Related
hey everyone i recently purchased a cingular 8525 with wm5 and decided that it would be a good idea to upgrade to wm6 (don't know exactly why but i did it) anywho... after i did so i found out that the wifi does not work anymore and i'm new at this so i have no idea what could possibly be the prob. Before i upgraded the os, wifi worked like a charm didn't really have to configure it or anything just detect settings and available wireless signals etc and that was it. pleeeez ppl who ever knows what i'm talking about please pretty please help cuz this is annoying me
Hi
Which ROM did you upgrade to, also, did you flash HardSPL before that? which Radio ROM are you running, and does the WIFI actually turn on when you use the comm manager?
I upgraded to the WM6 Cingular USA version, I did not flash HardSPL before that. I assume that unless the upgrade from wm6 changed the Radio ROM I am running, I’m still running the same one that comes with the version of wm5 that came with the phone when I bought it (btw what is a radio rom? Sry for my ignorance) And yes the WIFI actually turns on when I use the comm manager in fact it all seems to work fine but I just cant access the internet with it, even though it detects a signal. It stopped working the moment I upgraded to wm6
After flashing roms I had the same problem..make sure under the tab network adapters the line that says My network cards connects to..is set on internet..most roms start out with it on work..that change always works for me
So i deceided to downgrade the rom from wm6 to wm5 and yes apparently it has something to do with the rom version because my wifi connection works again!! with the old version which is wm5, but the moment I upgraded again to v6 it stopped working and like I said everything in the settings seems to be working fine, there’s just no internet, I should just be happy with the old version of windows mobile but version 6 has some features that I really liked does somebody know why this is happening? and if yes is there a solution? It might b more obvious than I think but I really don’t know so I really appreciate those who post help and advise thank you!
Put it back to WM 6.0..we will figure out what is wrong. There are alot of really good people on this forum and the answer to your problem is here. WM 6 is so much better.
Thanx for the support and the advise. So i installed another version of wm6 this one seems to be for Dopod but at least the internet works!!, the one i previously installed was an official version of wm6 for cingular which like i said before, for some strange reason i was not able to use the internet with wifi my only concern with having this Dopod version is that... well... its for the Dopod and does not come with the features that cingular offers to AT&T/ cingular users like myself. But then again it seems like everything else works just fine I just wonder why the cingular version doesn't work?
Sounds like your a little new to this. Here one of the golden rules:check out the hermes wiki and learn alittle about the flashing process and the different roms and their settings. There are alot of good roms out there that set up for ATT users, like K's Rom ,which is what I've been using for months. Works fine right after flashing. It has the right amount of programs and tweaks. Do alittle research and it will be worth it. It may take a couple different roms to find what you are looking for. Make sure you HardSpl your phone(the guide of flashing is in the wiki) Good Luck
i second blackout128's post
read the wiki
install hard spl
flash to your hearts content!
although, make sure you read the threads first! good luck and welcome to hotel d'hermes!
siskus said:
I upgraded to the WM6 Cingular USA version, I did not flash HardSPL before that. I assume that unless the upgrade from wm6 changed the Radio ROM I am running, I’m still running the same one that comes with the version of wm5 that came with the phone when I bought it (btw what is a radio rom? Sry for my ignorance) And yes the WIFI actually turns on when I use the comm manager in fact it all seems to work fine but I just cant access the internet with it, even though it detects a signal. It stopped working the moment I upgraded to wm6
Click to expand...
Click to collapse
Had same problem with WIFI using (RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe) ROM. Had to disable the Cingular proxy. Select: START-PROGRAMS-PROXY MANAGER-DISABLE PROXY. After that, was able to connect to the internet with WIFI.
Hi all - sorry about this, but I'm new to this. Got an Orange M700 - still running the original Orange branded WM5 OS: yup, Orange have mangled it. I've been reading the (many...many...many) threads and the wiki and... well I think I'm more confused than ever.
So, just wondering if someone can advise me on the best route to upgrade, and bear in mind I'm a graphics guy....
So, briefly
from the Orange WM5, is there a straight one-step upgrade to WM6?
What .cabs/versions should I be looking for? -> I know there are many you guys have tuned. I guess I'm looking for a fairly standard one? Unless you think otherwise!
Are there any major caveats (other than warranty/support invalidation)?
Need a little hand-holding...
Thanks in advance.
Hi, welcome..
I have M700 too, took the plunge a while back and loaded one of Mun's ROM's.
All I did was install activsync onto my pc and hook up the phone for the first time, once that ran its course I unplugged the phone powered down and removed the sim & sd card and then powered back up again.
Once up n running I plugged it back into the pc and ran the rom I had chosen, yes I was worried it might go wrong but I have to say it was and is very simple n straight forward. There is a WM5 Orange backup rom on here so if you ever did need to send back then you can flash this back onto the phone so it "looks" normal, tbh I'd doubt it would come to that.
I was using XP-SP2 at the time, not sure of anything different for Vista but that's where others here will put you straight, since then I have altered rom many a time and finally settled for Tom's Black'n'Blue - nice and fast and room to add what I want to add rather than be given. Oh and also update the radio rom to the latest version too, pretty much the same method.
Have a look at the roms and decide what you want Happy modding...
Only "gotcha" try and flash from XP, it is rumored to be problematic on a vista PC.
Also be warned flashing ROMs can be addictive, think i have tried 8 or 9 on my Trinity to find one i like, have yet to try the MUN one suggested in the previous post, looks like it will be next.
Ah, twas an early Mun rom and was WM5 - like I said the very first rom I'd flashed so I wouldn't flash to that now
Also realised why i hadn't tried it, i have tried several 6.1 ROMs and none of the WM6 ones. Probably will now i think about it though.
spv m700
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Mattster_spv said:
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Click to expand...
Click to collapse
First of all, welcome!
You have to know that the key to knowledge is searching, reading, and if none of those work, asking through posting!
So, happy enlightment and enjoy your device!
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
nealed said:
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
Click to expand...
Click to collapse
Thank you, and all others who have responded, for your greatly appreciated advice! I've been trying to get my head around the process. Have backed up using PIM backup and settings saviour... and with your hand holding, am about to dive into the world of modding!
It's a little daunting for a newbie (and I really do mean a newbie!), but with everyones help, and this fantastic community as a resource, bah, watch me fly! (I'll probably be back tomorrow asking how I can de-brick the phone ;O) )
Thanks again all.
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
mkOnKeY bOy said:
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
Click to expand...
Click to collapse
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
tnyynt said:
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
Click to expand...
Click to collapse
Once more, thanks to all who've helped me over the threshold - the data connection must have been an issue with the signal, as this morning it was happy to connect to mms/internet via 3G/GPRS and HSDPA (which I didn't even know Orange supported).
Cheers all. Your help has been absolutely spot-on. It's refreshing to come to a community where you not only happy to help newbies, without the usual sarcasm or pomposity you find elsewhere, but you do so in a clear and concise way that really does help.
Thanks all. Look what you've gone and started now... !!!
One happy newbie stepping out into a brave new world...
---edit---
please delete this post
have fun with your spv
I have a problem, and the more I search the forums, the more I worry it may be due to an upgraded Rom.
The original owner of the spv m700 I just bought has by the looks of it debranded it and installed WM 6.1:
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
With Tomtom 6 installed and seemingly working, the GPS receiver is not being detected. I have done what the forums say, i.e. selected "NMEA GPC receiver", get a screen with:
COM3: GPS in COM9
COM7: RIL on COM6:
S2410 IRDA
I have clicked on the first option (COM 9 is recommended), but still no GPS device found, indoors or out, after 10 minutes of trying
Like I say, much info says the above should solve it, but others say an upgrade can knock out the GPS and it needs to have a different ROM reinstalled. Never done this before, and there may be an easier solution?
Help anyone.... please.......?!
I'm not 100% sure but I think your radio rom needs upgrading to support GPS - I'm sure the one's that do have 11 at the end of them..
Really?? It would be great to finally reach a soultion!
Can someone verify if this is true and if so, what do I have to do??
Thanks.
Hi Monkey Boy and all.
I think I'm in a similar situation that you were...
The original owner of my new spv m700 debranded it, unlocked it (by flashing an old radio ROM) installed WM 6.1. I now fear that the reason tomtom detests no GPS device is because the radio may need updating too... (see below for the spec on my phone at the moment).
Have you discovered which is the best radio to update to?
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
All advice and recommendations welcomed. I have never flashed anthing before so this is all new to me, but I like to think I learn fast...
Thanks,
Matt
http://forum.xda-developers.com/showthread.php?t=293957
Original owner would have done this to unlock it, so all you have to do is search for the latest radio rom and flash that to your phone - there are guides how to do this in here..
Radio ROM
http://forum.xda-developers.com/showthread.php?t=325197&highlight=radio+flashing
Guides
http://trinityguides.info/index.php?option=com_content&task=category§ionid=4&id=31&Itemid=66
Hey Trixter.
Thanks for the reply.
I managed to get in touch with the original owner and he sent me a link to an an .exe file which I downloaded, ran whilst activesynced to my phone, and voila! I now have radio ROM 1.50.08.11. Tomtom 6.03 now successfully works using settings "other NMEA GPS receiver" with "GPS baud rate 115200" and "GPS in Com9"!
I'm a novice and bought the phone as a "pimped up" spv m700. But I'm learning loads since joining thanks to people like your good self answering posts, so thanks.
Matt
Thanks to seeing your signature I'm sorted! If you read anyone else with the same problem, I hope my experience helps them.
Thanks again for your time,
Matt.
Hello,
I have searched hours to have a blackberry client working on my Artemis :
- have tried many versions
- have tried different ROMs from Meschle
Everytime I have same result I cannot connect to Blackberry and the black berry client does not show any service...
Anyone have HTC P3300 (Artemis) with working Blackberry client?
Please advise I I really need this for my work...
My current configuration :
HTC Artemis P3300 unlocked
Meschle's ROM 4.02 Lite w CUBE
I live in the czech republic and my SIM card is a T-Mobile one with all services activated (BlackBerry + Edge...)
Thanks
---
Jeremy
look in this thread
http://forum.xda-developers.com/showthread.php?t=369269
Dont work
Thanks for reply but I already read this post among many others it does not work on my Artemis... still cannot connect or get an IP...
How to know which version of radio i have? is it on boot screen?
Thanks
I have an Artemis and I am using the blackberry functionality successfully. Here is a site where you can find all information about HTC and blackberry:
http://sems.org/entry.asp?ENTRY_ID=276
Under Start-Settings-System-Device Information you can find all information required about the OS etc. of your Artemis. I use the 03.07.90 Radio version and it works fine for me. I use the Artemis Touch 3.01 Rom. Apparently nobody has been able to run the blackberry connect under WM 6.01.
For me it was crucial, to ask your IT department to re-activate my Blackberry account. Before, nothing worked and since then, it is quite stable. I use 4.0.0.97.
Hope this helps.
WM5?
Thanks a lot for reply.
So are you advising me to flash my device with a ROM containing WM5?
I would do it if I find that I can use BlackBerry as this is very important for me...
Are there any big differences between WM5 and WM6? Would I lack anything by downgrading ROMs?
Currently I have Artemis Touch 4.02 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0) (Lite)
Thanks again.
---
Jeremy
As mentioned, Blackberry connect does not work with WM6.1, but does with WM6. I am using
Artemis Touch 3.01 Rom
which is based on WM6.
All OK
So I downgraded ROM from 4.02 Lite WM6.1 to 3.01 Lite ...
Then I installed BB Connect (same version as you as all others don't work with this ROM and my device)
Finally I got the everything working!!! What a releaf !!!
Thanks a lot!!
Nevertheless I am looking forward for next ROM from Meschle which will be compatible with newer releases of the BB Client...
Best regards,
P.S. I also tweaked registry in order to save my corporate emails to storage card instead of main memory!!
P.S.2 : Didn't you notice that your device is slower after installation of black berry services?
How did you do the tweak of the registry?
In some instances, my Artemis has become slower, sometimes it even seems, it hangs up. But it seems that this is the price to pay.
BTW, HTC and RIM have now entered into a strategic partnership and all future HTC models should be automatically provided with Blackberry connect. Thus we might see an updated version of Blackberry connect sonn, that also works with WM6.1.
...
Hey,
Thanks for update...
I have modified the registry this way :
1- add "PropertyPath" value="\Storage Card\Mail" datatype="string"
to this place in Registry : HKLM\System\Inbox\Settings
*** Note : Do not put quotes in the value... ***
*** You can edit registry with many editors such as PHM or TRK ***
2- Create a folder Mail in on your storage card
3- Copy whole content of \Windows\Messaging in the new created folder \Storage Card\Mail
4- Finally after you do this make sure that you take away the messaging today plugin from today screen (important... you can put it back after soft reset)
5- Soft Reset
-----------------------------
I have another problem now with the BB Connect. Since I installed it everything is fine just I have to unlock my phone every 30 min using a password. This is very annoying as you have to open keyboard and enter password everytime you dont use your phone for some time...
Do you have this as well?
Is there any way to disable locking of phone?
Thanks
Solved
I have solved the password issue :
I downloaded MEMMAID application which is able to manage system services and I manually stopped the BlackBerry Security service.
Be careful though this is a powerful piece of software which can really harm your device if misused...
advice : do not change the service startup type (auto/manual) just stop the service after each Soft Reset otherwise you will not be able to use your device after soft reboot.
I managed to get my Blackberry Connect working on my P3300. Here are the details:
HTC P3300 (purchased in India)
Artemis Touch 4.02 ROM
Radio 3.08.90
Blackberry Connect Version 4.0.0.97
Device Id set to HTC_P3300
HKLM\System\Version\AKU = .0.3.1
Carrier = Airtel India (http://www.airtel.in/wps/wcm/connect/airtel.in/Airtel.In/Home/ForYou/BlackBerry/)
Connecting to BES on Exchange at company workplace.
I see email, calendar, notes and contacts synced from my Outlook.
Thanks to all for the data/input on versions/radios, etc.
tip
Hey,
I updated ROM (6.1) and for some reason the connection would last few seconds and then I would loose IP address...
Long time I didn't know what to do and even going back to original working ROM it didn't work...
Finally, I deleted my internet connection and soft reset.. HOP the connection was up and running again
So now I will add again my internet GPRS connection (for www and other games/weahter...) and will see... Probably I have to setup some sort of exceptions in the lists to prioritize BlackBerry somehow...
Cheers.
BTW, BlackBerry works with WM 6.1 ! Also there is new version 4.0.0.100 which works as well for me.
Maybe a stupid question...
I've used the search function, but dit not find any related article about my question.
Question:
Is it possible to install and run one of the HTC Diamond ROMs on this forum on a T-Mobile MDA Compact IV (the HTC Diamond from T-Mobile) or will this be the end of the MDA?
I read that the hardware of the MDA is the same as the Diamond, but that doesn't answer the question. Maybe someone already succeeded with installing and running a HTC Diamond ROM on the MDA.
Thanks for the answers!
I am new to flashing ROMs and have been reading the forums here to try and work out how to do it.
As far as I am aware, yes you can flash any ROM to your device. I believe you will need something called Hard SPL - and your updated ROM.
Still not sure what 'Radios' are though lol...
Yes it is possible to install htc roms on mda compact 4 because it is basically the same device, not 100% same but you can use all software from the diamond on your device. But read below the important things.
HARD SPL IS THE MOST IMPORTANT THING TO INSTALL OTHERWISE YOU WILL BRICK / DAMAGE YOUR DEVICE. CLICK HERE FOR LINK
2ND- you can choose an updated/cooked rom. whichever you like and follow the instruction given to flash basically simillar to hard spl.
From what I can work out I need the signed Hard SPL for ROMs which have been 'checked' and unsinged for anything else.
Can anyone shed any light on why I would need to flash a 'radio'?
OK! All of the stock Roms include the radio and most of the cooked Roms include one. But the radio is the software that allows your device to function as a phone/communications device. It is the GSM/GPRS/EDGE/3G/... communicator. So you will definitely want the radio ROM. If the radio is not included in the ROM that you flash, you can always flash the radio ROM by itself afterward (or before).
So did any of you manage to flash a Diamond ROM to MDA Compact?
I'm contemplating grabbing a German MDA unit and trying to flash a Diamond WWE into it.
Any suggestions?
yes it works fine.. as long as you carefully read and follow the steps you will be fine.
My mda compact 4 works well with 1.00.25.07 radio and rom which one you use of personal preference.. need to try a few and see which one you like.
I've just applied HardSPL 1.40 and the TLR Diamond Rom v3 to my UK T-mobile MDA Compact IV, no problems at all.
Applying this seems to have increased the amount of internal main storage to the same as the Diamond. as I understand it, the difference between the Diamond and the compact IV is the internal memory (not the 4Gb).
The Compact IV has 96mb for storage and the Diamond 128mb. This shows up as more like 117mb of usable on mine now i've flashed it, up from about 85mb.
Maybe someone else can confirm there's also increased, or is it a false reading?
The compact IV and diamond are identical. Only the shape is different. The reason why mda has less storage in ram is due to the crap tmobile put on.
flashed my MDA with the latest HTC ROM .. works perfectly .. didnt checked the rom
I'm also considering upgrading my stock UK T-Mobile MDA IV rom and really the only thing I'm worried about is that once done I won't have the correct settings to connect to the internet, etc. Are these settings retained? In other words will I be able to use my phone as normal straight after upgrading the ROM and/or radio?
Those settings are the least of your worries, they can be easily re-added.
Just to clarify, I'm not talking about general internet preferences (like font size, homepage and all that) but the settings t-mobile set for the phone to connect to their network (and GPRS, SMS, 3G network settings). For instance if I go into 'Connections' in the settings it says "T-Mobile Internet...This connection is pre-configured. It cannot be modified" Will these connection settings be retained after the ROM upgrade?
I also upgraded successfully my MDA with the latest HTC ROM. I used the unsigned HardSPL, with the signed one I did not manage.
After installation the phone asked me if I want to automatically reconfigure the internet access (or something like that), after that the T-Mobile Internet connection was back again. I guess this is a feature of the network/provider and it is not necessary something you need in your ROM.
sorinescu2000 said:
After installation the phone asked me if I want to automatically reconfigure the internet access (or something like that), after that the T-Mobile Internet connection was back again. I guess this is a feature of the network/provider and it is not necessary something you need in your ROM.
Click to expand...
Click to collapse
The Network Connection wizard make that happend, because its in the Rom, so its very handy because its make your networks settings for you! And you can flash a new rom every day if you want
the Wizard make the settings(not your network/provider)
Hi everyone...
Its a tinny help about roms radios ..
So now Im use the Diamond Projects V3.3 WWE, perfect, but before install this rom I used Duttys V2.2, and in this version and the new one of Diamond Projects, I had some erros I guess..
Cause, before I used those rom's my Wi-Fi work perfect, find all acess points for internet no problem. In this two versions, I saw the same bug I guess.
When you install those rom's after you align the screen, The device find your NETWORK like (COUNTRY: BRASIL / COMPANY: TIM) and ask if you want apply this configs... So the first time I had apply, perfect, the first time my Wi-fi find one acess point security.... But don't find the Wi-Fi I wanted, its Wi-Fi of my job. Before this two rom's I always connect in wireless here in my job, so after those rom's never more I found.
Oh, and I had try to don't accept those changes, but don't work too.. I can't find my Job Wireless? What's happen guy's? please help me...
My device shome this
R - 1.00.25.05 (this is RADIO right?)
G - 52.29.25.12H (this I don't know what is)
D - 1.93.00 (this is Hard-SPL wright? I had instal SPL-1.40 Olinex Unsigned)
Maybe this error can be about G-version?
How I can find my job wi-fi again? really ...
Now I don't find nobody... What I need do?? help me guy's.. pleasee!!!