Related
Hi Forum,
I got a dash with the WM 6.1 from this great forum.
Somehow since yesterday the screen turned completely white
There was no physical impact on the phone what so ever...
When I turn the phone on, the screen is all the time white... but the phone is still working since the alarm is still ringing....
I've tried already the following:
- took the battery out for over 6 hours and tried again
- with and without sim/sd card
- to reset the phone but with no success since I cant see anything (2 softbuttons, powerbutton etc.)
- putting WM 6.5 with no success with the Error 270
- pressing and holding any button
- tipping the jagger for 3 times
- and finally hitting the phone
All these steps didnt use me anything...
I'd be gratefull for any sudgestions
Maybe the screen is just damaged and its not because of the software...
thanks a lot,
RedDot69
Hard-reset will be best option and can be done blind since it's button sequence as known then green key, i knopw that peeps have done it blind and with you spending enough time it will be sorted... The other option is bootloader and flash your stock ROM as won't get an error 270
thanks for the fast reply.
ok about the hard reset.
I hold both buttons beside green and red button then while holding i turn on the phone (power button more then 3 sec.) after it turned on i let go of the buttons and press the green button (I pressed it a several times). What after that?? will everything happen automatically??
if yes then the hard reset wont help since its still white...
unfortunately I dont have the original ROM anymore (WM5).
Do you know where I can get it??
Ok I guess I managed to hard reset this thing.
Unfortunately with no success
can anyone help?
will the problem be gone if I change the display?
RedDot69 said:
Ok I guess I managed to hard reset this thing.
Unfortunately with no success
can anyone help?
will the problem be gone if I change the display?
Click to expand...
Click to collapse
Can you sync with your PC? That's something that you haven't state in your original post.
From what you have posted in the first post, looks to me like your phone has suffered water/moisture damage. Classic white screen, nothing shows, display turns off after default timeout seconds, phone functions smoothly. For this to occur, you dont have to dunk the phone in water, phone in pocket when exposed to light rain, snow will do it.
If this is the case, the first thing you can do to salvage the phone is to remove the battery, otherwise the charge will short circuit more, leading to irreparable damage.
Second thing, try and keep it open for 24 hours or more and try ONCE more, just once, if the moisture has been evaporated. If not, remove battery again.
Next you will need to find a service center where they will dismantle the phone and physically air dry the PCB, and hopefully if it hasnt already shorted, it will come back to life.
The cost for this could vary from minimal to astronomical, depending upon which country you are in.
Do not take my words for granted, do a google for phone water damage, find out if those are your exact symptoms.
All the best.
gmaniac2008 said:
Can you sync with your PC? That's something that you haven't state in your original post.
Click to expand...
Click to collapse
yes I can. I already saved the contact list The phone is perfectly working beside the white display...
@ ccpraveen
I really dont think thats the case. Since I was sleeping on the couch, the phone's alarm went of like at 11 and it was all ok, then 30 min later the screen was all white
And the night before I left the phone at home...
Bringing the phone to some service center is out of question, since I live in Germany... If possible, I'd have to repair it my self...
By the way the Display time out works too... Somehow I got the feeling that it wouldnt use me anything to change the display
please, can no one help
RedDot69 said:
please, can no one help
Click to expand...
Click to collapse
install this on your computer http://www.mymobiler.com/
it will silently install on your s620 when it syncs with activesync and you will be able to view your screen from your computer monitor
if everything works buy a new lcd from ebay and replace it because its probably broken
--- sorry didnt want to post ---
Please skip this reply and read the next (cant delete this anymore)
ducamie said:
install this on your computer http://www.mymobiler.com/
it will silently install on your s620 when it syncs with activesync and you will be able to view your screen from your computer monitor
if everything works buy a new lcd from ebay and replace it because its probably broken
Click to expand...
Click to collapse
thanks a lot for the very usefull link
I installed the programm and I can see my display on my monitor
Then I hard reseted the phone
Installed WM6.5 from the forum successfully
But the display is still all white
If anybody thinks that the problems any way not from the display please do tell.
RedDot69 said:
thanks a lot for the very usefull link
I installed the programm and I can see my display on my monitor
Then I hard reseted the phone
Installed WM6.5 from the forum successfully
But the display is still all white
If anybody thinks that the problems any way not from the display please do tell.
Click to expand...
Click to collapse
My impression is that you have a hardware problem, maybe your screen has something loose. If you state that you will fix it by yourself, you can read the sticky on how to take apart your dash.
There are also power management settings that will turn the display white, however if it is white all the time, then it's probably hardware. Loose connections does sound possible. I'd check that first
You can try the following:
*- COMPLETELY disassemble your phone.
*- Take the PCBs apart on a table or something.
Then... take an hairdryer!!!
You have to dry your PCBs: take a PCB in your hand and do the work.
Be aware of not using TOO HOT air, or you'll melt all.
If it doesn't work, try to dry your LCD.
Doesn't work?
Okay, then the only 2 possible fixes are:
*- Replace the LCD Flex Cable if not integrated in the LCD.
*- Replace the LCD.
Hope that you'll get your phone fixed and running
No bootloader / and I can hard reset too...The screem stay black and when I push the power "on", the phone vibrate and that all nothing appear on the screem.( after flashing it with a custom rom).....
Mogreen said:
No bootloader / and I can hard reset too...The screem stay black and when I push the power "on", the phone vibrate and that all nothing appear on the screem.( after flashing it with a custom rom).....
Click to expand...
Click to collapse
which rom did you try to flash on it?
if you plug it into the PC does the PC load (or try to load) some USB drivers for the phone? (not activesync)
cmonex said:
which rom did you try to flash on it?
if you plug it into the PC does the PC load (or try to load) some USB drivers for the phone? (not activesync)
Click to expand...
Click to collapse
The Rom was coming from "HTCPEDIA.com"!!!!! And it's not the first time I flashing a rom. But it 's the first time I have the kine of issue.
I going to test your solution let you know.
Thanks
Mogreen said:
The Rom was coming from "HTCPEDIA.com"!!!!! And it's not the first time I flashing a rom. But it 's the first time I have the kine of issue.
I going to test your solution let you know.
Thanks
Click to expand...
Click to collapse
that's not a solution just one step towards a possible one
Ok, thank! But I was looking for az USb driver for a phone on the web but I can fine a propely one for my phone HTC TOUCH Pro 2; so if yu have a clu for that it will be nice for me to pass this step. ;-)
cmonex said:
that's not a solution just one step towards a possible one
Click to expand...
Click to collapse
Ok, thank! But I was looking for az USb driver for a phone on the web but I can fine a propely one for my phone HTC TOUCH Pro 2; so if yu have a clu for that it will be nice for me to pass this step. ;-)
Mogreen said:
Ok, thank! But I was looking for az USb driver for a phone on the web but I can fine a propely one for my phone HTC TOUCH Pro 2; so if yu have a clu for that it will be nice for me to pass this step. ;-)
Click to expand...
Click to collapse
so the PC does see something when you plug the phone in? verify please
same problem here..
I've the same issue, only difference is that it occurred after disassembling and putting everything back in place again. It does start, because I can here the booting sound.
It stayed blank even after performing a hard reset. (did it blind folded)
Any solutions?!
cmonex said:
so the PC does see something when you plug the phone in? verify please
Click to expand...
Click to collapse
Yep!! It doesn't see no thing at all!! I have only the green light when I plug it on my PC same on supply power!! And when I start the phone with the power button I can fill it vibrate but no song come in from it like "booting song" and after vibrate nothing appear on the screen....
Mogreen said:
Yep!! It doesn't see no thing at all!! I have only the green light when I plug it on my PC same on supply power!! And when I start the phone with the power button I can fill it vibrate but no song come in from it like "booting song" and after vibrate nothing appear on the screen....
Click to expand...
Click to collapse
sorry, then it's really dead, i.e. either the hardware is totally broken or in the best case you need JTAG to fix it. no software based solution possible at this point
cmonex said:
sorry, then it's really dead, i.e. either the hardware is totally broken or in the best case you need JTAG to fix it. no software based solution possible at this point
Click to expand...
Click to collapse
Yep!!It was what I was thinking in first time......snif!!!
I already by a jtag tools so i m going to play with it to see what's going on.
In case I have got my WP7 HTC Mozart but I reallly like my TP2....
Thank for your help brov.
kind regard
Mogreen said:
Yep!!It was what I was thinking in first time......snif!!!
I already by a jtag tools so i m going to play with it to see what's going on.
In case I have got my WP7 HTC Mozart but I reallly like my TP2....
Thank for your help brov.
kind regard
Click to expand...
Click to collapse
By the way do you know where me can find a good Tuto to jtag properly my TP2.
Thank
I've searched all the keywords I can think of to no avail.
I just bought a T899. It powers on and I can hear the "drip" noises when I touch the screen. The LCD does not light up nor do the soft keys. I was able to boot into recovery and root through Odin3 to "cwm6-root-note2." Odin3 said successful. I've looked for a remote viewing app to try to "see" what is going on onscreen. The ones I've found must be installed on the phone before use.
Are there any apps that can be pushed to my phone number or through USB to this phone that can help me troubleshoot this problem? Or am I just looking at a new LCD? I've taken it apart and everything looks connected inside. It will ring and take calls, just no LCD or soft key lights.
I got it dirt cheap so a replacement LCD will let me still make some money reselling this, but I want to exhaust all options before I go that route.
I'm looking for either a known problem with these or a way to remotely view the screen to flash a new rom to see if that's the problem. I'm new to this phone but have flashed and rooted several other models of Samsung phones.
Thank you for reading...
MoggyTheCat said:
I've searched all the keywords I can think of to no avail.
I just bought a T899. It powers on and I can hear the "drip" noises when I touch the screen. The LCD does not light up nor do the soft keys. I was able to boot into recovery and root through Odin3 to "cwm6-root-note2." Odin3 said successful. I've looked for a remote viewing app to try to "see" what is going on onscreen. The ones I've found must be installed on the phone before use.
...
Click to expand...
Click to collapse
the best way is to pull the battery out and reinsert it and try home button, volume down and power (download mode). if you can see something on screen the lcd is ok. if lcd ok, try to flash another rom
nickmatine said:
the best way is to pull the battery out and reinsert it and try home button, volume down and power (download mode). if you can see something on screen the lcd is ok. if lcd ok, try to flash another rom
Click to expand...
Click to collapse
I was lucky to get download mode with no screen. I did flash CMW and connected to Odin. I'm guessing I'll just need to get a new LCD. I was hoping I could troubleshoot with Odin or push a remote screen view app onto the phone. I was hoping for a cheaper fix. I'll just order the new LCD I guess.
MoggyTheCat said:
I was lucky to get download mode with no screen. I did flash CMW and connected to Odin. I'm guessing I'll just need to get a new LCD. I was hoping I could troubleshoot with Odin or push a remote screen view app onto the phone. I was hoping for a cheaper fix. I'll just order the new LCD I guess.
Click to expand...
Click to collapse
android screencast http://code.google.com/p/androidscreencast/ ..view your phones screen on your pc
deeznutz1977 said:
android screencast ..view your phones screen on your pc
Click to expand...
Click to collapse
Thanks, I think that's exactly what I'm looking for. I'll give it a try tonight and report back.
I have the new Galaxy Note 2014 edition tablet, as does my son. My son came home today with his tablet and told me the screen no longer turns on. He said he was playing a game with a friend when the screen flickered and then went dark. Nothing seems to bring it back online.
Tried to press the power button and volume up button for a forced reboot. Most times does not but it did reboot once and stayed black.
Also tried pressing the power button down while pressing a finger on the screen, apparently a solution to sleep of death or something. I can't tell if that does anything - if anything it seems to turn it off or something because it has become unresponsive after doing that.
Any thoughts on what to do next?
Gamul1 said:
I have the new Galaxy Note 2014 edition tablet, as does my son. My son came home today with his tablet and told me the screen no longer turns on. He said he was playing a game with a friend when the screen flickered and then went dark. Nothing seems to bring it back online.
Tried to press the power button and volume up button for a forced reboot. Most times does not but it did reboot once and stayed black.
Also tried pressing the power button down while pressing a finger on the screen, apparently a solution to sleep of death or something. I can't tell if that does anything - if anything it seems to turn it off or something because it has become unresponsive after doing that.
Any thoughts on what to do next?
Click to expand...
Click to collapse
I seem to be able to get it into two states right now, but neither is like it was - powered on and "working" but no screen. If I hold the power button for a while it seems ot go into a deep state of sleep or off, but I do not quite think it is off. If I hold it again for 30 seconds nothing happens at all. If I hold it again for 4 seconds, the back and menu soft keys will light up again. And then I can get them to light by hitting the home button or a quick touch of the power button.
Press and hold power in either state while holding volume up no longer seems to take me to a reboot - I no longer hear the power up music.
No idea what state it really is in or how to get it out of this.
ok - I think when it is able to light the buttons - it actually is still on. I just heard the vibration notification of an incoming alert (email, twitter or something).
Gamul1 said:
ok - I think when it is able to light the buttons - it actually is still on. I just heard the vibration notification of an incoming alert (email, twitter or something).
Click to expand...
Click to collapse
Have you tried connecting it to your charger for 15 min or so to see if anything changes.
Are you rooted?
kkretch said:
Have you tried connecting it to your charger for 15 min or so to see if anything changes.
Are you rooted?
Click to expand...
Click to collapse
I have had it plugged in for a couple hours now and no change. I am not rooted. It is completely stock except the apps installed.
Thanks!
Sounds like a hardware fault. Take it back under warranty.
Sent from my SM-N9005 using Tapatalk
dr.m0x said:
Sounds like a hardware fault. Take it back under warranty.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
+1
dr.m0x said:
Sounds like a hardware fault. Take it back under warranty.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Yeah - I am thinking you are right. Not sure if I can just send it back as I bought it on Amazon. Would Samsung repair service be a valid option?
Gamul1 said:
Yeah - I am thinking you are right. Not sure if I can just send it back as I bought it on Amazon. Would Samsung repair service be a valid option?
Click to expand...
Click to collapse
Use the function to chat with the amazon support.
just google "Amazon Support". You will find the option on the right side on the amazon page
They will know what to do and from my experience amazon will offer you that you can send your tablet either to amazon or directly to samsung and they wil pay the shipping costs good luck !
Gesendet von meinem SM-P600 mit Tapatalk
Gamul1 said:
Yeah - I am thinking you are right. Not sure if I can just send it back as I bought it on Amazon. Would Samsung repair service be a valid option?
Click to expand...
Click to collapse
If you are within your refund stage then get it exchanged for a brand new device if not then yeah you will be covered under warrenty.
Its a problem with your tablet. I know of a few other people in other threads who have also experienced this. My experience was different though because mine didn't turn on out of the box. I think there's a problem with Samsung's display connector. Your best bet is to just get it replaced at this point.
Sent from my SM-P600 using Tapatalk
notebooko said:
Its a problem with your tablet. I know of a few other people in other threads who have also experienced this. My experience was different though because mine didn't turn on out of the box. I think there's a problem with Samsung's display connector. Your best bet is to just get it replaced at this point.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Yeah - it looks like that. I was hoping for a service option because my son has a lot of homework on it that would be nice to retrieve and of course he is bummed that he might lose all his game stats. I tried ot hook the device up to the pc to see if I could copy some files but although the device shows, its internal drives do not show up.
I really do not know what state the device is in right now. The soft buttons light up and if i pull the smart pen out it vibrates as it acknowledges it has been taken out, and I can hear the occasional vibration notification as an email, twitter update, or some other notification comes in. So - it "seems" like it is on. But I can not get it to do a forced boot and a few other things seem not quite right.
Anyway - Thanks for the help everyone!
Gamul1 said:
Yeah - it looks like that. I was hoping for a service option because my son has a lot of homework on it that would be nice to retrieve and of course he is bummed that he might lose all his game stats. I tried ot hook the device up to the pc to see if I could copy some files but although the device shows, its internal drives do not show up.
I really do not know what state the device is in right now. The soft buttons light up and if i pull the smart pen out it vibrates as it acknowledges it has been taken out, and I can hear the occasional vibration notification as an email, twitter update, or some other notification comes in. So - it "seems" like it is on. But I can not get it to do a forced boot and a few other things seem not quite right.
Anyway - Thanks for the help everyone!
Click to expand...
Click to collapse
That's strange that you can't see the drives when connected to the computer. If you look really closely though it could just be the backlight not turning on when the actual lcd is turning on. If you really need to see whats on the screen and try to find a way to send the files to yourself or upload them somewhere you can try taking a screenshot while the tablet is connected to the computer and check the screenshots folder to see what is on the screen at a certain time. I know it could take a while, but if what's on the tablet is really important it could work. Best of luck.
notebooko said:
That's strange that you can't see the drives when connected to the computer. If you look really closely though it could just be the backlight not turning on when the actual lcd is turning on. If you really need to see whats on the screen and try to find a way to send the files to yourself or upload them somewhere you can try taking a screenshot while the tablet is connected to the computer and check the screenshots folder to see what is on the screen at a certain time. I know it could take a while, but if what's on the tablet is really important it could work. Best of luck.
Click to expand...
Click to collapse
I tried to see if there was anything vaguely showing but the screen is totally black as far as I can see. I have a service ticket open with Samsung and will send it back for repairs. I would prefer repair over replacement as I would hate to lose all the stuff installed. I generally trust repairs as my philosophy is that they tend to pay better attention on the repair than the assembly line.
Thanks for all the help everyone!
You should definitely try getting it repaired or see if it's possible to copy the data to an external storage prior to getting a new one.
As a general rule I always have Google Drive take automatic backups and store what I can on my external SD to prevent any loss of important work.
Sent from my SM-P600 using XDA Premium HD app
notebooko said:
That's strange that you can't see the drives when connected to the computer.
Click to expand...
Click to collapse
Don't you have to unlock the device for the drives to show up on the PC? It's probably waiting for the lock screen to be cleared.
Gamul1 said:
I have the new Galaxy Note 2014 edition tablet, as does my son. My son came home today with his tablet and told me the screen no longer turns on. He said he was playing a game with a friend when the screen flickered and then went dark. Nothing seems to bring it back online.
Tried to press the power button and volume up button for a forced reboot. Most times does not but it did reboot once and stayed black.
Also tried pressing the power button down while pressing a finger on the screen, apparently a solution to sleep of death or something. I can't tell if that does anything - if anything it seems to turn it off or something because it has become unresponsive after doing that.
Any thoughts on what to do next?
Click to expand...
Click to collapse
The same thing happened to my Note 2014 and returned for a replacement as there is no other way around this.
Bulbous said:
Don't you have to unlock the device for the drives to show up on the PC? It's probably waiting for the lock screen to be cleared.
Click to expand...
Click to collapse
This is what I am thinking - that it is sitting at the lock screen. I tried to see if I could unlock it by touching the screen in the right places but I guess when the screen is dark its not just dark but not functional. I figured as much but thought I would try anyway.
sheepybach said:
The same thing happened to my Note 2014 and returned for a replacement as there is no other way around this.
Click to expand...
Click to collapse
Well - its going back this morning for either repair or replacement. I would prefer repair to save the apps and data and work. Nothing irreplaceable but its a royal pain to reset all this up and my son had significant game experience on the device that might be nice to save.
Either way - it will just be nice to get it working.
Just wanted to follow up with the results. Got notification from Samsung yesterday that they repaired my device and it is on its way back. They replaced the LCD screen and the battery. All free and in warranty and coming back 2 day air.
Not sure why they replaced the battery. I wonder if the battery takes a beating because of 1 game that we play - Bloons TD5. It tends to drain the battery from full to empty in about 30 - 45 minutes. Any other game or function we do the battery last many hours. I wonder if that damages the battery long term?
Hi everyone,
I'm experiencing pretty silly situation with my phone.
So the story begins here:
I was surfing the web while listening to music in the bus when suddenly my oneplus3 randomly turned off and I couldn't turn it back on. (I was on something around 15% on battery so it's not a low battery problem) I tried to turn it on several times and after holding the power button for like 10secs it turned on, and after pressing the power button again (because I needed to get past unlocked bootloader screen and dm-verity) I saw a boot screen. The capacitive button leds turned on and after 3 secs it turned off again, so I started worrying... After a while I tried to access the recovery, but no luck at all. It powers it self off after bootscreen. So I started to research. Tried to flash the entire OS, partritions with msmdownload tool. After several unsuccessful flashes (firehosewritedata failed sometimes while writing userimg or system.img or boot.img) I did get the download complete green text message, and after successful flash, the white LED turned on, even the phone was not plugged in USB or charger and turned off. The screen is completely black and the white led just flashes constantly without blinking or anything. I could only turn the led off by pressing the power button for another 10 secs. And after turning the phone off, problem still remains. After oneplus logo phone shuts down...
I can access bootloader.
And after flashing everything should be on stock, because now I only got screen only about bootloader, no dm-verity..
And of course - I still cannot access the recovery.
p.s. I tried to do the power cycle (as the tech support told me) but still no luck at all.
did u tried the full msmdownload tool (1gb) or the 55mb version ?
Mukthar. said:
did u tried the full msmdownload tool (1gb) or the 55mb version ?
Click to expand...
Click to collapse
1GB version
djemm1996 said:
1GB version
Click to expand...
Click to collapse
Are you sure that you did it right? Did your phone show up as mentioned in the instructions?
Puddi_Puddin said:
Are you sure that you did it right? Did your phone show up as mentioned in the instructions?
Click to expand...
Click to collapse
Of course. Everything is done right. I also get that green "download complete" message.
p.s I also opened the phone. water indicators are fine and no major defects what can i see by eye... All connectors are good as well.
Puddi_Puddin said:
Are you sure that you did it right? Did your phone show up as mentioned in the instructions?
Click to expand...
Click to collapse
And yes, phone was connected right. :good: installed drivers with test mode on Win10 and got Snapdragon device in COM devices. As well the MsmDownload tool shows up my device in port #20
Any ideas?
djemm1996 said:
Any ideas?
Click to expand...
Click to collapse
Follow method 2 from the Hard Brick guide by Naman Bhalla and try two or three times.
Sometimes it takes more than once for restoration.
Since you opened the phone, i think your warranty is gone now.
If the msmdownloadtool didnt help you, there is nothing you can do i think.
try to flash again, and if it still maybe something short inside.
if you have disassembly your phone, try disconnecting various flex cable like camera, sim slot etc that connect to the mainboard, that doesn't prevent device from powered on, then try to turning it on.
if it still, check your mainboard, if you don't know how, send it back.
AcidNoteZ said:
Since you opened the phone, i think your warranty is gone now.
If the msmdownloadtool didnt help you, there is nothing you can do i think.
Click to expand...
Click to collapse
Is ir really gone? There is a still warranty void sticker on the screw there, but of course it's possible to see by eye that the phone has been opened.
I have an appointment with Level2 tech support @oneplus, they are going to remotely flash the entire OS, but do you think they are using pretty similar technique as the msmdownloadtool?
djemm1996 said:
Is ir really gone? There is a still warranty void sticker on the screw there, but of course it's possible to see by eye that the phone has been opened.
I have an appointment with Level2 tech support @oneplus, they are going to remotely flash the entire OS, but do you think they are using pretty similar technique as the msmdownloadtool?
Click to expand...
Click to collapse
They are doing the same thing like you did.
I already had a session since i thought they are going to do something "special"
You can try the remote session but im afraid that wont help you if you already did it multiple times.
What about battery? Charged?
drmuruga said:
What about battery? Charged?
Click to expand...
Click to collapse
Yes battery is charged of course. It's just doint the same thing. Turns on, after a while when bootscreen comes it just turns off and white notification led appears, after that nothing.
I tried to flash it with tool using method 2 for like 15 times with "download complete" messages, but still no luck at all. Tried to erase partritions with fastboot, flashing just only recovery, modded recovery etc. but I still cannot access the recovery nor system. I just don't get it why the phone does not boot into recovery if I flash it or boot it straight away, It just only turns off and that's it. nothing more. Only black screen and white led lighting all the time (after a while the phone turns warm).
I have read all the MsmDownloadTool thread in "Mega Unbrick thread" and saw that few people have experienced the very same situation as me, so I was wondering if there is any fix for this? It's so strange that I was just surfing the Web and it just turned off by it self with like static image for miliseconds and after that just black screen.
There should be any fix. I guess that it's just a partition error...
Ok, not good news. I had a little remote session before a while. They says it's already a hardware problem.
AcidNoteZ said:
Since you opened the phone, i think your warranty is gone now.
If the msmdownloadtool didnt help you, there is nothing you can do i think.
Click to expand...
Click to collapse
Pfffft you think manufacturers notice when you take apart phones? Hell I took apart my Xperia Z2 because it was having problems and then glued it back together with cyanoacrylate hahahaha (worst thing to do but wtv) and no one noticed though it was seemless and everything looked perfect
Guys, I've got something for you! Not really the same thing as Naman.
p.s. not saying its original hehehehe keep safe
man i got a very similiar problem but my op3 has a black screen i was also on low battery around 5-15% when my phone went off after i was in twrp
Actually I was on twrp too! Also I have recently noticed that recovery loading speed was far too long than normal one. I'm talking for something about 5-7 minutes after reboot into twrp. So, who knows what did happen. Just made an RMA request. Will see how it goes.
Anyway, I was on stock 7.1.1 and it's just rooted with custom recovery and that's it! Nothing more! Is that just a factory failure or maybe it's caused by drops i have had? Nothing serious for a 4-5 times for a half year. Of course I have used it even in winter when the snowflakes are coming down from the sky and little rain. Btw, these liquid indicators are white, so all safe. ::laugh:
A
makadama said:
man i got a very similiar problem but my op3 has a black screen i was also on low battery around 5-15% when my phone went off after i was in twrp
Click to expand...
Click to collapse