottom, but no text appears.
Click to expand...
Click to collapse
Yes you are right. After installed the Chinese.Support.Song.cab into WM6.1
The sms will not run or displayed properly. I do have the same problem. If you uninstall the Chinese.Support.Song.cab again. The problem still remained the same. Unless you do a hard reset. However, after the hard reset I installed CE- star have no conflict with WM6.1. The sms work perfectly and I can read chinese even in Window Media Player or Audio Manager.
Oh Ya. Try SMS Delivery FIX by Saman It's work after you activated the setting. All the message can be see.
Hi,
I installed your chinese font to my ipac 100. However my keyboard backspace and left right arrows don't work any more.
Also in Messaging can't see emails...
was wondering how I could restore these funcionts... I would really appreciate it.
I uninstall the cab file, but those functions are still messed up.
Thanks
Jer
Can someone help me out on installing just a Chinese font on my HTC At&t tilt? Lets pretend I am a complete idiot and know nothing. I just need to be able to see Chinese fonts when they come in on text messages so someone can translate them for me.
Thanks to HKBoySiR for this fix:
This .cab fixes the keyboard problems for the english language version of WM 6.1
HKBoySiR said:
I've just put together a cab file that replicates the original T-Mobile Dash's keyboard. No oddities so far. Hope this fixes some of the stranger keyboard issues.
Click to expand...
Click to collapse
Would be nice having such a Fix for the German keyboard layout as well...it recognizes all the symbols, except of CAP and 0...hope somebody can help
Send me the german keyboard map, text file and I'll fix it for you.
Are you supposed to install it like a cab file because it's not working for me
slobalt said:
Are you supposed to install it like a cab file because it's not working for me
Click to expand...
Click to collapse
Yes, you install it like a .cab, then you reboot.
i dont know if it worked yet but after i installed it on my tmobile dash with windows 6.1 it informed me that the program might not work because it was designed for a previous version of software.................... YESS THANKS SOOO MUCH IT WORKS LIKE A CHARM I APPRECIATE THE INSTRUCTIONS GIVEN ABOVE
OrganicM said:
Send me the german keyboard map, text file and I'll fix it for you.
Click to expand...
Click to collapse
May I also have the german key map file fixed, please?
Thanks
Chris
Which S620 Version?
I'm not sure which S620 version I have -- it is European and has the QWERTY layout, with the symbols for the British Pound, US Dollar, and Euro on the J, K, and L keys respectively.
I have the latest KAVANA WM6.1 ROM installed (GREAT!). However, I believe I mistakenly installed the US English Dash key map, which works great for the letters a-z, but some of the symbols do not match the keys (FN-Q is % instead of !, FN-N is & instead of @, etc.). I'm guessing this is a UK English keyboard, since I bought this S620 from eBay and it has a 220V charger. Anyway, any ideas how I get the map to match all the symbols on my keyboard?
I've done quite a bit of searching different threads on this forum but have not so far been able to find the answer.
genglish said:
I'm not sure which S620 version I have -- it is European and has the QWERTY layout, with the symbols for the British Pound, US Dollar, and Euro on the J, K, and L keys respectively.
I have the latest KAVANA WM6.1 ROM installed (GREAT!). However, I believe I mistakenly installed the US English Dash key map, which works great for the letters a-z, but some of the symbols do not match the keys (FN-Q is % instead of !, FN-N is & instead of @, etc.). I'm guessing this is a UK English keyboard, since I bought this S620 from eBay and it has a 220V charger. Anyway, any ideas how I get the map to match all the symbols on my keyboard?
I've done quite a bit of searching different threads on this forum but have not so far been able to find the answer.
Click to expand...
Click to collapse
me too
i have same device with same keyboard.
please help
Hi,
I think my phone is french. Check this pic below:
http://ouziel.blogs.com/photos/uncategorized/route_66.jpg
My keyboard layout is like this...
Can a .cab file be done to fix the wm6.1 kavana update ???
Thanks
hello.
here is attached picture of my keyboard. please help us creating keymap file for this device.
can someone tell me the origin of my keyboard? is it Europe or US?
kurilo said:
hello.
here is attached picture of my keyboard. please help us creating keymap file for this device.
can someone tell me the origin of my keyboard? is it Europe or US?
Click to expand...
Click to collapse
It looks to be a UK or British keyboard. The British pounds symbol is on one of the keys. That's a sure sign that it's not a US keyboard.
Any uk keyboard mapping support
hey all, is there a uk keyboard mapping cab file yet?
Check in your \Start Menu\My Tools\Extras
do you have a file called "Excalibur eT9 Changer" if you do....click on it and choose the respective layout you need.
You can pick from:
UK Excalibur KeyMap
USA Excalibur KeyMap
Spanish Excalibur KeyMap
Portuguese Excalibur KeyMap
German Excalibur KeyMap
Italian Excalibur KeyMap
If not i can upload the the files needed.
Mikey1022 said:
Check in your \Start Menu\My Tools\Extras
do you have a file called "Excalibur eT9 Changer" if you do....click on it and choose the respective layout you need.
You can pick from:
UK Excalibur KeyMap
USA Excalibur KeyMap
Spanish Excalibur KeyMap
Portuguese Excalibur KeyMap
German Excalibur KeyMap
Italian Excalibur KeyMap
If not i can upload the the files needed.
Click to expand...
Click to collapse
Maybe I am missing something...?? When I go to my Start Menu...I don't see a MY Tools?
Pummel454 said:
Maybe I am missing something...?? When I go to my Start Menu...I don't see a MY Tools?
Click to expand...
Click to collapse
Which Rom are you using??
Key mapp works
i installed the full mapping cab and all is good now. Also, i have no 'my tools' in the start menu. i installed the kavana 6.1 rom.
When I do a long press-and-hold on the period and comma keys, I don't get a semi-colon or colon... just a period or comma. But when I do alt-period or alt-comma, then I do get the semi-colon and colon. I think these are the only keys this happens on, at least that I've seen so far. Anyone else?
Yes, it's a fairly common thing with the new ROMs. Neither of the t9 fixes will help you with it.
thanks guys worked like a charm
Hi,
I've done some work on the keyboard cab available on the diamond forum and adapted it to the touch HD.
I've also addressed some issues that the diamond version suffers from.
Here's a list of what's been done:
Version 1.00:
- Graphics for Compact Qwerty & Phone Keypad have been recreated to accomodate the HD
- Landscape mode integrated into the cab
- Fixed kdb files for Full Qwerty, Compact Qwerty and Phone Pad
- Hebrew doesn't replace Italian anymore! Instead, it is added above Italian
- Hebrew-related files and registry keys are named properly with the correct codes and names and according to the convention in other language-related files.
- T9 works partially. It will learn the words you use and will suggest according to that. Unfortunately I couldn't find a compatible t9 dictionary (and believe me I tried!)
Installation instructions:
1. Download the attached CAB
2. Copy to your memory card via ActiveSync
3. IMPORTANT: Using Schap's Advanced Task Manager (or any other capable program), kill the process SIPGT_app.exe
4. Run the CAB
5. Soft reset
I've tested this with a UK 1.14 ROM and the free hebrew support.
I do not recommend installing this alongside Eyron (didn't try) as it also attempts to modify the native keyboard and would probably conflict.
Congratulations you have a (almost) native HD hebrew keyboard!
For tactile feedback (ala Eyron) I recommend installing snailslug's great TouchResponse (http://forum.xda-developers.com/showthread.php?t=450256) you can configure it to work only when the keyboard is open and the stylus is in and it provides very good feel without slowing down the device.
On the T9 front, I'd be happy if anyone could help me out. If you could get me some hebrew ldb dictionary files from ANY phone with T9 it might help me decipher this evil proprietary format.
I'd like to thank Alex for the original diamond cab and also nir36 and everyone who contributed to the development of the free hebrew support.
(Note that the attached cab is provided as is and I take no responsibility in case your device bursts into flames.)
Cheers!
Thanks!
how do you change from hebrew to english? there is an option to do it with the ABC->T9 button? I'm using the txt files from Eyron mui.cab to replace the Italian in my device but it seems to have some kind of bug when i'm replacing it from english to hebrew - the kbd will stuck for 5 minutes every time! and there is no half qwerty or phone pad option...
I'll try your version soon and will report back to you.
Good job!
I'll try it out today and let you know how it works.
tnx very much !!!!
daniel
Please post your skins.
Hi. just checked your files - great work!
I used to extract the files from Eyron cabs and use them on my device, but it was good only for the full qwerty - and it replaced the Italian on my device, your solution is much better.
and now - for the T9 thing - it works only in half qwerty and phone pad modes, not in the full qwerty mode.
any way - great work. you made a great solution for the free-hebrew community
*Big* thanks. Works perfectly!
avimak said:
Thanks!
how do you change from hebrew to english? there is an option to do it with the ABC->T9 button? I'm using the txt files from Eyron mui.cab to replace the Italian in my device but it seems to have some kind of bug when i'm replacing it from english to hebrew - the kbd will stuck for 5 minutes every time! and there is no half qwerty or phone pad option...
I'll try your version soon and will report back to you.
Click to expand...
Click to collapse
No there isn't. It's impossible to implement. the only way to switch languages with ezinput is through the menu..
avimak said:
Hi. just checked your files - great work!
I used to extract the files from Eyron cabs and use them on my device, but it was good only for the full qwerty - and it replaced the Italian on my device, your solution is much better.
and now - for the T9 thing - it works only in half qwerty and phone pad modes, not in the full qwerty mode.
any way - great work. you made a great solution for the free-hebrew community
Click to expand...
Click to collapse
what do you mean?
In full qwerty it would only suggests word completion (it has nothing else to do)
cheers
eduard32 said:
Please post your skins.
Click to expand...
Click to collapse
well I only needed to change 4 files. here they are
maybe you can try using this...
u could probably rip the T9 words off of it...
Does it also support HTC Touch Diamond?
If not, where can i find the native hebrew kewboard for the Diamond?
Thanks!
dudikbs said:
u could probably rip the T9 words off of it...
Click to expand...
Click to collapse
Thanks I already have this file and unfortunately it looks very different from the HTC files. I also have another one from Sony Ericsson which looks more like that HTC ones but I couldn't get it to work.
Still haven't given up though
Nice!
Going to check it out...
dudikbs said:
u could probably rip the T9 words off of it...
Click to expand...
Click to collapse
where do i have to put this file?
has anyone tried on diamond or TP?
Installtion Failed
I've tried to run the cab in my HD but it says: "Installtion was unsuccessful. the program or setting cannot be installed because it does not have sufficient system premissions", what can i do?
HI,
I just got my Touch Pro2 today, and noticed it has UK keyboard. Question is, does someone know how to change that layout eg. norwegian (I have cab for TyTN2, but I think it's not working because Tytn2 has only 4 row keyboard).
Is there some registry keys to change, or something else?
hifi said:
HI,
I just got my Touch Pro2 today, and noticed it has UK keyboard. Question is, does someone know how to change that layout eg. norwegian (I have cab for TyTN2, but I think it's not working because Tytn2 has only 4 row keyboard).
Is there some registry keys to change, or something else?
Click to expand...
Click to collapse
Sometimes just changing your region (settings ==> system ==> regional)
changes the layout.
quarintus said:
Sometimes just changing your region (settings ==> system ==> regional)
changes the layout.
Click to expand...
Click to collapse
Not wnough, tried already. In Registry lang code was 1033, I tried 1044 but still same.
Hi,
You can add a new keyboard layout file to your device windows folder, and change a specific "KeyboardlayoutFiles" registry value to point to that new file.
I made a small cab file which adds Ä and Ö characters behind A and O buttons. Simply use FN+A and FN+O after this cab installed and soft reset done.
Note, I tested this installation file with my own TP2 and worked fine, but I'm not "Pro" with WinMo cab development so please test the package at your own risk
link to the instructions and cab file
/Tuomo
tkukkola said:
Hi,
You can add a new keyboard layout file to your device windows folder, and change a specific "KeyboardlayoutFiles" registry value to point to that new file.
I made a small cab file which adds Ä and Ö characters behind A and O buttons. Simply use FN+A and FN+O after this cab installed and soft reset done.
Note, I tested this installation file with my own TP2 and worked fine, but I'm not "Pro" with WinMo cab development so please test the package at your own risk
link to the instructions and cab file
/Tuomo
Click to expand...
Click to collapse
I actually already got those characters by editing WWE file. I discovered from other forum, that keyboard setting works little different way than in TyTNII.
HiFi - Hi - I have the same problem as you, I too live in Norway, and have been looking for Norwegian.
So far, I've found a way to get norwegian spellcheck/XT9 wordlist, from: http://forum.xda-developers.com/showpost.php?p=3304868&postcount=5
Installing it adds Norwegian to the list, it is not lister properly in the list, so after7if you choose another language, you leed to reinstall the cab to get Norwegian back.
Still - I am looking for a solution for the soft, and hard keyboard - how far are you from achieving your goal ?
For me it was enought to get ä,ö (and å) to hardware keyboard. I don't use software keyboard so much, that I need those in that. And T9 seemed to learn words quite quicly, so I can use that to get right words if for some reason I'm not using hardware keyboard.
Ok.
Anyone here knows that the HTC soft-keybaord uses for sumbol-list ?
they do not use the commonly used file sym.0409.txt , at least the HTC spacial characters appears in different order than the sym.0409.txt file.
I'd like to rearrange some of the special characters.