Dear all,
My friend has a hx4700, it's in excellent condition and good working order except the backlight won't work at all - can't adjust the backlight what ever i did.
I have helped to upgrade the OS from wm2003 to Wm5.0 but the issue still can't fix.
Anyone can help?
Many thanks.
can anyone help?
Help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Im using WM6, a very good rom made by kozhura on my 4700 and i dont have that problem your having. Maybe a hardware fault? try flashing it with another rom or do a factory reset.
Related
Hi there,
I worked for a company who bought over 20 i-mate with ROM 1.66.
Unfortunately, we had about 5 devices which suffer from Hard-Reset few times each.
I read somewhere that the solution might be an upgrade to Rom 1.72
cuase the Hard Reset is a known issue of the 1.66..
I'm going to upgrade them devices soon, but would like you to device me
if the new Rom actually solve the Hard-Reset issue or not?
Thanks in advanced,
Tomer Eisner - CTO
HANDY IL
hi
bin using 172 for about 3 weeks and no problems here
thanks for your answer.
but, just one more quick question:
have you ever suffer from the Hard Reset issue
before the upgrade?
Are you familiar with the issue?
TOmer
rom 1.66 problem
my o2 xda2 used to have 1.66 rom. hard reset occurred to me like every day. i installed it back, then it would freeze, then hard reset itself. it happened 5 times. then i upgraded to 1.72 i-mate rom. it's bn 2 weeks, no problem so far.
hi again
never had the hard reset problem
as soon as i got my xda2 upgraded it to the orange 166 rom then when the imate one came out upgraded to that one.
hope it helps :wink:
Since I read a lot about radio and bluetooth improvements in rom 1.72, I would like to upgrade my T-Mobile MDA II (rom 1.60.00 wwe) too.
But I would also like to keep the 'special' T-Mobile application (as far as I know those are in extended rom).
Is it possible to use the only the radio and rom from for example the imate or qtek 1.72 rom and use the 1.60.36 extended rom included in the latest T-Mobile rom published?
(I know I will have to edit country codes and all, the question is just to know wheter or not putting together such a set will succeed)
Which 1.72 rom would be best: The Qtek one (released today) or the imate one?
:?:
My friend bought a brand new i-mate loaded with the 1.66 ROM and bootloader 1.06
He was suffering from the frequent Hard rest alot.
He tried upgrading to the latest 1.72 ROM but that didn't solve any problems. And the device seem to still go through frequent Hard Reset.
I am guessing this has something to do with the bootloader's version?
So my question is..
Is there anyone with the same bootloader's version (1.06) and same ROM version (1.66 or 1.72) also that have no Hard reset problems? :?
Thanks
Ok, I'm new to cooking but I know my phone works as I've been running it under the Xda SE rom for a couple months and thought I would have a go at running ppc2003.
So I installed the standard upgrade from siemens to get the radio stack upgraded and make sure that it would all work fine and then got the bright idea that I need to customize it to my tastes.
I cooked up a rom at lumpi's site and it all seems to work till I turn it off or it times out and turns itself off at which point it will not turn back on unless i perform a soft reset, not for sync, phonecall or power button press, although the led for the phone still flashes.
If anyone has any suggestions as to how to fix this with out reflashing it would be great as this seems to be the only problem.
Thank you in advance for any help that anyone can provide.
Rom Version: A.30.09 Eng
Rom Date: 01/01/04
Radio Version: A.33.02
Protocol version: 1.3.3
does it come on when you put power on it by any means of charging?
no it doesn't it the led just changes to orange as it normally does when its charging. I thought about that when I posted as I saw there was another guy that was having the same problem.
Similar problem
Apo11yon
I've got similar problem, all external buttons locked after using xdaunlock have now tried 4 cooked roms,coming round to idea that it may be battery fault(see my postings?!)
Silent D :? :x
actually yes that was the posting i was referring to I have cooked two roms with the same result that being everything seems to work fine until the unit is turned off and then it wont turn back on without a softboot, i know my battery is good as I mentioned and I did switch back to the standard version on ppc2003 and it does work fine so I'm pretty sure its a software related problem, I was just hoping someone out there might be familiar with the problem and have a solution.
cook a rom with no added programs, install, and see if you have a problems after. i had thevsame prob bc i cooked kse truefax into tmo 4.1.16. Reflashed my device with thevsame rom and progs -kse, and all is well....
good luck!
thanks for the advice in both of the roms that I built I included truefax so I would be inclined to think that that would be it.
no prob.
did a rebuild less the fax app and it works great, should be a notice on the site that it may cause difficulties even better would be a listing of apps that conflict with each other or possibly the os
thanks again for the help fellow
hi guys,
My friend got this M700 with the perfect conditions!
But after a hard reset, he had some trouble:
1. the speaker always turn ON, and couldn't be turned off
2. The radio FM can't work! He put jack into the mini USB port on M700 and try to turn on radio; but he received nothing. It had an error board but he doesn;t remember
3. When he put the jack for call or music, the sound goes out?
Please, if anyone had met these situations, Or anyone can solve these problems; please help him
Thanks alot!!!
Is there anyone could do him a help
NO reply?
Sob....
still wait for advices...
What rom do you have installed?
The WM5 original one or a coocked one?
If you still have WM5 maybe you should flash it with the original upgrade for WM6 or try a coocked one and see what happens.
Cheers
Thanks!!!
Actually, I have a ship ROM for M700! But this probs was still unsolved
I've tried many ROM without any success
Hi there,
I'm new in this forum and not yet an expert on all this items handled here. So maybe one of those great software guys can help me.
I got a present from my Chinese friend, it's a DOPOD P860 mobile branded for china mobile. As I'm german I tried to change the operating system to german or english. All those great tools worked fine for flashing procedure.
I tried original O2 ROM and some others like the one from Bepe. Also combined these with several Radio Rom. Operating system of the device works fine with nearly all of these Roms.
Problem remains:
The recognition level of the radio is low. As soon as I go into any building I will get a "no signal" message.
Is there anyone who can help me?
Thanks, wbr
i have the same problem
and STILL cant find a solution
I gave up to follow this.
I think it's impossible to solve this problem.
I already changed to Diamond 2 mobile.
wbr
Hello everybody!
I have noticed, there are problems with ActiveSync after ROM flashing appearing.
To be specific, ActiveSync activates itself automatically, without any obvious reason. ActiveSync window is also activated whenever an USB connector is used (thus also when charging only)!
I went through the several threads already, finding two fix-tips mentioned in there. However none of them seems to work in my case:
1) http://forum.xda-developers.com/showpost.php?p=2798581&postcount=4757
2) http://forum.xda-developers.com/showpost.php?p=2807581&postcount=4789
I have to admit, I am also surprised by the fact that I have the same problem independently on the ROM flashed (experienced with A.Z.T.O.R. V7 & SwiftBL Diamond V7.5 Full so far – that’s also the reason why I’ve decided to set this new thread).
Can somebody help me to solve this problem (which is obviously bothering more users already)?
Dou you have any explanation to this behavior?
FYI:
My initial ROM: O2 GE ROM 1.37
Actual ROM:
SPL: 1.40.OliNex
A.Z.T.O.R. V7 (previously SwiftBL Diamond V7.5 Full tested)
May the reason be some improper flash-procedure?
What is the reason of hard-reset after flash? (When it should be done?)
Many thanks for any replays in advance…
Hi !
I have the same problem.
I dont know if the problem was there in the officil ROM,
but i have Swift 7.5 ROM and it has the activesynckill,
but no result. ActiveSync starts on itself.
Hm, maybe someone find a resolution to this problem.
severoprisan said:
Hi !
I have the same problem.
I dont know if the problem was there in the officil ROM,
but i have Swift 7.5 ROM and it has the activesynckill,
but no result. ActiveSync starts on itself.
Hm, maybe someone find a resolution to this problem.
Click to expand...
Click to collapse
Search for Elias async killer
http://forum.xda-developers.com/showthread.php?t=436099&highlight=elias+async
Works fine for me.
Ciao, Andrea
The problem is that even after I close AS
it starts by itself without connecting the phone
to the pc. Is runing in the background. If I see it
I close it and after some time there it is again,
runing in the background.
So do I have the same problem and the solution mentioned above couldn't solve the problem.
Waiting for help, too.
Thanks
Genius2000 said:
Search for Elias async killer
http://forum.xda-developers.com/showthread.php?t=436099&highlight=elias+async
Works fine for me.
Ciao, Andrea
Click to expand...
Click to collapse
Hello Andrea,
thanks for the link to the Elias async killer. I'll try it ... however I would like to UNDERSTAND the thing! ;-)
I would like to know why there are SOME users having this problem, when some others never heard about it! There has to be some reason causing this kind of trouble...
I don't like using extra fix generally, I prefer finding the solution! ;-)
So, can anybody help, please?
EDIT: done.