Related
So I upgraded to the ATT rom and radio stack to do a comparison from the T-mobile rom and 6.24.01 radio stack.
Impressions are that the ATT rom/radio are as good if not better than my older rom/radio although with the ATT rom i now seem to be always roaming on the cingular network rather than the t-mobile network ???
verified this by reverting to the t-mobile rom (left the att radio stack) and low-and-behold the phone reports that i have a t-mobile signal once again.
is this a problem or nothing to worry about ...
thanks
There is no problem at all. i called t-mobile to ask about this roaming signal thing, and they told me that it is perfecty allright and they will not bill anything extra.
here is something else i found out - T-mobile and Cingular have a agreement, in places where t-Mo does not have their own setup - Cingular is used - so infact even when it says T-Mobile you are actually on the Congular network, it is just the T-MO customized ROM which says that you are on T-MO.
so relax and enjoy a better ROM
lethaleagles is correct. Just before T-Mobile came into the SF Bay Area/and perhaps most of CA, it was announced that T-Mo has signed an agreement with Cingular to lease their lines; however, if I also recall, the data technology is all T-Mo's.
The software of the T-Mo Radio Stack replaces the reporting of the IMEI's current network being Cingular to T-Mobile.
how?
Hi, can I know how you guy upgrade from 4.01 to 30.09? I'm currently stuck at 4.01 with Bootloader 5.17 I only have 128mb MMC Card and Xda Cradle.
So the method I used was the tried and trusted SD flashing method.
I extracted the nbf file from the ATT .exe and burnt it to a 128mb SD card reset the device and accepted the prompt to flash from SD.
Once the ROM was loaded and looked ok I reset the partnership and re-sync'd contacts and calendar, loaded my custom ring tones and theme.
I then copied the radio upgrade files over to the PPC and ran rsupgrade.
Went without hitch and I am very pleased with the end result.
Oh obviously I backed up my data before embarking on this path.
Update the RS
I keep getting the message saying it cannot find the RSugrade file. Can anyone tell me what files and where should I put in the PPC?
Thanks!
Have you guys tried to get a GPRS connection after the upgrade?
If so did it work and is it still working? (somethings tells me its a T-Mobile issue but I thought I ask).
Also can somebody post their Device Information with this new ROM/ radio stack, I'm most interested in what your Protocol version has been changed to!
Re: Update the RS
georgeli said:
I keep getting the message saying it cannot find the RSugrade file. Can anyone tell me what files and where should I put in the PPC?
Thanks!
Click to expand...
Click to collapse
You need the below files and you put them in your devices windows root folder:
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUpgrade.exe
HTH
qman,
yes i got gprs to work after the upgrade - i had to manually create the connections, making sure they were NOT setup to use the ATT proxy. they worked pefectly yesterday, but i just tried them today and no joy :twisted: i am putting this down to flakey t-mobile gprs service and will try again later today.
Device Information output:
ROM version: A.30.09 ENG
ROM date: 01/01/04
Radio Version: A.33.02
Protocol Version: 1.3.3
Hi Q - catch up w/me on MSN Messenger...I have protocol 324e4 as well. GPRS seems to be slow on the ATT Network (I also have an ATT SIM). With 4.01.00 and my T-Mo SIM connection was faster - although both attempts are with only the 6.24.01 RS.
Right-on Rey and thanks! :wink:
I upgraded my t-mobile xda last night, I didn't however upgrade the radio stack. This is working very well for me. I'm using the 6.24.01 RUU and the latest AT&T Rom. Those of you who are waiting this is the way to do it as you can then always go back to a t-mobile rom.
graemeposkitt said:
Qman,
yes i got GPRS to work after the upgrade - i had to manually create the connections, making sure they were NOT setup to use the ATT proxy. they worked perfectly yesterday, but i just tried them today and no joy :twisted: i am putting this down to flakey t-mobile GPRS service and will try again later today.
Device Information output:
ROM version: A.30.09 ENG
ROM date: 01/01/04
Radio Version: A.33.02
Protocol Version: 1.3.3
Click to expand...
Click to collapse
Glad to hear you got it working!
GPRS has been giving me the fists here in LV (is it ROM, is it the radio stack..upgrade..downgrade..what hell is going on)! :evil:
I finally called T-Mobile this morning to see what was going on and they told me that they were having system wide problems, O really!
Anyhow I'm up and running with A.30.09 ENG as you can see by my Sig.
I have recently upgrade my X01HT to WM6... tried both the latest release of Pro Black 2.0 and LVSW... Both were excellent! However, I ran into problem with 3G/HSDPA connection and when viewing my local provider's portal... I am living in HK and while I was on the old Dopod HK WM5 Rom, I was able view the provider's (Smart-tone) portal w/o scrolling left & right. As well, the link for streaming contents are visible. While I am connected to the portal, the connection will drop but automatically re-connect... Have applied the HK Network Wizard extracted from the WM5 ROM and all network settings were applied successfully.
I have read PAPPL's post about browser.dll, http://forum.xda-developers.com/showthread.php?p=1198850#post1198850... Still not able to get what I used to see on WM5 Rom.
Please shed some light on how the providers usually detect the model of the device and it's capability? I suspect my provider is unable to identify my device and thus failed to adjust it's content to fit the screen, as well as to display the streaming content...
Any suggestions/comments would be highly appreciated!
***************
ROM: Pro Black 2.0
Radio: 1.38.00.10
Protocol: 32.71.7020.12W
ccanddl said:
I have recently upgrade my X01HT to WM6... tried both the latest release of Pro Black 2.0 and LVSW... Both were excellent! However, I ran into problem with 3G/HSDPA connection and when viewing my local provider's portal... I am living in HK and while I was on the old Dopod HK WM5 Rom, I was able view the provider's (Smart-tone) portal w/o scrolling left & right. As well, the link for streaming contents are visible. While I am connected to the portal, the connection will drop but automatically re-connect... Have applied the HK Network Wizard extracted from the WM5 ROM and all network settings were applied successfully.
I have read PAPPL's post about browser.dll, http://forum.xda-developers.com/showthread.php?p=1198850#post1198850... Still not able to get what I used to see on WM5 Rom.
Please shed some light on how the providers usually detect the model of the device and it's capability? I suspect my provider is unable to identify my device and thus failed to adjust it's content to fit the screen, as well as to display the streaming content...
Any suggestions/comments would be highly appreciated!
***************
ROM: Pro Black 2.0
Radio: 1.38.00.10
Protocol: 32.71.7020.12W
Click to expand...
Click to collapse
Generally the pages use the string returned by the browser to determine what it can do....i THINK it returns Mozilla4.0 or something along them lines when you can view pages with images etc....
I havent tried the browser.dll thing to see if it works as i cna still only see the text version of the O2 portal here in UK.
Prior to updating to AKU3.3 (then later WM6) it worked nicely.
Thanks, mrvanx... Your documentations are excellent... Thumbs up for YOU!
What I can do is to downgrade back to WM5 and pull the corresponding registry entry.... only concern is, if the upgraded IE Mobile version? within WM6 may have anything to do with that... struggling...
ccanddl said:
Thanks, mrvanx... Your documentations are excellent... Thumbs up for YOU!
What I can do is to downgrade back to WM5 and pull the corresponding registry entry.... only concern is, if the upgraded IE Mobile version? within WM6 may have anything to do with that... struggling...
Click to expand...
Click to collapse
the reg entry hack doesnt work from AKU3.3 onwards
from what ive read its returned using browser.dll in later versions
mrvanx, wonder if the browser.dll from WM5 (the version that used to work) would help with proper screen formatting on WM6? I have tired to pull a copy from another device running WM5 but it's locked... As well, the file is named something different, like browser.86.dll... Is there a way to extract the copy? Thanks in advance...
Hi all - sorry about this, but I'm new to this. Got an Orange M700 - still running the original Orange branded WM5 OS: yup, Orange have mangled it. I've been reading the (many...many...many) threads and the wiki and... well I think I'm more confused than ever.
So, just wondering if someone can advise me on the best route to upgrade, and bear in mind I'm a graphics guy....
So, briefly
from the Orange WM5, is there a straight one-step upgrade to WM6?
What .cabs/versions should I be looking for? -> I know there are many you guys have tuned. I guess I'm looking for a fairly standard one? Unless you think otherwise!
Are there any major caveats (other than warranty/support invalidation)?
Need a little hand-holding...
Thanks in advance.
Hi, welcome..
I have M700 too, took the plunge a while back and loaded one of Mun's ROM's.
All I did was install activsync onto my pc and hook up the phone for the first time, once that ran its course I unplugged the phone powered down and removed the sim & sd card and then powered back up again.
Once up n running I plugged it back into the pc and ran the rom I had chosen, yes I was worried it might go wrong but I have to say it was and is very simple n straight forward. There is a WM5 Orange backup rom on here so if you ever did need to send back then you can flash this back onto the phone so it "looks" normal, tbh I'd doubt it would come to that.
I was using XP-SP2 at the time, not sure of anything different for Vista but that's where others here will put you straight, since then I have altered rom many a time and finally settled for Tom's Black'n'Blue - nice and fast and room to add what I want to add rather than be given. Oh and also update the radio rom to the latest version too, pretty much the same method.
Have a look at the roms and decide what you want Happy modding...
Only "gotcha" try and flash from XP, it is rumored to be problematic on a vista PC.
Also be warned flashing ROMs can be addictive, think i have tried 8 or 9 on my Trinity to find one i like, have yet to try the MUN one suggested in the previous post, looks like it will be next.
Ah, twas an early Mun rom and was WM5 - like I said the very first rom I'd flashed so I wouldn't flash to that now
Also realised why i hadn't tried it, i have tried several 6.1 ROMs and none of the WM6 ones. Probably will now i think about it though.
spv m700
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Mattster_spv said:
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Click to expand...
Click to collapse
First of all, welcome!
You have to know that the key to knowledge is searching, reading, and if none of those work, asking through posting!
So, happy enlightment and enjoy your device!
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
nealed said:
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
Click to expand...
Click to collapse
Thank you, and all others who have responded, for your greatly appreciated advice! I've been trying to get my head around the process. Have backed up using PIM backup and settings saviour... and with your hand holding, am about to dive into the world of modding!
It's a little daunting for a newbie (and I really do mean a newbie!), but with everyones help, and this fantastic community as a resource, bah, watch me fly! (I'll probably be back tomorrow asking how I can de-brick the phone ;O) )
Thanks again all.
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
mkOnKeY bOy said:
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
Click to expand...
Click to collapse
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
tnyynt said:
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
Click to expand...
Click to collapse
Once more, thanks to all who've helped me over the threshold - the data connection must have been an issue with the signal, as this morning it was happy to connect to mms/internet via 3G/GPRS and HSDPA (which I didn't even know Orange supported).
Cheers all. Your help has been absolutely spot-on. It's refreshing to come to a community where you not only happy to help newbies, without the usual sarcasm or pomposity you find elsewhere, but you do so in a clear and concise way that really does help.
Thanks all. Look what you've gone and started now... !!!
One happy newbie stepping out into a brave new world...
---edit---
please delete this post
have fun with your spv
I have a problem, and the more I search the forums, the more I worry it may be due to an upgraded Rom.
The original owner of the spv m700 I just bought has by the looks of it debranded it and installed WM 6.1:
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
With Tomtom 6 installed and seemingly working, the GPS receiver is not being detected. I have done what the forums say, i.e. selected "NMEA GPC receiver", get a screen with:
COM3: GPS in COM9
COM7: RIL on COM6:
S2410 IRDA
I have clicked on the first option (COM 9 is recommended), but still no GPS device found, indoors or out, after 10 minutes of trying
Like I say, much info says the above should solve it, but others say an upgrade can knock out the GPS and it needs to have a different ROM reinstalled. Never done this before, and there may be an easier solution?
Help anyone.... please.......?!
I'm not 100% sure but I think your radio rom needs upgrading to support GPS - I'm sure the one's that do have 11 at the end of them..
Really?? It would be great to finally reach a soultion!
Can someone verify if this is true and if so, what do I have to do??
Thanks.
Hi Monkey Boy and all.
I think I'm in a similar situation that you were...
The original owner of my new spv m700 debranded it, unlocked it (by flashing an old radio ROM) installed WM 6.1. I now fear that the reason tomtom detests no GPS device is because the radio may need updating too... (see below for the spec on my phone at the moment).
Have you discovered which is the best radio to update to?
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
All advice and recommendations welcomed. I have never flashed anthing before so this is all new to me, but I like to think I learn fast...
Thanks,
Matt
http://forum.xda-developers.com/showthread.php?t=293957
Original owner would have done this to unlock it, so all you have to do is search for the latest radio rom and flash that to your phone - there are guides how to do this in here..
Radio ROM
http://forum.xda-developers.com/showthread.php?t=325197&highlight=radio+flashing
Guides
http://trinityguides.info/index.php?option=com_content&task=category§ionid=4&id=31&Itemid=66
Hey Trixter.
Thanks for the reply.
I managed to get in touch with the original owner and he sent me a link to an an .exe file which I downloaded, ran whilst activesynced to my phone, and voila! I now have radio ROM 1.50.08.11. Tomtom 6.03 now successfully works using settings "other NMEA GPS receiver" with "GPS baud rate 115200" and "GPS in Com9"!
I'm a novice and bought the phone as a "pimped up" spv m700. But I'm learning loads since joining thanks to people like your good self answering posts, so thanks.
Matt
Thanks to seeing your signature I'm sorted! If you read anyone else with the same problem, I hope my experience helps them.
Thanks again for your time,
Matt.
Hello,
I have searched hours to have a blackberry client working on my Artemis :
- have tried many versions
- have tried different ROMs from Meschle
Everytime I have same result I cannot connect to Blackberry and the black berry client does not show any service...
Anyone have HTC P3300 (Artemis) with working Blackberry client?
Please advise I I really need this for my work...
My current configuration :
HTC Artemis P3300 unlocked
Meschle's ROM 4.02 Lite w CUBE
I live in the czech republic and my SIM card is a T-Mobile one with all services activated (BlackBerry + Edge...)
Thanks
---
Jeremy
look in this thread
http://forum.xda-developers.com/showthread.php?t=369269
Dont work
Thanks for reply but I already read this post among many others it does not work on my Artemis... still cannot connect or get an IP...
How to know which version of radio i have? is it on boot screen?
Thanks
I have an Artemis and I am using the blackberry functionality successfully. Here is a site where you can find all information about HTC and blackberry:
http://sems.org/entry.asp?ENTRY_ID=276
Under Start-Settings-System-Device Information you can find all information required about the OS etc. of your Artemis. I use the 03.07.90 Radio version and it works fine for me. I use the Artemis Touch 3.01 Rom. Apparently nobody has been able to run the blackberry connect under WM 6.01.
For me it was crucial, to ask your IT department to re-activate my Blackberry account. Before, nothing worked and since then, it is quite stable. I use 4.0.0.97.
Hope this helps.
WM5?
Thanks a lot for reply.
So are you advising me to flash my device with a ROM containing WM5?
I would do it if I find that I can use BlackBerry as this is very important for me...
Are there any big differences between WM5 and WM6? Would I lack anything by downgrading ROMs?
Currently I have Artemis Touch 4.02 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0) (Lite)
Thanks again.
---
Jeremy
As mentioned, Blackberry connect does not work with WM6.1, but does with WM6. I am using
Artemis Touch 3.01 Rom
which is based on WM6.
All OK
So I downgraded ROM from 4.02 Lite WM6.1 to 3.01 Lite ...
Then I installed BB Connect (same version as you as all others don't work with this ROM and my device)
Finally I got the everything working!!! What a releaf !!!
Thanks a lot!!
Nevertheless I am looking forward for next ROM from Meschle which will be compatible with newer releases of the BB Client...
Best regards,
P.S. I also tweaked registry in order to save my corporate emails to storage card instead of main memory!!
P.S.2 : Didn't you notice that your device is slower after installation of black berry services?
How did you do the tweak of the registry?
In some instances, my Artemis has become slower, sometimes it even seems, it hangs up. But it seems that this is the price to pay.
BTW, HTC and RIM have now entered into a strategic partnership and all future HTC models should be automatically provided with Blackberry connect. Thus we might see an updated version of Blackberry connect sonn, that also works with WM6.1.
...
Hey,
Thanks for update...
I have modified the registry this way :
1- add "PropertyPath" value="\Storage Card\Mail" datatype="string"
to this place in Registry : HKLM\System\Inbox\Settings
*** Note : Do not put quotes in the value... ***
*** You can edit registry with many editors such as PHM or TRK ***
2- Create a folder Mail in on your storage card
3- Copy whole content of \Windows\Messaging in the new created folder \Storage Card\Mail
4- Finally after you do this make sure that you take away the messaging today plugin from today screen (important... you can put it back after soft reset)
5- Soft Reset
-----------------------------
I have another problem now with the BB Connect. Since I installed it everything is fine just I have to unlock my phone every 30 min using a password. This is very annoying as you have to open keyboard and enter password everytime you dont use your phone for some time...
Do you have this as well?
Is there any way to disable locking of phone?
Thanks
Solved
I have solved the password issue :
I downloaded MEMMAID application which is able to manage system services and I manually stopped the BlackBerry Security service.
Be careful though this is a powerful piece of software which can really harm your device if misused...
advice : do not change the service startup type (auto/manual) just stop the service after each Soft Reset otherwise you will not be able to use your device after soft reboot.
I managed to get my Blackberry Connect working on my P3300. Here are the details:
HTC P3300 (purchased in India)
Artemis Touch 4.02 ROM
Radio 3.08.90
Blackberry Connect Version 4.0.0.97
Device Id set to HTC_P3300
HKLM\System\Version\AKU = .0.3.1
Carrier = Airtel India (http://www.airtel.in/wps/wcm/connect/airtel.in/Airtel.In/Home/ForYou/BlackBerry/)
Connecting to BES on Exchange at company workplace.
I see email, calendar, notes and contacts synced from my Outlook.
Thanks to all for the data/input on versions/radios, etc.
tip
Hey,
I updated ROM (6.1) and for some reason the connection would last few seconds and then I would loose IP address...
Long time I didn't know what to do and even going back to original working ROM it didn't work...
Finally, I deleted my internet connection and soft reset.. HOP the connection was up and running again
So now I will add again my internet GPRS connection (for www and other games/weahter...) and will see... Probably I have to setup some sort of exceptions in the lists to prioritize BlackBerry somehow...
Cheers.
BTW, BlackBerry works with WM 6.1 ! Also there is new version 4.0.0.100 which works as well for me.
Hi all,
I have succesfully flashed Gen.Y D2 R1.25 on my Diamond (I came from original dutch HTC rom)
current:
ROM: 2.07.Gen.Y NLD
Radioversion: 1.09.25.23
The rom works pretty smooth except for the internet, and active-sync:
- My diamond cannot connect to the internet. At the top of the screen, it does connect, but it just connects to G, instead of HSPDA as previous.
When i try an application that uses internet, i get a warning that the diamond has no internet-connection.
May be with the new rom, there also comes a new radio version? a version that my diamond/provider is not compatible with?
- When i try to connect with my laptop via active sync, my diamond wants to start a shared internet-connection, while not asking for it. I have to box
'ask me for connection-type, when i connect' checked. But the screen where i can choose the connection-type does not appear. So no active-sync, no Radio-update
I hope someone can help me with this, there is probably an easy solution, ive read a whole bunch of topics, but didnt find anything usefull.
Grtz