hi guys
i'm loking for a dual sim that works with the usim "3" ,i have just try to find some thing in ebay ,but nothing ,can any one help me please?
www.multimobile.nl
regards,..
A.
adonker said:
www.multimobile.nl
regards,..
A.
Click to expand...
Click to collapse
thank for your replay but your link is maby wrong (404 no found)
oh,...excuse me:
http://www.multi-mobile.eu/
this one should work...
a have just sent a mail asking them if that works fine for jasjar ,but any replay untile now
Got any reply?
re:
babak said:
a have just sent a mail asking them if that works fine for jasjar ,but any replay untile now
Click to expand...
Click to collapse
As per my knowledge, ther is two types of "multi sim"
1- the one that holds both of your sims into some smal circut, and there is a third sim connected to the circut, which you insert into the back of your phone, and keep the rest of the circut into the cover back.
2- there is another type, that you cut a small peice of your two sims , and re-attach it to a new SIM, and insert it into the sim hole into the phone.
the difference is if have a place in the back of your phone for the first type, use it, cause it keeps your sims in a good condition and can be used in any other phone, if you don't have a space for the circut, so you have to use the second type, but you can't use any of the sims separte, because you have already cut it.
now, the important part of that all, that you can't use both SIMs at the same time, none of the above solutions can make you online on both SIMs, because your phone of course dosn't support it, the phone is disigned to deal with one network only at the time, the above solutions only makes you to switch your phone off, then re-switch it on, to find your self on the other SIM, and you can do re-switching your phone to back to the first SIM.
hope that I was clear, and hope there is a program some day that can deal with both SIMs at the same time
mehegazy said:
As per my knowledge, ther is two types of "multi sim"
1- the one that holds both of your sims into some smal circut, and there is a third sim connected to the circut, which you insert into the back of your phone, and keep the rest of the circut into the cover back.
2- there is another type, that you cut a small peice of your two sims , and re-attach it to a new SIM, and insert it into the sim hole into the phone.
the difference is if have a place in the back of your phone for the first type, use it, cause it keeps your sims in a good condition and can be used in any other phone, if you don't have a space for the circut, so you have to use the second type, but you can't use any of the sims separte, because you have already cut it.
now, the important part of that all, that you can't use both SIMs at the same time, none of the above solutions can make you online on both SIMs, because your phone of course dosn't support it, the phone is disigned to deal with one network only at the time, the above solutions only makes you to switch your phone off, then re-switch it on, to find your self on the other SIM, and you can do re-switching your phone to back to the first SIM.
hope that I was clear, and hope there is a program some day that can deal with both SIMs at the same time
Click to expand...
Click to collapse
thank for your generous replay ,but not all of the second tipe are compatible with our device and just for this reason, i send mail to them but i don't think that their dual sim works for jasjar ,this is the reason because they dosen't replay me nothing .
Did you find a solution to your problem? i have the same problem & can't find any solution
carger1115 said:
Did you find a solution to your problem? i have the same problem & can't find any solution
Click to expand...
Click to collapse
no,unfortunately and it seems so strang than nobody is interested in it
I did sent an email and I did get a reply (in dutch )
Apparently the dual sim sollution should be usable in our universal, u cut your sim card to pieces (cut the chip out) and put it in a specialy made simcard, that fits exactly in the universal like a normal simcard would.
In a special sim menu u can choose which one of the sim cards is used, BUT they cant be used at the same time if u wanted that u have to buy a dual dim phone, which probably has two radio circuits....
Bonusbartus said:
I did sent an email and I did get a reply (in dutch )
Apparently the dual sim sollution should be usable in our universal, u cut your sim card to pieces (cut the chip out) and put it in a specialy made simcard, that fits exactly in the universal like a normal simcard would.
In a special sim menu u can choose which one of the sim cards is used, BUT they cant be used at the same time if u wanted that u have to buy a dual dim phone, which probably has two radio circuits....
Click to expand...
Click to collapse
thank for your replay, but unfortunatly if it has a menu ,it's certainly not compatible for jasjar ,just tested this kind of dualsim.
Hi,
there is a third type of multi sim, it is the SuperSIM 16 in 1.
Phisically it is just like a normal SIM, but it can contain up to 16 virtual SIMs.
see: http://www.duosim.com
You need a special SIM and a hardware reader/writer (to be connected to a usb port), then you read your original SIMs and copy them to the SuperSIM with the progam delivered in the kit.
I bought one, I can read my SIMs, but when I try to write to the SuperSIM I receive an error (write failed!)
I wrote many times to the seller via web, e-mail and normal mail, but I had no reply, so I wasted my money and I still need a dual SIM.
I don't like to cut my SIMs, I previously bought a "type 1" (as described by mehegazy) but I cannot close the SIM holder on my Qtek9000.
Bye.
Ermanno
ik1aor said:
Hi,
there is a third type of multi sim, it is the SuperSIM 16 in 1.
Phisically it is just like a normal SIM, but it can contain up to 16 virtual SIMs.
see: http://www.duosim.com
You need a special SIM and a hardware reader/writer (to be connected to a usb port), then you read your original SIMs and copy them to the SuperSIM with the progam delivered in the kit.
I bought one, I can read my SIMs, but when I try to write to the SuperSIM I receive an error (write failed!)
I wrote many times to the seller via web, e-mail and normal mail, but I had no reply, so I wasted my money and I still need a dual SIM.
I don't like to cut my SIMs, I previously bought a "type 1" (as described by mehegazy) but I cannot close the SIM holder on my Qtek9000.
Bye.
Ermanno
Click to expand...
Click to collapse
Hi,
I had exactly the same problem like you, and I started searching about.
I figured out with a lot of testing, that using the program "SuperSIM LY-600" from the link "http://www.duosim.com/download.html", totaly solved my problem, so now I have the supersim 16in1 loaded in my qtek9000 using up to 5 different numbers.
I hope that helps you.
Beware using the 16 in one sim cloning system.
Cloning your sim is in contradiction of you terms with the service provider, and can be illegal in some countries. IN brief: If yer caught yer busted!
Oh dont bother if you have a Vodafone UK sim as they use a Triple DES encryption on the card that simply will take you a year to break before you can brute force the IMSI and KA. Oh and yes I have played with this in the past.
Psi
jolas said:
Hi,
I had exactly the same problem like you, and I started searching about.
I figured out with a lot of testing, that using the program "SuperSIM LY-600" from the link "http://www.duosim.com/download.html", totaly solved my problem, so now I have the supersim 16in1 loaded in my qtek9000 using up to 5 different numbers.
I hope that helps you.
Click to expand...
Click to collapse
Hi Jolas,
I used LY-600 as you suggested and now I can write to the supersim - GREAT!
Thank you very much.
But how can I switch between my two numbers on my Qtek900?
Is there a new menu? Where?
Switching the phone on and off doesn't switch the numbers.
Thank you again.
Ermanno
ik1aor said:
Hi Jolas,
I used LY-600 as you suggested and now I can write to the supersim - GREAT!
Thank you very much.
But how can I switch between my two numbers on my Qtek900?
Is there a new menu? Where?
Switching the phone on and off doesn't switch the numbers.
Thank you again.
Ermanno
Click to expand...
Click to collapse
I'm happy this hepled you.
In the programs menu, you will find a shortcut names "STK". Just use it and you will find the menu 'switch number'.
In case you don't have the STK service, then probably you'll need a new ROM which is suppotring this service.
jolas said:
I'm happy this hepled you.
In the programs menu, you will find a shortcut names "STK". Just use it and you will find the menu 'switch number'.
In case you don't have the STK service, then probably you'll need a new ROM which is suppotring this service.
Click to expand...
Click to collapse
Hi Jolas,
you are very kind.
I cannot find an icon STK under Programs folder, maybe my ROM does not support this service, as you said.
I tested the supersim on other cellphone and it works, so the SIM seems to be OK.
I'll will further investigate.
Anyway thanks a lot !
Best wishes.
Ermanno
Does the original sim card still works after the cloning?
weenween said:
Does the original sim card still works after the cloning?
Click to expand...
Click to collapse
Yes, it does, but be aware you can't use the same time the same number through two different sims because your phone provider is going to lock your sim .
Related
Ok here’s my question,
I would like to have my PHONE password to be prompt on booting,
and not the SimCard asking the pincode
but to secure my data (& phonebill)
i would like to know if its possible
like back in the days on my NOKIA :s (yah I know)
I could select the option, on phone swapping the simcard the phone would ask for the puk code
so the card wouldn’t b usable without pin on another phone
(id rather not lose my phone but u never know right?)
Is there a way?
thx a lot,
Kartboy
From what i remember (had a 3210 and a (oh yes baby) 7110) the option was for the phone to ask for a security code when a different sim was put in it yer?
There was a security setting which if set to the highest would promt for this code whenevr the phone was powered up aswell.
The sim code option is what i use at the moment on my TyTN as i have always locked my sim card, but afaik there isnt an option for when a different sim/usim card is inserted.
yah the 7110 was a funny one .. matrix style .. had 2 of em since my first on crashed on a wall on a bad night lol
yah those are the settings i mean,
u think that if i did that setting on the nokia b4 it will still remain on the sim?
No the sim card wouldnt retain that sort of info, when you setup sim lock it retains THAT setting but not phone specific ones, there isnt much security-wise as standard in WM5-6. Perhaps look for a 3rd party solution to this??? Or if you are feeling adventurous develop your own!? (in the xda-devs spirit!)
Kartboy said:
yah the 7110 was a funny one .. matrix style ....
Click to expand...
Click to collapse
Hell yes the 7110 was a GREAT phone
I was considering this option,
since i got some clients who prefer using blackberry (i dun get why)
with the reason that,
if u fail 5times ur code @ boot the device getz erased,
which is pretty good for privacy i think,
i mean if i lose my phone
i can lock my sim with the provider easily but u dun need to activate the sim to b able to check all the info on the phone, which scarez me more
ow by the way the radio 38 any good?
installing it now
Kartboy said:
ow by the way the radio 38 any good?
installing it now
Click to expand...
Click to collapse
Seems ok yer, My 3G and GSM are both still very good (most improvment was from 1.27, the radios since have all been very good). My main reason for upgrading to 1.38.00.10 was that the GPS chip is a dead end, so i figured having a radio that isnt capable of turning it on will remove that headache if it goes wrong, and also my previous radio (1.35.00.11) was a trinity radio and the new one is a hermes radio, better all round
lol I am a retard,
clicked the wrong filename.. installed the 35.00.11 instead of the 38.00.11
will keep the forum updated bout it...
thx man
Hey guys,
I got an analogue dual sim adapter. When I start the phone with the first sim card it's ok. But as soon as I wanna switch to SIM2, it tells me, the sim card was missing. When I do a reboot instead of turning off and on the telephone module, it works. The strange is, when I do a switch from SIM2 to SIM1, there is no problem at all. Neither by restart nor by turning telefunction off and on.
I already tried to switch the sim cards manually in the adapter. No change. Always the problem by switching from SIM1 to 2.
Does anybody have a solution?
Btw. I run WM6 Touch VII. But it's the same problem with WM5.
Dual Sim
I assume that your sim is Analog? I'm not sure exactly how those work, but I had a similar problem with my Digital dual sim. It would always give a sim blocked message while trying to switch in the one direction. In the other direction it was fine. It turned out that my provider required the exact Telephone number to be the name of the Sim. When I changed the name, everything worked fine. Since it sounds like you have an analog model, I'm not sure if you can change the name, but if you can, it's worth a try.
P.S. The Digital Dual Sim really burn a lot of Battery, so I can't really recommend it.
yes. as i wrote it is analog. i can't change the names of the sim card.
Analog Sim Adapter
Which Radio Rom are you using? I would recommend 2.69.21. Since it works on a softreset and not with the Phone on off switch in ConnectionsManager, I would guess that you Radio Rom is not compatible with your SIM. Try flashing a new Radio ROM to see if that helps, if not, you can always another. If none of the radio roms work... well, try bringing back the SIM and getting a new one or something.
i updated to the newest radio rom version. And nothing changed. still "sim card missing". I suppose there's something wrong with my simcard.
Probably, but I did think of one other thing. It's kinda dumb, but maybe worth checking out: Is possibly one SIM slightly thicker than the other? If so that might be the problem. You could then try wedging paper in between to give it better contact. Otherwise, good luck with bringing it back, or exchanging it.
P.S. Have you tried it in a different Cell phone?
yes, i tried in a different one. there it works... strange.
thanks for your help anyways.
Have you tried all the radio roms? In your situation, I would flash every radio rom on the ftp just to try it out. Maybe the oldest one will help, maybe 2.47.21? Who knows? But if the card works in a different phone, then I can't see why it wouldn't work in the Prophet??? I have a Digital Dual Sim, and that works fine, but drains the battery
Stuclint said:
I assume that your sim is Analog? I'm not sure exactly how those work, but I had a similar problem with my Digital dual sim. It would always give a sim blocked message while trying to switch in the one direction. In the other direction it was fine. It turned out that my provider required the exact Telephone number to be the name of the Sim. When I changed the name, everything worked fine. Since it sounds like you have an analog model, I'm not sure if you can change the name, but if you can, it's worth a try.
P.S. The Digital Dual Sim really burn a lot of Battery, so I can't really recommend it.
Click to expand...
Click to collapse
Hmm, interesting, I have a simmilar problem on my wizard. But it happens only with one particular pair of cards, other works flawleslly.
On my device it doesnt show the message, it even looks like it logs to the network correctly, but its imposible to make call, access Sim card or any phone options. It looks like the phone module hanged, and only solution is a soft-reset.
I didnt even thinked that the SIM card names have anything todo with that. Can you tell me in what format you put the number? I mean, did you put the country code in front of it (like eg. 44 or +44).
I have already tried to put the number, but still no success.
Also I have looked through many ROM's (more than 10) and tried almost all available radio's and always the same, no success.
PS About battery drain, i own a 15gen. dual sim card and it have exactly same power consumption as used without it. So seek for a new DualSim, they dont have increased drain.
I have recently purchased ACER DX900. As it supports 2 sims together, the default dialer has 2 call buttons : 'talk1' and 'talk2' enabling user to decide from which sim to make the call. As usual the default dialer is with small buttons. Is there any custom dialer available that supports 2 sims talk buttons or can any kind developer make a new one please.
Thanks in advance
having the same problem
Hi all,
I have the same problem with my Acer DX900. It would be nice to have a small tool running in the background that asks you what SIM to use after you pressed the "call-button".
For example, if you call a contact within SPB Mobile Shell, there is no way to select SIM1 or SIM2.
It would be great if someone has a clever solution.
Thank you in advance.
Martin
I'm actually going to have a dual sim for the first time in the end of this month. If its registry-based (and will probably be) I'll do a Flash app or a WM6.5 plugin to toogle cards.
twolf said:
I'm actually going to have a dual sim for the first time in the end of this month. If its registry-based (and will probably be) I'll do a Flash app or a WM6.5 plugin to toogle cards.
Click to expand...
Click to collapse
as of now, there is no wm6.5 rom for dx900. hopefully you can make one
as for the dialer i am not sure if it's registry based, but the sms sending definitely is. i've already mase a simple switcher for it.
oh i didnt knew it could be so compartmentalized, i thought that one HAD to be inactive so that the other could run....
twolf said:
I'm actually going to have a dual sim for the first time in the end of this month. If its registry-based (and will probably be) I'll do a Flash app or a WM6.5 plugin to toogle cards.
Click to expand...
Click to collapse
Dear tWolf
how 's the progress? Did you get Dx900?
Sorry, I completly forgot about this... I wanted to use my ISP offer to have a 3G connection with free slow internet, but I ended up changing to another operator where I have free limited internet.
twolf said:
Sorry, I completly forgot about this... I wanted to use my ISP offer to have a 3G connection with free slow internet, but I ended up changing to another operator where I have free limited internet.
Click to expand...
Click to collapse
That means no more dialer for dual sim dx900.
So sad..
Any news about it?
i dialer for Acer dx900
can someone of the tech masters on this site tell me how I can have large dial pad on my Acer dx900. you know idialer will 2 sim selection ? please
not many help
got this device (DX900) from 2 days, but i must admit, suport for this is poor like hell. From 2 yeras I have also Kaiser and every 4-5 months my phone changed drasticly because of ROM cookers. Unfortunately I had enough to take my 2 phones everytime and uodate them both, so thats why dual sim is better even without so many features like on Kaiser
I want a big dialer too can anyone make this happen please ?
Any solution?
standard telephone dialer and dual SIM dialer
Can you please tell me where to find information about Android standard telephone dialer? Where is this software and function? I assume this is part of the telephone manager?
Can you please tell me the technique and software to make dual SIM work? Where can I find info?
Thank you.
Hi! I would like to have your recommendations about the best dual SIM card and software for using in the HTC Touch HD. One card would be for voice and the other for data (so it needs to be 3G/HSDPA compatible), or two cards from different operators.
I have used the search button, but the answer still eludes me...
One option seems to be the "New Power on off standard dual sim" from freeyourmobile - any experience?
Also, I have read that an analog model is preferable to a digital one - is it true?
Is the SIMTodayCab software, from Pelargonium, compatible with this phone?
Thank you all for your help!!
Best regards,
Rui
rmcsilva said:
Hi! I would like to have your recommendations about the best dual SIM card and software for using in the HTC Touch HD. One card would be for voice and the other for data (so it needs to be 3G/HSDPA compatible), or two cards from different operators.
I have used the search button, but the answer still eludes me...
One option seems to be the "New Power on off standard dual sim" from freeyourmobile - any experience?
Also, I have read that an analog model is preferable to a digital one - is it true?
Is the SIMTodayCab software, from Pelargonium, compatible with this phone?
Thank you all for your help!!
Best regards,
Rui
Click to expand...
Click to collapse
the one in my signature works great and without any problems.
you can find it on ebay. it's about €40.
bgumble said:
the one in my signature works great and without any problems.
you can find it on ebay. it's about €40.
Click to expand...
Click to collapse
do you have to power cycle the phone to change numbers? can you receive calls from either SIM without power cycling the phone? or is there software you use on your phone to manage calls?
You should look/post in the accessories section for questions about dual sim.
cortez.i said:
do you have to power cycle the phone to change numbers? can you receive calls from either SIM without power cycling the phone? or is there software you use on your phone to manage calls?
Click to expand...
Click to collapse
you have a new program automatically installed, that allowes you to switch between the two simcards (lasts 20-30 secs). that's it. you are not able to receive calls from both sims at same time etc..
Recieving sms and calls on both card doesnt work with Dual-Sim-Cards.
You need a phone wich supports dual sim (has 2 slots) to do this.
The Problem is that HD and other phones wich are not made for, just have one chip and antenna so you just can be logged in at 1 GSM provider (with one sim) the same time.
Dual Sim Cards just change betwen the cards as you would do (opening it and change the card inserted). Only advantage is - you can switch betwen the sims by software and dont have to open your phone,...
greetings
Thank you for your help!
I have also read that Dual SIM cards often have "trouble" managing 3G cards. Any experience?
Regards,
Rui
rmcsilva said:
Thank you for your help!
I have also read that Dual SIM cards often have "trouble" managing 3G cards. Any experience?
Regards,
Rui
Click to expand...
Click to collapse
not the one I'm talking about!
I have HYPERCARD-3G (look here) and it works perfectly, both with the calls, as with sms or videocall.
Of course work a sim (number) at a time and activated with a simple click, without turning off the phone (it takes about 20 seconds to switch the sim).
Thanks again! Most helpful!
hi giuys like the header says i would like to sim lock my phone... what i mean is that i want my phone to work only with my sim... i've tried to search on the forum for it but with no results... can you help me???
thanks in advance
hi. first of all, if your phone is sim locked, it not gonna work only with your sim but with every sim card of your network ( vodafone in your case); secondly i've never heard about something or somehow to sim-lock again a phone!!! ask Olinex, may be he knows!!! good luck
i didn't mean the general sim-lock like the branded phones have i mean maybe a lite app that runs when you start the phone and blocks you from using the phone if there is no sim or it isn'tt the sim you've previously registered...
aahhh okayyyy, you mean something like the nokia's phone locking if the sim is changed! i've understood now! i was looking for it me too but i've never found a bit! we'll stay in touch, if i find something intresting i'll tell you ciao
crashnarcis said:
i didn't mean the general sim-lock like the branded phones have i mean maybe a lite app that runs when you start the phone and blocks you from using the phone if there is no sim or it isn'tt the sim you've previously registered...
Click to expand...
Click to collapse
I got what you need but it is shareware [you have to pay for it].
It is for Wm 5 but i think that it will support higher too.
Did you search on google?
Here is the link: [click].
I searched for the "cra**ed" version but all links are dead or fake.
hi thanks for the reply guys
if you can use password protection why bother such thing!!!
okay, password may be broken by software, but same thing for any kind of security also.
anyway, a program can be written such as:
small memory residence program which will check the sim nr. in every few min.
if not matched, will enter into Airport Mode + screen lock
keep checking every few min.
if it matched the nr. stored before (encrypted) will unlock airport mode+screen
or the program will only trigger at the stratup or sim change