T-Mobile Dash (WM6): Voice Command through Wired Headset? - HTC Excalibur

Hello all,
I have a T-Mobile Dash running WM6, and I'd like to use the voice command application through the wired headset that came with it. Is this possible, and if so, how do I set it up? I can activate it manually, but pulling the phone out of my pocket and holding the "home" key for a few seconds is not very convenient; I'd rather just hit the button on the headset. Not to mention this makes handsfree dialing while driving impossible...
I've already spent enough money on this phone without having to buy a bluetooth headset along with it, so any advice would be greatly appreciated. Thanks!
~truggl

I've hunted around and it looks like I would need to hack the registry on my Dash to use Voice Command with a bluetooth headset; is there a similar hack I could apply to make Voice Command work with a wired headset?
~truggl

Related

Bluetooth / Is there a way to get headset-profil for MDAIII?

Hello together,
because I want to work with Voice-Dial controlled from a BT-Headset, I try to find a solution for upgrading the BT-stack.
Also would this allow to use BT-Headset for music and video....(Mediaplayer,etc.)
Did anyone have an idea in which way we can integrate a headset-profil??
May be, anyone can post the related files and registry-entries from a other device, that uses Widcomm/Broadcom-Stack.
Thanx
Delfin
Handsfree - would be nice for the BMW Car BT as well
Yes, the handsfree Profile in the MDA III is missing and it hurts badly. I can't make it work with my BMW BT Carkit.
Does anyone know how to integrate Handsfree into the MDA III?
I alos would like to see this get fixed.
Just before this site had technical difficulties and lost several weeks worth of posts, there was a thread on this very topic.
It seem to me that progress was being made, but the current BT Profile only allows for Phone audio, not audio from device.
Even the not so good iPAQ 6315 had audion from device support.
I suppose first that I-Mate should fix the BT Profile all together, which is unstable on my PDA2K.
Just to clear this up....
The PDA2K does have handsfree profile. The profile only supports handsfree for phone.
What everyone is asking about is the ability to transfer audio from device to a bluetooth device (headset etc.). Is this profile called handsfree or something else, have read posts where someone mentioned it was called a different profile name?
Nighthawk said:
Just to clear this up....
The PDA2K does have handsfree profile. The profile only supports handsfree for phone.
What everyone is asking about is the ability to transfer audio from device to a bluetooth device (headset etc.). Is this profile called handsfree or something else, have read posts where someone mentioned it was called a different profile name?
Click to expand...
Click to collapse
...Hmmmm....
In a recent online conversation with a "club i-mate" tech rep- I asked about the so-called "Hands Free" profile they advertise the PDA2K as being compliant with....
ME: "My other bluetooth phone would allow me to simply speak the contacts name via my wireless headset and the phone would dial.....With my PDA2K I have to actually use the phone to dial out.......This is not a 'TRUE Handsfree OPeration'....."
Club i-mate: "True."
ME: "So the PDA2K doesn't really support 'Hands Free' profile as advertised, but rather ONLY 'Headset' profile?"
Club i-mate: "Yes."
I have been VERY pleased with all of my PDA2K EXCEPT for the Bluetooth functions. They totally dropped the ball with the Bluetooth on this device....
Interesting news.
Have you tried with voice software on the PDA2K?
Tomorrow (Saturday night now) I will break out the car kit and headset and see what I can learn. The car kit (nothing special, just Supertooth) allows both headset and handsfree, different button combo to activate.
Nighthawk said:
Interesting news.
Have you tried with voice software on the PDA2K?
Tomorrow (Saturday night now) I will break out the car kit and headset and see what I can learn. The car kit (nothing special, just Supertooth) allows both headset and handsfree, different button combo to activate.
Click to expand...
Click to collapse
Yes, I have Microsoft Voice Command on my PDA2K.
However, It requires activation by pressing a button on the PDA2K- and will only accept voice commands directly- via its own microphone- It will not activate/accept speech via a wireless headset, like ALL my previous bluetooth phones....
Again, this is not a true hands free mode- and it is entirely a limitation of the firmware/bluetooth radio stack Carrier Devices is using in the PDA2K at this time....
...for instance, with my SE T610, I could leave my phone in my jacket pocket or briefcase- in the trunk of my car, and still activate/voice dial anyone in my contact list simply by pressing one button on my wireless headset....
...as well, I could accept incoming calls just the same, as a tone would be heard in the headset, and a single press would accept the call. The PDA2K will not allow this. My PDA2K will not automatically find/activate my headset when an incoming call is made- it wont even let me use the headset 'unless' I have an active link to it- but when you keep an active link to ANY bluetooth headset and turn the unit off, it will repeatedly turn itself back on and run the battery nearly dead in a couple hours. I discovered this the hard way.
ABSOLUTELY USELESS bluetooth software in the PDA2K.....
I'm using SE HBH60 headset with Qtek 9090, if i receive a call and bt headset is off, i can just simply turn it on and press the button on the headset and the call is answered...If it's on already, i hear a ring in the headset and can answer the call by just pressing the button in the headset.
d3vil said:
I'm using SE HBH60 headset with Qtek 9090, if i receive a call and bt headset is off, i can just simply turn it on and press the button on the headset and the call is answered...If it's on already, i hear a ring in the headset and can answer the call by just pressing the button in the headset.
Click to expand...
Click to collapse
"...simply turn it on AND press a button on the headset and call is answered..."
Would you care to exaggerate here?
When I recieve calls, if I do not have an active link to my bluetooth headsets, I cannot answer with them... I must first go inot bluetooth manager and click on headset and click on 'connect'- which can take more than a few seconds each time I do....
I have tried this woth my Motorola, several Bluespoon's and my in-car handsfree system.... None will work unless the connection was made 'live' before the call, and then the PDA2K will not stay shut off, thus draining the battery...........
babj615 said:
Yes, I have Microsoft Voice Command on my PDA2K.
However, It requires activation by pressing a button on the PDA2K- and will only accept voice commands directly- via its own microphone- It will not activate/accept speech via a wireless headset, like ALL my previous bluetooth phones....
Click to expand...
Click to collapse
I think part of problem is the required button press, which isn't required on your other phones.
BlueAngel and BT Headset
d3vil said:
I'm using SE HBH60 headset with Qtek 9090, if i receive a call and bt headset is off, i can just simply turn it on and press the button on the headset and the call is answered...If it's on already, i hear a ring in the headset and can answer the call by just pressing the button in the headset.
Click to expand...
Click to collapse
When you have your bluetooth headset connected and the PDA enters the standby mode (for example, you don't use it for few minutes), if you receive a call does the headset automatically reconnect?
I'm using 9090 with Nokia HDW-3 BT headset, and I'm in trouble when I put my PDA in stand by leaving BT activated and the headset connected. It seems that after few minutes of standby the headset disconnects, but PDA's BT led is still flashing... Maybe is there any power saving feature in PDA's bluetooth stack so when in standby it disconnects the headset?
BMW bt car kit
The Xda IIs works fine with handsfree profile BT devices (such as car kits), I have personally tried it with a BMW built in jobby (X5) & a Nokia ck 7w. It also works fine with BT headsets.
I can only assume that the other providers/networks have made the same mistake that O2 did with the XdaII, i.e. use the Microsoft BT stuff which does NOT support hands-free, only headset profiles.
Perhaps one of the clever folk on here can suggest a way to get the O2 version on your phones?
BMW bt car kit
The Xda IIs works fine with handsfree profile BT devices (such as car kits), I have personally tried it with a BMW built in jobby (X5) & a Nokia ck 7w. It also works fine with BT headsets.
I can only assume that the other providers/networks have made the same mistake that O2 did with the XdaII, i.e. use the Microsoft BT stuff which does NOT support hands-free, only headset profiles.
Perhaps one of the clever folk on here can suggest a way to get the O2 version on your phones?
Also microsoft voice command does not support activation by bluetooth headsets, its not a fault of the imate, just no software to accept the voice dial command from the bluetooth headset
BMW BT with XDAII?
Would you please irblinx be more specific about how have you been able to made ANY kind of call through your XDAII?
My BMW series 5 built in BT hands free simply fails to Connect to the XDAII. I'm carrying a SE T68 just to use my car hands free system. Stupid way of using an 1000+ $ BMW extra.
Any help is wellcome!
:?
some confusion here (at least partly due to O2 giving the new model a confusing name!), the xda II does NOT work with car kits.
Only the new IIs works
Headset profile for PDA2K/9090
Sorry for my poor English
I need "HEADSET profile" for my PDA2K
Now all headset work with headset and hands free, but i nead "force" the headset mode with PDA2K
In headset mode (no hands free) I can use one headset for more devices, like PDA2K, notebbok, cellular phone.
In hands free mode the headset work with a device at time.
Regards

XDA2s and MS Voice Command 1.5

Hi all,
Does the XDA2s and Microsofts Voice Command work on a XDA2s?
I'm not English, but I'm sure my English is good enought!
Whenever I give a voice command I get a "please repeate" error..
I think it's something with the mic gain, but where and how do I set it lower? Enabling/Disabling the Microphone AGC settings did not really help!
Any suggestions?
You should rather forget about this application. I tried to use it but with no success, exactly like you. Then I tried other applications (with the same result) and finally I followed suggestions from this forum: Neuvoice - it works and it's cheap.
Rgds
Maciej L
Maciej L said:
You should rather forget about this application. I tried to use it but with no success, exactly like you. Then I tried other applications (with the same result) and finally I followed suggestions from this forum: Neuvoice - it works and it's cheap.
Rgds
Maciej L
Click to expand...
Click to collapse
Thanks Maciej L,
Yes I think I will dump it.. It really sucks...
Looks nice the Neuvoice. To bad there is no demo to test it 1st
Yes there is a demo version, just download the full version from somewhere and it works as demo until you purchase the unlock code (as far as I can remember - but I'm not 100% sure - so you should by yourself)
Rgds
Maciej L
XDA IIs Fonix Application
I have just received my XDAIIs upgrade from an XDA II and it comes complete with Fonix Voice Dial. It automatically records test voices against your contacts (name number) and then you can call it up any time. You can also record your own voice which makes it more efficient. It also works with bluetooth. It seems an OK applicaiton to me.
Is this what you have been talking about? :lol:
In a quiet environment, it really doesn't have any problems with recognizing my commands. As long as you don't have a terrible English accent. However, you can forget about if you are in a loud environment though.
of where you have downloaded it to you.
I don't find any demo in any place
greetings and thank you
XDA IIs Voice Software
I got mine with the XDA IIs cd but try Handango.com who have a good range of voice software including Vito Voice....
you have registered in your cd ?¿?
regards
Voice Command 1.5
well, I have to say MS Voice Command works great for me. 95% hit rate on about 1000 contacts in my xdaIIs. Even in the car. Far better that V1.01. A couple of tips from my experienece with it.
1. Make sure the microphone auto gain is "disabled"
2. If it initially has problems and hit rate is very low, a soft reset usually sorts it out
3. Map the "record" button to Voice Command for easier access.
4. If your car is noisy, use a wired head set while driving. (I have not been able to get the bluetooth voice dialing to work at this point)
Re: Voice Command 1.5
cbrow51 said:
well, I have to say MS Voice Command works great for me. 95% hit rate on about 1000 contacts in my xdaIIs. Even in the car. Far better that V1.01. A couple of tips from my experienece with it.
1. Make sure the microphone auto gain is "disabled"
2. If it initially has problems and hit rate is very low, a soft reset usually sorts it out
3. Map the "record" button to Voice Command for easier access.
4. If your car is noisy, use a wired head set while driving. (I have not been able to get the bluetooth voice dialing to work at this point)
Click to expand...
Click to collapse
Hmmm... With none of the Voice dial programs I've been able to get the bluetooth to work.. Not sure if it's the bluetooth unit itself, or if it's some ROM version thingy...
The BT headset is a SE HBH-600. The XDA2s is with ROM version 1.12.62 WWE and radio version 1.02.00.
Can/will this work with bluetooth voice dialing??
MS Voice Command & BT Voice Dialing
No, sorry, I have not been able to make it work. I think its still an issue with the implementation of the BT stack (in this case the Widcomm stack) on the HTC devices. I can establish a connect from my headset to the device, but does not "link up" with voice dialing.
I now use a regular noise cancelling wired headset in the car, via an adapter plug sold by PockPCTechs (www.pocketpctechs.com) Other wise just use the phone mic to initiate a voice command dialed call
Regards
Chris
Re: MS Voice Command & BT Voice Dialing
cbrow51 said:
Other wise just use the phone mic to initiate a voice command dialed call
Click to expand...
Click to collapse
I was going to ask how well this works?
I'm getting a BT car kit fitted literally in the next hour and was hoping I'd be able to voice dial like I could my old Nokia, while driving.
I am using
O2 xda2s with microsoft voice software
I have a fairly noisy sports car but it works well..
I have the voice mapped to contacts button so one press and direct voice towards pda and no botha.... about 95% hit rate on 200 contacts..
I must add it has only been that good since buying a brodgit car cradle so it positioned well.. obviously you have to turn stereo off
the only complaint i have with it is that when the voice speaks back to you to confirm what you have said I cant hear it very well..
does anyone know of any settings to improve audio levels..
cheers
stay happy
Hi Guys
I have upgraded my 'Voice Command' handsfree solution as follows.
1. Added an FM 'Sound Feeder' from Pocketpctechs, that connects to the xda via one of 2 different pocketpctechs audio adaptors.
2. Tune the radio to one of the 8 frequencies supported by the Sound Feeder and the xda then plays all audio output through the car stereo system. This works for all apps, including my Navman GPS and Media Player!. I also mapped a button (I used the record button) to Voice Command, so one press activates VC and I can initiate a call by voice from there.
The really nice thing about this arrangement is that if i have media player running through the system, and a call comes in, the music mutes automatically, the phone rings, and i can take the call. When you end the call, media player picks right up again!
3. For the microphone part, there are 2 options:
a. The one I am using right now, is to use the pocketpctech 'single' adaptor, that allows sound to play through the stereo, while keeping the mic of the xda active. This means the xda picks up your voice directly for voice command and telecons, while at the same time playing the sound you normally hear via headphones, through the stereo. This works great for the incoming voice, although you need to talk fairly loudly for the party calling to hear you well. Decent enough though...
b. The upgrade I will make this weekend is to use the 'dual' pocketpctechs adaptor. This one accepts the soundfeeder on one side, plus a regular 2.5mm heasdset on the other. This one disables the internal xda mic, and allows you to use the mic from the headset. So I plan to permantly position this mic (after cutting off the ear bud!) on the door pillar as in normal car hands free installs. This should improve the outbound sound a good bit....
Will let you know how I get on
Regards
Chris
In the end, the Parrot CK3100 car kit has its own built in voice recognition, so I have no worries
Great! I looked at the Parrot a while back. How much was it? Work ok?
Regards
Chris
Well, I've not really had chance to test it properly yet, seems to be good. Cost me £180 to have it fitted, the old one removed and a bit of extra power wired in for my GPS & PDA.
Hi Andy
Sounds good. Let us know how it works out for you. I am interested in how the bluetooth connection holds up. I am still having problems with my xda maintaining a connection with my bluetooth headset.
Regards
chris

voice command over bluetooth headset on xdaIIs

I have a O2 XDAIIs been tring to find what exactly I need to do to ativate voice command with my bluetooth headset I have being looking
through the forums but am unable to find the sollution if there is one can someone point me in the right dirrection PLEASE GOING NUTS
I don't think it is possible. Problems with the integratino of Windows Mobile and the Bluetooth Static/Profiles.
So, is this a Blue Angel Issue, a Windows Moblie SE isuse, or both?
If just a Windows Moblie SE Issue does anyone know if WM2005 corrects this?
Thanks!
Its a windows issue rather than a BA issue I think, however there is a partial solution.
Press the connect button on your BT headset as if you were answering a call; then press the "contacts" button on your BA. You should then be able to speak into your BT headset. Once finished, disconnect the BT headset as normal
Not perfect, but a reasonable workaround. I have my BA in a cradle in my car & hardly need to glance at it in order to find the contacts button & get nearly-handsfree operation
Its a windows issue rather than a BA issue I think, however there is a partial solution.
Press the connect button on your BT headset as if you were answering a call; then press the "contacts" button on your BA. You should then be able to speak into your BT headset. Once finished, disconnect the BT headset as normal
Not perfect, but a reasonable workaround. I have my BA in a cradle in my car & hardly need to glance at it in order to find the contacts button & get nearly-handsfree operation
Dear weasel,
I have tried what you have advised to get BT head set to activate voice command. However, it don't work. Is there any thing else that I can do? I really hope I can dial a call via BT haed set.
Thank you.

Has anyone used the earphone with Microsoft Voice Commands?

Hi All,
There are a lot of posts about getting a Bluetooth headset to work with Microsoft Voice Commands properly, I think we can say that unless there is a new bluetooth stack, we have given up hope.
However I wonder if this can be done with the earphone that comes with the Blue Angle, you can hear everything in it, all that is missing is MAPPING the earphone Button to the activate voice commands.
Thanks.

is this problem the phone or the headset

I have just obtained a Samsung BT wep210 which is brilliant 'cos it doesn't fall out of my ear. But although it has some handsfree functions, it doesn't do as much as my cheapo unit from ASDA. The Asda one allows me to use voice tags when I depress the button on the headset, but when I do the same on the WEP210 it instantly does a last number redial. Am I doing something stupid?
Thanks
Mike
Not all BT Headsets have the same funtions or same button functions. What does the manual say? My Samsung BT Headset does not give me the possibility to use Voice Dial, although i don't know which one i possess
Samson711 said:
Not all BT Headsets have the same funtions or same button functions. What does the manual say? My Samsung BT Headset does not give me the possibility to use Voice Dial, although i don't know which one i possess
Click to expand...
Click to collapse
the manual is poor but it definitely makes reference to voice dialling if the phone supports it - which it does as it's a XDA orbit
Also I have discovered that this (Samsung) headset, does not switch itself off if I leave it in the car and walk off with my phone. In one way this is good as I don't have to switch it on again when I get back in, but it makes me wonder how often I am going to have to recharge it.
Thanks
Mike

Categories

Resources